HAHenrique Vazão de Almeida

Henrique Vazão de Almeida

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Henrique Vazão de Almeida has a total of 108 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Alginate scaffolds functionalized with calcium-stabilized cubic zirconia nanoparticles for periodontal tissue engineering

    by Mafalda S. Santos, Carlos Ureña, Maria Teresa Rosa, Frederico Barbosa, Isabel Barahona, Cláudia L. da Silva, Daniela Nunes, Elvira Fortunato, Rodrigo Martins, Henrique Vazão de Almeida, et al.

  • Open Access

    Dityrosine photocrosslinking of native collagen bioinks for controlled shape-fidelity of bioprinted cardiac tissue constructs: probing the interplay between fibrillogenesis and covalent bond formation

    by Ana Nunes, Ankita Pramanick, Daniel Kelly, Rashmi Ramakrishnan, Vasileios Sergis, Vinh Khanh Doan, Hien Anh Tran, Khoon S Lim, Henrique Almeida, Andrew Daly

    Collagen bioinks are widely used in biofabrication, but their relatively soft mechanical properties can lead to structural instabilities under cell-generated contraction forces. While synthetic functional groups can be conjugated for covalent crosslinking, these methods often disrupt natural protein fibrillogenesis, thereby compromising collagen fibre architecture. This work presents a strategy for the direct covalent stabilisation of native collagen bioinks with dityrosine bonds via visible-light photocrosslinking with ruthenium (Ru) and sodium persulfate (SPS), avoiding the need for polymer pre-functionalisation. Multimodal characterisation, including high-resolution microscopy, spectroscopy, mass spectrometry, and nanoindentation, identified photocrosslinking conditions that enhance collagen fibrillogenesis and reduce off-target polymer oxidation. Interestingly, the biofabrication process itself affected ultimate collagen fibre architecture, with shear-induced alignment during extrusion enhancing fibril proximity and self-assembly, overcoming inhibitory effects the crosslinkers had on fibrillogenesis via ionic and electrostatic interactions. Leveraging these insights, embedded bioprinting was used to fabricate cardiac constructs with high cell viability (>80%), where dityrosine crosslinking could be tuned to modulate geometric shape changes under cell-generated forces (1-15% shrinkage). Finally, the platform was used to bioprint anatomically accurate double-ventricle human heart models with robust shape fidelity. This research establishes a versatile photocrosslinking framework for bioprinting cardiac constructs with tunable shape stability using native collagen bioinks.


  • Laser‐Induced Graphene: A Promising Conductive Platform for Cell Culture

    by Henrique Vazão de Almeida, José Manuel Inácio, Cláudia Pereira, Tomás Pinheiro, Tomás Calmeiro, Ricardo Correia, João Coelho, Joana Vaz Pinto, José António Belo, Rodrigo Martins, et al.

    Cardiovascular mortality remains a major health challenge. Cardiomyocyte (CM)‐based tissue engineering (TE) offers promising alternatives for developing therapies via in vitro models. However, the immature phenotype of CM in engineered tissues hampers progress. Recent studies introduce conductive materials like graphene to enhance CM maturation, but conventional graphene synthesis suffers from complexity, toxicity, and low yield. Laser‐induced graphene (LIG) provides a sustainable, cost‐effective, eco‐friendly solution with efficient conductivity and biocompatibility. A LIG‐based substrate is bioengineered in this study, hypothesizing that its conductive, anisotropic properties promote CM maturation and mimic the native cardiac niche. LIG is fabricated using a CO 2 laser with Parylene‐C as a precursor. Stem cells (SCs) and SC‐derived embryoid bodies (EBs) are cultured on LIG substrates, and their viability, metabolic activity, morphology, and protein expression are evaluated through immunofluorescence and electron microscopy. Both SCs and EBs maintain viability and activity throughout the culture. Moreover, EB‐derived CM exhibit spontaneous contraction and express cardiac‐specific proteins, confirming functional differentiation on LIG matrices. This first report demonstrates that LIG substrates support SC culture and differentiation, highlighting their potential in developing refined in vitro cardiac models and advancing regenerative therapeutic strategies. The findings support LIG as a transformative advancement in TE.


