Hongsheng Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hongsheng Lu has a total of 184 co-authors. Here are the top co-authors by number of shared publications:
Jie Qi
College of Chemistry and Chemical Engineering
23 shared publicationsLi Wang
College of New Energy and Materials
22 shared publications- Zhiyu Huang
College of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu, Sichuan 610500, P. R. China
21 shared publications Zhiyu Huang
College of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500, P. R. China
19 shared publicationsShanshan Dai
College of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500, PR China
17 shared publicationsXiaojiang Li
College of Chemistry and Chemical Engineering, Chongqing University of Science & Technology, Chongqing, PR China
17 shared publications
Latest Publications
- 25 October 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (44) , 33118-33128
Intensifying the Mild-pH Responsiveness of Polymer Emulsions via Dual-Site Surfactant
As the focus of oil and gas extraction shifts toward unconventional reservoirs, improving the stability and solubility of polyacrylamide (PAM) emulsion drag reducers is critical for enhancing reservoir fracturing efficiency. However, persistent pH fluctuations in field environments remain a major obstacle to the application of existing PAM systems, which rely solely on a single responsive site. In this study, a dual-site surfactant, DEAB/OLA, was synthesized using 4-diethylaminobenzaldehyde and oleylamine as raw materials. Using DEAB/OLA-stabilized monomer emulsion as a template, the switchable polymer emulsion was prepared via inverse emulsion polymerization. The resulting emulsion remained stable during storage at 25 °C for up to 50 days. Its pH-responsive release behavior originates from a structural transformation of the surfactant at the oil–water interface. At pH 5.0, the combined effect of imine bond cleavage and tertiary amine protonation disrupts the interfacial film, whereas at pH 9.0, deprotonation of the tertiary amine alone causes the surfactant to detach from the interface. Owing to this synergistic mechanism, the emulsion released the polymer within 20 s at both pH 5.0 and pH 9.0. In pure water and standard brine, a 0.05 wt % polymer solution achieved drag reduction rates of 71.6% and 60.5%, respectively. This dual-site strategy provides a general approach for designing switchable polymer emulsions with a broad pH response window under mild conditions.
- 25 October 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (44) , 33118-33128
Intensifying the Mild-pH Responsiveness of Polymer Emulsions via Dual-Site Surfactant
As the focus of oil and gas extraction shifts toward unconventional reservoirs, improving the stability and solubility of polyacrylamide (PAM) emulsion drag reducers is critical for enhancing reservoir fracturing efficiency. However, persistent pH fluctuations in field environments remain a major obstacle to the application of existing PAM systems, which rely solely on a single responsive site. In this study, a dual-site surfactant, DEAB/OLA, was synthesized using 4-diethylaminobenzaldehyde and oleylamine as raw materials. Using DEAB/OLA-stabilized monomer emulsion as a template, the switchable polymer emulsion was prepared via inverse emulsion polymerization. The resulting emulsion remained stable during storage at 25 °C for up to 50 days. Its pH-responsive release behavior originates from a structural transformation of the surfactant at the oil–water interface. At pH 5.0, the combined effect of imine bond cleavage and tertiary amine protonation disrupts the interfacial film, whereas at pH 9.0, deprotonation of the tertiary amine alone causes the surfactant to detach from the interface. Owing to this synergistic mechanism, the emulsion released the polymer within 20 s at both pH 5.0 and pH 9.0. In pure water and standard brine, a 0.05 wt % polymer solution achieved drag reduction rates of 71.6% and 60.5%, respectively. This dual-site strategy provides a general approach for designing switchable polymer emulsions with a broad pH response window under mild conditions.
