Balasubramanian Ramesh
Research Subjects
Balasubramanian Ramesh has a total of 122 co-authors. Here are the top co-authors by number of shared publications:
- Ammar Hamed Elsheikh
Department of Production Engineering and Mechanical Design, Tanta University, Tanta 31527, Egypt
9 shared publications - Anish Kumar
Indira Gandhi Centre for Atomic Research
4 shared publications P. Sivamurugan
Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Avadi, Chennai, India
3 shared publications- S. A. Muhammed Abraar
Department of Mechanical Engineering, St. Joseph’s Institute of Technology, Chennai 600119, Tamil Nadu, India
3 shared publications A. Elayaperumal
Anna Univ, Coll Engn Guindy, Dept Mech Engn, Madras 600025, Tamil Nadu, India
2 shared publications- Ayyasamy Elaya Perumal
Department of Mechanical Engineering, College of Engineering, Guindy, Anna University, Chennai, India
2 shared publications
Latest Publications
- Open Access
RETRACTED: Ramesh et al. Microstructure, Mechanical Characteristics, and Wear Performance of Spark Plasma Sintered TiB2–Si3N4 as Affected by B4N Doping. Materials 2022, 15, 7096
The journal retracts the article titled, “Microstructure, Mechanical Characteristics, and Wear Performance of Spark Plasma Sintered TiB2–Si3N4 as Affected by B4N Doping”
Open AccessRETRACTED: Ramesh et al. Microstructure, Mechanical Characteristics, and Wear Performance of Spark Plasma Sintered TiB2–Si3N4 as Affected by B4N Doping. Materials 2022, 15, 7096
The journal retracts the article titled, “Microstructure, Mechanical Characteristics, and Wear Performance of Spark Plasma Sintered TiB2–Si3N4 as Affected by B4N Doping”
- 10 December 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (2) , 66
Optimization and assessment of self-healing thick E-glass fiber reinforced epoxy composites using microencapsulated healing agents
- 10 December 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (2) , 66
Optimization and assessment of self-healing thick E-glass fiber reinforced epoxy composites using microencapsulated healing agents
- 10 September 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (13) , 13686-13696
Examination of Minimum Quantity Lubrication Performance in the Hard Turning of AISI/SAE 1060 High-Carbon Steel
- 10 September 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (13) , 13686-13696
Examination of Minimum Quantity Lubrication Performance in the Hard Turning of AISI/SAE 1060 High-Carbon Steel
- 30 June 2024
- Published by IGI Global Scientific Publishing
- p. 49-66
Machine Learning in Industrial IoT Applications for Safety, Security, Asset Localization, Quality Assurance, and Sustainability in Smart Production
This study explores the integration of machine learning techniques, notably Support Vector Machines (SVM) and Convolutional Neural Networks (CNN), with industrial production processes for quality assurance. The emphasis is on examining the performance of SVM and CNN through a rigorous assessment of precision, recall, and F1 score in the Performance Metrics Evaluation. Additionally, the study tests the algorithms against existing baseline approaches, evaluating their accuracy and efficiency in fault identification. The results reveal the consistent and strong performance of SVM and CNN, highlighting their revolutionary potential in revolutionizing quality control systems. The findings provide essential insights into the properties of each algorithm, demonstrating their ability to outperform existing methods and contribute to a more versatile and efficient approach to quality assurance in industrial settings.
- 30 June 2024
- Published by IGI Global Scientific Publishing
- p. 49-66
Machine Learning in Industrial IoT Applications for Safety, Security, Asset Localization, Quality Assurance, and Sustainability in Smart Production
This study explores the integration of machine learning techniques, notably Support Vector Machines (SVM) and Convolutional Neural Networks (CNN), with industrial production processes for quality assurance. The emphasis is on examining the performance of SVM and CNN through a rigorous assessment of precision, recall, and F1 score in the Performance Metrics Evaluation. Additionally, the study tests the algorithms against existing baseline approaches, evaluating their accuracy and efficiency in fault identification. The results reveal the consistent and strong performance of SVM and CNN, highlighting their revolutionary potential in revolutionizing quality control systems. The findings provide essential insights into the properties of each algorithm, demonstrating their ability to outperform existing methods and contribute to a more versatile and efficient approach to quality assurance in industrial settings.
