Gabriel Salierno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Gabriel Salierno has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Miryan Cassanello
Facultad de Ciencias Exactas y Naturales, Departamento de Industrias, Universidad de Buenos Aires, Intendente Guiraldes 2160, C1428BGA Ciudad de Buenos Aires, Argentina
20 shared publications - Mauricio Maestri
Departamento de Industrias, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires; Ciudad Universitaria, Buenos Aires, Argentina
12 shared publications Héctor Somacal
Laboratorio de Diagn6sticos por Radiaciones, Dep. Fisica Experimental, Comisi6n Nacional de Energia At6mica, BKNA1650 San Martin, Buenos Aires, Argentina
10 shared publicationsDaniel Hojman
Laboratorio de Diagn6sticos por Radiaciones, Dep. Fisica Experimental, Comisi6n Nacional de Energia At6mica, BKNA1650 San Martin, Buenos Aires, Argentina
9 shared publicationsMaría Angélica Cardona
Laboratorio de Diagnósticos por Radiaciones, Dep. Física Experimental, Comisión Nacional de Energía Atómica—San Martín, Buenos Aires, Argentina
9 shared publicationsStella Piovano
7 shared publications
Latest Publications
- Open Access
- 24 October 2026
- Published by American Chemical Society (ACS) in ACS Materials Au
- Vol. 6 (6) , 1673-1683
Machine Learning with Iterative Error-Driven Refinement for Predicting PFAS-Coated Surface Wettability
PFAS coatings impart strong water and oil repellency on materials, but their environmental persistence necessitates sustainable alternatives. The development of alternative chemistries is hindered by limited mechanistic understanding of how molecular structure and surface organization govern intrinsic water and oil wettability. Here, a machine learning-driven molecular dynamics (MD) simulation framework was developed to predict and rationalize the intrinsic water and oil wettability of PFAS coatings on nylon for both water and oil. By systematically sampling PFAS head group types (−CHO, −COOH, −OH, and −SO3H), chain lengths from C1–C7, surface packing densities (1.42–4.65 nm–2), and both linear and branched isomers, a comprehensive database of MD-derived contact angles was constructed. A data-efficient, error-driven refinement strategy enables accurate prediction of water and oil contact angles with mean absolute errors below 3° for linear PFAS and below 5° for branched isomers. Analysis shows that intrinsic water and oil repellency peaks at intermediate packing densities rather than at the highest packing density. Moreover, water repellency depends more on chain length than oil repellency, and head group chemistry strongly modulates these effects. Oil contact angles are typically ∼10–20° lower than water contact angles, consistent with experimental observations. This work provides molecular-level insight into the intrinsic water and oil wettability of PFAS coatings and establishes a data-driven framework that may support the future rational design and screening of environmentally benign, non-PFAS coating chemistries.
- 24 October 2026
- Published by American Chemical Society (ACS) in ACS Materials Au
- Vol. 6 (6) , 1673-1683
Open AccessMachine Learning with Iterative Error-Driven Refinement for Predicting PFAS-Coated Surface Wettability
PFAS coatings impart strong water and oil repellency on materials, but their environmental persistence necessitates sustainable alternatives. The development of alternative chemistries is hindered by limited mechanistic understanding of how molecular structure and surface organization govern intrinsic water and oil wettability. Here, a machine learning-driven molecular dynamics (MD) simulation framework was developed to predict and rationalize the intrinsic water and oil wettability of PFAS coatings on nylon for both water and oil. By systematically sampling PFAS head group types (−CHO, −COOH, −OH, and −SO3H), chain lengths from C1–C7, surface packing densities (1.42–4.65 nm–2), and both linear and branched isomers, a comprehensive database of MD-derived contact angles was constructed. A data-efficient, error-driven refinement strategy enables accurate prediction of water and oil contact angles with mean absolute errors below 3° for linear PFAS and below 5° for branched isomers. Analysis shows that intrinsic water and oil repellency peaks at intermediate packing densities rather than at the highest packing density. Moreover, water repellency depends more on chain length than oil repellency, and head group chemistry strongly modulates these effects. Oil contact angles are typically ∼10–20° lower than water contact angles, consistent with experimental observations. This work provides molecular-level insight into the intrinsic water and oil wettability of PFAS coatings and establishes a data-driven framework that may support the future rational design and screening of environmentally benign, non-PFAS coating chemistries.
