Pawel M. Lewinski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Pawel M. Lewinski has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Przemysław Więch
Building Research Institute (ITB), Filtrowa 1, 00-611 Warsaw, Poland
5 shared publications - Sławomir Dudziak
Faculty of Civil Engineering, Warsaw University of Technology, Armii Ludowej Ave. 16, 00-637 Warsaw, Poland
4 shared publications - Zbigniew Fedorczyk
Building Research Institute (ITB), Filtrowa 1, 00-611 Warsaw, Poland
4 shared publications - Łukasz Zacharski
Building Research Institute (ITB), Filtrowa 1, 00-611 Warsaw, Poland
3 shared publications W. Wojewódzki
Prof., Dept. of Civ. Engrg., Warsaw Univ. of Tech., Warsaw, Poland, Al. Armii Ludowej 16
2 shared publicationsJerzy Derysz
1 shared publication
Latest Publications
- Open Access
Rheological Features and Hereditary Models of Lightweight Sintered Aggregate Concrete Under Cyclic Loading
This article compares the analytical results from two models, based on the theory of hereditary creep strain, with experimental results on the rheological properties of lightweight sintered aggregate concrete under cyclically varying loads. In a previous article, the authors analyzed the adequacy of standard models for the same test results. Because the use of standard models is very complex and does not improve the approximation of test results without additional calibration, the authors suggest reconsidering the use of hereditary models for LWAC. The application of four such long-term models was analyzed. Among these models, the Arutiunian theory of hereditary creep with aging and the modified hereditary theory with Bažant aging function yielded quantitatively and qualitatively correct results. The application of hereditary creep theory allowed for the formulation of the total strain as a superposition of strain increments, obtained by an integral equation. This equation was applied to a series of constant stress increments and decrements, as in the case of cyclic loading, and it was mathematically described in segmented form. Knowledge of the properties of LWAC and useful long-term models is essential for the design of prestressed structures made of lightweight aggregate concrete subjected to time-varying loads.
Open AccessRheological Features and Hereditary Models of Lightweight Sintered Aggregate Concrete Under Cyclic Loading
This article compares the analytical results from two models, based on the theory of hereditary creep strain, with experimental results on the rheological properties of lightweight sintered aggregate concrete under cyclically varying loads. In a previous article, the authors analyzed the adequacy of standard models for the same test results. Because the use of standard models is very complex and does not improve the approximation of test results without additional calibration, the authors suggest reconsidering the use of hereditary models for LWAC. The application of four such long-term models was analyzed. Among these models, the Arutiunian theory of hereditary creep with aging and the modified hereditary theory with Bažant aging function yielded quantitatively and qualitatively correct results. The application of hereditary creep theory allowed for the formulation of the total strain as a superposition of strain increments, obtained by an integral equation. This equation was applied to a series of constant stress increments and decrements, as in the case of cyclic loading, and it was mathematically described in segmented form. Knowledge of the properties of LWAC and useful long-term models is essential for the design of prestressed structures made of lightweight aggregate concrete subjected to time-varying loads.
- Open Access
Adequacy of Standard Models for Long-Term Behavior of Lightweight Concrete with Sintered Aggregate Under Cyclic Loading
This paper presents an experimental determination of the long-term mechanical properties of lightweight concrete with sintered aggregate under cyclic loading and the corresponding analytical standard models. The research was designed around two concrete mixtures. Multiple tests were conducted at the Building Structures, Geotechnics and Concrete Laboratory of the Building Research Institute (ITB), using various equipment including creep-testing machines and tensometric measurements of sample deformations. As a result of these tests, in addition to strength properties, the following time-dependent parameters were determined: the secant modulus of elasticity, shrinkage strains, and creep-recovery strains under cyclic loading. For the parameterization and modeling of constitutive equations, an analysis of creep strains under cyclic loads was carried out, taking into account the integral hereditary law according to the Boltzmann superposition principle and the long-term models formulated according to the following standards and pre-standards: Eurocode 2 (2004), Model Code 2010, Model Code 2020, and Eurocode 2 (2023). The results from the individual models were compared with the test results using the rules for evaluating correction factors for models determined according to Eurocode 2 (2023). It was concluded that the development of creep strain is correctly modeled by the aforementioned standard methods, albeit with the aforementioned correction factors. One of the research objectives was to determine whether the ratchetting phenomenon could be observed during creep of the tested concrete under cyclic loading; however, due to the very low level of plastic deformation, this phenomenon was not detected. The research confirmed the suitability of lightweight concrete with sintered aggregate for use in cyclically loaded concrete structures.
