Levi DeVries
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Levi DeVries has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Michael D. M. Kutzer
Department of Weapons, Robotics, & Control Engineering, United States Naval Academy, Annapolis, USA
5 shared publications - Donald H. Costello
MATRIX Laboratory, A. James Clark School of Engineering, University of Maryland, College Park, MD, USA
2 shared publications - Jeremy J. Dawkins
Weapons, Robotics, and Control Engineering Department, United States Naval Academy, 105 Maryland Ave., Annapolis, MD 21402, USA
2 shared publications - Aaron Sims
Department of Weapons and Systems Engineering, United States Naval Academy, Annapolis, Maryland, 21402, USA. s:
1 shared publication - Archie Bass
Department of Weapons, Robotics, and Control Engineering, United States Naval Academy, Annapolis, MD 21402
1 shared publication - Benjamin Ross
Weapons, Robotics and Control Engineering, United States Naval Academy, Annapolis, USA
1 shared publication
Latest Publications
- Open Access
- 2 April 2025
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 111 (2) , 1-17
Uncertainty Informed Position Estimation Using Multi-view Cameras
Systems today rely heavily on sensor feed to inform an accurate operating picture. In the specific context of mobile robots and aerial assets, the integrity of this information has strong implications on risk assessment and safety. This work focuses specifically on uncertainty-aware data fusion applications in vision-driven tracking algorithms, with potential applications for various sensor modalities. We present a novel method for quantifying the component level uncertainty of parameters involved in solving the multi-view position recovery problem. Component-level uncertainty is quantified experimentally by comparing sensor data to ground truth measurements. Monte Carlo methods are used to simulate the propagation of uncertainty through the system, and predictions are presented in the form of a dense point cloud. The density and distribution of the resultant point clouds are used to approximate volumetric confidence intervals. System performance is evaluated and compared at different distance intervals, simulating expected performance as a system approaches a target.
- 2 April 2025
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 111 (2) , 1-17
Open AccessUncertainty Informed Position Estimation Using Multi-view Cameras
Systems today rely heavily on sensor feed to inform an accurate operating picture. In the specific context of mobile robots and aerial assets, the integrity of this information has strong implications on risk assessment and safety. This work focuses specifically on uncertainty-aware data fusion applications in vision-driven tracking algorithms, with potential applications for various sensor modalities. We present a novel method for quantifying the component level uncertainty of parameters involved in solving the multi-view position recovery problem. Component-level uncertainty is quantified experimentally by comparing sensor data to ground truth measurements. Monte Carlo methods are used to simulate the propagation of uncertainty through the system, and predictions are presented in the form of a dense point cloud. The density and distribution of the resultant point clouds are used to approximate volumetric confidence intervals. System performance is evaluated and compared at different distance intervals, simulating expected performance as a system approaches a target.
- 15 July 2024
- Published by Springer Nature in Journal of Ocean Engineering and Marine Energy
- Vol. 10 (4) , 691-710
Modeling, system identification, and friction compensation of an actuator system for heave and surge wave energy converter experiments
- 15 July 2024
- Published by Springer Nature in Journal of Ocean Engineering and Marine Energy
- Vol. 10 (4) , 691-710
Modeling, system identification, and friction compensation of an actuator system for heave and surge wave energy converter experiments
- 26 October 2023
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 109 (3) , 1-12
DNN Based Ranging in Support of Autonomous Aerial Refueling
- 26 October 2023
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 109 (3) , 1-12
DNN Based Ranging in Support of Autonomous Aerial Refueling
- 22 October 2019
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 12 (1) , 1-13
Hull Shape Actuation for Speed Regulation in an Underwater Vehicle
Autonomous underwater vehicles (AUVs) have shown great promise in fulfilling surveillance, scavenging, and monitoring tasks. Traditional gliders and streamlined AUVs are designed for long-term operational efficiency in expansive environments but are limited in cluttered spaces due to their shape and control authority; agile AUVs can penetrate cluttered or sensitive environments but are limited in operational endurance at large spatial scales. This paper presents the dynamic modeling and control design of an underwater hull capable of actuating its shape morphology. The prototype hull incorporates flexible, buckled fiberglass ribs to ensure a rigid shape that is actuated by modulating the length of the body’s semi-major axis. We represent the vehicle shape using a single control input actuating the vehicle’s length-to-diameter ratio. Hydrodynamic modeling of the flexible hull suggests that dynamic shape actuation can modulate the mass and drag properties of the hull to improve control of the vehicle’s forward speed. Using tools from nonlinear control theory, this paper presents the derivation of a shape-actuating autonomous control algorithm regulating the vehicle speed to a time-varying reference speed, subject to the actuator limits. The theoretical control results are illustrated using numerical simulations of the vehicle model.