- Open Access
- 2 May 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (17) , e202400280
On the Chemical Pathways Influencing the Effective Global Warming Potential of Commercial Hydrofluoroolefin Gases
The enforcement of a global hydrofluorocarbon (HFC) refrigerant phase down led to the introduction of hydrofluoroolefins (HFOs) as a low Global Warming Potential (GWP) substitute, given their low atmospheric lifetime. However, to this date it is not fully clear the long‐term atmospheric fate of HFOs primary degradation products: trifluoro acetaldehyde (TFE), trifluoro acetyl fluoride (TFF), and trifluoroacetic acid (TFA). It particularly concerns the possibility of forming HFC‐23, a potent global warming agent. Although the atmospheric reaction networks of TFE, TFF, and TFA have a fair level of complexity, the relevant atmospheric chemical pathways are well characterized in the literature, enabling a comprehensive hazard assessment of HFC‐23 formation as a secondary HFO breakdown product in diverse scenarios. A lower bound of the HFOs effective GWP in a baseline scenario is found above regulatory thresholds. While further research is crucial to refine climate risk assessments, the existing evidence suggests a non‐negligible climate hazard associated with HFOs.
- 2 May 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (17) , e202400280
Open AccessOn the Chemical Pathways Influencing the Effective Global Warming Potential of Commercial Hydrofluoroolefin Gases
The enforcement of a global hydrofluorocarbon (HFC) refrigerant phase down led to the introduction of hydrofluoroolefins (HFOs) as a low Global Warming Potential (GWP) substitute, given their low atmospheric lifetime. However, to this date it is not fully clear the long‐term atmospheric fate of HFOs primary degradation products: trifluoro acetaldehyde (TFE), trifluoro acetyl fluoride (TFF), and trifluoroacetic acid (TFA). It particularly concerns the possibility of forming HFC‐23, a potent global warming agent. Although the atmospheric reaction networks of TFE, TFF, and TFA have a fair level of complexity, the relevant atmospheric chemical pathways are well characterized in the literature, enabling a comprehensive hazard assessment of HFC‐23 formation as a secondary HFO breakdown product in diverse scenarios. A lower bound of the HFOs effective GWP in a baseline scenario is found above regulatory thresholds. While further research is crucial to refine climate risk assessments, the existing evidence suggests a non‐negligible climate hazard associated with HFOs.
- Open Access
- 28 March 2023
- Published by Qeios Ltd
Review of: "Dynamics of blood cells during a routine laboratory examination"
The author addressed the dynamics of blood cells during a routine laboratory examination through the application of a simplified version of the Fokker-Planck equation composed with the Langevin equation. The findings of this study are interesting and...
- 28 March 2023
- Published by Qeios Ltd
Open AccessReview of: "Dynamics of blood cells during a routine laboratory examination"
The author addressed the dynamics of blood cells during a routine laboratory examination through the application of a simplified version of the Fokker-Planck equation composed with the Langevin equation. The findings of this study are interesting and...
