Ardalan Vahidi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ardalan Vahidi has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Robert Austin Dollar
Department of Mechanical Engineering, Clemson University, Clemson, SC, USA
7 shared publications - Tyler Ard
Vehicle and Mobility Systems Department, Argonne National Laboratory, Lemont, IL, USA
7 shared publications Dominik Karbowski
Vehicle and Mobility Systems Department, Argonne National Laboratory, Lemont, IL, USA
5 shared publications- Jihun Han
Vehicle and Mobility Systems Department, Argonne National Laboratory, Lemont, IL, USA
4 shared publications - Yunyi Jia
Department of Automotive Engineering, Clemson University, Clemson, SC, USA
4 shared publications - Antonio Sciarretta
IFP Energies nouvelles
3 shared publications
Latest Publications
- Open Access
- 23 August 2026
- Published by Springer Nature in Public Transport
- p. 1-24
The effect of deployment and optimal dispatch of shared electric shuttles on the energy efficiency of campus transit
A problem that public transit systems are facing is low energy efficiency and the continued cycling of large transport vehicles at low occupancy when low demand for transport exists, wasting energy. To remedy this issue, we propose a hybrid system of existing diesel buses and automated electric shuttles to augment the system during off-peak hours. Due to their higher occupancy rates and more efficient powertrains, these shuttles could reduce the system energy used per traveled passenger mile. Automated electric shuttles can reduce the energy use of the public transit system further while still meeting ridership demands during low-demand times using optimized routes. These shuttles are considered on-demand. We will formulate and solve an optimization algorithm to optimally allocate the shuttles to requests based on predicted fuel use, predicted time cost, and the number of missed requests. By using traffic microsimulation software, the shuttles can travel along their optimized routes while being affected by transient traffic conditions. This method gives a better approximation of their real-world energy use. The microsimulation demonstrates that systems where buses operate during times of high demand and automated electric shuttles operate during times of low demand have lower energy use per traveled passenger mile and no missed requests. This hybrid system improves the energy used per traveled passenger mile by at least 32% when compared to the current system of buses. The hybrid system reduces both energy use and traveled passenger mile. The hybrid system also improves the total energy use by at least 64% compared to the current bus system.
- 23 August 2026
- Published by Springer Nature in Public Transport
- p. 1-24
Open AccessThe effect of deployment and optimal dispatch of shared electric shuttles on the energy efficiency of campus transit
A problem that public transit systems are facing is low energy efficiency and the continued cycling of large transport vehicles at low occupancy when low demand for transport exists, wasting energy. To remedy this issue, we propose a hybrid system of existing diesel buses and automated electric shuttles to augment the system during off-peak hours. Due to their higher occupancy rates and more efficient powertrains, these shuttles could reduce the system energy used per traveled passenger mile. Automated electric shuttles can reduce the energy use of the public transit system further while still meeting ridership demands during low-demand times using optimized routes. These shuttles are considered on-demand. We will formulate and solve an optimization algorithm to optimally allocate the shuttles to requests based on predicted fuel use, predicted time cost, and the number of missed requests. By using traffic microsimulation software, the shuttles can travel along their optimized routes while being affected by transient traffic conditions. This method gives a better approximation of their real-world energy use. The microsimulation demonstrates that systems where buses operate during times of high demand and automated electric shuttles operate during times of low demand have lower energy use per traveled passenger mile and no missed requests. This hybrid system improves the energy used per traveled passenger mile by at least 32% when compared to the current system of buses. The hybrid system reduces both energy use and traveled passenger mile. The hybrid system also improves the total energy use by at least 64% compared to the current bus system.
