Elizane Efigenia de Moraes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elizane Efigenia de Moraes has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Helio Chacham
Departamento de Física, ICEX, Universidade Federal de Minas Gerais, CP 702, Belo Horizonte 30123-970, MG, Brazil
8 shared publications - Bruno H. S. Mendonça
Departamento de Física, ICEX, Universidade Federal de Minas Gerais, CP 702, Belo Horizonte 30123-970, MG, Brazil
7 shared publications Alan B. de Oliveira
Departamento de Física, Universidade Federal de Ouro Preto, Campus Morro do Cruzeiro, 35400-000 Ouro Preto, Minas Gerais, Brazil
4 shared publications- José Rafael Bordin
Universidade Federal de Pelotas
4 shared publications - Ronaldo Junio Campos Batista
Departamento de Física, Universidade Federal de Ouro Preto, Campus Morro do Cruzeiro, 35400-000 Ouro Preto, Minas Gerais, Brazil
4 shared publications - Marcia Cristina Barbosa
Universidade Federal do Rio Grande do Sul
3 shared publications
Latest Publications
- Open Access
- 1 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (23) , 8078-8087
Influence of Carbon Nanocone Structure on Ultraefficient Water Flow
- 1 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (23) , 8078-8087
Open AccessInfluence of Carbon Nanocone Structure on Ultraefficient Water Flow
- Open Access
- 30 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (23) , 5971-5979
Dipole Alignment and Layered Flow Structure in Pressure-Driven Water Transport through MoS 2 Membranes
Efficient water transport through nanostructure membranes is essential for advancing filtration and desalination technologies. In this study, we investigate the flow of water through molybdenum disulfide (MoS2) nanopores of varying diameters using molecular dynamics simulations. The results demonstrate that both pore size and atomic edge composition play crucial roles in regulating water flux, molecular organization, and dipole orientation. Larger pores facilitate the formation of layered water structures and promote edge-accelerated flow, driven by strong electrostatic interactions between water molecules and exposed molybdenum atoms. In narrower pores, confinement and asymmetric edge chemistry induce the ordered alignment of dipoles, thereby enhancing directional transport. Velocity and density maps reveal that pore edges act as active zones, concentrating flow and reducing resistance. Our findings reveal that ordered dipole alignment in subnanometer pores is the fundamental mechanism driving directional water transport. Unlike previous studies focused primarily on desalination, we demonstrate that this molecular orientation is a distinguishing factor that governs flow stability. This discovery suggests that MoS2 membranes are not only efficient for filtration but also highly promising for nanofluidic sensors, where controlled molecular orientation is critical for dictating electrical signals and improving device sensitivity.
- 30 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (23) , 5971-5979
Open AccessDipole Alignment and Layered Flow Structure in Pressure-Driven Water Transport through MoS 2 Membranes
Efficient water transport through nanostructure membranes is essential for advancing filtration and desalination technologies. In this study, we investigate the flow of water through molybdenum disulfide (MoS2) nanopores of varying diameters using molecular dynamics simulations. The results demonstrate that both pore size and atomic edge composition play crucial roles in regulating water flux, molecular organization, and dipole orientation. Larger pores facilitate the formation of layered water structures and promote edge-accelerated flow, driven by strong electrostatic interactions between water molecules and exposed molybdenum atoms. In narrower pores, confinement and asymmetric edge chemistry induce the ordered alignment of dipoles, thereby enhancing directional transport. Velocity and density maps reveal that pore edges act as active zones, concentrating flow and reducing resistance. Our findings reveal that ordered dipole alignment in subnanometer pores is the fundamental mechanism driving directional water transport. Unlike previous studies focused primarily on desalination, we demonstrate that this molecular orientation is a distinguishing factor that governs flow stability. This discovery suggests that MoS2 membranes are not only efficient for filtration but also highly promising for nanofluidic sensors, where controlled molecular orientation is critical for dictating electrical signals and improving device sensitivity.
