Sujoy Sarkar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sujoy Sarkar has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
Debdyuti Mukherjee
6 shared publications- Daniel Mandler
Singapore‐HUJ Alliance for Research and Enterprise (SHARE) Smart Grippers for Soft Robotics (SGSR) Campus for Research Excellence and Technological Enterprise Singapore Singapore
5 shared publications - Debdyuti Mukherjee
Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560012, India
4 shared publications Abhik Bhuin
Department of Physics, School of Advanced Sciences, Vellore Institute of Technology Chennai, Vandalur-Kelambakkam Road, Chennai-600127, Tamil Nadu, India
3 shared publications- Ajayan Vinu
The University of Newcastle
2 shared publications Daniel Mandler
2 shared publications
Latest Publications
- 8 October 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 282
Engineering 2D/1D Ni3Co1-LDH/CNTs heterostructures for energy-efficient urea electrooxidation
- 8 October 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 282
Engineering 2D/1D Ni3Co1-LDH/CNTs heterostructures for energy-efficient urea electrooxidation
- 20 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (9) , 4986-5000
Cobalt-Doped Nickel-Based MXene with Fluorinated Terminal Groups (Co−Ni3C−F) as a Bifunctional Electrocatalyst for Overall Water Splitting and Anion Exchange Membrane Water-Electrolyzers
Designing efficient and cost-effective bifunctional electrocatalysts for overall water splitting is burgeoning for sustainable hydrogen production. Though Pt−C and RuO2 are known as the state-of-the-art catalysts for electrochemical hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively, it is essential to find alternatives based on cost-effective, efficient, and earth-abundant elements. In this direction, the present work explores nickel-based MXenes (Ni3C−F, where F indicates fluorinated terminal functional groups), a class of ceramic 2D-layered materials, as a bifunctional electrocatalyst toward OER and HER in alkaline media (1 M KOH). Further, the incorporation of cobalt into the Ni3C−F matrix modulates the electronic environments of the composite catalyst (Co−Ni3C−F), which improves its electrocatalytic activities toward both HER and OER. Studies reveal that to attain a 10 mA cm−2 current density, Co−Ni3C−F requires only ∼40 mV of extra overpotential as compared to the state-of-the-art catalysts for both HER (20 wt % Pt−C) and OER (RuO2) in an alkaline environment (1 M KOH solution). Moreover, the ηonset (OER−HER) and the η10 mA cm−2(OER−HER) values for the Co−Ni3C−F catalyst are ∼1.46 V (which is only 0.23 V extra as compared to the E0water splitting) and ∼1.62 V, respectively. Further, Co−Ni3C−F was used as an electrode material (both cathode and anode) in Anion Exchange Membrane Water-Electrolyzers (AEMWE), where, by applying 380 mA cm−2 current density, the cell potential reaches 2V. This offers an aspiration for the evolution of electrocatalysts in sustainable energy technologies.
- 20 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (9) , 4986-5000
Cobalt-Doped Nickel-Based MXene with Fluorinated Terminal Groups (Co−Ni3C−F) as a Bifunctional Electrocatalyst for Overall Water Splitting and Anion Exchange Membrane Water-Electrolyzers
Designing efficient and cost-effective bifunctional electrocatalysts for overall water splitting is burgeoning for sustainable hydrogen production. Though Pt−C and RuO2 are known as the state-of-the-art catalysts for electrochemical hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively, it is essential to find alternatives based on cost-effective, efficient, and earth-abundant elements. In this direction, the present work explores nickel-based MXenes (Ni3C−F, where F indicates fluorinated terminal functional groups), a class of ceramic 2D-layered materials, as a bifunctional electrocatalyst toward OER and HER in alkaline media (1 M KOH). Further, the incorporation of cobalt into the Ni3C−F matrix modulates the electronic environments of the composite catalyst (Co−Ni3C−F), which improves its electrocatalytic activities toward both HER and OER. Studies reveal that to attain a 10 mA cm−2 current density, Co−Ni3C−F requires only ∼40 mV of extra overpotential as compared to the state-of-the-art catalysts for both HER (20 wt % Pt−C) and OER (RuO2) in an alkaline environment (1 M KOH solution). Moreover, the ηonset (OER−HER) and the η10 mA cm−2(OER−HER) values for the Co−Ni3C−F catalyst are ∼1.46 V (which is only 0.23 V extra as compared to the E0water splitting) and ∼1.62 V, respectively. Further, Co−Ni3C−F was used as an electrode material (both cathode and anode) in Anion Exchange Membrane Water-Electrolyzers (AEMWE), where, by applying 380 mA cm−2 current density, the cell potential reaches 2V. This offers an aspiration for the evolution of electrocatalysts in sustainable energy technologies.