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 27 (7) , 7936-7949
MR-HVIL: A Mixed-Reality-Based Human--Vehicle-In-the-Loop On-Road Validation Platform for Mixed Traffic Testing
This paper introduces MR-HVIL, a novel mixed-reality-based platform designed for on-road human-vehicle-in-the-loop validation in vehicle research. MR-HVIL leverages an optical see-through mixed reality framework to seamlessly integrate real-world driving environments with virtual traffic scenarios. Unlike traditional vehicle-in-the-loop and driving simulators, our platform enhances driver experience by combining real-world physical vehicle dynamic motions with optimized virtual content overlay, ensuring a realistic and immersive validation environment. To address the challenges of synchronization and localization in outdoor environments, we develop a real-time virtual object localization and correction algorithm that integrates vehicle sensor data, enhancing mixed reality accuracy and stability. Experimental validation demonstrates the platform’s efficacy in comparing human responses to real and virtual autonomous vehicles, offering new opportunities for human-centric validation in mixed traffic scenarios. MR-HVIL paves the way for safer, more versatile, and naturalistic testing of mixed traffic systems.
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 27 (7) , 7936-7949
MR-HVIL: A Mixed-Reality-Based Human--Vehicle-In-the-Loop On-Road Validation Platform for Mixed Traffic Testing
This paper introduces MR-HVIL, a novel mixed-reality-based platform designed for on-road human-vehicle-in-the-loop validation in vehicle research. MR-HVIL leverages an optical see-through mixed reality framework to seamlessly integrate real-world driving environments with virtual traffic scenarios. Unlike traditional vehicle-in-the-loop and driving simulators, our platform enhances driver experience by combining real-world physical vehicle dynamic motions with optimized virtual content overlay, ensuring a realistic and immersive validation environment. To address the challenges of synchronization and localization in outdoor environments, we develop a real-time virtual object localization and correction algorithm that integrates vehicle sensor data, enhancing mixed reality accuracy and stability. Experimental validation demonstrates the platform’s efficacy in comparing human responses to real and virtual autonomous vehicles, offering new opportunities for human-centric validation in mixed traffic scenarios. MR-HVIL paves the way for safer, more versatile, and naturalistic testing of mixed traffic systems.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 1549-1554
Optimal Eco-Driving Control for Electric Vehicles: Energy Savings Analysis and Experimental Study
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 1549-1554
Optimal Eco-Driving Control for Electric Vehicles: Energy Savings Analysis and Experimental Study
- 5 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 9, 9-14
Energy-Efficient Automated Driving for Everyday Maneuvers: Fundamentals to Experimentation
Energy-efficient driving is a key advancement in the deployment of automated vehicles once safety concerns are addressed. This paper formulates the energy-efficient driving problem with constraints and explores various solution methods for common driving scenarios. The findings, rooted in theory of optimal control and Pontryagin’s Minimum Principle (PMP), offer fundamental insights into energy-efficient driving strategies in every-day driving scenarios. Analytical insights from PMP, coupled with fast analytical solution of the respective boundary value problem, enabled implementation in a real-time control system and near-optimal energy savings. The proposed approach was validated through real vehicle testing on the track, with results demonstrating that automated eco-driving can achieve significant energy savings over human drivers in basic daily driving scenarios. This study not only highlights the effectiveness of the proposed approach but also provides practical guidance for integrating energy-efficient driving strategies into real-world automated driving and advanced driver assistance systems.
- 5 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 9, 9-14
Energy-Efficient Automated Driving for Everyday Maneuvers: Fundamentals to Experimentation
Energy-efficient driving is a key advancement in the deployment of automated vehicles once safety concerns are addressed. This paper formulates the energy-efficient driving problem with constraints and explores various solution methods for common driving scenarios. The findings, rooted in theory of optimal control and Pontryagin’s Minimum Principle (PMP), offer fundamental insights into energy-efficient driving strategies in every-day driving scenarios. Analytical insights from PMP, coupled with fast analytical solution of the respective boundary value problem, enabled implementation in a real-time control system and near-optimal energy savings. The proposed approach was validated through real vehicle testing on the track, with results demonstrating that automated eco-driving can achieve significant energy savings over human drivers in basic daily driving scenarios. This study not only highlights the effectiveness of the proposed approach but also provides practical guidance for integrating energy-efficient driving strategies into real-world automated driving and advanced driver assistance systems.