Open AccessAdequacy of Standard Models for Long-Term Behavior of Lightweight Concrete with Sintered Aggregate Under Cyclic Loading
This paper presents an experimental determination of the long-term mechanical properties of lightweight concrete with sintered aggregate under cyclic loading and the corresponding analytical standard models. The research was designed around two concrete mixtures. Multiple tests were conducted at the Building Structures, Geotechnics and Concrete Laboratory of the Building Research Institute (ITB), using various equipment including creep-testing machines and tensometric measurements of sample deformations. As a result of these tests, in addition to strength properties, the following time-dependent parameters were determined: the secant modulus of elasticity, shrinkage strains, and creep-recovery strains under cyclic loading. For the parameterization and modeling of constitutive equations, an analysis of creep strains under cyclic loads was carried out, taking into account the integral hereditary law according to the Boltzmann superposition principle and the long-term models formulated according to the following standards and pre-standards: Eurocode 2 (2004), Model Code 2010, Model Code 2020, and Eurocode 2 (2023). The results from the individual models were compared with the test results using the rules for evaluating correction factors for models determined according to Eurocode 2 (2023). It was concluded that the development of creep strain is correctly modeled by the aforementioned standard methods, albeit with the aforementioned correction factors. One of the research objectives was to determine whether the ratchetting phenomenon could be observed during creep of the tested concrete under cyclic loading; however, due to the very low level of plastic deformation, this phenomenon was not detected. The research confirmed the suitability of lightweight concrete with sintered aggregate for use in cyclically loaded concrete structures.
- Open Access
Short-Term and Long-Term Mechanical Properties of Lightweight Concrete with Sintered Aggregate
The aim of this work is to determine the short-term and long-term mechanical properties of lightweight concrete with relatively new sintered aggregate, as knowledge of these parameters is essential to the design of prestressed structures. The problem can be placed in a broader ecological context, because the aggregate comes from recycled power plant ash. This research study was planned based on two concrete mixtures that were already used in previous publications, as the aim of this work was to conduct comparative research by using other methods. In particular, the aim was to investigate the long-term properties of lightweight concrete by using standard methods and appropriate equipment, such as creep-testing machines. As a result of these studies, the secant modulus of elasticity, cylindrical strength, cubic strength, axial tensile strength, splitting tensile strength, bending strength, and shrinkage and creep strain were determined. This study confirmed the short-term properties of concrete obtained in previous studies but did not confirm the results regarding shrinkage and creep. These results turned out to be much higher, which means that these values should not be tested by non-standard methods. An unusual process of development of the elastic modulus and axial tensile strength was observed, and the reasons for these phenomena were described.
Open AccessShort-Term and Long-Term Mechanical Properties of Lightweight Concrete with Sintered Aggregate
The aim of this work is to determine the short-term and long-term mechanical properties of lightweight concrete with relatively new sintered aggregate, as knowledge of these parameters is essential to the design of prestressed structures. The problem can be placed in a broader ecological context, because the aggregate comes from recycled power plant ash. This research study was planned based on two concrete mixtures that were already used in previous publications, as the aim of this work was to conduct comparative research by using other methods. In particular, the aim was to investigate the long-term properties of lightweight concrete by using standard methods and appropriate equipment, such as creep-testing machines. As a result of these studies, the secant modulus of elasticity, cylindrical strength, cubic strength, axial tensile strength, splitting tensile strength, bending strength, and shrinkage and creep strain were determined. This study confirmed the short-term properties of concrete obtained in previous studies but did not confirm the results regarding shrinkage and creep. These results turned out to be much higher, which means that these values should not be tested by non-standard methods. An unusual process of development of the elastic modulus and axial tensile strength was observed, and the reasons for these phenomena were described.