- Top Cited Papers
- 13 February 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 671
Optimizing Ni/Co ratios in NiCo-LDH for enhanced hydrogen and oxygen evolution reactions in overall water splitting
- 13 February 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 671
Top Cited PapersOptimizing Ni/Co ratios in NiCo-LDH for enhanced hydrogen and oxygen evolution reactions in overall water splitting
- 1 October 2025
- Published by Springer Nature
- p. 361-369
Single or Few Layers Palladium Phosphoselenide (PdPSe) for Hydrogen Evolution and Li-Ion Storage
- 1 October 2025
- Published by Springer Nature
- p. 361-369
Single or Few Layers Palladium Phosphoselenide (PdPSe) for Hydrogen Evolution and Li-Ion Storage
- 3 July 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (28) , 14058-14062
Efficacy of Methylammonium Iodobismuthate: A Green Catalyst for Reduction of Nitrate to Ammonia
Ammonia (NH3) is vital in agriculture and industry, yet its large-scale production remains energy-intensive and environmentally hostile. Herein, for the first time we report the development of lead-free nontoxic hexagonal methylammonium iodobismuthate metal halide perovskite (MABI) as a highly efficient and sustainable electrocatalyst for green ammonia production from nitrate reduction. The unique structure of MABI, featuring an isolated BiI6 octahedron stabilized by a methylammonium cation, offers a highly tunable electronic environment required for nitrogen activation and hydrogenation. The experimental and computational studies categorically established the formation of an interconnected pure hexagonal structure with a band gap of ∼2.1 eV. Electrocatalytic nitrate reduction revealed that MABI displays a remarkable ammonia yield (27.53 μg mg-1 h-1) with excellent stability and a quite impressive Faradaic efficiency (40%). This work highlights the potential of halide bismuthate perovskites as an alternative to traditional catalysts to produce ammonia in ambient conditions that address the dual challenges of energy efficiency and environmental sustainability.
- 3 July 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (28) , 14058-14062
Efficacy of Methylammonium Iodobismuthate: A Green Catalyst for Reduction of Nitrate to Ammonia
Ammonia (NH3) is vital in agriculture and industry, yet its large-scale production remains energy-intensive and environmentally hostile. Herein, for the first time we report the development of lead-free nontoxic hexagonal methylammonium iodobismuthate metal halide perovskite (MABI) as a highly efficient and sustainable electrocatalyst for green ammonia production from nitrate reduction. The unique structure of MABI, featuring an isolated BiI6 octahedron stabilized by a methylammonium cation, offers a highly tunable electronic environment required for nitrogen activation and hydrogenation. The experimental and computational studies categorically established the formation of an interconnected pure hexagonal structure with a band gap of ∼2.1 eV. Electrocatalytic nitrate reduction revealed that MABI displays a remarkable ammonia yield (27.53 μg mg-1 h-1) with excellent stability and a quite impressive Faradaic efficiency (40%). This work highlights the potential of halide bismuthate perovskites as an alternative to traditional catalysts to produce ammonia in ambient conditions that address the dual challenges of energy efficiency and environmental sustainability.
- 17 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (17) , 8763-8775
Fabrication of a solution-processed low voltage TFT by using colloid 2D ZnO nanosheets and its application as a UV photodetector
ZnO nanostructures have been extensively employed in optoelectronic devices because of their unique optoelectronic properties; however, these devices have been developed using physical vapor deposition techniques, which are costly and need a state-of-the-art fabrication facility. Hence, a solution-processed, cost-effective, low-temperature method is required for the large-scale fabrication of 2D material-based electronic devices. In this contribution, we report template, polymer, and surfactant-free wet chemical synthesis of 2D ZnO nanostructures having dimensions of ∼200 nm and thickness of ∼30 nm following the hydrothermal method. Detailed structural, morphological, and optical investigation revealed the formation of a pure hexagonal wurtzite phase of ZnO nanosheets. Utilizing the as-synthesized nanosheets, solution-processed thin film transistors (TFTs) are fabricated under low annealing temperatures that exhibit a high carrier mobility of 8.05 cm2 V−1 s−1 and an on–off ratio of ∼105. Also, these TFTs show high photosensitivity and can be used as UV detectors. Thus, our study highlights low-temperature facile fabrication of 2D ZnO TFTs, which may have promising applications in electronic displays, logic circuits, UV detectors, biosensors, and portable electronics.