- 31 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 33 (4) , 1246-1257
Automated Lane Change via Adaptive Interactive MPC: Human-in-the-Loop Experiments
This article presents a new optimal control-based interactive motion planning algorithm for an autonomous vehicle interacting with a human-driven vehicle. The ego vehicle solves a joint optimization problem for its motion planning involving costs and coupled constraints of both vehicles and applies its own actions. The nonconvex feasible region and lane discipline are handled by introducing integer decision variables and the resulting optimization problem is a mixed-integer quadratic program (MIQP) which is implemented via model predictive control (MPC). Furthermore, the ego vehicle imputes the cost of human-driven neighboring vehicle (NV) using an inverse optimal control method based on Karush-Kuhn–Tucker (KKT) conditions and adapts the joint optimization cost accordingly. We call the algorithm adaptive interactive mixed-integer MPC (aiMPC). Its interaction with human subjects driving the NV in a mandatory lane change (MLC) scenario is tested in a developed software-and-human-in-the-loop simulator. Results show the effectiveness of the presented algorithm in terms of enhanced mobility of both vehicles compared to baseline methods.
- 31 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 33 (4) , 1246-1257
Automated Lane Change via Adaptive Interactive MPC: Human-in-the-Loop Experiments
This article presents a new optimal control-based interactive motion planning algorithm for an autonomous vehicle interacting with a human-driven vehicle. The ego vehicle solves a joint optimization problem for its motion planning involving costs and coupled constraints of both vehicles and applies its own actions. The nonconvex feasible region and lane discipline are handled by introducing integer decision variables and the resulting optimization problem is a mixed-integer quadratic program (MIQP) which is implemented via model predictive control (MPC). Furthermore, the ego vehicle imputes the cost of human-driven neighboring vehicle (NV) using an inverse optimal control method based on Karush-Kuhn–Tucker (KKT) conditions and adapts the joint optimization cost accordingly. We call the algorithm adaptive interactive mixed-integer MPC (aiMPC). Its interaction with human subjects driving the NV in a mandatory lane change (MLC) scenario is tested in a developed software-and-human-in-the-loop simulator. Results show the effectiveness of the presented algorithm in terms of enhanced mobility of both vehicles compared to baseline methods.
- 1 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (4) , 214-256
Efficient Driving with Automated and Connected Vehicles Algorithms, Microsimulations, and Cyber-Physical Experiments
The shift that we are witnessing toward automated, connected, electric, and shared vehicular transportation is likely to be the most disruptive since the early days of automobiles. Improved safety, increased comfort, and time saving potential are among the most anticipated positive impacts of automated and connected vehicles. With much easier access to information, increased processing power, and precision control, automated and connected vehicles also offer unprecedented opportunities for energy efficient movement of people and goods and enable more efficient road use. This talk takes a closer look at the energy saving and traffic efficiency potentials of automated and connected vehicles based on first principles of motion, optimal control theory, and practical examples from our past and ongoing research. For instance, the talk shows through experiments on streets of San Francisco, that considerable energy can be saved by coordinated movement at traffic lights. In highway driving, our optimal motion planning algorithms that adjust the speed and select the best lane via mixed integer optimization, save energy by anticipating the motion of human drivers or by wirelessly receiving the intentions of neighboring automated vehicles. Energy efficient motion of these automated vehicles has a harmonizing effect on mixed traffic, leading to additional benefits for upstream human-driven vehicles. Opportunities for cooperative driving further increases efficiency of a group of vehicles by allowing them to move in a coordinated manner. In this talk, these benefits are shown in mixed traffic microsimulations, as well as shown in a novel cyber-physical experiment with virtual traffic surrounding real automated vehicles on a test track. Throughout the talk the gaps and future research directions are also highlighted.
