Maxime R. Dubois
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Maxime R. Dubois has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Joao Pedro Trovao
Université de Sherbrooke
3 shared publications - Jean Ruel
Département de génie mécanique et de génie industriel, Faculté des sciences et génie, Université Laval, Québec, Canada
2 shared publications - Adrien Letellier
Department of Electrical Engineering and Computer Engineering, Université de Sherbrooke, Sherbrooke, QC, Canada
1 shared publication Alain Desrochers
Department of Mechanical Engineering, Université de Sherbrooke, Sherbrooke, QC, Canada
1 shared publication- Alain Desrochers
Department of Mechanical Engineering, Université de Sherbrooke, Sherbrooke, QC J1K 2R1, Canada
1 shared publication - Geza Joos
McGill University
1 shared publication
Latest Publications
- 13 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (1) , 612-623
Calculation of Printed Circuit Board Power-Loop Stray Inductance in GaN or High di/dt Applications
This paper is concerned with the determination of parasitic inductance values in very fast switching power devices. To keep improving today's power converters, new technologies are studied, which exhibit very low switching times. The wide-bandgap semiconductors are among the key aspects of these improvements. Thanks to their internal properties, they allow very fast di/dt and dv/dt with very small footprint. Stray loop inductance needs to be kept low, as it creates high peak voltage upon switching of a transistor with fast di/dt . In particular, the stray inductance value with respect to the loop size and geometry needs to be calculated accurately at the design stage of the power converters. This paper analyzes three loop geometries and studies one with minimized stray inductance and optimal current distribution. An analytical method is proposed, which uses the Biot-Savart law for an accurate analytical estimation of the magnetic field intensity in the selected geometry, leading to inductance calculation. A comparison between the classical two-plate inductance estimation formula and the proposed stray inductance estimation is presented, proving more accurate value with the method proposed in this paper. Finally, an experiment has validated the new inductance estimation formula.
- 13 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (1) , 612-623
Calculation of Printed Circuit Board Power-Loop Stray Inductance in GaN or High di/dt Applications
This paper is concerned with the determination of parasitic inductance values in very fast switching power devices. To keep improving today's power converters, new technologies are studied, which exhibit very low switching times. The wide-bandgap semiconductors are among the key aspects of these improvements. Thanks to their internal properties, they allow very fast di/dt and dv/dt with very small footprint. Stray loop inductance needs to be kept low, as it creates high peak voltage upon switching of a transistor with fast di/dt . In particular, the stray inductance value with respect to the loop size and geometry needs to be calculated accurately at the design stage of the power converters. This paper analyzes three loop geometries and studies one with minimized stray inductance and optimal current distribution. An analytical method is proposed, which uses the Biot-Savart law for an accurate analytical estimation of the magnetic field intensity in the selected geometry, leading to inductance calculation. A comparison between the classical two-plate inductance estimation formula and the proposed stray inductance estimation is presented, proving more accurate value with the method proposed in this paper. Finally, an experiment has validated the new inductance estimation formula.
- 26 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 67 (1) , 315-326
Power Split Strategy Optimization of a Plug-in Parallel Hybrid Electric Vehicle
Hybrid electric vehicles (HEV), plug-in HEV (PHEV) need an energy management system (EMS) to ensure good fuel economy while maintaining battery state-of-charge (SOC) within a safe range. The EMS is in charge of the power split decision between the engine and the electrical motor. For a PHEV, the optimal power split scenario will depend on the driving cycle, initial SOC, and trip length. Heavy computation and accurate knowledge of the future trip are required to find the optimal power split control and this represents a significant difficulty for the development of an EMS. The aim of this paper is to propose a genetic algorithm (GA) that optimizes the power split control parameters for a given driving cycle in a relatively short computation time, thus, overcoming the problem of heavy computation. The methodology consists in 1) defining the control laws and their associated control parameters based on the observation of optimality obtained by dynamic programming; and 2) developing a GA that will be able to compute the near-optimal values of these parameters in a short time and for a given driving cycle. It is demonstrated that the GA provides short computational burden and near-optimality for a wide variety of driving cycles. It then offers a promising tool for a future real-time implementation.
