Oscar Romero
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oscar Romero has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Jaime Lloret
Instituto de Investigacion para la Gestion Integrada de Zonas Costeras Universitat Politècnica de València Valencia Spain
7 shared publications - Néstor Thome
Instituto Universitario de Matemática Multidisciplinar Universitat Politècnica de València 46022 Valencia Spain
7 shared publications - Jose Miguel Jimenez
Instituto de Investigación para la Gestión Integrada de Zonas Costeras, Universitat Politecnica de Valencia, Valencia, Spain
4 shared publications - Lorena Parra
Departamento de Producción Agraria, Escuela Técnica Superior de Ingeniería Agronómica, Alimentaria y de Biosistemas, Universidad Politécnica de Madrid, 28040 Madrid, Spain
4 shared publications - Laura García
Department of Information and Communications Technologies, Universidad Politécnica de Cartagena, 30202 Cartagena, Spain
2 shared publications Leila Lebtahi
2 shared publications
Latest Publications
- Open Access
- 16 April 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (8) , 3887
Structured 3D-SVD: A Practical Framework for the Compression and Reconstruction of Biological Volumetric Images
This work introduces Structured 3D-SVD as a practical framework for the reconstruction, compression, and analysis of biological volumetric data. Inspired by the logic of matrix singular value decomposition (SVD), the proposed approach represents third-order volumetric data in the spatial domain and supports progressive reconstruction through ordered quasi-singular coefficients. The experimental evaluation was carried out on two biological volumetric datasets: one full-volume scan of a fish and another of a brain. The results show that Structured 3D-SVD achieves reconstruction quality close to that of Tucker decomposition while requiring shorter computation times and outperforms canonical polyadic decomposition (CPD) in both accuracy and runtime. In addition, a progressive reconstruction analysis shows that relatively low truncation levels are sufficient to preserve the main volumetric structures, while higher truncation levels lead to more detailed reconstructions.
- 16 April 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (8) , 3887
Open AccessStructured 3D-SVD: A Practical Framework for the Compression and Reconstruction of Biological Volumetric Images
This work introduces Structured 3D-SVD as a practical framework for the reconstruction, compression, and analysis of biological volumetric data. Inspired by the logic of matrix singular value decomposition (SVD), the proposed approach represents third-order volumetric data in the spatial domain and supports progressive reconstruction through ordered quasi-singular coefficients. The experimental evaluation was carried out on two biological volumetric datasets: one full-volume scan of a fish and another of a brain. The results show that Structured 3D-SVD achieves reconstruction quality close to that of Tucker decomposition while requiring shorter computation times and outperforms canonical polyadic decomposition (CPD) in both accuracy and runtime. In addition, a progressive reconstruction analysis shows that relatively low truncation levels are sufficient to preserve the main volumetric structures, while higher truncation levels lead to more detailed reconstructions.
- Open Access
Applications of Singular Entropy to Signals and Singular Smoothness to Images
This paper explores signal and image analysis by using the Singular Value Decomposition (SVD) and its extension, the Generalized Singular Value Decomposition (GSVD). A key strength of SVD lies in its ability to separate information into orthogonal subspaces. While SVD is a well-established tool in ECG analysis, particularly for source separation, this work proposes a refined method for selecting a threshold to distinguish between maternal and fetal components more effectively. In the first part of the paper, the focus is onmedical signal analysis,where the concepts of Energy Gap Variation (EGV) and Singular Energy are introduced to isolate fetal and maternal ECG signals, improving the known ones. Furthermore, the approach is significantly enhanced by the application of GSVD, which provides additional discriminative power for more accurate signal separation. The second part introduces a novel technique called Singular Smoothness, developed for image analysis. This method incorporates Singular Entropy and the Frobenius normto evaluate information density, and is applied to the detection of natural anomalies such asmountain fractures and burned forest regions. Numerical experiments are presented to demonstrate the effectiveness of the proposed approaches.
Open AccessApplications of Singular Entropy to Signals and Singular Smoothness to Images
This paper explores signal and image analysis by using the Singular Value Decomposition (SVD) and its extension, the Generalized Singular Value Decomposition (GSVD). A key strength of SVD lies in its ability to separate information into orthogonal subspaces. While SVD is a well-established tool in ECG analysis, particularly for source separation, this work proposes a refined method for selecting a threshold to distinguish between maternal and fetal components more effectively. In the first part of the paper, the focus is onmedical signal analysis,where the concepts of Energy Gap Variation (EGV) and Singular Energy are introduced to isolate fetal and maternal ECG signals, improving the known ones. Furthermore, the approach is significantly enhanced by the application of GSVD, which provides additional discriminative power for more accurate signal separation. The second part introduces a novel technique called Singular Smoothness, developed for image analysis. This method incorporates Singular Entropy and the Frobenius normto evaluate information density, and is applied to the detection of natural anomalies such asmountain fractures and burned forest regions. Numerical experiments are presented to demonstrate the effectiveness of the proposed approaches.