- 21 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20212-20228
Investigating Gas Production Characteristics and Mechanism of Residual Coal via Low-Temperature Aqueous In Situ Oxidation
Water-saturated residual coal in abandoned seams enables low-carbon in situ gas generation through low-temperature aqueous oxidation. However, the coal-rank-dependent gas generation characteristics and water-promoted reaction mechanisms remain poorly clarified. In this study, three typical coal samples including lignite (CS-1), bituminous coal (CS-2), and anthracite (CS-3) were selected to systematically evaluate the effects of coal rank, temperature, particle size, and salinity on coal oxidation and gas production. Multiscale structural characterization combined with density functional theory (DFT) calculations was performed to reveal the underlying mechanisms. The results indicated that water exerted a strong promoting effect on the gas generation of low-rank coal. Water immersion increased the CO2 and CH4 yields of CS-1 by 123% and 32%, while only slight increments of 5.5% and 18% were observed for CS-3. Coal particle size significantly controls gas production efficiency. Fine particles of 100−200 mesh achieve a peak CO2 generation rate of 19865.42 ppm/d, which is 2.1 times that of 20−60 mesh coarse particles. Salinity presents a dual regulatory effect. Low salinity at 2000 mg/L facilitates methanation, whereas high salinity at 10000 mg/L severely restricts gas production. Microscopically, water infiltration effectively modifies the coal pore network. The total pore volume increases from 0.00097 to 0.01120 cm3/g and the average pore size rises from 5.58 to 18.38 nm. Active oxygen-containing functional groups decrease markedly in water-bearing samples, and the carboxyl content of CS-1 decreased from 24.52% to 14.54%. DFT simulations confirm that water-induced ·OH radicals reduce the oxidation activation energy of coal from 18.71−34.26 kcal/mol to 2.45−8.31 kcal/mol. This work reveals that the coupling of water-induced pore modification and ·OH-driven chemical activation enables sustained low-temperature oxidation and efficient in situ gas generation of residual coal, providing theoretical support for low-carbon exploitation of abandoned coal resources.
- 21 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20212-20228
Investigating Gas Production Characteristics and Mechanism of Residual Coal via Low-Temperature Aqueous In Situ Oxidation
Water-saturated residual coal in abandoned seams enables low-carbon in situ gas generation through low-temperature aqueous oxidation. However, the coal-rank-dependent gas generation characteristics and water-promoted reaction mechanisms remain poorly clarified. In this study, three typical coal samples including lignite (CS-1), bituminous coal (CS-2), and anthracite (CS-3) were selected to systematically evaluate the effects of coal rank, temperature, particle size, and salinity on coal oxidation and gas production. Multiscale structural characterization combined with density functional theory (DFT) calculations was performed to reveal the underlying mechanisms. The results indicated that water exerted a strong promoting effect on the gas generation of low-rank coal. Water immersion increased the CO2 and CH4 yields of CS-1 by 123% and 32%, while only slight increments of 5.5% and 18% were observed for CS-3. Coal particle size significantly controls gas production efficiency. Fine particles of 100−200 mesh achieve a peak CO2 generation rate of 19865.42 ppm/d, which is 2.1 times that of 20−60 mesh coarse particles. Salinity presents a dual regulatory effect. Low salinity at 2000 mg/L facilitates methanation, whereas high salinity at 10000 mg/L severely restricts gas production. Microscopically, water infiltration effectively modifies the coal pore network. The total pore volume increases from 0.00097 to 0.01120 cm3/g and the average pore size rises from 5.58 to 18.38 nm. Active oxygen-containing functional groups decrease markedly in water-bearing samples, and the carboxyl content of CS-1 decreased from 24.52% to 14.54%. DFT simulations confirm that water-induced ·OH radicals reduce the oxidation activation energy of coal from 18.71−34.26 kcal/mol to 2.45−8.31 kcal/mol. This work reveals that the coupling of water-induced pore modification and ·OH-driven chemical activation enables sustained low-temperature oxidation and efficient in situ gas generation of residual coal, providing theoretical support for low-carbon exploitation of abandoned coal resources.