- Open Access
- 25 April 2025
- Published by MDPI AG in Preprints.org
Short-Term and Rheological Properties of Lightweight Concrete with Sintered Aggregate
The aim of this paper is to determine the short-term and long-term mechanical properties of lightweight concrete with sintered aggregate. The ecological aggregate comes from recycling ashes from power plants, which yield granules after processing. The research was planned based on two concrete mixes. A series of strength and rheological tests was carried out in the Building Structures, Geotechnics and Concrete Laboratory of the Building Research Institute (ITB). As a result of these tests, the following parameters were determined: secant modulus of elasticity and cylindrical strength of concrete, cubic strength of concrete, axial tensile strength, tensile strength at splitting, flexural strength and concrete strains due to creep and shrinkage. An unusual process of development of the modulus of elasticity was observed. Despite this, floor slabs designed from the discussed concrete show slight deflections compared to slabs made of plain concrete. It turns out that the current standard models correctly approximate the results of rheological tests in the case under consideration. Knowledge of the tested parameters is necessary when designing prestressed structures and adopting proven values for static calculations when designing complex structures, including prestressed elements made of discussed lightweight concrete with sintered aggregate.
- 25 April 2025
- Published by MDPI AG in Preprints.org
Open AccessShort-Term and Rheological Properties of Lightweight Concrete with Sintered Aggregate
The aim of this paper is to determine the short-term and long-term mechanical properties of lightweight concrete with sintered aggregate. The ecological aggregate comes from recycling ashes from power plants, which yield granules after processing. The research was planned based on two concrete mixes. A series of strength and rheological tests was carried out in the Building Structures, Geotechnics and Concrete Laboratory of the Building Research Institute (ITB). As a result of these tests, the following parameters were determined: secant modulus of elasticity and cylindrical strength of concrete, cubic strength of concrete, axial tensile strength, tensile strength at splitting, flexural strength and concrete strains due to creep and shrinkage. An unusual process of development of the modulus of elasticity was observed. Despite this, floor slabs designed from the discussed concrete show slight deflections compared to slabs made of plain concrete. It turns out that the current standard models correctly approximate the results of rheological tests in the case under consideration. Knowledge of the tested parameters is necessary when designing prestressed structures and adopting proven values for static calculations when designing complex structures, including prestressed elements made of discussed lightweight concrete with sintered aggregate.
- Open Access
A Detailed Numerical Model for a New Composite Slim-Floor Slab System
The paper concerns the numerical modelling of a new slim-floor system with innovative steel–concrete composite beams called “hybrid beams”. Hybrid beams consist of a high-strength TT inverted cross-section steel profile and a concrete core made of high-performance concrete and are jointed with prestressed hollow core slabs by infill concrete and tie reinforcement. Such systems are gaining popularity since they allow the integration of the main structural members within the ceiling depth, shorten the execution time, and reduce the use of concrete and steel. A three-dimensional finite element model is proposed with all parts of the system taken into account and detailed geometry reproduction. Advanced constitutive models are adopted for steel and concrete. Special attention is paid to the proper characterisation of interfaces. The new approach to calibration of damaged elastic traction–separation constitutive model for cohesive elements is applied to concrete-to-concrete contact zones. The model is validated with outcomes of experimental field tests and analytical calculations. A satisfactory agreement between different assessment methods is obtained. The model can be used in the development phase of a new construction system, for instance, to plan further experimental campaigns or to calibrate simplified design formulas.
Open AccessA Detailed Numerical Model for a New Composite Slim-Floor Slab System
The paper concerns the numerical modelling of a new slim-floor system with innovative steel–concrete composite beams called “hybrid beams”. Hybrid beams consist of a high-strength TT inverted cross-section steel profile and a concrete core made of high-performance concrete and are jointed with prestressed hollow core slabs by infill concrete and tie reinforcement. Such systems are gaining popularity since they allow the integration of the main structural members within the ceiling depth, shorten the execution time, and reduce the use of concrete and steel. A three-dimensional finite element model is proposed with all parts of the system taken into account and detailed geometry reproduction. Advanced constitutive models are adopted for steel and concrete. Special attention is paid to the proper characterisation of interfaces. The new approach to calibration of damaged elastic traction–separation constitutive model for cohesive elements is applied to concrete-to-concrete contact zones. The model is validated with outcomes of experimental field tests and analytical calculations. A satisfactory agreement between different assessment methods is obtained. The model can be used in the development phase of a new construction system, for instance, to plan further experimental campaigns or to calibrate simplified design formulas.