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2731 (1)
Granular dynamics and stability study on a fully validated pilot-scale liquid-solid fluidized bed simulation
Many processes and operations in the chemical and related industries are carried out in liquid-solid fluidized beds. Information of their underlying dynamics is fundamental for the proper unit design and implementation process intensification strategies. The objective of this work is to examine the granular dynamics of calcium alginate spheres fluidized by the upward flow of water in a cylindrical column predicted by a Computational Fluid Dynamics coupled with Discrete Element Method model, recently validated by comparison with experimental results obtained from the Radioactive Particle Tracking technique in a pilot-scale liquid-solid fluidized bed. The liquid and solid motion were simulated using the Linux-based open-source software CFDEM®. In this work, the main contributions to the solid particle mechanics are related to the liquid flow intensity in a wide range within the fluidization region. Trend breakings in the potential-to-kinetic energy ratio and Glansdorff-Prigogine stability denote different granular flow regimes.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2731 (1)
Open AccessGranular dynamics and stability study on a fully validated pilot-scale liquid-solid fluidized bed simulation
Many processes and operations in the chemical and related industries are carried out in liquid-solid fluidized beds. Information of their underlying dynamics is fundamental for the proper unit design and implementation process intensification strategies. The objective of this work is to examine the granular dynamics of calcium alginate spheres fluidized by the upward flow of water in a cylindrical column predicted by a Computational Fluid Dynamics coupled with Discrete Element Method model, recently validated by comparison with experimental results obtained from the Radioactive Particle Tracking technique in a pilot-scale liquid-solid fluidized bed. The liquid and solid motion were simulated using the Linux-based open-source software CFDEM®. In this work, the main contributions to the solid particle mechanics are related to the liquid flow intensity in a wide range within the fluidization region. Trend breakings in the potential-to-kinetic energy ratio and Glansdorff-Prigogine stability denote different granular flow regimes.
- Open Access
Biological Hydrogen Production by Dark Fermentation in a Stirred Tank Reactor and Its Correlation with the pH Time Evolution
Dark fermentation is a hydrogen generating process carried out by anaerobic spore-forming bacteria that metabolize carbon sources producing gas and short-chain acids. The process can be controlled, and the hydrogen harvested if bacteria are grown in a reactor with favorable conditions. In this work, bacteria selected from natural sources were grown with a defined culture media, while pH was monitored, with the aim of relating the amount of generated hydrogen to the increase in hydron ion concentration. Therefore, a model based on the acid-base species mass balance is proposed and solved to estimate the lag phase time and measure the hydrogen production efficiency and kinetics. Hydrogen production in a stirred batch reactor was performed for 150–200 h, at given operating conditions using a previously defined growth media, to validate the model. Using the proposed model, the cumulated moles of produced hydrogen correlate well with those predicted from the pH curve. Hence, the modified Gompertz model parameters, largely used for describing the hydrogen generation kinetics by dark fermentation, were estimated from the pH curve and from the experimentally measured generated hydrogen. Satisfactory agreement was found, thus, validating the method.
Open AccessBiological Hydrogen Production by Dark Fermentation in a Stirred Tank Reactor and Its Correlation with the pH Time Evolution
Dark fermentation is a hydrogen generating process carried out by anaerobic spore-forming bacteria that metabolize carbon sources producing gas and short-chain acids. The process can be controlled, and the hydrogen harvested if bacteria are grown in a reactor with favorable conditions. In this work, bacteria selected from natural sources were grown with a defined culture media, while pH was monitored, with the aim of relating the amount of generated hydrogen to the increase in hydron ion concentration. Therefore, a model based on the acid-base species mass balance is proposed and solved to estimate the lag phase time and measure the hydrogen production efficiency and kinetics. Hydrogen production in a stirred batch reactor was performed for 150–200 h, at given operating conditions using a previously defined growth media, to validate the model. Using the proposed model, the cumulated moles of produced hydrogen correlate well with those predicted from the pH curve. Hence, the modified Gompertz model parameters, largely used for describing the hydrogen generation kinetics by dark fermentation, were estimated from the pH curve and from the experimentally measured generated hydrogen. Satisfactory agreement was found, thus, validating the method.
