XLXiaogai Li

Xiaogai Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaogai Li has a total of 48 co-authors. Here are the top co-authors by number of shared publications:

  • Svein Kleiven

    Division of Neuronic Engineering, KTH Royal Institute of Technology, Stockholm, Sweden

    15 shared publications
  • Svein Kleiven

    Division of Neuronic Engineering, KTH Royal Institute of Technology, Stockholm, Sweden

    14 shared publications
  • Zhou Zhou

    Division of Neuronic Engineering, KTH Royal Institute of Technology, Stockholm, Sweden

    9 shared publications
  • Hans von Holst

    Department of Neurosurgery, Karolinska University Hospital, 171 76 Stockholm, Sweden

    6 shared publications
  • Zhou Zhou

    Division of Neuronic Engineering, KTH Royal Institute of Technology, Stockholm, Sweden

    4 shared publications
  • Hans von Holst

    Division of Neuronic Engineering, School of Technology and Health (STH), Royal Institute of Technology (KTH), Stockholm, Sweden; Division of Clinical Neuroscience, Section of Neurosurgery, Karolinska Institutet, Stockholm, Sweden

    3 shared publications

Latest Publications

  • Open Access

    Growth charts of sutures and fontanelles for the first year of infancy

    by Siyuan Chen, Svein Kleiven, Ingemar Thiblin, Xiaogai Li

    Understanding the morphological development of infant sutures and fontanelles is essential for evaluating normal cranial growth, detecting developmental anomalies and aiding forensic evaluations. Yet, age-specific quantitative data and standardized growth charts for these structures have not been systematically established. Here, we present comprehensive normative growth charts for cranial sutures and fontanelles and quantify the prevalence and morphology of accessory sutures during the first year of infancy. A total of 194 head computed tomography (CT) scans from the New Mexico Decedent Image Database (NMDID) were analysed using an automated morphometric framework, measuring suture width, length, sinuosity and fontanelle area. Growth trajectories were modelled using Generalized Additive Models for Location, Scale, and Shape (GAMLSS), and suture closure was quantified via the suture closure ratio (SCR). Results show that suture length increases and width decreases with age; the metopic suture closes earliest, where other major cranial sutures remain open throughout the first year. The anterior fontanelle peaks in area around three months before gradually decreasing. Accessory sutures, particularly the mendosal suture and superior median fissure, are prevalent in early infancy but diminish rapidly with age. These results provide a comprehensive morphometric reference for infant cranial sutures and fontanelles, supporting objective clinical assessment and forensic interpretation.


  • Open Access

    Surface-based versus voxel-based finite element head models: comparative analyses of strain responses

    by Zhou Zhou, Xiaogai Li, Svein Kleiven

    Finite element (FE) models of the human head are important injury assessment tools but developing a high-quality, hexahedral-meshed FE head model without compromising geometric accuracy is a challenging task. Important brain features, such as the cortical folds and ventricles, were captured only in a handful of FE head models that were primarily developed from two meshing techniques, i.e., surface-based meshing with conforming elements to capture the interfacial boundaries and voxel-based meshing by converting the segmented voxels into elements with and without mesh smoothing. Despite these advancements, little knowledge existed of how similar the strain responses were between surface- and voxel-based FE head models. This study uniquely addressed this gap by presenting three anatomically detailed models - a surface-based model with conforming meshes to capture the cortical folds-subarachnoid cerebrospinal fluid and brain-ventricle interfaces, and two voxel-based models (with and without mesh smoothing) - derived from the same imaging dataset. All numerical settings in the three models were exactly the same, except for the meshes. These three models were employed to simulate head impacts. The results showed that, when calculating commonly used injury metrics, including the percentile strains below the maximum (e.g., 99 percentile strain) and the volume of brain element with the strain over certain thresholds, the responses of the three models were virtually identical. Different strain patterns existed between the surface- and the voxel-based models at the interfacial boundary (e.g., sulci and gyri in the cortex, regions adjacent to the falx and tentorium) with strain differences exceeding 0.1, but remarkable similarities were noted at the non-interfacial region. The mesh smoothing procedure marginally reduced the strain discrepancies between the voxel- and surface-based model. This study yielded new quantitative insights into the general similarity in the strain responses between the surface- and voxel-based FE head models and underscored that caution should be exercised when using the strain at the interface to predict injury.