  • Open Access

    Integrated iontophoresis and sweat sensing via paper-derived laser-induced graphene soft conductors

    by Tomás Pinheiro, Henrique Vazão de Almeida, Daniela Nunes, Rodrigo Martins, Elvira Fortunato

    Rationally designed, paper-based laser-induced graphene soft conductors on polyurethane flexible support substrates are fabricated for applications in iontophoretic delivery of cholinergic agent carbachol and electrochemical sweat glucose sensing.


  • Open Access

    One-step production of laser-induced graphene via CO2 laser on agarose–lignin membranes

    by Beatriz S Machado, Maria Morais, Tomás Pinheiro, Jonas Deuermeier, Vasco Teixeira, Daniela Nunes, Rodrigo Martins, José M Inácio, Elvira Fortunato, Henrique V Almeida

    Laser-induced graphene (LIG) is a highly promising material for bioelectronics due to its excellent electrical conductivity, high surface area and biocompatibility. Nevertheless, the functionalization of biocompatible substrates with LIG is essential to propel the use of LIG-derived technologies forward in bioengineering. This study demonstrates the successful fabrication of LIG on agarose–lignin membranes using a single-step CO2 laser process. Membranes with 3 or 5 wt.% agarose, and 0.25 or 0.5 wt.% lignin were characterized for thickness and swelling degree to assess their behavior in a human-mimicking media. The LIG was comprehensively studied, measuring electrical and sheet resistance, and by employing techniques such as Raman spectroscopy, scanning electron microscopy (SEM) coupled with energy-dispersive x-ray spectroscopy (EDS), and x-ray photoelectron spectroscopy (XPS) to evaluate graphitization efficiency and investigate its physicochemical characteristics. Electrical measurements revealed that the lowest sheet resistance achieved was equal to 139 ± 2 Ω sq−1, with lower laser speeds (below 76.2 mm s−1) and higher power settings (above 2.5 W) leading to improved conductivity. SEM analysis revealed a three-dimensional porous structure with pore sizes ranging from nanometers to micrometers, contributing to enhanced electrical conductivity and suitability for bioelectronic applications. EDS mapping further identified carbon, oxygen, and sodium. XPS analysis provided detailed insights into the chemical states of carbon, indicating high-quality graphene formation. The integration of LIG with these flexible, biocompatible membranes highlights their potential for use in bioelectronic devices, including wearable sensors and implantable medical technologies. These findings underscore the potential of agarose–lignin-based LIG as a scalable, eco-friendly platform for future bioelectronic innovations.


  • Open Access

    One‐Step Laser Synthesis of Copper Nanoparticles and Laser‐Induced Graphene in a Paper Substrate for Non‐Enzymatic Glucose Sensing

    by Tomás Pinheiro, Joana Caetano, Elvira Fortunato, M. Goreti F. Sales, Henrique Almeida, Rodrigo Martins

    The synergy resulting from the high conductivity of graphene and catalytic properties of metal nanoparticle has been a resource to improve the activity and functionality of electrochemical sensors. This work focuses on the simultaneous synthesis of copper nanoparticles (CuNPs) and laser‐induced graphene (LIG) derived from paper, through a one‐step laser processing approach. A chromatography paper substrate with drop‐casted copper sulfate is used for the fabrication of this hybrid material, characterized in terms of its morphological, chemical, and conductive properties. Appealing conductive properties are achieved, with sheet resistance of 170 Ω sq−1 being reached, while chemical characterization confirms the simultaneous synthesis of the conductive carbon electrode material and metallic copper nanostructures. Using optimized laser synthesis and patterning conditions, LIG/CuNPs‐based working electrodes are fabricated within a three‐electrode planar cell, and their electrochemical performance is assessed against pristine LIG electrodes, demonstrating good electron transfer kinetics appropriate for electrochemical sensing. The sensor's ability to detect glucose through a non‐enzymatic route is optimized, to assure good sensing performance in standard samples and in artificial sweat complex matrix.