- Open Access
- 19 May 2026
- Published by Elsevier in Journal of Physics and Chemistry of Solids
- Vol. 217
Stable 1αH and 1αBT phases in MoOH and WOH hydroxide monolayers
- 19 May 2026
- Published by Elsevier in Journal of Physics and Chemistry of Solids
- Vol. 217
Open AccessStable 1αH and 1αBT phases in MoOH and WOH hydroxide monolayers
- 28 March 2026
- Published by Elsevier in Computational Condensed Matter
- Vol. 47
Advancing carbon nanoribbons: Structural and electronic properties
- 28 March 2026
- Published by Elsevier in Computational Condensed Matter
- Vol. 47
Advancing carbon nanoribbons: Structural and electronic properties
- Open Access
- 17 March 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (12) , 19752-19757
Assessment of Density Functional Approaches for Carbon Dioxide Dimerization and Solid-State Properties
We investigated the performance of various exchange–correlation functionals implemented in SIESTA, including van der Waals (vdW) dispersion corrections, specifically the (i) BH, (ii) C09, (iii) KBM, (iv) LMKLL, and (v) VV variants, as well as the generalized gradient approximation (GGA), to describe the interactions of CO2 homodimers using density functional theory (DFT). To the best of our knowledge, the application of these functionals to CO2 systems has not been previously reported in the literature. Accordingly, we calculated the interaction energies of the CO2 homodimers, their vibrational modes, and the solid-phase properties using vdW-DF3-type functionals. Among the dimer configurations analyzed, the T-shaped (TS) and parallel-displaced (PD) geometries were identified as the most stable. Notably, the qualitative and quantitative behavior of the vdW-DF-C09 functional for the PD configuration showed excellent agreement with results obtained from high-level CCSD(T)/SAPT calculations. Furthermore, vdW-DF-C09 successfully reproduced experimental data for the solid phase of CO2, including its symmetric, asymmetric, and bending vibrational modes. A comparative analysis of different van der Waals (vdW) functionals offers valuable insights for parametrizing force fields suitable for classical simulations. These findings provide a reliable benchmark for CO2–CO2 interactions and may serve as a reference for future force-field development and multiscale modeling studies.
- 17 March 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (12) , 19752-19757
Open AccessAssessment of Density Functional Approaches for Carbon Dioxide Dimerization and Solid-State Properties
We investigated the performance of various exchange–correlation functionals implemented in SIESTA, including van der Waals (vdW) dispersion corrections, specifically the (i) BH, (ii) C09, (iii) KBM, (iv) LMKLL, and (v) VV variants, as well as the generalized gradient approximation (GGA), to describe the interactions of CO2 homodimers using density functional theory (DFT). To the best of our knowledge, the application of these functionals to CO2 systems has not been previously reported in the literature. Accordingly, we calculated the interaction energies of the CO2 homodimers, their vibrational modes, and the solid-phase properties using vdW-DF3-type functionals. Among the dimer configurations analyzed, the T-shaped (TS) and parallel-displaced (PD) geometries were identified as the most stable. Notably, the qualitative and quantitative behavior of the vdW-DF-C09 functional for the PD configuration showed excellent agreement with results obtained from high-level CCSD(T)/SAPT calculations. Furthermore, vdW-DF-C09 successfully reproduced experimental data for the solid phase of CO2, including its symmetric, asymmetric, and bending vibrational modes. A comparative analysis of different van der Waals (vdW) functionals offers valuable insights for parametrizing force fields suitable for classical simulations. These findings provide a reliable benchmark for CO2–CO2 interactions and may serve as a reference for future force-field development and multiscale modeling studies.
- Open Access
- 3 March 2026
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 32 (4)
Adsorption of water on pristine graphene: a van der Waals density functional study with the vdW-C09 approach
Context: Understanding how water interacts with graphene at the molecular level is essential for advancing nanomaterial applications in filtration, catalysis, and environmental technologies. This study establishes a quantitative baseline for assessing how structural defects, dopants, or surface functionalization may enhance water adsorption, providing insights for the rational design of graphene-based materials in water purification, sensing, and nanofluidic applications. Methods: In this work, we employed density functional theory (DFT) with the vdW-C09 functional to investigate the adsorption of a single water molecule on pristine graphene, accurately accounting for long-range dispersion forces. Three high-symmetry adsorption sites—the center of the hexagonal ring, the C–C bond, and the top site—were explored in combination with three molecular orientations: Down, H-bond, and Up configurations. The calculated adsorption energies range from −93 to −145 meV, indicating that the interaction is dominated by weak van der Waals forces characteristic of physisorption. The most stable configuration corresponds to the Down orientation above the center of the hexagonal ring, with an adsorption energy of −145 meV and an equilibrium distance of 3.27 Å defined as the vertical separation between the oxygen atom of the water molecule and the graphene plane. These results are in close agreement with previous theoretical studies and confirm the non-reactive and hydrophobic nature of pristine graphene.