  • Open Access

    The White Matter Fiber Tract Deforms Most in the Perpendicular Direction During In Vivo Volunteer Impacts

    by Zhou Zhou, Christoffer Olsson, T. Christian Gasser, Xiaogai Li, Svein Kleiven

    White matter (WM) tract-related strains are increasingly used to quantify brain mechanical responses, but their dynamics in live human brains during in vivo impact conditions remain largely unknown. Existing research primarily looked into the normal strain along the WM fiber tracts (i.e., tract-oriented normal strain), but it is rarely the case that the fiber tract only endures tract-oriented normal strain during impacts. In this study, we aim to extend the in vivo measurement of WM fiber deformation by quantifying the normal strain perpendicular to the fiber tract (i.e., tract-perpendicular normal strain) and the shear strain along and perpendicular to the fiber tract (i.e., tract-oriented shear strain and tract-perpendicular shear strain, respectively). To achieve this, we combine the three-dimensional strain tensor from the tagged magnetic resonance imaging with the diffusion tensor imaging (DTI) from an open-access dataset, including 44 volunteer impacts under two head loading modes, i.e., neck rotations ( N = 30) and neck extensions ( N = 14). The strain tensor is rotated to the coordinate system with one axis aligned with DTI-revealed fiber orientation, and then four tract-related strain measures are calculated. The results show that tract-perpendicular normal strain peaks are the largest among the four strain types ( p < 0.05, Friedman’s test). The distribution of tract-related strains is affected by the head loading mode, of which laterally symmetric patterns with respect to the midsagittal plane are noted under neck extensions, but not under neck rotations. Our study presents a comprehensive in vivo strain quantification toward a multifaceted understanding of WM dynamics. We find that the WM fiber tract deforms most in the perpendicular direction, illuminating new fundamentals of brain mechanics. The reported strain images can be used to evaluate the fidelity of computational head models, especially those intended to predict fiber deformation under noninjurious conditions.


  • Open Access

    Peaks and Distributions of White Matter Tract-related Strains in Bicycle Helmeted Impacts: Implication for Helmet Ranking and Optimization

    by Zhou Zhou, Madelen Fahlstedt, Xiaogai Li, Svein Kleiven

    Traumatic brain injury (TBI) in cyclists is a growing public health problem, with helmets being the major protection gear. Finite element head models have been increasingly used to engineer safer helmets often by mitigating brain strain peaks. However, how different helmets alter the spatial distribution of brain strain remains largely unknown. Besides, existing research primarily used maximum principal strain (MPS) as the injury parameter, while white matter fiber tract-related strains, increasingly recognized as effective predictors for TBI, have rarely been used for helmet evaluation. To address these research gaps, we used an anatomically detailed head model with embedded fiber tracts to simulate fifty-one helmeted impacts, encompassing seventeen bicycle helmets under three impact locations. We assessed the helmet performance based on four tract-related strains characterizing the normal and shear strain oriented along and perpendicular to the fiber tract, as well as the prevalently used MPS. Our results showed that both the helmet model and impact location affected the strain peaks. Interestingly, we noted that different helmets did not alter strain distribution, except for one helmet under one specific impact location. Moreover, our analyses revealed that helmet ranking outcome based on strain peaks was affected by the choice of injury metrics (Kendall’s Tau coefficient: 0.58–0.93). Significant correlations were noted between tract-related strains and angular motion-based injury metrics. This study provided new insights into computational brain biomechanics and highlighted the helmet ranking outcome was dependent on the choice of injury metrics. Our results also hinted that the performance of helmets could be augmented by mitigating the strain peak and optimizing the strain distribution with accounting the selective vulnerability of brain subregions and more research was needed to develop region-specific injury criteria.