- Open Access
- 30 November 2022
- Published by MDPI AG in Electronics
- Vol. 11 (23) , 3965
Driving Assistance System for Ambulances to Minimise the Vibrations in Patient Cabin
The ambulance service is the main transport for diseased or injured people which suffers the same acceleration forces as regular vehicles. These accelerations, caused by the movement of the vehicle, impact the performance of tasks executed by sanitary personnel, which can affect patient survival or recovery time. In this paper, we have trained, validated, and tested a system to assess driving in ambulance services. The proposed system is composed of a sensor node which measures the vehicle vibrations using an accelerometer. It also includes a GPS sensor, a battery, a display, and a speaker. When two possible routes reach the same destination point, the system compares the two routes based on previously classified data and calculates an index and a score. Thus, the index balances the possible routes in terms of time to reach the destination and the vibrations suffered in the patient cabin to recommend the route that minimises those vibrations. Three datasets are used to train, validate, and test the system. Based on an Artificial Neural network (ANN), the classification model is trained with tagged data classified as low, medium, and high vibrations, and 97% accuracy is achieved. Then, the obtained model is validated using data from three routes of another region. Finally, the system is tested in two new scenarios with two possible routes to reach the destination. The results indicate that the route with less vibration is preferred when there are low time differences (less than 6%) between the two possible routes. Nonetheless, with the current weighting factors, the shortest route is preferred when time differences between routes are higher than 20%, regardless of the higher vibrations in the shortest route.
- 30 November 2022
- Published by MDPI AG in Electronics
- Vol. 11 (23) , 3965
Open AccessDriving Assistance System for Ambulances to Minimise the Vibrations in Patient Cabin
The ambulance service is the main transport for diseased or injured people which suffers the same acceleration forces as regular vehicles. These accelerations, caused by the movement of the vehicle, impact the performance of tasks executed by sanitary personnel, which can affect patient survival or recovery time. In this paper, we have trained, validated, and tested a system to assess driving in ambulance services. The proposed system is composed of a sensor node which measures the vehicle vibrations using an accelerometer. It also includes a GPS sensor, a battery, a display, and a speaker. When two possible routes reach the same destination point, the system compares the two routes based on previously classified data and calculates an index and a score. Thus, the index balances the possible routes in terms of time to reach the destination and the vibrations suffered in the patient cabin to recommend the route that minimises those vibrations. Three datasets are used to train, validate, and test the system. Based on an Artificial Neural network (ANN), the classification model is trained with tagged data classified as low, medium, and high vibrations, and 97% accuracy is achieved. Then, the obtained model is validated using data from three routes of another region. Finally, the system is tested in two new scenarios with two possible routes to reach the destination. The results indicate that the route with less vibration is preferred when there are low time differences (less than 6%) between the two possible routes. Nonetheless, with the current weighting factors, the shortest route is preferred when time differences between routes are higher than 20%, regardless of the higher vibrations in the shortest route.
- Open Access
- 27 November 2022
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 11 (12) , 597
Low-Cost System for Automatic Recognition of Driving Pattern in Assessing Interurban Mobility using Geo-Information
Mobility in urban and interurban areas, mainly by cars, is a day-to-day activity of many people. However, some of its main drawbacks are traffic jams and accidents. Newly made vehicles have pre-installed driving evaluation systems, which can prevent accidents. However, most cars on our roads do not have driver assessment systems. In this paper, we propose an approach for recognising driving styles and enabling drivers to reach safer and more efficient driving. The system consists of two physical sensors connected to a device node with a display and a speaker. An artificial neural network (ANN) is included in the node, which analyses the data from the sensors, and then recognises the driving style. When an abnormal driving pattern is detected, the speaker will play a warning message. The prototype was assembled and tested using an interurban road, in particular on a conventional road with three driving styles. The gathered data were used to train and validate the ANN. Results, in terms of accuracy, indicate that better accuracy is obtained when the velocity, position (latitude and longitude), time, and turning speed for the 3-axis are used, offering an average accuracy of 83%. If the classification is performed considering just two driving styles, normal and aggressive, then the accuracy reaches 92%. When the geo-information and time data are included, the main novelty of this paper, the classification accuracy is improved by 13%.
- 27 November 2022
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 11 (12) , 597
Open AccessLow-Cost System for Automatic Recognition of Driving Pattern in Assessing Interurban Mobility using Geo-Information
Mobility in urban and interurban areas, mainly by cars, is a day-to-day activity of many people. However, some of its main drawbacks are traffic jams and accidents. Newly made vehicles have pre-installed driving evaluation systems, which can prevent accidents. However, most cars on our roads do not have driver assessment systems. In this paper, we propose an approach for recognising driving styles and enabling drivers to reach safer and more efficient driving. The system consists of two physical sensors connected to a device node with a display and a speaker. An artificial neural network (ANN) is included in the node, which analyses the data from the sensors, and then recognises the driving style. When an abnormal driving pattern is detected, the speaker will play a warning message. The prototype was assembled and tested using an interurban road, in particular on a conventional road with three driving styles. The gathered data were used to train and validate the ANN. Results, in terms of accuracy, indicate that better accuracy is obtained when the velocity, position (latitude and longitude), time, and turning speed for the 3-axis are used, offering an average accuracy of 83%. If the classification is performed considering just two driving styles, normal and aggressive, then the accuracy reaches 92%. When the geo-information and time data are included, the main novelty of this paper, the classification accuracy is improved by 13%.