- 3 March 2026
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 32 (4)
Open AccessAdsorption of water on pristine graphene: a van der Waals density functional study with the vdW-C09 approach
Context: Understanding how water interacts with graphene at the molecular level is essential for advancing nanomaterial applications in filtration, catalysis, and environmental technologies. This study establishes a quantitative baseline for assessing how structural defects, dopants, or surface functionalization may enhance water adsorption, providing insights for the rational design of graphene-based materials in water purification, sensing, and nanofluidic applications. Methods: In this work, we employed density functional theory (DFT) with the vdW-C09 functional to investigate the adsorption of a single water molecule on pristine graphene, accurately accounting for long-range dispersion forces. Three high-symmetry adsorption sites—the center of the hexagonal ring, the C–C bond, and the top site—were explored in combination with three molecular orientations: Down, H-bond, and Up configurations. The calculated adsorption energies range from −93 to −145 meV, indicating that the interaction is dominated by weak van der Waals forces characteristic of physisorption. The most stable configuration corresponds to the Down orientation above the center of the hexagonal ring, with an adsorption energy of −145 meV and an equilibrium distance of 3.27 Å defined as the vertical separation between the oxygen atom of the water molecule and the graphene plane. These results are in close agreement with previous theoretical studies and confirm the non-reactive and hydrophobic nature of pristine graphene.
- Open Access
Adsorption of Water on Pristine Graphene: A van der Waals Density Functional Study with the vdW-C09 Approach
Understanding how water interacts with graphene at the molecular level is essential for advancing nanomaterial applications in filtration, catalysis, and environmental technologies. This study establishes a quantitative baseline for assessing how structural defects, dopants, or surface functionalization may enhance water adsorption, providing insights for the rational design of graphene-based materials in water purification, sensing, and nanofluidic applications. In this work, we employed density functional theory (DFT) with the vdW-C09 functional to investigate the adsorption of a single water molecule on pristine graphene, accurately accounting for long-range dispersion forces. Three high-symmetry adsorption sites-the center of the hexagonal ring, the C-C bond, and the top site-were explored in combination with three molecular orientations: Down, H-bond, and Up configurations. The calculated adsorption energies range from -93 to -145 meV (milli-electron volts), indicating that the interaction is dominated by weak van der Waals forces characteristic of physisorption. The most stable configuration corresponds to the Down orientation above the center of the hexagonal ring, with an adsorption energy of -145 meV and an equilibrium distance of 3.27 A (angstrom), defined as the vertical separation between the oxygen atom of the water molecule and the graphene plane. These results are in close agreement with previous theoretical studies and confirm the non-reactive and hydrophobic nature of pristine graphene.
Open AccessAdsorption of Water on Pristine Graphene: A van der Waals Density Functional Study with the vdW-C09 Approach
Understanding how water interacts with graphene at the molecular level is essential for advancing nanomaterial applications in filtration, catalysis, and environmental technologies. This study establishes a quantitative baseline for assessing how structural defects, dopants, or surface functionalization may enhance water adsorption, providing insights for the rational design of graphene-based materials in water purification, sensing, and nanofluidic applications. In this work, we employed density functional theory (DFT) with the vdW-C09 functional to investigate the adsorption of a single water molecule on pristine graphene, accurately accounting for long-range dispersion forces. Three high-symmetry adsorption sites-the center of the hexagonal ring, the C-C bond, and the top site-were explored in combination with three molecular orientations: Down, H-bond, and Up configurations. The calculated adsorption energies range from -93 to -145 meV (milli-electron volts), indicating that the interaction is dominated by weak van der Waals forces characteristic of physisorption. The most stable configuration corresponds to the Down orientation above the center of the hexagonal ring, with an adsorption energy of -145 meV and an equilibrium distance of 3.27 A (angstrom), defined as the vertical separation between the oxygen atom of the water molecule and the graphene plane. These results are in close agreement with previous theoretical studies and confirm the non-reactive and hydrophobic nature of pristine graphene.
- Open Access
- 24 January 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (3) , 160
Lennard–Jones Parameter Fitting for Gold/Water Interaction Based on Structural Analysis: A QM, MM, and QM/MM Study
The interaction between water and metallic interfaces is crucial in many fields, and accurate modeling requires good parametrizations using reference data. In classical molecular dynamics (MD), an important part of this interaction is described using the Lennard–Jones (LJ) potential. However, previously reported LJ parameters are not always optimal for capturing the metal/water interactions observed in ab initio descriptions such as density functional theory (DFT). Therefore, well-tailored LJ parameters are necessary to improve the description of water structuring metals in classical MD. The usual route for obtaining LJ parameters involves energetic analysis, where the energies of various structures are obtained via DFT calculations and then matched with the energies obtained using the LJ potentials by varying the sigma/epsilon parameters. Here, we show a different approach to fit LJ parameters for metal/water interactions, based on structural analysis. We report several classical MD simulations for gold/water, varying the sigma/epsilon parameters, comparing the resulting water structuring with that obtained using DFT. Additionally, we test these parameters in quantum mechanics/molecular mechanics (QM/MM) MD simulations, where electrostatic interactions are enabled. Our results demonstrate that the proposed approach can improve the LJ parameters reported in the literature and potentially develop parameters for more complex systems where the water structure above metallic surfaces plays a significant role. Finally, within this proposed approach, the water density profile obtained in hybrid QM/MM calculations, where water is treated as MM at a substantially reduced cost, closely matches the description it would have if treated as QM.