  • Open Access

    Infant skull fractures align with the direction of bone mineralization

    by Siyuan Chen, Svein Kleiven, Xiaogai Li

    The geometry and mechanical properties of infant skull bones differ significantly from those of adults. Over the past decades, debates surrounding whether fractures in infants come from deliberate abuse or accidents have generated significant impacts in both legal and societal contexts. However, the etiology of infant skull fractures remains unclear, which motivates this study with two main components of work. Firstly, we present and implement a progressive unidirectional fabric composite damage model for infant cranial vaults to represent ductile and anisotropic properties—two typical mechanical characteristics of infant skulls. Secondly, we hypothesize that these intrinsic material properties cause injuries perpendicular to the fiber direction to dominate infant skull fractures, resulting in fracture lines that align with the direction of mineralization in the infant skull. The material model and the finite element (FE) model were verified hierarchically, and this hypothesis was verified by reconstructing two legal cases with known fall heights and implementing the above damage model into CT-based subject-specific infant FE head models. We discovered that the infant skull is more susceptible to injuries within planes perpendicular to the mineralization direction because of the anisotropic mechanical property caused by the direction of mineralization, leading to infant skull fractures aligning with the mineralization direction. Our findings corroborated the several previously reported observations of fractures on cranial vaults, demonstrating that these fractures were closely associated with sutures and oriented along the mineralization direction, and revealed the underlying mechanisms of infant skull fracture pattern. The modeling methods and results of this study will serve as an anchor point for more rigorous investigations of infant skull fractures, ultimately aiming to provide convincing biomechanical evidence to aid forensic diagnoses of abusive head trauma.


  • Open Access

    Surface-Based vs. Voxel-Based Finite Element Head Models: Comparative Analyses of Strain Responses

    by Zhou Zhou, Xiaogai Li, Svein Kleiven

    Finite element (FE) models of the human head are important injury assessment tools but developing a high-quality, hexahedral-meshed FE head model without compromising geometric accuracy is a challenging task. Important brain features, such as the cortical folds and ventricles, were captured only in a handful of FE head models that were primarily developed from two meshing techniques, i.e., surface-based meshing with conforming elements to capture the interfacial boundaries and voxel-based meshing by converting the segmented voxels into elements with and without mesh smoothing. Despite these advancements, little knowledge existed of how similar the strain responses were between surface- and voxel-based FE head models. This study uniquely addressed this gap by presenting three anatomically detailed models - a surface-based model with conforming meshes to capture the cortical folds-subarachnoid cerebrospinal fluid and brain-ventricle interfaces, and two voxel-based models (with and without mesh smoothing) - derived from the same imaging dataset. All numerical settings in the three models were exactly the same, except for the meshes. These three models were employed to simulate head impacts. The results showed that, when calculating commonly used injury metrics, including the percentile strains below the maximum (e.g., 99 percentile strain) and the volume of brain element with the strain over certain thresholds, the responses of the three models were virtually identical. Different strain patterns existed between the surface- and the voxel-based models at the interfacial boundary (e.g., sulci and gyri in the cortex, regions adjacent to the falx and tentorium) with strain differences exceeding 0.1, but remarkable similarities were noted at the non-interfacial region. The mesh smoothing procedure marginally reduced the strain discrepancies between the voxel- and surface-based model. This study yielded new quantitative insights into the general similarity in the strain responses between the surface- and voxel-based FE head models and underscored that caution should be exercised when using the strain at the interface to predict injury.


  • Open Access

    Peaks and Distributions of White Matter Tract-related Strains in Bicycle Helmeted Impacts: Implication for Helmet Ranking and Optimization