- 22 October 2019
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 12 (1) , 1-13
Hull Shape Actuation for Speed Regulation in an Underwater Vehicle
Autonomous underwater vehicles (AUVs) have shown great promise in fulfilling surveillance, scavenging, and monitoring tasks. Traditional gliders and streamlined AUVs are designed for long-term operational efficiency in expansive environments but are limited in cluttered spaces due to their shape and control authority; agile AUVs can penetrate cluttered or sensitive environments but are limited in operational endurance at large spatial scales. This paper presents the dynamic modeling and control design of an underwater hull capable of actuating its shape morphology. The prototype hull incorporates flexible, buckled fiberglass ribs to ensure a rigid shape that is actuated by modulating the length of the body’s semi-major axis. We represent the vehicle shape using a single control input actuating the vehicle’s length-to-diameter ratio. Hydrodynamic modeling of the flexible hull suggests that dynamic shape actuation can modulate the mass and drag properties of the hull to improve control of the vehicle’s forward speed. Using tools from nonlinear control theory, this paper presents the derivation of a shape-actuating autonomous control algorithm regulating the vehicle speed to a time-varying reference speed, subject to the actuator limits. The theoretical control results are illustrated using numerical simulations of the vehicle model.
- Open Access
Persistent Multi-Agent Search and Tracking with Flight Endurance Constraints
A large group of small, limited endurance autonomous vehicles working cooperatively may be more effective in target search and track operations when compared with a long endurance vehicle. For a persistent search and track task, a need exists for coordination algorithms that account for limited agent endurance. This paper presents a multi-agent persistent search and track algorithm incorporating endurance constraints in a high-level algorithm that deploys and recovers vehicles from a stationary base station. Agents are assigned to search, track, return, and deploy modes using on-board sensor and battery measurements. Simulations and experiments show the relationship between the number of agents, battery capacity, search performance, and target tracking performance. The measures used to quantify these relationships include spatiotemporal coverage, target tracking effectiveness, and the usage of available aircraft. Hardware experiments demonstrate the effectiveness of the approach.
Open AccessPersistent Multi-Agent Search and Tracking with Flight Endurance Constraints
A large group of small, limited endurance autonomous vehicles working cooperatively may be more effective in target search and track operations when compared with a long endurance vehicle. For a persistent search and track task, a need exists for coordination algorithms that account for limited agent endurance. This paper presents a multi-agent persistent search and track algorithm incorporating endurance constraints in a high-level algorithm that deploys and recovers vehicles from a stationary base station. Agents are assigned to search, track, return, and deploy modes using on-board sensor and battery measurements. Simulations and experiments show the relationship between the number of agents, battery capacity, search performance, and target tracking performance. The measures used to quantify these relationships include spatiotemporal coverage, target tracking effectiveness, and the usage of available aircraft. Hardware experiments demonstrate the effectiveness of the approach.