- Open Access
- 1 September 2022
- Published by Elsevier in Particuology
- Vol. 68, 75-87
Validation of CFD-DEM simulation of a liquid–solid fluidized bed by dynamic analysis of time series
- 1 September 2022
- Published by Elsevier in Particuology
- Vol. 68, 75-87
Open AccessValidation of CFD-DEM simulation of a liquid–solid fluidized bed by dynamic analysis of time series
- 8 June 2022
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 33 (9) , 094004
Study on the aggregate motion for gas–liquid–solid agitated tank reactors design using radioactive particle tracking
This work provides a detailed study on the agitation rate influence on the solid motion within a pilot-scale slurry tank containing nickel oxide particle agglomerates suspended in iso-octane by the action of an axial impeller and slight bubbling nitrogen gas. The behaviour of a tracer particle representing solid aggregates is determined from radioactive particle tracking measurements with a spatial accuracy of ∼2 mm. An increase in the overall space occupied by the tracer is observed with increasing stirring speed. The instantaneous velocities, calculated by time differentiation of successive tracer positions, are significantly higher than the dynamic error. A measure based on the Reynolds stress as the turbulence level estimator is reliably mapped in three dimensions from the ensemble-averaged correlation matrix of the Lagrangian tracer velocity, enabling studying the influence of agitation on the turbulence levels distribution. This study offers an improved understanding of three-phase stirred reactors, which efficiencies are heavily coupled to complex fluid mechanics, especially in a turbulent flow. The axisymmetry is broken due to the presence of baffles. Incrementing the agitation intensity reduces the axial coherence of the thrust on the solid phase, raising turbulence levels, especially nearby the impeller tip.
- 8 June 2022
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 33 (9) , 094004
Study on the aggregate motion for gas–liquid–solid agitated tank reactors design using radioactive particle tracking
This work provides a detailed study on the agitation rate influence on the solid motion within a pilot-scale slurry tank containing nickel oxide particle agglomerates suspended in iso-octane by the action of an axial impeller and slight bubbling nitrogen gas. The behaviour of a tracer particle representing solid aggregates is determined from radioactive particle tracking measurements with a spatial accuracy of ∼2 mm. An increase in the overall space occupied by the tracer is observed with increasing stirring speed. The instantaneous velocities, calculated by time differentiation of successive tracer positions, are significantly higher than the dynamic error. A measure based on the Reynolds stress as the turbulence level estimator is reliably mapped in three dimensions from the ensemble-averaged correlation matrix of the Lagrangian tracer velocity, enabling studying the influence of agitation on the turbulence levels distribution. This study offers an improved understanding of three-phase stirred reactors, which efficiencies are heavily coupled to complex fluid mechanics, especially in a turbulent flow. The axisymmetry is broken due to the presence of baffles. Incrementing the agitation intensity reduces the axial coherence of the thrust on the solid phase, raising turbulence levels, especially nearby the impeller tip.
- Open Access
- 24 May 2022
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 33 (8) , 085303
Self-organizing maps for efficient classification of flow regimes from gamma densitometry time series in three-phase fluidized beds
The potential of artificial neural networks as a tool to classify and identify a change in the flow regime of a three-phase fluidized bed is studied. Particularly, the suitability of self-organizing maps (SOMs), unsupervised neural networks that visualize the data in a lower dimension, is evaluated. Statistical features of experimental time series determined in a three-phase (granulated carbon-air-water) fluidized bed are extracted as inputs to train the SOM. Photon-count time series are obtained along the fluidized bed vertical axis by gamma-densitometry at different operative conditions. Then, they are analyzed to determine the underlying flow regime indexes. When each input data is presented to the SOMs, a neuron is activated, giving a visual representation of the data. The resulting models show three different regions on the map for the homogenous, transition, and heterogeneous flow regimes. Once these regions are delimited, the map can quickly classify the equipment operating conditions. The ability of the SOMs to diagnose a flow transition is verified against visual observation and gas hold-up trends. The conclusions are tested for their sensitivity to alternative axial positions of the radiation source used for the densitometry.
