ELElias Ledesma-Orozco

Elias Ledesma-Orozco

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Elias Ledesma-Orozco has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimization of Woven CFRP Bistable Structures for Energy Absorption Using a Central Composite Design Methodology

    by Elias Ledesma-Orozco, Mauricio Nahun Nahun Gonzalez Guevara, Juan Francisco Francisco Reveles-Arredondo

    This study presents a computational–statistical framework for optimizing the quasi-static energy absorption of bistable carbon fiber-reinforced polymer (CFRP) composite structures. Orthotropic material properties were experimentally characterized and incorporated into progressive-damage finite element simulations to capture snap-through behavior and energy dissipation. A sequential design of experiments, combining a full factorial design and a face-centered central composite design, was used to explore a five-parameter geometric space. A quadratic response surface model was developed, revealing that two-factor interactions account for 57.4% of the explained variability, indicating strong geometric coupling effects. The thickness ratio was identified as the most influential parameter, while the waiting-zone percentage showed negligible contribution. Constrained nonlinear optimization identified an optimal configuration near the boundary of the design domain. Finite element validation confirmed a 32.5% increase in energy absorption relative to the mean design and an 81.1% reduction in force during snap-through. The proposed methodology provides an efficient surrogate-based approach for the design of high-performance bistable energy-absorbing composite structures.

  • Open Access

    An Efficient Finite Element Model to Predict the Mechanical Response of Metallic-Reinforced Pressure Vessels

    by Ana Lucía León Razo, Miguel Ernesto Gutierrez Rivera, Carlos Enrique Valencia Murillo, Elias Rigoberto Ledesma Orozco, Israel Martinez Ramirez

    In the design of pressure vessels for hydrogen storage, the durability and robustness of the designs are tested by using experimental methods, numerical simulations, or both. However, in the initial design phase, it is widely known that using numerical simulation tools reduces the cost of performing experiments; therefore, models that provide accurate and reliable results must be developed. This work presents an axisymmetric finite element model to predict the mechanical response of reinforced wire pressure vessels of type II. The main contribution of the present model is the use of equivalent properties and a minor number of contact elements to simulate the behavior of the wire reinforcement, which reduces the computational effort compared to a model with a solid-based mesh. The accuracy of the proposed model is tested against solid elements with very good agreement and experimental results with reasonable agreement. A parametric study was conducted to test the influence of the number of layers of reinforcement, and it was concluded that there is a limit to increasing the number of layers, which does not increase the vessel’s strength considerably, but it does with its mass.


  • Neural networks modeling of strain energy density and Tsai-Wu index in laminated composites

    by Elías Ledesma-Orozco, Julio C. Galvis-Chacón, Alejandro E. Rodríguez-Sánchez

    In laminated composite materials design, optimization mainly targets the stacking sequence configuration, which is defined by the lamina thickness and fiber orientations within each layer. Recent studies emphasize the increasing role of Machine Learning in promoting innovative composite designs by facilitating the accurate modeling of essential properties such as strength and stiffness. This study introduces two metamodels that utilize feed-forward artificial neural networks, taking laminate thickness and fiber steering angles as input parameters. The output variables, including strain energy density and the Tsai-Wu failure index, enable the prediction of stacking sequence configurations for laminated materials, a capability confirmed in a case study. The results showcase neural network models with the ability to predict these variables, achieving coefficients of determination above 0.90 for testing data. Consequently, this modeling approach has the potential to be a tool for designers, aiding in decision-making processes for the subsequent optimization of stiffness and strength in structural components made of laminated composite materials.


