STSai-Wing Tsang

Sai-Wing Tsang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sai-Wing Tsang has a total of 476 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Efficient Hole Transport Layer‐Free Mixed Sn–Pb Perovskite Solar Cells and Photodetectors via In Situ Dipole Engineering

    by Hui Liu, Jisen Zhang, Wenqiang Ding, Yidan An, Miao Zhang, Songyang Yuan, Guanhua Ren, Ziyao Yue, Guangruixing Zou, Nan Zhang, et al.

    Mixed tin‐lead (Sn–Pb) perovskite solar cells (PSCs) have great potential for photovoltaics and infrared photodetector (PD) applications. However, their performance and reliability are severely limited by non‐radiative recombination, both within the perovskite bulk and at the interface between the perovskite and hole transporting layer (HTL). In HTL‐free architectures, the buried perovskite/ITO interface becomes the dominant extraction and recombination bottleneck, yet remains insufficiently engineered. Herein, we report an efficient HTL‐free mixed Sn–Pb optoelectronic device by introducing isoniazid (INH) into the perovskite film (FA 0.6 MA 0.3 Cs 0.1 Pb 0.5 Sn 0.5 I 3 ) to in situ form a dipole interface and establish a built‐in electric field, thereby suppressing the interface/bulk non‐radiative recombination and promoting hole extraction. The INH molecule can coordinate with Sn 2+ to modulate film crystallization, and the hydrazide group acts as a potent reducing agent, mitigating the Sn 2+ oxidation and passivating the defects. As a result, the optimized HTL‐free Sn–Pb PSCs achieved a champion power conversion efficiency (PCE) of 23.71%, with improved stability that retained 80% of their initial efficiency after 2250 h in an N 2 glovebox. Additionally, this strategy enabled high‐performance HTL‐free PDs with a remarkable specific detectivity beyond 10 14 Jones at 920 nm. This work provides a strategic pathway for developing efficient HTL‐free Sn–Pb perovskite optoelectronic devices.

  • Open Access

    Interface-Specific In Situ Photoluminescence Resolves Depth-Dependent Crystallization in Solution-Processed Metal Halide Perovskites

    by Sai Wing Tsang, Ziyao Yue, Yuanhang Cheng, Yunfan Wang

    Crystallization in solution-processed metal halide perovskites proceeds through an interplay among multiple precursor-derived species, including solvent molecules, ionic monomers, complexes, intermediate phases, and perovskite nuclei. Their abundance, composition, size, and stability govern crystal growth, defect formation, and film morphology. However, the spatially heterogeneous evolution of these species and their role in governing perovskite film quality remain insufficiently understood. Here, we investigate vertical crystallization heterogeneity in two prototypical methylammonium- and formamidinium-based perovskites using an in situ photoluminescence (PL) platform that selectively tracks crystallization at the film top surface and buried interface. We find that nucleation predominantly initiates earlier at the buried interface, whereas nuclei near the top surface exhibit faster transport and coarsening dynamics during crystal growth. In particular, we show that anti-solvent dripping can effectively trigger nucleation throughout the precursor film. Buried-interface nucleation is suppressed during high-quality film fabrication, suggesting that stabilizing buried-interface species is essential to minimize competing secondary nucleation and ensure unidirectional crystal growth. More broadly, this work demonstrates the capability of interface-specific in situ PL to resolve vertical crystallization heterogeneity, providing mechanistic insight and practical guidance for achieving high-quality perovskite thin films.

  • Organic n‐Type Molecule Mediated Crystallization Regulation for Sn‐Pb Perovskite Solar Cells

    by Tao Shen, Chengjian Yuan, Ziyao Yue, Jiarong Wang, Francis R. Lin, SaiWing Tsang, Alex K.‐Y. Jen

    Narrow‐bandgap Sn‐Pb perovskites have showcased great potential for constructing tandem perovskite solar cells (PSCs). However, Sn 2 + in Sn‐Pb PSCs is readily oxidized to Sn 4 + , and such B‐site Sn 4 + will introduce excess positive charge and causes severe p‐type self‐doping, which pins the Fermi level and aggravates non‐radiative recombination. Additionally, the Sn‐based component crystallizes far more rapidly than that of Pb, resulting in unbalanced Sn‐Pb crystallization. To address these challenges, we develop a novel n‐type molecule NDBH as perovskite additive. This molecule offers three key advantages: prevents the oxidation of Sn 2 + through chelation and blocks oxygen ingress along grain boundaries; balances the crystallization rates of Sn‐Pb perovskite by selectively chelating Sn 2 + ; modifies the perovskite surface to be more n‐type. With this organic n‐type molecule, the inverted Sn‐Pb PSCs achieve power conversion efficiency (PCE) of 24.11%. The devices also exhibited remarkable long‐term stability, retaining over 90% of their initial efficiency after 600 h of maximum power point (MPP) tracking. This approach of designing multifunctional n‐type molecules offers a new perspective for enhancing the efficiency and stability of Sn‐Pb PSCs.