- 24 May 2022
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 33 (8) , 085303
Open AccessSelf-organizing maps for efficient classification of flow regimes from gamma densitometry time series in three-phase fluidized beds
The potential of artificial neural networks as a tool to classify and identify a change in the flow regime of a three-phase fluidized bed is studied. Particularly, the suitability of self-organizing maps (SOMs), unsupervised neural networks that visualize the data in a lower dimension, is evaluated. Statistical features of experimental time series determined in a three-phase (granulated carbon-air-water) fluidized bed are extracted as inputs to train the SOM. Photon-count time series are obtained along the fluidized bed vertical axis by gamma-densitometry at different operative conditions. Then, they are analyzed to determine the underlying flow regime indexes. When each input data is presented to the SOMs, a neuron is activated, giving a visual representation of the data. The resulting models show three different regions on the map for the homogenous, transition, and heterogeneous flow regimes. Once these regions are delimited, the map can quickly classify the equipment operating conditions. The ability of the SOMs to diagnose a flow transition is verified against visual observation and gas hold-up trends. The conclusions are tested for their sensitivity to alternative axial positions of the radiation source used for the densitometry.
- Open Access
A Cleaner Delignification of Urban Leaf Waste Biomass for Bioethanol Production, Optimised by Experimental Design
This work is focused on optimising a low-temperature delignification as holocellulose purification pretreatment of Platanus acerifolia leaf waste for second-bioethanol production. Delignification was accomplished by acid-oxidative digestion using green reagents: acetic acid and 30% hydrogen peroxide 1:1. The effect of reaction time (30–90 min), temperature (60–90 °C), and solid loading (5–15 g solid/20 g liquid) on delignification and solid fraction yield were studied. The process parameters were optimised using the Box–Behnken experimental design. The highest attained lignin removal efficiency was larger than 80%. The optimised conditions of delignification, while maximising holocellulose yield, pointed to using the minimum temperature of the examined range. Analysis of variance on the solid fraction yield and the lignin removal suggested a linear model with a negative influence of the temperature on the yield. Furthermore, a negative effect of the solid loading and low effect of temperature and time was found on the degree of delignification. Then the temperature range was extended back to 60 °C, providing 71% holocellulose yield and 70% while improving energy efficiency by working at a lower temperature. Successful lignin removal was confirmed using confocal laser scanning microscopy. As evaluated by scanning electron microscopy, the solid structure presented an increased exposition of the cellulose fibre structure.
Open AccessA Cleaner Delignification of Urban Leaf Waste Biomass for Bioethanol Production, Optimised by Experimental Design
This work is focused on optimising a low-temperature delignification as holocellulose purification pretreatment of Platanus acerifolia leaf waste for second-bioethanol production. Delignification was accomplished by acid-oxidative digestion using green reagents: acetic acid and 30% hydrogen peroxide 1:1. The effect of reaction time (30–90 min), temperature (60–90 °C), and solid loading (5–15 g solid/20 g liquid) on delignification and solid fraction yield were studied. The process parameters were optimised using the Box–Behnken experimental design. The highest attained lignin removal efficiency was larger than 80%. The optimised conditions of delignification, while maximising holocellulose yield, pointed to using the minimum temperature of the examined range. Analysis of variance on the solid fraction yield and the lignin removal suggested a linear model with a negative influence of the temperature on the yield. Furthermore, a negative effect of the solid loading and low effect of temperature and time was found on the degree of delignification. Then the temperature range was extended back to 60 °C, providing 71% holocellulose yield and 70% while improving energy efficiency by working at a lower temperature. Successful lignin removal was confirmed using confocal laser scanning microscopy. As evaluated by scanning electron microscopy, the solid structure presented an increased exposition of the cellulose fibre structure.
- 8 November 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (46) , 16653-16664
Continuous Heterogeneous Fenton-Type Process for Dye Pollution Abatement Intensified by Hydrodynamic Cavitation
- 8 November 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (46) , 16653-16664
Continuous Heterogeneous Fenton-Type Process for Dye Pollution Abatement Intensified by Hydrodynamic Cavitation