- 9 September 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (37) , 16877-16892
Deep Eutectic Solvent-Driven Adaptive Interfacial Reconstruction for Noninterfacial-Responsive Emulsion Templates Enabling Thermally Triggered Polymer Release
Responsive surfactants have attracted considerable interest in controlled polymer release from water-in-oil polymer emulsions, as their stimuli-responsive behavior overcomes the dependence of conventional systems on hydrophilic surfactants. However, these systems often suffer from structural complexity, limited compatibility with functional monomers, and potential concerns regarding ecotoxicity and environmental persistence, which restrict their sustainability and broader application. To address these challenges, a green thermoresponsive deep eutectic solvent, oleic acid/lidocaine (OA-LD), was developed to construct a noninterfacial-responsive polymer emulsion template for stable synthesis and controlled release of polymers. Compared with conventional responsive surfactants, OA-LD possesses a simpler composition, facile preparation, favorable biodegradability, and low volatility, endowing the system with both responsive regulation capability and environmental compatibility. Molecular dynamics simulations were employed to elucidate the rapid demulsification mechanism. Upon thermal stimulation, OA-LD aggregates underwent directional migration toward the oil-water interface, disrupting the integrity of the surfactant film. Subsequently, OA-LD molecules embedded into the interfacial region and reduced the compactness of the interfacial film, thereby dynamically regulating emulsion stability and precisely controlling polymer release behavior. This strategy decouples responsive functionality from interfacial stabilization, providing a sustainable platform for intelligent polymer release technologies.
- 9 September 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (37) , 16877-16892
Deep Eutectic Solvent-Driven Adaptive Interfacial Reconstruction for Noninterfacial-Responsive Emulsion Templates Enabling Thermally Triggered Polymer Release
Responsive surfactants have attracted considerable interest in controlled polymer release from water-in-oil polymer emulsions, as their stimuli-responsive behavior overcomes the dependence of conventional systems on hydrophilic surfactants. However, these systems often suffer from structural complexity, limited compatibility with functional monomers, and potential concerns regarding ecotoxicity and environmental persistence, which restrict their sustainability and broader application. To address these challenges, a green thermoresponsive deep eutectic solvent, oleic acid/lidocaine (OA-LD), was developed to construct a noninterfacial-responsive polymer emulsion template for stable synthesis and controlled release of polymers. Compared with conventional responsive surfactants, OA-LD possesses a simpler composition, facile preparation, favorable biodegradability, and low volatility, endowing the system with both responsive regulation capability and environmental compatibility. Molecular dynamics simulations were employed to elucidate the rapid demulsification mechanism. Upon thermal stimulation, OA-LD aggregates underwent directional migration toward the oil-water interface, disrupting the integrity of the surfactant film. Subsequently, OA-LD molecules embedded into the interfacial region and reduced the compactness of the interfacial film, thereby dynamically regulating emulsion stability and precisely controlling polymer release behavior. This strategy decouples responsive functionality from interfacial stabilization, providing a sustainable platform for intelligent polymer release technologies.
- 27 July 2026
- Published by Elsevier in Food Chemistry
- Vol. 525 (Pt 4) , 150592
Optimization and mechanistic study for efficient extraction of curcuminoids from turmeric using a natural hydrophobic deep eutectic solvent
- 27 July 2026
- Published by Elsevier in Food Chemistry
- Vol. 525 (Pt 4) , 150592
Optimization and mechanistic study for efficient extraction of curcuminoids from turmeric using a natural hydrophobic deep eutectic solvent
- 9 July 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (28) , 20719-20734
Enhancing Anticondensate Stability of Pickering Foam through Short-Chain Fluorinated Silane-Modified Nanosepiolite
The extraction of natural gas from condensate-bearing wells urgently requires foam systems with superior oil tolerance. However, conventional surfactant foams suffer from rapid collapse due to hydrocarbon displacement at gas-liquid interfaces. Herein, we develop an oil-resistant Pickering foam with high stability using short-chain fluorinated silane-modified nanosepiolite (designated as FHTES@NSP, where FHTES triethoxy (1H,1H,2H,2H-nanofluorohexyl) silane and NSP denotes nanosepiolite) combined with AOS surfactant for foam drainage gas recovery. Resultantly, The AOS/FHTES@NSP foam system demonstrates exceptional stability across 0-80% condensate content, with half-life extending from 23.1 to 44.6 min and liquid unloading efficiency reaching 68.32% at 10% condensate. The system maintains robust performance under high salinity (100,000 mg·L-1 NaCl), high temperature (90 °C), and in Ca2+-rich brine with the green chelating agent IDS-Na4. We propose that the coadsorption of FHTES@NSP and AOS at the air-water interface forms an elastic, robust composite film that resists oil displacement, while the nanofibers construct a three-dimensional network within Plateau borders to trap emulsified oil droplets, synergistically enhancing foam stability and drainage retardation.