- 29 June 2024
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (6) , 9149-9158
Performance evaluation of luffa-sugarcane bagasse-based polymer-reinforced composites using Taguchi’s method
- 29 June 2024
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (6) , 9149-9158
Performance evaluation of luffa-sugarcane bagasse-based polymer-reinforced composites using Taguchi’s method
- 18 June 2024
- Published by Springer Nature in Silicon
- Vol. 16 (12) , 5073-5085
Development of Biocomposite Food Packaging Coating Material with Silane-treated Nanosilica and Grape Seed Oil Blended Vinyl Ester
- 18 June 2024
- Published by Springer Nature in Silicon
- Vol. 16 (12) , 5073-5085
Development of Biocomposite Food Packaging Coating Material with Silane-treated Nanosilica and Grape Seed Oil Blended Vinyl Ester
- 5 October 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (2) , 3215-3222
Effect of palm sprout fiber and palm kernal de-oiled cake cellulose on mechanical, fatigue, and DMA properties of toughened vinyl ester composites
- 5 October 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (2) , 3215-3222
Effect of palm sprout fiber and palm kernal de-oiled cake cellulose on mechanical, fatigue, and DMA properties of toughened vinyl ester composites
- 15 July 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (20) , 25411-25419
Load-bearing characteristics of a hybird Si3N4-epoxy composite
- 15 July 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (20) , 25411-25419
Load-bearing characteristics of a hybird Si3N4-epoxy composite
- 2 May 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (18) , 22329-22337
Development of thermally reduced corn stover biochar and its satin weaved sisal-reinforced vinyl ester composites
- 2 May 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (18) , 22329-22337
Development of thermally reduced corn stover biochar and its satin weaved sisal-reinforced vinyl ester composites
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 26, e20230178
Experimental Investigation on Metallurgical and Mechanical Properties and Wear Behavior of Al5032/SiC Nanocomposites
Aluminium metal matrix composites are highly dominated composites for various applications such as military, marine, aircraft, aerospace and automobile because of their corrosion resistance, tribological and mechanical properties. In this research, aluminium alloy 5032 composite reinforced with SiCnp (4, 8, 12 and 16 wt.%) was manufactured using stir casting method and subjected to various mechanical, metallurgical and wear tests. The novelty of this research lies in the fabrication and characterization of Al5032/SiCnp composites, which has been not done before. The Energy Dispersive X ray analysis (EDAX) was used to examine the presence of SiC in Al5032 matrix and Scanning Electron Microscope (SEM) was employed to examine the microstructure of the composite. Further micro hardness, wear resistance, tensile and impact tests were carried out. The aforesaid properties increases upto 12 wt.% addition of silicon carbide in Al5032 alloy and thereafter reduces. The nanocomposite Al5032/12wt.%SiC exhibits 98 HV, 256 MPa tensile strength, 19 MPa impact strength and 5 mg wear loss.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 26, e20230178
Open AccessExperimental Investigation on Metallurgical and Mechanical Properties and Wear Behavior of Al5032/SiC Nanocomposites
Aluminium metal matrix composites are highly dominated composites for various applications such as military, marine, aircraft, aerospace and automobile because of their corrosion resistance, tribological and mechanical properties. In this research, aluminium alloy 5032 composite reinforced with SiCnp (4, 8, 12 and 16 wt.%) was manufactured using stir casting method and subjected to various mechanical, metallurgical and wear tests. The novelty of this research lies in the fabrication and characterization of Al5032/SiCnp composites, which has been not done before. The Energy Dispersive X ray analysis (EDAX) was used to examine the presence of SiC in Al5032 matrix and Scanning Electron Microscope (SEM) was employed to examine the microstructure of the composite. Further micro hardness, wear resistance, tensile and impact tests were carried out. The aforesaid properties increases upto 12 wt.% addition of silicon carbide in Al5032 alloy and thereafter reduces. The nanocomposite Al5032/12wt.%SiC exhibits 98 HV, 256 MPa tensile strength, 19 MPa impact strength and 5 mg wear loss.