- 17 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (17) , 8763-8775
Fabrication of a solution-processed low voltage TFT by using colloid 2D ZnO nanosheets and its application as a UV photodetector
ZnO nanostructures have been extensively employed in optoelectronic devices because of their unique optoelectronic properties; however, these devices have been developed using physical vapor deposition techniques, which are costly and need a state-of-the-art fabrication facility. Hence, a solution-processed, cost-effective, low-temperature method is required for the large-scale fabrication of 2D material-based electronic devices. In this contribution, we report template, polymer, and surfactant-free wet chemical synthesis of 2D ZnO nanostructures having dimensions of ∼200 nm and thickness of ∼30 nm following the hydrothermal method. Detailed structural, morphological, and optical investigation revealed the formation of a pure hexagonal wurtzite phase of ZnO nanosheets. Utilizing the as-synthesized nanosheets, solution-processed thin film transistors (TFTs) are fabricated under low annealing temperatures that exhibit a high carrier mobility of 8.05 cm2 V−1 s−1 and an on–off ratio of ∼105. Also, these TFTs show high photosensitivity and can be used as UV detectors. Thus, our study highlights low-temperature facile fabrication of 2D ZnO TFTs, which may have promising applications in electronic displays, logic circuits, UV detectors, biosensors, and portable electronics.
- Open Access
- 8 December 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (52) , 51136-51145
Synthesis of Tin Oxide Nanoparticles from E-Waste for Photocatalytic Mixed-Dye Degradation under Sunlight
Electronic waste (e-waste) has become a significant environmental concern worldwide due to the rapid advancement of technology and short product lifecycles. Waste-printed electronic boards (WPCBs) contain valuable metals and semiconductors; among them, tin can be recycled and repurposed for sustainable material production. This study presents a potential ecofriendly methodology for the recovery of tin from WPCBs in the form of tin oxide nanostructured powders. The soldering points in the WPCBs are extracted and dissolved in the dilute HNO3 solution, followed by the formation of metastannic acid, which is subsequently transformed into SnO2 nanoparticles. Different characterization techniques (XRD, XPS, FE-SEM, and TEM) are employed to confirm the morphology and composition of nanoparticles. The prepared SnO2 NPs, having a size range of 2 can degrade the mixed dyes (MB+EY) under the illumination of natural sunlight at rate constants of 0.0153 and 0.1103 min-1 for MB and EY, respectively. The positive zeta potential and smaller particle size of the SnO2 NPs possess the extra advantage of the adsorption of anionic over cationic dye, resulting in faster degradation of EY, which is further supported by DFT calculation. The synthesis of SnO2 from waste-printed electronic boards offers a dual benefit: It not only provides a sustainable solution for managing electronic waste but also contributes to the production of useful photocatalysts for wastewater treatment. By converting waste into valuable resources, this approach aligns with the principles of the circular economy and mitigates the environmental impact associated with e-waste disposal.
- 8 December 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (52) , 51136-51145
Open AccessSynthesis of Tin Oxide Nanoparticles from E-Waste for Photocatalytic Mixed-Dye Degradation under Sunlight
Electronic waste (e-waste) has become a significant environmental concern worldwide due to the rapid advancement of technology and short product lifecycles. Waste-printed electronic boards (WPCBs) contain valuable metals and semiconductors; among them, tin can be recycled and repurposed for sustainable material production. This study presents a potential ecofriendly methodology for the recovery of tin from WPCBs in the form of tin oxide nanostructured powders. The soldering points in the WPCBs are extracted and dissolved in the dilute HNO3 solution, followed by the formation of metastannic acid, which is subsequently transformed into SnO2 nanoparticles. Different characterization techniques (XRD, XPS, FE-SEM, and TEM) are employed to confirm the morphology and composition of nanoparticles. The prepared SnO2 NPs, having a size range of 2 can degrade the mixed dyes (MB+EY) under the illumination of natural sunlight at rate constants of 0.0153 and 0.1103 min-1 for MB and EY, respectively. The positive zeta potential and smaller particle size of the SnO2 NPs possess the extra advantage of the adsorption of anionic over cationic dye, resulting in faster degradation of EY, which is further supported by DFT calculation. The synthesis of SnO2 from waste-printed electronic boards offers a dual benefit: It not only provides a sustainable solution for managing electronic waste but also contributes to the production of useful photocatalysts for wastewater treatment. By converting waste into valuable resources, this approach aligns with the principles of the circular economy and mitigates the environmental impact associated with e-waste disposal.
- 28 October 2024
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 7 (6) , 1-35
Selective electroreduction of CO2 to value-added C1 and C2 products using MOF and COF-based catalysts
- 28 October 2024
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 7 (6) , 1-35
Selective electroreduction of CO2 to value-added C1 and C2 products using MOF and COF-based catalysts
- 25 September 2024
- Published by Elsevier in Catalysis Today
- Vol. 445
Two-dimensional PdPS: A multifunctional electrocatalyst towards HER, ORR, and supercapacitor applications
- 25 September 2024
- Published by Elsevier in Catalysis Today
- Vol. 445
Two-dimensional PdPS: A multifunctional electrocatalyst towards HER, ORR, and supercapacitor applications