- 1 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (4) , 214-256
Efficient Driving with Automated and Connected Vehicles Algorithms, Microsimulations, and Cyber-Physical Experiments
The shift that we are witnessing toward automated, connected, electric, and shared vehicular transportation is likely to be the most disruptive since the early days of automobiles. Improved safety, increased comfort, and time saving potential are among the most anticipated positive impacts of automated and connected vehicles. With much easier access to information, increased processing power, and precision control, automated and connected vehicles also offer unprecedented opportunities for energy efficient movement of people and goods and enable more efficient road use. This talk takes a closer look at the energy saving and traffic efficiency potentials of automated and connected vehicles based on first principles of motion, optimal control theory, and practical examples from our past and ongoing research. For instance, the talk shows through experiments on streets of San Francisco, that considerable energy can be saved by coordinated movement at traffic lights. In highway driving, our optimal motion planning algorithms that adjust the speed and select the best lane via mixed integer optimization, save energy by anticipating the motion of human drivers or by wirelessly receiving the intentions of neighboring automated vehicles. Energy efficient motion of these automated vehicles has a harmonizing effect on mixed traffic, leading to additional benefits for upstream human-driven vehicles. Opportunities for cooperative driving further increases efficiency of a group of vehicles by allowing them to move in a coordinated manner. In this talk, these benefits are shown in mixed traffic microsimulations, as well as shown in a novel cyber-physical experiment with virtual traffic surrounding real automated vehicles on a test track. Throughout the talk the gaps and future research directions are also highlighted.
- 31 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 9 (1) , 944-957
Energy-Efficient Reactive and Predictive Connected Cruise Control
Connected and automated vehicles (CAVs) have shown great potential in improving the energy efficiency of road transportation. Energy savings, however, greatly depends on driving behavior. Therefore, the controllers of CAVs must be carefully designed to fully leverage the benefits of connectivity and automation, especially if CAVs travel amongst other non-connected and human-driven vehicles. With this as motivation, we introduce a framework for the longitudinal control of CAVs traveling in mixed traffic including connected and non-connected human-driven vehicles. Reactive and predictive connected cruise control strategies are proposed. Reactive controllers are given by explicit feedback control laws. Predictive controllers, on the other hand, optimize the control input in a receding-horizon fashion, by predicting the motions of preceding vehicles. Beyond-line-of-sight information obtained via vehicle-to-vehicle (V2V) communication is leveraged by the proposed reactive and predictive controllers. Simulations utilizing real traffic data show that connectivity can bring up to $30\%$ energy savings in certain scenarios.
- 31 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 9 (1) , 944-957
Energy-Efficient Reactive and Predictive Connected Cruise Control
Connected and automated vehicles (CAVs) have shown great potential in improving the energy efficiency of road transportation. Energy savings, however, greatly depends on driving behavior. Therefore, the controllers of CAVs must be carefully designed to fully leverage the benefits of connectivity and automation, especially if CAVs travel amongst other non-connected and human-driven vehicles. With this as motivation, we introduce a framework for the longitudinal control of CAVs traveling in mixed traffic including connected and non-connected human-driven vehicles. Reactive and predictive connected cruise control strategies are proposed. Reactive controllers are given by explicit feedback control laws. Predictive controllers, on the other hand, optimize the control input in a receding-horizon fashion, by predicting the motions of preceding vehicles. Beyond-line-of-sight information obtained via vehicle-to-vehicle (V2V) communication is leveraged by the proposed reactive and predictive controllers. Simulations utilizing real traffic data show that connectivity can bring up to $30\%$ energy savings in certain scenarios.
- 6 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 8 (6) , 3556-3571
Level-$K$ Reasoning, Deep Reinforcement Learning, and Monte Carlo Decision Process for Fast and Safe Automated Lane Change and Speed Management
This paper presents a decision process model for real-time automated lane change and speed management in highway traffic. The presented algorithm is developed based on level- $K$ game theory to model and predict the interaction between the vehicles. Using deep reinforcement learning, this algorithm encodes and memorizes the past experiences that are recurrently used to reduce the computations and speed up motion planning. Also, we use Monte Carlo Tree Search (MCTS) as an effective tool that is employed nowadays for fast planning in complex and dynamic game environments. This development leverages the computation power efficiently and showcases promising outcomes for maneuver planning and predicting the environment's dynamics. In the absence of traffic connectivity that may be due to either passenger's choice of privacy or the vehicle's lack of technology, this development can be extended and employed in fully-automated vehicles for real-world and practical applications.