- 26 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 67 (1) , 315-326
Power Split Strategy Optimization of a Plug-in Parallel Hybrid Electric Vehicle
Hybrid electric vehicles (HEV), plug-in HEV (PHEV) need an energy management system (EMS) to ensure good fuel economy while maintaining battery state-of-charge (SOC) within a safe range. The EMS is in charge of the power split decision between the engine and the electrical motor. For a PHEV, the optimal power split scenario will depend on the driving cycle, initial SOC, and trip length. Heavy computation and accurate knowledge of the future trip are required to find the optimal power split control and this represents a significant difficulty for the development of an EMS. The aim of this paper is to propose a genetic algorithm (GA) that optimizes the power split control parameters for a given driving cycle in a relatively short computation time, thus, overcoming the problem of heavy computation. The methodology consists in 1) defining the control laws and their associated control parameters based on the observation of optimality obtained by dynamic programming; and 2) developing a GA that will be able to compute the near-optimal values of these parameters in a short time and for a given driving cycle. It is demonstrated that the GA provides short computational burden and near-optimality for a wide variety of driving cycles. It then offers a promising tool for a future real-time implementation.
- 29 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (1) , 855-864
Application of Second-Order Sliding-Mode Concepts to Active Magnetic Bearings
Rotor mass imbalance is a common problem to rotating machines due to the unavoidable imperfections in manufacturing. These imbalance forces can be viewed as harmonic disturbances which lead to a periodic rotor runout during rotation. Furthermore, the runout length increases with the rotational speed squared. Moreover, for variable rotational speed applications, these harmonic disturbances are also time-varying. Active magnetic bearings (AMB) provide a means of actively attenuating these disturbances. Although various imbalance compensation schemes have been proposed in the literature to handle this problem, they are often more suitable for constant rotational speed applications where disturbances can be handled at a predetermined rotational speed. This study proposes the application of second-order sliding-mode control (2-SMC) to regulate AMB systems throughout a wide operating speed range. The proposed controllers are composed of two components. The first component is a linear controller for the sake of stabilizing the inherently unstable system, while the second component is a 2-SMC to handle the model uncertainties of the system as well as the exogenous harmonic disturbances. Simulation and experimental results are provided to demonstrate the effectiveness and superiority of the proposed techniques compared to the conventional linear controller.
- 29 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (1) , 855-864
Application of Second-Order Sliding-Mode Concepts to Active Magnetic Bearings
Rotor mass imbalance is a common problem to rotating machines due to the unavoidable imperfections in manufacturing. These imbalance forces can be viewed as harmonic disturbances which lead to a periodic rotor runout during rotation. Furthermore, the runout length increases with the rotational speed squared. Moreover, for variable rotational speed applications, these harmonic disturbances are also time-varying. Active magnetic bearings (AMB) provide a means of actively attenuating these disturbances. Although various imbalance compensation schemes have been proposed in the literature to handle this problem, they are often more suitable for constant rotational speed applications where disturbances can be handled at a predetermined rotational speed. This study proposes the application of second-order sliding-mode control (2-SMC) to regulate AMB systems throughout a wide operating speed range. The proposed controllers are composed of two components. The first component is a linear controller for the sake of stabilizing the inherently unstable system, while the second component is a 2-SMC to handle the model uncertainties of the system as well as the exogenous harmonic disturbances. Simulation and experimental results are provided to demonstrate the effectiveness and superiority of the proposed techniques compared to the conventional linear controller.