- 24 January 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (3) , 160
Open AccessLennard–Jones Parameter Fitting for Gold/Water Interaction Based on Structural Analysis: A QM, MM, and QM/MM Study
The interaction between water and metallic interfaces is crucial in many fields, and accurate modeling requires good parametrizations using reference data. In classical molecular dynamics (MD), an important part of this interaction is described using the Lennard–Jones (LJ) potential. However, previously reported LJ parameters are not always optimal for capturing the metal/water interactions observed in ab initio descriptions such as density functional theory (DFT). Therefore, well-tailored LJ parameters are necessary to improve the description of water structuring metals in classical MD. The usual route for obtaining LJ parameters involves energetic analysis, where the energies of various structures are obtained via DFT calculations and then matched with the energies obtained using the LJ potentials by varying the sigma/epsilon parameters. Here, we show a different approach to fit LJ parameters for metal/water interactions, based on structural analysis. We report several classical MD simulations for gold/water, varying the sigma/epsilon parameters, comparing the resulting water structuring with that obtained using DFT. Additionally, we test these parameters in quantum mechanics/molecular mechanics (QM/MM) MD simulations, where electrostatic interactions are enabled. Our results demonstrate that the proposed approach can improve the LJ parameters reported in the literature and potentially develop parameters for more complex systems where the water structure above metallic surfaces plays a significant role. Finally, within this proposed approach, the water density profile obtained in hybrid QM/MM calculations, where water is treated as MM at a substantially reduced cost, closely matches the description it would have if treated as QM.
- Open Access
- 19 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (4) , 1661-1671
Spontaneous Folding of Suspended and Supported Graphene, and Other 2D Materials: Morphologies and Induced Pre-Tension
- 19 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (4) , 1661-1671
Open AccessSpontaneous Folding of Suspended and Supported Graphene, and Other 2D Materials: Morphologies and Induced Pre-Tension
- Open Access
Dipole Alignment and Layered Flow Structure in Pressure-Driven Water Transport through MoS$_{2}$ Membranes
Efficient water transport through nanostructure membranes is essential for advancing filtration and desalination technologies. In this study, we investigate the flow of water through molybdenum disulfide (MoS$_{2}$) nanopores of varying diameters using molecular dynamics simulations. The results demonstrate that both pore size and atomic edge composition play crucial roles in regulating water flux, molecular organization, and dipole orientation. Larger pores facilitate the formation of layered water structures and promote edge-accelerated flow, driven by strong electrostatic interactions between water molecules and exposed molybdenum atoms. In narrower pores, confinement and asymmetric edge chemistry induce the ordered alignment of dipoles, thereby enhancing directional transport. Velocity and density maps reveal that pore edges act as active zones, concentrating flow and reducing resistance. These findings highlight the significance of pore geometry, surface chemistry, and molecular dynamics in influencing water behavior within MoS$_{2}$ membranes, providing valuable insights for the design of advanced nanofluidic and water purification systems.
Open AccessDipole Alignment and Layered Flow Structure in Pressure-Driven Water Transport through MoS$_{2}$ Membranes
Efficient water transport through nanostructure membranes is essential for advancing filtration and desalination technologies. In this study, we investigate the flow of water through molybdenum disulfide (MoS$_{2}$) nanopores of varying diameters using molecular dynamics simulations. The results demonstrate that both pore size and atomic edge composition play crucial roles in regulating water flux, molecular organization, and dipole orientation. Larger pores facilitate the formation of layered water structures and promote edge-accelerated flow, driven by strong electrostatic interactions between water molecules and exposed molybdenum atoms. In narrower pores, confinement and asymmetric edge chemistry induce the ordered alignment of dipoles, thereby enhancing directional transport. Velocity and density maps reveal that pore edges act as active zones, concentrating flow and reducing resistance. These findings highlight the significance of pore geometry, surface chemistry, and molecular dynamics in influencing water behavior within MoS$_{2}$ membranes, providing valuable insights for the design of advanced nanofluidic and water purification systems.