    by Zhou Zhou, Madelen Fahlstedt, Xiaogai Li, Svein Kleiven

    Traumatic brain injury (TBI) in cyclists is a growing public health problem, with helmets being the major protection gear. Finite element head models have been increasingly used to engineer safer helmets often by mitigating brain strain peaks. However, how different helmets alter the spatial distribution of brain strain remains largely unknown. Besides, existing research primarily used maximum principal strain (MPS) as the injury parameter, while white matter fiber tract-related strains, increasingly recognized as effective predictors for TBI, have rarely been used for helmet evaluation. To address these research gaps, we used an anatomically detailed head model with embedded fiber tracts to simulate fifty-one helmeted impacts, encompassing seventeen bicycle helmets under three impact locations. We assessed the helmet performance based on four tract-related strains characterizing the normal and shear strain oriented along and perpendicular to the fiber tract, as well as the prevalently used MPS. Our results showed that both the helmet model and impact location affected the strain peaks. Interestingly, we noted that helmets did not alter strain distribution, except for one helmet under one specific impact location. Moreover, our analyses revealed that helmet ranking outcome based on strain peaks was affected by the choice of injury metrics (Kendall’s tau coefficient: 0.58 ∼ 0.93). Significant correlations were noted between tract-related strains and angular motion-based injury metrics. This study provided new insights into computational brain biomechanics and highlighted the helmet ranking outcome was dependent on the choice of injury metrics. Our results also hinted that the performance of helmets could be augmented by mitigating the strain peak and optimizing the strain distribution with accounting the selective vulnerability of brain subregions, although more research was needed to develop region-specific injury criteria.


  • Open Access

    Subject-specific finite element head models for skull fracture evaluation—a new tool in forensic pathology

    by Mikkel Jon Henningsen, Natalia Lindgren, Svein Kleiven, Xiaogai Li, Christina Jacobsen, Chiara Villa

    Post-mortem computed tomography (PMCT) enables the creation of subject-specific 3D head models suitable for quantitative analysis such as finite element analysis (FEA). FEA of proposed traumatic events is an objective and repeatable numerical method for assessing whether an event could cause a skull fracture such as seen at autopsy. FEA of blunt force skull fracture in adults with subject-specific 3D models in forensic pathology remains uninvestigated. This study aimed to assess the feasibility of FEA for skull fracture analysis in routine forensic pathology. Five cases with blunt force skull fracture and sufficient information on the kinematics of the traumatic event to enable numerical reconstruction were chosen. Subject-specific finite element (FE) head models were constructed by mesh morphing based on PMCT 3D models and A Detailed and Personalizable Head Model with Axons for Injury Prediction (ADAPT) FE model. Morphing was successful in maintaining subject-specific 3D geometry and quality of the FE mesh in all cases. In three cases, the simulated fracture patterns were comparable in location and pattern to the fractures seen at autopsy/PMCT. In one case, the simulated fracture was in the parietal bone whereas the fracture seen at autopsy/PMCT was in the occipital bone. In another case, the simulated fracture was a spider-web fracture in the frontal bone, whereas a much smaller fracture was seen at autopsy/PMCT; however, the fracture in the early time steps of the simulation was comparable to autopsy/PMCT. FEA might be feasible in forensic pathology in cases with a single blunt force impact and well-described event circumstances.


  • Open Access

    Evaluating child helmet protection and testing standards: A study using PIPER child head models aged 1.5, 3, 6, and 18 years

    by Xiaogai Li, Anna von Schantz, Madelen Fahlstedt, Peter Halldin

    The anatomy of children’s heads is unique and distinct from adults, with smaller and softer skulls and unfused fontanels and sutures. Despite this, most current helmet testing standards for children use the same peak linear acceleration threshold as for adults. It is unclear whether this is reasonable and otherwise what thresholds should be. To answer these questions, helmet-protected head responses for different ages are needed which is however lacking today. In this study, we apply continuously scalable PIPER child head models of 1.5, 3, and 6 years old (YO), and an upgraded 18YO to study child helmet protection under extensive linear and oblique impacts. The results of this study reveal an age-dependence trend in both global kinematics and tissue response, with younger children experiencing higher levels of acceleration and velocity, as well as increased skull stress and brain strain. These findings indicate the need for better protection for younger children, suggesting that youth helmets should have a lower linear kinematic threshold, with a preliminary value of 150g for 1.5-year-old helmets. However, the results also show a different trend in rotational kinematics, indicating that the threshold of rotational velocity for a 1.5YO is similar to that for adults. The results also support the current use of small-sized adult headforms for testing child helmets before new child headforms are available.