- Open Access
Modeling, Trim Analysis, and Trajectory Control of a Micro-Quadrotor with Wings
This paper presents the modeling, control design, and efficiency analysis of a micro-quadrotor aerial vehicle with airfoils. We derive the equations of motion for a micro-quadrotor (length 0.15 m and mass 0.03 kg) outfitted with two symmetric airfoils that generate lift during forward transit. A trim analysis is presented to determine nominal flight conditions. Analysis of the model facilitates design of a controller that stabilizes the modified quadrotor through transitions from hover to forward fixed-wing flight. The performance of the design and control approach is analyzed through a series of typical flight profile simulations. The controller is able to track a velocity trajectory in the presence of aerodynamic uncertainties. The simulations are also used to determine the efficiency of the aircraft compared to a standard quadrotor. Results suggest that, during forward flight, the airfoils result in up to a 35% energy savings depending on the aspect ratio and forward speed of the vehicle. Added airfoil weight, however, causes a 45% energy loss during hover. These results indicate that the neutral benefit speed is in the range 3–5 m/s depending on the aspect ratio of the airfoil, which is suggestive of mission flight profiles that best utilize the added benefit of airfoils on a micro-quadrotor.
Open AccessModeling, Trim Analysis, and Trajectory Control of a Micro-Quadrotor with Wings
This paper presents the modeling, control design, and efficiency analysis of a micro-quadrotor aerial vehicle with airfoils. We derive the equations of motion for a micro-quadrotor (length 0.15 m and mass 0.03 kg) outfitted with two symmetric airfoils that generate lift during forward transit. A trim analysis is presented to determine nominal flight conditions. Analysis of the model facilitates design of a controller that stabilizes the modified quadrotor through transitions from hover to forward fixed-wing flight. The performance of the design and control approach is analyzed through a series of typical flight profile simulations. The controller is able to track a velocity trajectory in the presence of aerodynamic uncertainties. The simulations are also used to determine the efficiency of the aircraft compared to a standard quadrotor. Results suggest that, during forward flight, the airfoils result in up to a 35% energy savings depending on the aspect ratio and forward speed of the vehicle. Added airfoil weight, however, causes a 45% energy loss during hover. These results indicate that the neutral benefit speed is in the range 3–5 m/s depending on the aspect ratio of the airfoil, which is suggestive of mission flight profiles that best utilize the added benefit of airfoils on a micro-quadrotor.
- 27 March 2018
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 36 (7) , 1077-1097
Kernel Design and Distributed, Self-Triggered Control for Coordination of Autonomous Multi-Agent Configurations
SUMMARY: Autonomous multi-agent systems show promise in countless applications, but can be hindered in environments where inter-agent communication is limited. In such cases, this paper considers a scenario where agents communicate intermittently through a cloud server. We derive a graph transformation mapping the kernel of a graph's Laplacian to a desired configuration vector while retaining graph topology characteristics. The transformation facilitates derivation of a self-triggered controller driving agents to prescribed configurations while regulating instances of inter-agent communication. Experimental validation of the theoretical results shows the self-triggered approach drives agents to a desired configuration using fewer control updates than traditional periodic implementations.
- 27 March 2018
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 36 (7) , 1077-1097
Kernel Design and Distributed, Self-Triggered Control for Coordination of Autonomous Multi-Agent Configurations
SUMMARY: Autonomous multi-agent systems show promise in countless applications, but can be hindered in environments where inter-agent communication is limited. In such cases, this paper considers a scenario where agents communicate intermittently through a cloud server. We derive a graph transformation mapping the kernel of a graph's Laplacian to a desired configuration vector while retaining graph topology characteristics. The transformation facilitates derivation of a self-triggered controller driving agents to prescribed configurations while regulating instances of inter-agent communication. Experimental validation of the theoretical results shows the self-triggered approach drives agents to a desired configuration using fewer control updates than traditional periodic implementations.
- Open Access
- 24 May 2017
- Published by MDPI AG in Technologies
- Vol. 5 (2) , 25
Testbed for Multilayer Conformal Additive Manufacturing
Over the last two decades, additive manufacturing (AM) or 3D printing technologies have become pervasive in both the public and private sectors. Despite this growth, there has been little to no deviation from the fundamental approach of building parts using planar layers. This undue reliance on a flat build surface limits part geometry and performance. To address these limitations, a new method of applying material onto or around existing surfaces with multilayer, thick features will be explored. Prior work proposes algorithms for defining conformal layers between existing and desired surfaces, however this work does not address the derivation of deposition paths, trajectories, or required hardware to achieve this new type of deposition. This paper presents (1) the derivation of deposition paths given a prescribed set of layers; (2) the design, characterization, and control of a proof-of-concept testbed; and (3) the derivation and application of time evolving trajectories subject to the material deposition constraints and mechanical constraints of the testbed. Derivations are presented in a general context with examples extending beyond the proposed testbed. Results show the feasibility of conformal material deposition (i.e., onto and around existing surfaces) with multilayer, thick features.