  • Open Access

    Optimización de la configuración de materiales compuestos laminados mediante redes neuronales y templado simulado

    by Julio César Galvis Chacón, Alejandro E. Rodríguez-Sánchez, Elías Rigoberto Ledesma Orozco

    La optimización de materiales compuestos laminados es uno de los principales desafíos en el diseño de componentes o sistemas estructurales debido a la influencia de múltiples parámetros en su desempeño y respuesta mecánica ante la deformación. Esta investigación utiliza un metamodelo basado en redes neuronales artificiales para predecir índices de desempeño, específicamente el índice de falla de Tsai-Wu, a partir de la configuración del laminado de un material compuesto sujeto a cargas considerando espesores y orientaciones de sus fibras. El metamodelo alimenta una función objetivo diseñada para mejorar la configuración de una pieza mediante la optimización de las orientaciones de las fibras. Se combina un algoritmo de templado simulado adaptado para materiales compuestos laminados con redes neuronales, generando un espacio de soluciones que ofrece al diseñador una amplia gama de opciones para abordar el análisis del problema. El método reportado es una alternativa eficiente al método tradicional de análisis de materiales compuestos laminados, agilizando el proceso y ampliando las posibilidades de configuración disponibles para su selección.


  • IDENTIFICATION OF PARAMETERS FOR CHARACTERIZATION AT HIGH-TEMPERATURE OF 38MnVS6 STEEL USED IN HOT FORGING PROCESSES

    by Diego Armando Gomez Marquez, Elias Rigoberto Ledesma Orozco, Ryutaro Hino, Eduardo Aguilera Gomez, Hiroshi Hamasaki

    Finite element reliability is highly sensitive to the input data quality and constitutive equations used. In this article, two constitutive equations for modeling the plastic flow of metals are used. Two equations commonly employed in metal forming finite element analysis were selected, e.g., the Hensel-Spittel and Johnson-Cook. Compression tests were conducted at various temperatures and strain rates to obtain the plastic flow stress curves. These experimental results were used as a target to fit the constitutive equation parameters. The parameter identification procedure was conducted by solving the so-called inverse problem. An objective function gives a value (error) that indicates how well a parameter set makes the equation fits the experimental results. This error value is minimized by applying optimization techniques; in this case, by using a Genetic Algorithm followed by a gradient-based strategy. Two objective functions are used; the first is based on the well-established least square approach, and the second is proposed. The proposed objective function shows a faster performance than the least square. In addition, the proposed objective function also gives the best fit for the Hensel-Spittel equation. The Johnson-Cook equation is fitted using only the proposed function. The Hensel-Spittel equation shows several local minimums, whereas the Johnson-Cook shows a global one. Keywords: Hot forging, Parameter identification, constitutive equations, finite element analysis. La fiabilidad de los elementos finitos es muy sensible a la calidad de los datos de entrada y a las ecuaciones constitutivas utilizadas. En este artículo se utilizan dos ecuaciones constitutivas para modelar el flujo plástico de los metales. Se seleccionaron dos ecuaciones comúnmente empleadas en el análisis de elementos finitos de conformación de metales, por ejemplo, la de Hensel-Spittel y la de Johnson-Cook. Se realizaron ensayos de compresión a distintas temperaturas y velocidades de deformación para obtener las curvas de esfuerzo de flujo plástico. Estos resultados experimentales se utilizaron como objetivo para ajustar los parámetros de la ecuación constitutiva. El procedimiento de identificación de los parámetros se llevó a cabo mediante la resolución del llamado problema inverso. Una función objetivo da un valor (error) que indica lo bien que un conjunto de parámetros hace que la ecuación se ajuste a los resultados experimentales. Este valor de error se minimiza aplicando técnicas de optimización; en este caso, utilizando un Algoritmo Genético seguido de una estrategia basada en el gradiente. Se utilizan dos funciones objetivo; la primera se basa en el enfoque de mínimos cuadrados bien establecido, y la segunda se propone. La función objetivo propuesta muestra un rendimiento más rápido que el de los mínimos cuadrados. Además, la función objetivo propuesta también ofrece el mejor ajuste para la ecuación de Hensel-Spittel. La ecuación de Johnson-Cook se ajusta utilizando únicamente la función propuesta. La ecuación de Hensel-Spittel muestra varios mínimos locales, mientras que la de Johnson-Cook muestra uno global. Palabras clave: Forja en caliente, Identificación de parámetros, ecuaciones constitutivas, análisis de elementos finitos.

