José Sebastián López Vélez
José Sebastián López Vélez has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Manuel Palencia
Research Group in Science with Technological Applications (GI-CAT), Department of Chemistry, Faculty of Natural and Exact Sciences, Universidad del Valle, Cali 760032, Colombia
3 shared publications - Pedro de Alcântara Pessôa Filho
Departamento de Engenharia Química, Escola Politécnica, Universidade de São Paulo (USP), Av. Prof. Luciano Gualberto, 380, São Paulo, São Paulo 05508-010, Brazil
2 shared publications - Adriano Rodrigues Azzoni
Departamento de Engenharia Química, Escola Politécnica, Universidade de São Paulo, São Paulo, Brazil
1 shared publication - Enrique Combatt-Caballero
Department of Agricultural Engineering and Rural Development, Faculty of Agricultural Sciences, Universidad de Córdoba, Monteria 230002, Colombia
1 shared publication Instituto de Pensamiento Complejo (Ipc)
1 shared publication- Izabela Dobrosz-Gómez
Universidad Nacional de Colombia
1 shared publication
Latest Publications
- Open Access
A Simple Method for Porous Structure Characterization of Ultrafiltration Membranes from Permeability Data and Hydrodynamic Models: A Semi-Empirical Approach
New approaches to the characterization of porous materials must satisfy principles of green analytical chemistry; in addition, they should be reproducible, versatile, and capable of providing relevant information for specific applications. Membrane characterization techniques often fail to meet some of these requirements. Specifically, hydrodynamic porous-based model methods (HPMMs) enable the simulation and evaluation of membrane properties, as well as the monitoring of changes in the response to controlled and uncontrolled modifications. Nevertheless, HPMMs are limited by the multifactorial relationships between their variables and by the generation of only single-value responses. Here, a semi-empirical approach to the characterization of membrane pore structure is proposed and evaluated using simple experimental measurements from pristine and modified membranes. The model enables the determination of the effective pore radius based on two size descriptors related to porosity and permeability, the construction of pore size distributions, and the estimation of structural parameters, such as the number of pores, pore size, and surface porosity. Furthermore, it allows for the simulation of Darcy-type flow behavior in both linear and nonlinear regimes. The model was evaluated on pristine and poly(vinyl alcohol)-modified poly(ethersulfone) ultrafiltration membranes (60–120 mmolL−1) by diafiltration (100–400 kPa). Results demonstrate the usefulness of the model in characterizing membrane pore structure by using simple, fast, and non-destructive methods, thereby enabling advances in analytical diafiltration for membrane characterization.
Open AccessA Simple Method for Porous Structure Characterization of Ultrafiltration Membranes from Permeability Data and Hydrodynamic Models: A Semi-Empirical Approach
New approaches to the characterization of porous materials must satisfy principles of green analytical chemistry; in addition, they should be reproducible, versatile, and capable of providing relevant information for specific applications. Membrane characterization techniques often fail to meet some of these requirements. Specifically, hydrodynamic porous-based model methods (HPMMs) enable the simulation and evaluation of membrane properties, as well as the monitoring of changes in the response to controlled and uncontrolled modifications. Nevertheless, HPMMs are limited by the multifactorial relationships between their variables and by the generation of only single-value responses. Here, a semi-empirical approach to the characterization of membrane pore structure is proposed and evaluated using simple experimental measurements from pristine and modified membranes. The model enables the determination of the effective pore radius based on two size descriptors related to porosity and permeability, the construction of pore size distributions, and the estimation of structural parameters, such as the number of pores, pore size, and surface porosity. Furthermore, it allows for the simulation of Darcy-type flow behavior in both linear and nonlinear regimes. The model was evaluated on pristine and poly(vinyl alcohol)-modified poly(ethersulfone) ultrafiltration membranes (60–120 mmolL−1) by diafiltration (100–400 kPa). Results demonstrate the usefulness of the model in characterizing membrane pore structure by using simple, fast, and non-destructive methods, thereby enabling advances in analytical diafiltration for membrane characterization.
- 1 May 2021
- Published by Mindtech S.A.S in Journal of Science with Technological Applications
- Vol. 10, 66-91
An approximation to mechanics and mass transport in polymer-based hydrogel systems
- 1 May 2021
- Published by Mindtech S.A.S in Journal of Science with Technological Applications
- Vol. 10, 66-91
An approximation to mechanics and mass transport in polymer-based hydrogel systems
- 26 July 2016
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 94 (12) , 2380-2385
Vapour‐liquid equilibrium and distillation scheme for the hydrochloric acid‐ethanol‐water ternary mixture
This work reports the Vapour‐Liquid Equilibrium (VLE) data, at 78 kPa, for a HCl‐ethanol‐water ternary mixture at low HCl content (x ≤ 0.137, which corresponds to HCl usual commercial form). The data were adjusted using the electrolyte‐NRTL activity model. The obtained predictions presented an absolute average deviation of 0.853 %. Next, this model was used to construct the residue curve map of the HCl‐ethanol‐water mixture. The analysis of its topology provided a fundamental understanding of the ternary mixture behaviour upon distillation process. Four different separation regions were identified. Finally, based on the residue curve map, a distillation column was designed to accomplish three design constraints: HCl‐water commercial product composition, maximum ethanol recovery for recycle, and minimum energetic duty in the reboiler.
- 26 July 2016
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 94 (12) , 2380-2385
Vapour‐liquid equilibrium and distillation scheme for the hydrochloric acid‐ethanol‐water ternary mixture
This work reports the Vapour‐Liquid Equilibrium (VLE) data, at 78 kPa, for a HCl‐ethanol‐water ternary mixture at low HCl content (x ≤ 0.137, which corresponds to HCl usual commercial form). The data were adjusted using the electrolyte‐NRTL activity model. The obtained predictions presented an absolute average deviation of 0.853 %. Next, this model was used to construct the residue curve map of the HCl‐ethanol‐water mixture. The analysis of its topology provided a fundamental understanding of the ternary mixture behaviour upon distillation process. Four different separation regions were identified. Finally, based on the residue curve map, a distillation column was designed to accomplish three design constraints: HCl‐water commercial product composition, maximum ethanol recovery for recycle, and minimum energetic duty in the reboiler.
- Open Access
- 1 February 2015
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (2) , 15722-15727
EQUILÍBRIO SÓLIDO-LÍQUIDO NA PRECIPITAÇÃO DE LISOZIMA COM SAIS BIODEGRADÁVEIS
A precipitação e a cristalização de proteínas são operações amplamente usadas na indústria biotecnológica. Em ambos os casos, a informação fundament...
- 1 February 2015
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (2) , 15722-15727
Open AccessEQUILÍBRIO SÓLIDO-LÍQUIDO NA PRECIPITAÇÃO DE LISOZIMA COM SAIS BIODEGRADÁVEIS
A precipitação e a cristalização de proteínas são operações amplamente usadas na indústria biotecnológica. Em ambos os casos, a informação fundament...