- 24 May 2017
- Published by MDPI AG in Technologies
- Vol. 5 (2) , 25
Open AccessTestbed for Multilayer Conformal Additive Manufacturing
Over the last two decades, additive manufacturing (AM) or 3D printing technologies have become pervasive in both the public and private sectors. Despite this growth, there has been little to no deviation from the fundamental approach of building parts using planar layers. This undue reliance on a flat build surface limits part geometry and performance. To address these limitations, a new method of applying material onto or around existing surfaces with multilayer, thick features will be explored. Prior work proposes algorithms for defining conformal layers between existing and desired surfaces, however this work does not address the derivation of deposition paths, trajectories, or required hardware to achieve this new type of deposition. This paper presents (1) the derivation of deposition paths given a prescribed set of layers; (2) the design, characterization, and control of a proof-of-concept testbed; and (3) the derivation and application of time evolving trajectories subject to the material deposition constraints and mechanical constraints of the testbed. Derivations are presented in a general context with examples extending beyond the proposed testbed. Results show the feasibility of conformal material deposition (i.e., onto and around existing surfaces) with multilayer, thick features.
- 1 January 2016
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Guidance, Control, and Dynamics
- Vol. 39 (1) , 32-41
Wake Sensing and Estimation for Control of Autonomous Aircraft in Formation Flight
The continued development of sophisticated aircraft with high-fidelity control systems will enable autonomous execution of challenging tasks such as aerial refueling and close-formation flight. To achieve such tasks autonomously, an aircraft must sense other aircraft in close proximity and position itself relative to them. For example, formation-flying aircraft must position themselves strategically to realize benefits of aerodynamic efficiency; aerial refueling requires the follower aircraft to intercept the filling nozzle attached to the leader aircraft. This paper uses lifting-line theory to represent a two-aircraft formation and presents a grid-based, recursive Bayesian filter for estimating the wake parameters of the lead aircraft using noisy pressure measurements distributed along the trailing aircraft’s wing; the estimator also uses a binary, relative-altitude measurement to break the vertical symmetry. The paper employs measures of observability to quantify spatial regions prone to degraded estimation performance. Optimal control strategies are presented to steer the follower aircraft to a desired lateral position relative to the leader while simultaneously optimizing the observability of the leader’s relative position. The control algorithms guide the follower aircraft along trajectories that maintain adequate observability, thereby guaranteeing estimator performance. Theoretical results are illustrated using numerical examples of a two-aircraft formation.
- 1 January 2016
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Guidance, Control, and Dynamics
- Vol. 39 (1) , 32-41
Wake Sensing and Estimation for Control of Autonomous Aircraft in Formation Flight
The continued development of sophisticated aircraft with high-fidelity control systems will enable autonomous execution of challenging tasks such as aerial refueling and close-formation flight. To achieve such tasks autonomously, an aircraft must sense other aircraft in close proximity and position itself relative to them. For example, formation-flying aircraft must position themselves strategically to realize benefits of aerodynamic efficiency; aerial refueling requires the follower aircraft to intercept the filling nozzle attached to the leader aircraft. This paper uses lifting-line theory to represent a two-aircraft formation and presents a grid-based, recursive Bayesian filter for estimating the wake parameters of the lead aircraft using noisy pressure measurements distributed along the trailing aircraft’s wing; the estimator also uses a binary, relative-altitude measurement to break the vertical symmetry. The paper employs measures of observability to quantify spatial regions prone to degraded estimation performance. Optimal control strategies are presented to steer the follower aircraft to a desired lateral position relative to the leader while simultaneously optimizing the observability of the leader’s relative position. The control algorithms guide the follower aircraft along trajectories that maintain adequate observability, thereby guaranteeing estimator performance. Theoretical results are illustrated using numerical examples of a two-aircraft formation.