Stephen Clarke

The increasing demand for high-performance composites has driven the need for sustainable alternatives to conventional petroleum-based resins. This research introduces a novel glycerol-derived bio-epoxy resin and investigates the effect of catalyst concentration on its curing behaviour, network structure, and thermomechanical performance. Four catalyst concentrations were evaluated using differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and dynamic mechanical analysis (DMA) combined with tensile, flexural, and compression testing. DSC results revealed that increasing the catalyst concentration significantly lowered the curing activation energy, shifting the exothermic peak temperature from 194.8 °C to 145.2 °C. DMA revealed that the glass transition temperature (T_g), crosslinking density, and stiffness consistently increased up to an optimal catalyst concentration, reaching a maximum T_g of 109.0 °C. Further increases in catalyst content led to slight reductions in T_g and crosslink density due to the formation of a heterogeneous network. The optimal concentration enhanced tensile and compressive strength by 32.8% and 9.3%, respectively. At excessive catalyst concentration, strength properties deteriorated despite increased material rigidity. These findings confirm the critical role of catalyst in governing polymerisation kinetics and network structure, demonstrating that an optimal catalyst percentage is essential for maximising strength and durability, making the bio-epoxy a viable, high-performance alternative for advanced composite manufacturing.

This paper details Australian commercial and academic silicon research. Areas of interest include silicon metal, polysiloxane polymers, copolymers, cyclics, emulsions, microemulsions, silanes, silane coupling agents, sol‐gel chemistry and water‐treatments, porous silicon, polysiloxane degradation, silicon hydrogel contact lenses, silanolate synthesis, siloxane interfacial polymerisation, hydrosilylation, polysiloxane electrolytes for lithium ion batteries, silanes for PBX materials, octafunctionalized polyhedral oligomeric silsesquioxanes (POSS), POSS hybrids, sol‐gel hydrogenation catalysts, silane modification of silica, sol‐gel energy storage, silicate grout stabilisation, GeoPolymer concretes, aerogel insulating foams, “Phaco‐Ersatz” Accommodating Gel—Intraocular Lens technologies. Strong collaborative opportunities, in silicon, with Asia, exist with organisations such as: 1) The Asian Silicon Society and 2) The Agency for the Assessment and Application of Technology (BPPT) Indonesia.

The requirements of micronutrients for biomass and hydrocarbon production in Botryococcus braunii UTEX 572 were studied using response surface methodology. The concentrations of four micronutrients (iron, manganese, molybdenum, and nickel) were manipulated to achieve the best performance of B. braunii in laboratory conditions. The responses of algal biomass and hydrocarbon to the concentration variations of the four micronutrients were estimated by a second order quadratic regression model. Genetic algorithm calculations showed that the optimal level of micronutrients for algal biomass were 0.266 µM iron, 0.707 µM manganese, 0.624 µM molybdenum and 3.38 µM nickel. The maximum hydrocarbon content could be achieved when the culture media contained 10.43 µM iron, 6.53 µM manganese, 0.012 µM molybdenum and 1.73 µM nickel. The validation through an independent test in a photobioreactor suggests that the modified media with optimised concentrations of trace elements can increase algal biomass by 34.5% and hydrocarbon by 27.4%. This study indicates that micronutrients play significant roles in regulating algal growth and hydrocarbon production, and the response surface methodology can be used to optimise the composition of culture medium in algal culture.