- 6 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 8 (6) , 3556-3571
Level-$K$ Reasoning, Deep Reinforcement Learning, and Monte Carlo Decision Process for Fast and Safe Automated Lane Change and Speed Management
This paper presents a decision process model for real-time automated lane change and speed management in highway traffic. The presented algorithm is developed based on level- $K$ game theory to model and predict the interaction between the vehicles. Using deep reinforcement learning, this algorithm encodes and memorizes the past experiences that are recurrently used to reduce the computations and speed up motion planning. Also, we use Monte Carlo Tree Search (MCTS) as an effective tool that is employed nowadays for fast planning in complex and dynamic game environments. This development leverages the computation power efficiently and showcases promising outcomes for maneuver planning and predicting the environment's dynamics. In the absence of traffic connectivity that may be due to either passenger's choice of privacy or the vehicle's lack of technology, this development can be extended and employed in fully-automated vehicles for real-world and practical applications.
- 4 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 8 (2) , 1279-1291
Energy-Efficient Driving in Connected Corridors via Minimum Principle Control: Vehicle-in-the-Loop Experimental Verification in Mixed Fleets
Connected and automated vehicles (CAVs) can plan and actuate control that explicitly considers performance, system safety, and actuation constraints in a manner more efficient than their human-driven counterparts. In particular, eco-driving is enabled through connected exchange of information from signalized corridors that share their upcoming signal phase and timing (SPaT). This is accomplished in the proposed control approach, which follows first principles to plan a free-flow acceleration-optimal trajectory through green traffic light intervals by Pontryagin's Minimum Principle in a feedback manner. Urban conditions are then imposed from exogeneous traffic comprised of a mixture of human-driven vehicles (HVs) - as well as other CAVs. As such, safe disturbance compensation is achieved by implementing a model predictive controller (MPC) to anticipate and avoid collisions by issuing braking commands as necessary. The control strategy is experimentally vetted through vehicle-in-the-loop (VIL) of a prototype CAV that is embedded into a virtual traffic corridor realized through microsimulation. Up to 36% fuel savings are measured with the proposed control approach over a human-modelled driver, and it was found connectivity in the automation approach improved fuel economy by up to 26% over automation without. Additionally, the passive energy benefits realizable for human drivers when driving behind downstream CAVs are measured, showing up to 22% fuel savings in a HV when driving behind a small penetration of connectivity-enabled automated vehicles.
- 4 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 8 (2) , 1279-1291
Energy-Efficient Driving in Connected Corridors via Minimum Principle Control: Vehicle-in-the-Loop Experimental Verification in Mixed Fleets
Connected and automated vehicles (CAVs) can plan and actuate control that explicitly considers performance, system safety, and actuation constraints in a manner more efficient than their human-driven counterparts. In particular, eco-driving is enabled through connected exchange of information from signalized corridors that share their upcoming signal phase and timing (SPaT). This is accomplished in the proposed control approach, which follows first principles to plan a free-flow acceleration-optimal trajectory through green traffic light intervals by Pontryagin's Minimum Principle in a feedback manner. Urban conditions are then imposed from exogeneous traffic comprised of a mixture of human-driven vehicles (HVs) - as well as other CAVs. As such, safe disturbance compensation is achieved by implementing a model predictive controller (MPC) to anticipate and avoid collisions by issuing braking commands as necessary. The control strategy is experimentally vetted through vehicle-in-the-loop (VIL) of a prototype CAV that is embedded into a virtual traffic corridor realized through microsimulation. Up to 36% fuel savings are measured with the proposed control approach over a human-modelled driver, and it was found connectivity in the automation approach improved fuel economy by up to 26% over automation without. Additionally, the passive energy benefits realizable for human drivers when driving behind downstream CAVs are measured, showing up to 22% fuel savings in a HV when driving behind a small penetration of connectivity-enabled automated vehicles.