  • The use of neural networks and nonlinear finite element models to simulate the temperature-dependent stress response of thermoplastic elastomers

    by Alejandro E Rodríguez-Sánchez, Sergio Ledesma, Agustín Vidal-Lesso, Elías Ledesma-Orozco

    In this study, a methodology that combines artificial neural networks and nonlinear hyperelastic finite element modeling to simulate the temperature-dependent stress response of elastomer solids is presented. The methodology is verified by a discrete model of a tensile test specimen, which is used to generate stress–strain pairs of existent experimental data. The proposed method is also tested with a benchmark problem of a rubber-like cylinder under compression. Three grades of an elastomer used for diverse engineering applications are used throughout the study. On this basis, three neural network architecture with 10 hidden neurons are implemented as constitutive models to reproduce the experimental data of the materials. The validation results show that the proposed methodology can reproduce tensile tests with an error of 5% of less than regarding experimental data for elastomers that present no yielding point. The benchmark problem results were at the range expected for the elastomer materials with no yielding, where it was possible to derive force temperature-dependent responses. These results suggest that the methodology helps the prediction of the material response when only material stress–strain curves at different temperatures exist. Therefore, the presented approach in this contribution helps to simulate the temperature-dependent stress responses of elastomeric solids with no defined yielding point.


  • Numerical analysis of energy absorption in expanded polystyrene foams

    by Alejandro E Rodríguez-Sánchez, Héctor Plascencia-Mora, Elías R Ledesma-Orozco, Eduardo Aguilera-Gómez, Diego A Gómez-Márquez

    The expanded polystyrene foam is widely used as a protective material in engineering applications where energy absorption is critical for the reduction of harmful dynamic loads. However, to design reliable protective components, it is necessary to predict its nonlinear stress response with a good approximation, which makes it possible to know from the engineering design analysis the amount of energy that a product may absorb. In this work, the hyperfoam constitutive material model was used in a finite element model to approximate the mechanical response of an expanded polystyrene foam of three different densities. Additionally, an experimental procedure was performed to obtain the response of the material at three loading rates. The experimental results show that higher densities at high loading rates allow better energy absorption in the expanded polystyrene. As for the energy dissipation, high dissipation is obtained at higher densities at low loading rates. In the numerical results, the proposed finite element model presented a good performance since root mean square error values below 9% were obtained around the experimental compressive stress/strain curves for all tested material densities. Also, the prediction of energy absorption with the proposed model was around a maximum error of 5% regarding the experimental results. Therefore, the prediction of energy absorption and the compressive stress response of expanded polystyrene foams can be studied using the proposed finite element model in combination with the hyperfoam material model.


  • Assessment of the Ground Reaction Forces on Metatarsal Foot Bones Due to Changes on Pinball Region Contact

    by Roberto González-Navarrete, Natali Mancera-Campos, Agustin Vidal-Lesso, Elías Ledesma-Orozco

  • STRUCTURAL EFFECT OF STAGGERED COMPOSITE REINFORCEMENTS WITHIN THE FIREWALL OF AN AIRCRAFT

    by Victor Alfonso Ramirez Elías, Alejandro Esteban Rodriguez Sanchez, Elias Rigoberto Ledesma Orozco, Hilario Hernandez Moreno, Erik Vargas Rojas, Luis Fernando Puente Medellin, Luis David Celaya Garcia

    The performance of composite materials, such as high strength and low density, is ideal for aerospace applications. This paper presents the structural analysis of a component of a utility aircraft, the STELA M1. As this is still a prototype, the aim is to validate the resistance of its fuselage subjected first to static loads.

  • Application of artificial neural networks to map the mechanical response of a thermoplastic elastomer

    by Alejandro E Rodríguez-Sánchez, Elías Ledesma-Orozco, Sergio Ledesma, Agustín Vidal-Lesso