- 9 July 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (28) , 20719-20734
Enhancing Anticondensate Stability of Pickering Foam through Short-Chain Fluorinated Silane-Modified Nanosepiolite
The extraction of natural gas from condensate-bearing wells urgently requires foam systems with superior oil tolerance. However, conventional surfactant foams suffer from rapid collapse due to hydrocarbon displacement at gas-liquid interfaces. Herein, we develop an oil-resistant Pickering foam with high stability using short-chain fluorinated silane-modified nanosepiolite (designated as FHTES@NSP, where FHTES triethoxy (1H,1H,2H,2H-nanofluorohexyl) silane and NSP denotes nanosepiolite) combined with AOS surfactant for foam drainage gas recovery. Resultantly, The AOS/FHTES@NSP foam system demonstrates exceptional stability across 0-80% condensate content, with half-life extending from 23.1 to 44.6 min and liquid unloading efficiency reaching 68.32% at 10% condensate. The system maintains robust performance under high salinity (100,000 mg·L-1 NaCl), high temperature (90 °C), and in Ca2+-rich brine with the green chelating agent IDS-Na4. We propose that the coadsorption of FHTES@NSP and AOS at the air-water interface forms an elastic, robust composite film that resists oil displacement, while the nanofibers construct a three-dimensional network within Plateau borders to trap emulsified oil droplets, synergistically enhancing foam stability and drainage retardation.
- 29 June 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (27) , 19761-19774
pH- and Salt-Responsive Pickering Polymer Emulsion for Controllable Release of Drag Reducers
To address the limitation of a single stimulus source in traditional switching emulsion drag reducers, increasing the variety of responsive groups to emulsifiers is one of the effective measures to broaden the release window of switchable emulsions and enhance the dissolution efficiency of the drag reducer. By leveraging the strong designability and interfacial stability of nanoparticles, multiresponsive switchable emulsion drag reducers were constructed, which effectively simplify the complexity of controlling the release of drag reducers. Herein, based on the concept that the pH sensitivity of the imine bond and the complexation of N with lone electron pairs to metal ions, we have developed a novel strategy for the synthesis of pH-responsive metal–organic frameworks (MOFs) with high stability and recyclability. A nanoparticle (SiO2–NH2@DF-DAP) with pH- and salt responsiveness was constructed to stabilize the switching Pickering emulsion drag reducer. The response behavior of switching Pickering emulsions was confirmed by the conductivity and fluorescence methods. The most stable Pickering emulsion optimized by centrifugation was used as a template for the preparation of a switching Pickering emulsion drag reducer. The switching Pickering emulsion drag reducer exhibited remarkable storage stability even after 45 days because the nanoparticles could stably adsorb on the oil–water interface to form an interfacial film with a rigid multilayer structure. Importantly, the switching Pickering emulsion drag reducer was completely released in only 20 s under the dual response of pH (4) and salt (the concentration of MgCl2 was 70 mM). Besides, the drag reduction rate of the switching Pickering emulsion drag reducer was 65% at a concentration of 0.05 wt %. The successful construction of a switching Pickering emulsion drag reducer provides new strategies and insights for the efficient and rapid release of drag reducers.
- 29 June 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (27) , 19761-19774
pH- and Salt-Responsive Pickering Polymer Emulsion for Controllable Release of Drag Reducers
To address the limitation of a single stimulus source in traditional switching emulsion drag reducers, increasing the variety of responsive groups to emulsifiers is one of the effective measures to broaden the release window of switchable emulsions and enhance the dissolution efficiency of the drag reducer. By leveraging the strong designability and interfacial stability of nanoparticles, multiresponsive switchable emulsion drag reducers were constructed, which effectively simplify the complexity of controlling the release of drag reducers. Herein, based on the concept that the pH sensitivity of the imine bond and the complexation of N with lone electron pairs to metal ions, we have developed a novel strategy for the synthesis of pH-responsive metal–organic frameworks (MOFs) with high stability and recyclability. A nanoparticle (SiO2–NH2@DF-DAP) with pH- and salt responsiveness was constructed to stabilize the switching Pickering emulsion drag reducer. The response behavior of switching Pickering emulsions was confirmed by the conductivity and fluorescence methods. The most stable Pickering emulsion optimized by centrifugation was used as a template for the preparation of a switching Pickering emulsion drag reducer. The switching Pickering emulsion drag reducer exhibited remarkable storage stability even after 45 days because the nanoparticles could stably adsorb on the oil–water interface to form an interfacial film with a rigid multilayer structure. Importantly, the switching Pickering emulsion drag reducer was completely released in only 20 s under the dual response of pH (4) and salt (the concentration of MgCl2 was 70 mM). Besides, the drag reduction rate of the switching Pickering emulsion drag reducer was 65% at a concentration of 0.05 wt %. The successful construction of a switching Pickering emulsion drag reducer provides new strategies and insights for the efficient and rapid release of drag reducers.