  • Open Access

    Overcoming the fill-factor limit of organic solar cells

    by Huotian Zhang, Jun Yuan, Tong Wang, Yijie Nai, Nurlan Tokmoldin, Wei Liu, Shanchao Ouyang, Rokas Jasiūnas, Yiting Liu, Yuxuan Li, et al.

    Although organic solar cells have surpassed 20% power conversion efficiency, a persistent trade-off between open-circuit voltage and fill factor (FF) prevents them from closing the gap with inorganic technologies. Here we investigate this trade-off across a wide range of devices and identify an FF limit arising from field-dependent free-charge generation. This limit becomes more severe as voltage losses are minimized, thereby imposing an open-circuit voltage–FF trade-off. To quantitatively describe this limit, we develop an analytical model for field-dependent charge generation, revealing that the underlying cause is the field-sensitive charge-transfer process between excitons and charge-transfer states. This sensitivity originates from the field-induced charge-transfer state energy variations, mainly caused by the Stark effect. Guided by this physics-based model, we highlight that a long exciton lifetime is one of the practical and effective methods to overcome the FF limit.


  • Open Access

    Bio-inspired antioxidant stabilization for efficient tin-lead and all-perovskite tandem solar cells

    by Yiting Jiang, Tingfeng Lei, Chengda Ge, Yidan An, Nan Zhang, Yunfan Wang, Lingyi Ke, Zhiqiang Guan, Chun-To Wong, Danning Lyu, et al.

    The development of high-performance narrow-bandgap tin-lead (Sn-Pb) perovskite solar cells (PSCs) is fundamental to surpassing the Shockley-Queisser limit via all-perovskite tandem configurations. Nevertheless, the vulnerability of Sn2+ to oxidation in Sn-Pb perovskite films and devices remains a formidable obstacle to achieving superior film quality and competitive power conversion efficiency (PCE). Here, we introduce a bio-inspired antioxidant engineering strategy employing gallic acid (GA) as a dopant and tannic acid (TA) as a surface passivator to separately stabilize the perovskite bulk and interface. GA, a small antioxidant molecule, localizes at the grain boundaries to impart oxidation resistance and suppress the formation of excess SnI2 impurities. TA, with its larger molecular framework, resides at the film surface to form a robust passivation layer that hinders oxygen intrusion while establishing a dipole that facilitates interfacial charge transfer. The dual-molecule synergy significantly enhances film oxidative stability against both intrinsic (precursor degradation) and extrinsic (neutral oxygen and superoxide) stimuli. Consequently, the Sn-Pb PSCs achieve a champion PCE of 23.46%, enabling a remarkable 29.95% (certified 29.44%) efficiency in monolithic all-perovskite tandems.


  • Recycling of spin-triplet excitons in organic photovoltaics

    by Qian Li, Lingchen Kong, Le Mei, Shanchao Ouyang, Yiwen Ji, Baobing Fan, Huanhuan Gao, Wei Gao, Feng Qi, Zhiqiang Guan, et al.

    Non-geminate recombination in organic photovoltaics (OPVs) forms low-energy spin-triplet excitons (T1) that are known to result in irreversible, non-radiative relaxations1,2,3,4,5. Here we experimentally show in an OPV system incorporating a non-fullerene acceptor with a narrowed singlet–triplet gap that T1 excitons can be redissociated through the interfacial charge-transfer state to form free carriers. We corroborate this by identifying the increased population of free carriers following triplet sensitization of the acceptor in an OPV blend, and illustrate the way in which this mechanism alters the evolution of T1 and free carrier populations. We reveal how the distribution of orbitals in the molecule and exciton delocalization in aggregates affect the singlet–triplet energetics of the acceptor in the condensed phase, rendering the traffic between T1 and the spin-triplet charge-transfer state controllable. By introducing this acceptor as a ternary component into other host OPV systems, we manage to recover the triplet-mediated losses and improve OPV efficiencies by maximizing the number of extractable photocarriers. This study deepens our understanding of the fundamentals of OPVs, and shows how to develop future organic optoelectronics by demonstratating the recovery of low-energy T1 excitons into usable charges for electricity or light generation instead of heat.


  • Open Access

    Beyond rapid nucleation: unveiling the role of solvent–precursor interactions in antisolvent-free perovskite fabrication

    by Yunfan Wang, Weiren Zhao, Juncheng Wang, Zhuoqiong Zhang, Ziyao Yue, Yuxuan Zhang, Yiting Jiang, Zixin Zeng, Jie Zeng, Hainam Do, et al.