- Open Access
- 26 January 2021
- Published by Polish Academy of Sciences Chancellery in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
- Vol. 69 (1) , 136039
Accuracy assessment of linear elasticity solution for interaction of cylindrical tank with subsoil
The subject of this paper is an assessment of the accuracy of a solution based on the linear theory of elasticity describing the interaction of a cylindrical reinforced concrete tank with the subsoil. The subsoil was modeled in the form of an elastic half-space and Winkler springs. The behavior of the shell structure of the RC cylindrical tank, and particularly of the ground slab interacting with the subsoil, depends largely on the distribution of the reactions on the foundation surface. An analysis of this structure with the shell fixed in a circular ground slab was carried out taking into consideration the elastic half-space model using the Gorbunov-Posadov approach and, for comparison, the two-parameter Winkler model. Although the results for both subsoil models proved to be divergent, the conclusions that follow the accuracy assessment of a solution based on the theory of elasticity are fairly important for engineering practice.
- 26 January 2021
- Published by Polish Academy of Sciences Chancellery in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
- Vol. 69 (1) , 136039
Open AccessAccuracy assessment of linear elasticity solution for interaction of cylindrical tank with subsoil
The subject of this paper is an assessment of the accuracy of a solution based on the linear theory of elasticity describing the interaction of a cylindrical reinforced concrete tank with the subsoil. The subsoil was modeled in the form of an elastic half-space and Winkler springs. The behavior of the shell structure of the RC cylindrical tank, and particularly of the ground slab interacting with the subsoil, depends largely on the distribution of the reactions on the foundation surface. An analysis of this structure with the shell fixed in a circular ground slab was carried out taking into consideration the elastic half-space model using the Gorbunov-Posadov approach and, for comparison, the two-parameter Winkler model. Although the results for both subsoil models proved to be divergent, the conclusions that follow the accuracy assessment of a solution based on the theory of elasticity are fairly important for engineering practice.
- 22 May 2020
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2239 (1) , 020026
Application of contact and reinforced concrete models in the analysis of elements with double studs for movement joints
Double studs were designed to provide high capacity for transferring shear loads and the ability to compensate displacement in the slabs plane. Three sets of RC slabs, jointed by double studs for three different widths of the expansion joint (20, 40 and 60 mm) were tested in the ITB Strength Tests Laboratory. The results of the strength tests were used to validate a 3D model prepared with the ANSYS software. An elastoplastic model with associated flow rule and yield surface consisting of two intersecting conical surfaces was assumed for the concrete. The implemented contact definition between the dowel and sleeve of the stud was of a surface-to-surface type according to the isotropic Coulomb friction law. The computational prediction of the non-linear behaviour of the test models, including the different modes of shear failure depending on the width of the expansion joints, was obtained in accordance with the experimental data.
- 22 May 2020
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2239 (1) , 020026
Application of contact and reinforced concrete models in the analysis of elements with double studs for movement joints
Double studs were designed to provide high capacity for transferring shear loads and the ability to compensate displacement in the slabs plane. Three sets of RC slabs, jointed by double studs for three different widths of the expansion joint (20, 40 and 60 mm) were tested in the ITB Strength Tests Laboratory. The results of the strength tests were used to validate a 3D model prepared with the ANSYS software. An elastoplastic model with associated flow rule and yield surface consisting of two intersecting conical surfaces was assumed for the concrete. The implemented contact definition between the dowel and sleeve of the stud was of a surface-to-surface type according to the isotropic Coulomb friction law. The computational prediction of the non-linear behaviour of the test models, including the different modes of shear failure depending on the width of the expansion joints, was obtained in accordance with the experimental data.
- Open Access
- 13 March 2020
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 20 (2) , 1-16
Finite element model and test results for punching shear failure of RC slabs
The nonlinear finite element analysis of pin-supported reinforced concrete slabs of moderate thickness is the main subject of this paper. This is an important issue of the mechanics of concrete structures. Thus, a nonlinear FE analysis of RC slab models subjected to punching shear was initiated and the comparison of the numerical and test results was made. The prediction engine of the crack pattern due to bending and extension is incorporated in the Mindlin-type (moderately thick) slab model together with other nonlinear features. This is in order to formulate an alternative model of RC slab in relation to the layered models or fully three-dimensional models. New formulas were applied for 3D constitutive relationships for concrete and for tension stiffening effect. Prediction of punching shear was facilitated by Podgórski’s failure criterion for concrete. On the one hand, a considerable advantage of the proposed approach is a relatively low numerical effort in comparison with the existing models, while on the other hand the applied model clearly describes the physical behaviour of a real slab. A supporting test programme for validation was run. Three RC slabs with a system of double-headed studs as the reinforcement against punching were tested by the authors in ITB Strength Tests Laboratory. The results for the units constructed as square slabs with a central short column subjected to full-scale tests were initially compared with assessments based on standard provisions and technical approvals. As a result of this approach, the overall prediction of the nonlinear behaviour of the test model, including the model of shear failure, is in accordance with the experimental data.