- Open Access
- 5 October 2020
- Published by Wiley in Wireless Communications and Mobile Computing
- Vol. 2020, 1-22
Architecture and Protocol to Optimize Videoconference in Wireless Networks
In the past years, videoconferencing (VC) has become an essential means of communications. VC allows people to communicate face to face regardless of their location, and it can be used for different purposes such as business meetings, medical assistance, commercial meetings, and military operations. There are a lot of factors in real-time video transmission that can affect to the quality of service (QoS) and the quality of experience (QoE). The application that is used (Adobe Connect, Cisco Webex, and Skype), the internet connection, or the network used for the communication can affect to the QoE. Users want communication to be as good as possible in terms of QoE. In this paper, we propose an architecture for videoconferencing that provides better quality of experience than other existing applications such as Adobe Connect, Cisco Webex, and Skype. We will test how these three applications work in terms of bandwidth, packets per second, and delay using WiFi and 3G/4G connections. Finally, these applications are compared to our prototype in the same scenarios as they were tested, and also in an SDN, in order to improve the advantages of the prototype.
- 5 October 2020
- Published by Wiley in Wireless Communications and Mobile Computing
- Vol. 2020, 1-22
Open AccessArchitecture and Protocol to Optimize Videoconference in Wireless Networks
In the past years, videoconferencing (VC) has become an essential means of communications. VC allows people to communicate face to face regardless of their location, and it can be used for different purposes such as business meetings, medical assistance, commercial meetings, and military operations. There are a lot of factors in real-time video transmission that can affect to the quality of service (QoS) and the quality of experience (QoE). The application that is used (Adobe Connect, Cisco Webex, and Skype), the internet connection, or the network used for the communication can affect to the QoE. Users want communication to be as good as possible in terms of QoE. In this paper, we propose an architecture for videoconferencing that provides better quality of experience than other existing applications such as Adobe Connect, Cisco Webex, and Skype. We will test how these three applications work in terms of bandwidth, packets per second, and delay using WiFi and 3G/4G connections. Finally, these applications are compared to our prototype in the same scenarios as they were tested, and also in an SDN, in order to improve the advantages of the prototype.
- 24 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 33 (1) , 106-112
MHCP: Multimedia Hybrid Cloud Computing Protocol and Architecture for Mobile Devices
Multimedia cloud computing has appeared as a very attractive environment for the business world in terms of providing cost-effective services with a minimum of entry costs and infrastructure requirements. There are some architecture proposals in the related literature, but there is no multimedia cloud computing architecture with hybrid features specifically designed for mobile devices. In this article, we propose a new multimedia hybrid cloud computing architecture and protocol. It merges existing private and public clouds and combines IaaS, SaaS and SECaaS cloud computing models in order to find a common platform to deliver real time traffic from heterogeneous multimedia and social networks for mobile users. The developed protocol provides suitable levels of QoS, while providing a secure and trusted cloud environment.
- 24 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 33 (1) , 106-112
MHCP: Multimedia Hybrid Cloud Computing Protocol and Architecture for Mobile Devices
Multimedia cloud computing has appeared as a very attractive environment for the business world in terms of providing cost-effective services with a minimum of entry costs and infrastructure requirements. There are some architecture proposals in the related literature, but there is no multimedia cloud computing architecture with hybrid features specifically designed for mobile devices. In this article, we propose a new multimedia hybrid cloud computing architecture and protocol. It merges existing private and public clouds and combines IaaS, SaaS and SECaaS cloud computing models in order to find a common platform to deliver real time traffic from heterogeneous multimedia and social networks for mobile users. The developed protocol provides suitable levels of QoS, while providing a secure and trusted cloud environment.
- 17 May 2018
- Published by Springer Nature in Numerical Algorithms
- Vol. 80 (4) , 1309-1328
Further results on generalized centro-invertible matrices
- 17 May 2018
- Published by Springer Nature in Numerical Algorithms
- Vol. 80 (4) , 1309-1328
Further results on generalized centro-invertible matrices
- 13 December 2017
- Published by Springer Nature in The Journal of Supercomputing
- Vol. 75 (4) , 1869-1893
System for monitoring the wellness state of people in domestic environments employing emoticon-based HCI
- 13 December 2017
- Published by Springer Nature in The Journal of Supercomputing
- Vol. 75 (4) , 1869-1893
System for monitoring the wellness state of people in domestic environments employing emoticon-based HCI
- 1 January 2017
- Published by Elsevier in Journal of Computational and Applied Mathematics
- Vol. 309, 333-341
Algorithms for solving the inverse problem associated with- 1 January 2017
- Published by Elsevier in Journal of Computational and Applied Mathematics
- Vol. 309, 333-341
Algorithms for solving the inverse problem associated with