    Based on the machine learning-selected solvent, we successfully suppressed the fast crystallization of antisolvent-free perovskites fabricated at high ambient temperature and widened the temperature processing window.


  • Perovskite–organic tandem solar cells with superior reverse-bias stability

    by Jiaming Huang, Yu Han, Zhiwei Ren, Guang Yang, Yongmin Luo, Lei Cheng, Like Huang, Sudhi Mahadevan, Wei Song, Chujun Zhang, et al.

    The industrial deployment of thin-film solar cells faces challenges under reverse bias, particularly concerning perovskite materials with poor reverse-bias stability. Meanwhile, the reverse-bias characteristics of organic solar cells (OSCs) remain underexplored. This study first elucidates the mechanism that reverse tunnelling in OSCs, fundamentally dominated by deep trap state within a bulk heterojunction, triggering reversible/irreversible breakdowns under reverse bias. Building on this, we demonstrated high-performance OSCs with superior irreversible breakdown voltage exceeding –35 V by modulating the deep trap state through suppressing an isolated acceptor cluster in the donor–acceptor intermix region. Moreover, through strategically shielding perovskite by OSC with suppressed reverse tunnelling, n–i–p perovskite–organic tandem solar cells maintain over 90% of the initial efficiency when subjected to –40 V. These tandem devices retain 90% and 97% of the initial efficiency after stressing at –20 V for 12 h and –4.5 V for 2,000 h, respectively, outperforming all existing thin-film solar technologies. The exceptional reverse-bias stability under shadowing conditions was further demonstrated in scalable perovskite–organic tandem solar cell minimodules.


  • Toward a Robust ZnO Interface via Fullerene‐Based SAMs: Defect Passivation and Compatibility Tuning for High‐Performance Inverted Organic Solar Cells

    by Tian Xia, Qian Li, Kai‐Kai Liu, Shanchao Ouyang, Nan Zhang, Lingyi Ke, Gengxin Du, Yiting Jiang, Qi Liu, Haochen Liu, et al.

    The performance and operational stability of inverted organic solar cells (OSCs) are often limited by charge recombination and interfacial instability at the electron transport layer (ETL). To address this, we designed two fullerene‐based self‐assembled monolayers (SAMs)—C2‐PA and 4EG‐PA—as interfacial modifiers for zinc oxide (ZnO). Systematic comparisons reveal that the tetra(ethylene glycol) linker in 4EG‐PA induces a denser and more uniform SAM morphology than the alkyl chain in C2‐PA, which more effectively passivates the polar ZnO surface. This superior molecular packing translates into a champion power conversion efficiency of 19.46%. More critically, transient absorption spectroscopy (TAS) provides direct evidence that the 4EG‐PA‐modified interface facilitates the formation of a favorable charge‐transfer state, which not only promotes electron extraction but also enhances hole transfer efficiency from the acceptor to the donor, thereby suppressing non‐geminate recombination. Concurrently, the dense SAM acts as a robust buffer, improving the thermodynamic compatibility with the active layer and inhibiting its deleterious reaggregation. This dual mechanism—enhanced charge extraction and optimized interfacial morphology—underpins the exceptional operational stability, with devices retaining 84% of their initial performance after 2000 h. Our work elucidates the critical link between SAM molecular structure, interfacial properties, and device longevity, providing a strategic blueprint for future interfacial material design.


  • Open Access

    Localized 2D/3D heterojunction enhances photovoltage for perovskite-organic tandem solar cells

    by Mingqian Chen, Wenlin Jiang, Deng Wang, Lingchen Kong, Yanxun Li, Kai-Kai Liu, Yunfan Wang, Qian Li, Zhenhuang Su, Xiaofeng Huang, et al.

    Wide-bandgap perovskite solar cells are essential for constructing multi-junction solar cells; nevertheless, their achievable photovoltage is often limited by non-radiative recombination losses caused by defect states, mismatched energy levels, and poor contact at interfaces, resulting in a photovoltage plateau beyond 1.68 eV. Here, we explore intricate Lewis acid-base interactions between hole-selective self-assembled monolayer and ammonium ligands to engineer a localized 2D/3D perovskite heterojunction at the buried interface. This structure not only help reduce defect density but also facilitate charge extraction and templated perovskite crystallization without compromising the bulk optoelectrical properties of 3D perovskite. These resulted in 1.30, 1.38, and 1.42 V photovoltages for 1.68, 1.79, and 1.85 eV bandgap perovskite solar cells, respectively, all exceeding 90% of their thermodynamic limits. We also demonstrate high-efficiency monolithic tandem solar cells by integrating the optimized wide-bandgap perovskite solar cell with an organic subcell to achieve a PCE of 27.11% (certified 26.3%).