- 13 March 2020
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 20 (2) , 1-16
Open AccessFinite element model and test results for punching shear failure of RC slabs
The nonlinear finite element analysis of pin-supported reinforced concrete slabs of moderate thickness is the main subject of this paper. This is an important issue of the mechanics of concrete structures. Thus, a nonlinear FE analysis of RC slab models subjected to punching shear was initiated and the comparison of the numerical and test results was made. The prediction engine of the crack pattern due to bending and extension is incorporated in the Mindlin-type (moderately thick) slab model together with other nonlinear features. This is in order to formulate an alternative model of RC slab in relation to the layered models or fully three-dimensional models. New formulas were applied for 3D constitutive relationships for concrete and for tension stiffening effect. Prediction of punching shear was facilitated by Podgórski’s failure criterion for concrete. On the one hand, a considerable advantage of the proposed approach is a relatively low numerical effort in comparison with the existing models, while on the other hand the applied model clearly describes the physical behaviour of a real slab. A supporting test programme for validation was run. Three RC slabs with a system of double-headed studs as the reinforcement against punching were tested by the authors in ITB Strength Tests Laboratory. The results for the units constructed as square slabs with a central short column subjected to full-scale tests were initially compared with assessments based on standard provisions and technical approvals. As a result of this approach, the overall prediction of the nonlinear behaviour of the test model, including the model of shear failure, is in accordance with the experimental data.
- Open Access
- 1 November 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 661 (1) , 012044
Soil – Structure Interaction of Cylindrical Tank of Variable Wall Thickness under the Thermal Gradient Conditions
The paper presents an effective method for the analysis of soil-structure interaction including the behaviour of cylindrical storage tank with varying wall thickness under the thermal gradient conditions. Elastic half-space and the Winkler model have been used for the description of subsoil. The soil-structure interaction is described by using the power series. A computational example of reinforced concrete tank loaded with temperature difference across the wall thickness is given. The analysis of a hydrostatically loaded cylindrical tank, performed for the model, incorporating elastic half-space shows decrease of radial displacements, as well as substantial changes in the distribution of bending moments compared to the Winkler foundation. A local increase of subsoil reaction around the slab circumference is observed for the case of elastic half-space, contrary to the Winkler model. In the case of a tank loaded with the thermal gradient, however, the solutions for both subsoil models do not differ significantly.
- 1 November 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 661 (1) , 012044
Open AccessSoil – Structure Interaction of Cylindrical Tank of Variable Wall Thickness under the Thermal Gradient Conditions
The paper presents an effective method for the analysis of soil-structure interaction including the behaviour of cylindrical storage tank with varying wall thickness under the thermal gradient conditions. Elastic half-space and the Winkler model have been used for the description of subsoil. The soil-structure interaction is described by using the power series. A computational example of reinforced concrete tank loaded with temperature difference across the wall thickness is given. The analysis of a hydrostatically loaded cylindrical tank, performed for the model, incorporating elastic half-space shows decrease of radial displacements, as well as substantial changes in the distribution of bending moments compared to the Winkler foundation. A local increase of subsoil reaction around the slab circumference is observed for the case of elastic half-space, contrary to the Winkler model. In the case of a tank loaded with the thermal gradient, however, the solutions for both subsoil models do not differ significantly.
- 5 April 2019
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in MATERIAŁY BUDOWLANE
- Vol. 1 (4) , 37-38
Nowy system stropów zespolonych typu slim floor
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informuj?ce swoich czytelnik?w o najnowszych osi?gni?ciach naukowych i nowoczesnych rozwi?zaniach technicznych w Polsce i na ?wiecie, popularyzuje problemy techniczne oraz poszerza wiedz? i kultur? techniczn?.
- 5 April 2019
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in MATERIAŁY BUDOWLANE
- Vol. 1 (4) , 37-38
Nowy system stropów zespolonych typu slim floor
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informuj?ce swoich czytelnik?w o najnowszych osi?gni?ciach naukowych i nowoczesnych rozwi?zaniach technicznych w Polsce i na ?wiecie, popularyzuje problemy techniczne oraz poszerza wiedz? i kultur? techniczn?.