- 4 November 2014
- Published by Springer Nature in International Journal of Intelligent Transportation Systems Research
- Vol. 14 (2) , 101-114
Blended Power Management Strategy Using Pattern Recognition for a Plug-in Hybrid Electric Vehicle
- 4 November 2014
- Published by Springer Nature in International Journal of Intelligent Transportation Systems Research
- Vol. 14 (2) , 101-114
Blended Power Management Strategy Using Pattern Recognition for a Plug-in Hybrid Electric Vehicle
- Open Access
Reduced-Friction Passive Magnetic Bearing: Innovative Design and Novel Characterization Technique
Friction is mostly unwanted in rotating machines. In order to reduce its impact on the system, the integration of magnetic bearings is frequently regarded as a valid solution. In rotating systems like flywheel energy storage systems (FESS), mechanical losses created by mechanical bearings greatly reduce the overall performance. Magnetic bearings are thus frequently integrated in FESS to eliminate mechanical losses. The simple design of passive magnetic bearings (PMBs), their inherent security, and their very low friction make them perfect candidates for FESS. The main objective, and most important contribution of this paper, is to document an innovative PMB that minimizes energy losses induced by the axial thrust bearing, and to document the methodology used to measure its stiffness and damping. Although PMBs are fairly well documented in literature, no other PMB is designed to reduce the friction generated by the thrust bearing. In order to promote their integration, it is critical to identify their mechanical properties such as stiffness and damping. Hence, another contribution of this paper is to propose a new way to easily characterize any magnetic bearing topology to replace available techniques that only provided the properties for a precise configuration of the bearing. The new technique provides an unprecedented mapping of the forces generated by complex combinations of permanent magnets. Experimental results show that the new PMB can be configured to effectively reduce the force applied to the thrust bearing, resulting in lower friction. This friction reduction is achieved while allowing the proper operation of the bearing. Results also show that the measured stiffness is different from those obtained analytically, suggesting that a magnetic bearing should always be characterized prior to its use.
Open AccessReduced-Friction Passive Magnetic Bearing: Innovative Design and Novel Characterization Technique
Friction is mostly unwanted in rotating machines. In order to reduce its impact on the system, the integration of magnetic bearings is frequently regarded as a valid solution. In rotating systems like flywheel energy storage systems (FESS), mechanical losses created by mechanical bearings greatly reduce the overall performance. Magnetic bearings are thus frequently integrated in FESS to eliminate mechanical losses. The simple design of passive magnetic bearings (PMBs), their inherent security, and their very low friction make them perfect candidates for FESS. The main objective, and most important contribution of this paper, is to document an innovative PMB that minimizes energy losses induced by the axial thrust bearing, and to document the methodology used to measure its stiffness and damping. Although PMBs are fairly well documented in literature, no other PMB is designed to reduce the friction generated by the thrust bearing. In order to promote their integration, it is critical to identify their mechanical properties such as stiffness and damping. Hence, another contribution of this paper is to propose a new way to easily characterize any magnetic bearing topology to replace available techniques that only provided the properties for a precise configuration of the bearing. The new technique provides an unprecedented mapping of the forces generated by complex combinations of permanent magnets. Experimental results show that the new PMB can be configured to effectively reduce the force applied to the thrust bearing, resulting in lower friction. This friction reduction is achieved while allowing the proper operation of the bearing. Results also show that the measured stiffness is different from those obtained analytically, suggesting that a magnetic bearing should always be characterized prior to its use.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
Energy management & scheduling in a fast charging station for PHEV batteries
The current paper focuses on the energy management in a fast charging station for PHEV batteries; that uses in addition to the grid a flywheel energy storage and a supercapacitor; with main objective to minimize the duration of the battery charging process and the time required to recharge the storage devices afterward. The designed station is capable to recharge PHEV batteries with capacities lower or equal to 15 kWh from a minimum of 20% to a maximum of 95% of the battery state-of-charge in a maximum duration of 15 minutes. After a battery has been charged, a waiting period (during which no cars are allowed at the charging station) of a maximum duration of 7.5 minutes is required. During this period, the storage devices are being recharged to their maximum. A scenario displaying the charging process of two different PHEV batteries is presented with the simulation results.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
Energy management & scheduling in a fast charging station for PHEV batteries
The current paper focuses on the energy management in a fast charging station for PHEV batteries; that uses in addition to the grid a flywheel energy storage and a supercapacitor; with main objective to minimize the duration of the battery charging process and the time required to recharge the storage devices afterward. The designed station is capable to recharge PHEV batteries with capacities lower or equal to 15 kWh from a minimum of 20% to a maximum of 95% of the battery state-of-charge in a maximum duration of 15 minutes. After a battery has been charged, a waiting period (during which no cars are allowed at the charging station) of a maximum duration of 7.5 minutes is required. During this period, the storage devices are being recharged to their maximum. A scenario displaying the charging process of two different PHEV batteries is presented with the simulation results.