- 8 June 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (24) , 12499-12508
CO 2 -Triggered In Situ Silica Particle Formation for Proactive Profile Control between Waterflooding and CO 2 Flooding in Harsh Reservoirs
- 8 June 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (24) , 12499-12508
CO 2 -Triggered In Situ Silica Particle Formation for Proactive Profile Control between Waterflooding and CO 2 Flooding in Harsh Reservoirs
- 23 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (13) , 9571-9581
Enhanced Stability and Release Efficiency of an Emulsion Drag Reducer Using a pH-Responsive Rigid Piperazine Ring Gemini Surfactant
The growing demand for petroleum has intensified the pressure on conventional resources, driving exploration into unconventional reservoirs. Polyacrylamide (PAM) emulsion drag reducers can suppress fracturing fluid turbulence and improve reservoir stimulation, but their poor dissolution efficiency remains a key obstacle to widespread application. Herein, a pH-responsive Gemini surfactant (PA/OA) featuring a rigid piperazine ring as the hydrophilic headgroup was synthesized using piperazine (PA) and oleic acid (HOA). The PA/OA-stabilized monomer emulsion exhibited excellent stability for over 50 days at pH 7.0, enabling the successful inverse emulsion polymerization of PAM. The introduction of the piperazine ring and double hydrophobic tails enhances the molecular rigidity to promote a tight arrangement at the oil-water interface, thereby reinforcing the interfacial film and enhancing the interfacial activity. The surface activity of PA/OA varied at different pH conditions due to the interionic proton transfer between OA and PA. The pH-responsive ionic bonds in PA/OA facilitate rapid release of emulsion drag reducers, with most released within 30 s at pH = 10.0, and achieve a drag reduction rate of 68% at a concentration of 0.05 wt %. The PA/OA-stabilized emulsion effectively reconciled the conflict between long-term storage stability and rapid release performance encountered in single-chain-responsive surfactant systems.
- 23 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (13) , 9571-9581
Enhanced Stability and Release Efficiency of an Emulsion Drag Reducer Using a pH-Responsive Rigid Piperazine Ring Gemini Surfactant
The growing demand for petroleum has intensified the pressure on conventional resources, driving exploration into unconventional reservoirs. Polyacrylamide (PAM) emulsion drag reducers can suppress fracturing fluid turbulence and improve reservoir stimulation, but their poor dissolution efficiency remains a key obstacle to widespread application. Herein, a pH-responsive Gemini surfactant (PA/OA) featuring a rigid piperazine ring as the hydrophilic headgroup was synthesized using piperazine (PA) and oleic acid (HOA). The PA/OA-stabilized monomer emulsion exhibited excellent stability for over 50 days at pH 7.0, enabling the successful inverse emulsion polymerization of PAM. The introduction of the piperazine ring and double hydrophobic tails enhances the molecular rigidity to promote a tight arrangement at the oil-water interface, thereby reinforcing the interfacial film and enhancing the interfacial activity. The surface activity of PA/OA varied at different pH conditions due to the interionic proton transfer between OA and PA. The pH-responsive ionic bonds in PA/OA facilitate rapid release of emulsion drag reducers, with most released within 30 s at pH = 10.0, and achieve a drag reduction rate of 68% at a concentration of 0.05 wt %. The PA/OA-stabilized emulsion effectively reconciled the conflict between long-term storage stability and rapid release performance encountered in single-chain-responsive surfactant systems.