  • Top Cited Papers
    Open Access

    Direct Laser Writing: From Materials Synthesis and Conversion to Electronic Device Processing

    by Tomás Pinheiro, Maria Morais, Sara Silvestre, Emanuel Carlos, João Coelho, Henrique V. Almeida, Pedro Barquinha, Elvira Fortunato, Rodrigo Martins

    Direct Laser Writing (DLW) has been increasingly selected as a microfabrication route for efficient, cost‐effective, high‐resolution material synthesis and conversion. Concurrently, lasers participate in the patterning and assembly of functional geometries in several fields of application, of which electronics stand out. In this review, recent advances and strategies based on DLW for electronics microfabrication are surveyed and outlined, based on laser material growth strategies. First, the main DLW parameters influencing material synthesis and transformation mechanisms are summarized, aimed at selective, tailored writing of conductive and semiconducting materials. Additive and transformative DLW processing mechanisms are discussed, to open space to explore several categories of materials directly synthesized or transformed for electronics microfabrication. These include metallic conductors, metal oxides, transition metal chalcogenides and carbides, laser‐induced graphene, and their mixtures. By accessing a wide range of material types, DLW‐based electronic applications are explored, including processing components, energy harvesting and storage, sensing, and bioelectronics. The expanded capability of lasers to participate in multiple fabrication steps at different implementation levels, from material engineering to device processing, indicates their future applicability to next‐generation electronics, where more accessible, green microfabrication approaches integrate lasers as comprehensive tools.


  • Open Access

    Unveiling Human Proteome Signatures of Heart Failure with Preserved Ejection Fraction

    by Maria J. Sebastião, Henrique V. Almeida, Margarida Serra, Nazha Hamdani, Francisca Saraiva, André P. Lourenço, António S. Barros, Francisco Vasques-Nóvoa, Adelino Leite-Moreira, Paula M. Alves, et al.

    Heart failure with preserved ejection fraction (HFpEF) is a highly prevalent but still poorly understood clinical entity. Its current pathophysiological understanding supports a critical role of comorbidities and their chronic effect on cardiac function and structure. Importantly, despite the replication of some HFpEF phenotypic features, to this day, experimental models have failed to bring new effective therapies to the clinical setting. Thus, the direct investigation of HFpEF human myocardial samples may unveil key, and possibly human-specific, pathophysiological mechanisms. This study employed quantitative proteomic analysis by advanced mass spectrometry (SWATH–MS) to investigate signaling pathways and pathophysiological mechanisms in HFpEF. Protein-expression profiles were analyzed in human left ventricular myocardial samples of HFpEF patients and compared with a mixed control group. Functional analysis revealed several proteins that correlate with HFpEF, including those associated with mitochondrial dysfunction, oxidative stress, and inflammation. Despite the known disease heterogeneity, proteomic profiles could indicate a reduced mitochondrial oxidative phosphorylation and fatty-acid oxidation capacity in HFpEF patients with diabetes. The proteomic characterization described in this work provides new insights. Furthermore, it fosters further questions related to HFpEF cellular pathophysiology, paving the way for additional studies focused on developing novel therapies and diagnosis strategies for HFpEF patients.


  • Open Access

    Pulsed Electric Fields for Valorization of Platelets with No Therapeutic Value towards a High Biomedical Potential Product—A Proof of Concept

    by Daniela Salvador, Henrique Almeida, Duarte Rego, Pedro Mendonça, Ana Paula Sousa, Margarida Serra, Luis Redondo

    Nowadays, the standard media used in clinical-scale mesenchymal stem cell (MSC) production to supply hundreds of clinical trials uses animal-derived components as supplements, which raises several health concerns. Consequently, the development of xeno-free media supplements has emerged. In the current study, the effect of pulse electric field (PEF) application to platelet concentrates (PC) with no therapeutic value for producing platelet releasates (PR) able to sustain the ability of bone marrow-MSCs (BM-MSCs) to self-renew and differentiate was tested. It was demonstrated that PEF application to PC induces platelet activation and growth factor (GF) release, namely PDGF, FGF, IGF, and TGF-β. The highest GF release was observed for TGF-β, achieving similar levels to those attained in platelet lysates (PL). BM-MSCs expanded in the presence of PR obtained by the application of PEF (7 pulses of 10 and 12.5 kV/cm) to PC (PR PEF) retained the characteristic MSC cell-surface markers, and the ability to proliferate and differentiate into osteogenic, adipogenic, and chondrogenic lineages. In this study, evidence is provided that PR PEF represents a suitable alternative to fetal bovine serum (FBS) for use in MSC production.