Wencheng Du
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Wencheng Du has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Chun Li
Key Lab of Organic Optoelectronics and Molecular Engineering of Ministry of Education, Laboratory of Flexible Electronics Technology, Department of Chemistry, Tsinghua University, Beijing 100084, People’s Republic of China
6 shared publications - Xiaoqing Jiang
Jiangsu Key Laboratory of New Power Batteries, College of Chemistry and Materials Science, Nanjing Normal University, 1 Wenyuan Road, Nanjing 210023, PR China
5 shared publications - Gaoquan Shi
Department of Chemistry
4 shared publications - Yu-Guo Guo
CAS Key Laboratory of Molecular Nanostructure and Nanotechnology Beijing National Laboratory for Molecular Sciences (BNLMS) Institute of Chemistry, Chinese Academy of Sciences (CAS) Beijing 100190 P.R. China
4 shared publications Guochuang Xu
3 shared publicationsLihua Zhu
3 shared publications
Latest Publications
- 1 February 2020
- Published by Elsevier in Journal of Power Sources
- Vol. 450
Rational-design of polyaniline cathode using proton doping strategy by graphene oxide for enhanced aqueous zinc-ion batteries
- 1 February 2020
- Published by Elsevier in Journal of Power Sources
- Vol. 450
Rational-design of polyaniline cathode using proton doping strategy by graphene oxide for enhanced aqueous zinc-ion batteries
- 1 October 2019
- Published by Elsevier in Journal of Power Sources
- Vol. 437
Pristine graphene for advanced electrochemical energy applications
- 1 October 2019
- Published by Elsevier in Journal of Power Sources
- Vol. 437
Pristine graphene for advanced electrochemical energy applications
- Open Access
- 8 November 2018
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 10 (4) , 1244-1253
Efficient room-temperature production of high-quality graphene by introducing removable oxygen functional groups to the precursor
The excellent solution-processability of graphene oxide (GO) has provided a collection of strategies for the construction of functional graphene assemblies. To improve the performance of graphene-based materials, structurally intact GO should be prepared as a precursor for high-quality graphene; however, solution chemical methods have been constantly challenged by a structural integrity versus fabrication yield trade-off. Here, we report a wet chemical method for the high-efficiency production of a high-quality graphene oxide precursor, with all steps conducted at room-temperature. The functionalization of graphite was performed under temperature and water content control in a concentrated sulfuric acid–potassium permanganate system, and the resulting GO showed a monolayer yield of over 120%. We show that the increased production yield comes from the high functionalization degree and, more interestingly, the functional groups on GO were proven to be removable upon reduction with hydroiodic acid, which produced high-quality graphene-based materials.
- 8 November 2018
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 10 (4) , 1244-1253
Open AccessEfficient room-temperature production of high-quality graphene by introducing removable oxygen functional groups to the precursor
The excellent solution-processability of graphene oxide (GO) has provided a collection of strategies for the construction of functional graphene assemblies. To improve the performance of graphene-based materials, structurally intact GO should be prepared as a precursor for high-quality graphene; however, solution chemical methods have been constantly challenged by a structural integrity versus fabrication yield trade-off. Here, we report a wet chemical method for the high-efficiency production of a high-quality graphene oxide precursor, with all steps conducted at room-temperature. The functionalization of graphite was performed under temperature and water content control in a concentrated sulfuric acid–potassium permanganate system, and the resulting GO showed a monolayer yield of over 120%. We show that the increased production yield comes from the high functionalization degree and, more interestingly, the functional groups on GO were proven to be removable upon reduction with hydroiodic acid, which produced high-quality graphene-based materials.
- 22 January 2018
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 11 (3) , 559-565
Robust graphene composite films for multifunctional electrochemical capacitors with an ultrawide range of areal mass loading toward high-rate frequency response and ultrahigh specific capacitance
The rapid development of portable electronics requires miniaturized and flexible electrochemical capacitors (ECs) with ultrafast frequency response and/or integrated high capacitive performance. Herein, we report such ECs based on the highly conductive films of reduced graphene oxide (rGO) and commercially available poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) prepared by blade coating or filtration. The typical EC with ultrathin film electrodes exhibited a high-rate frequency response (phase angle = −81.4°) at 120 Hz. On the other hand, ECs with freestanding thick film electrodes exhibited outstanding capacitive performance with a wide range linear relationship between areal capacitance and mass loading. Particularly, an ultrathick film electrode with mass loading up to 33 mg cm−2 delivered ultrahigh areal (5365 mF cm−2) and volumetric (203 F cm−3) specific capacitances at 1 A g−1 (33 mA cm−2). The introduced wet-processing method perfectly integrates thin-film ECs for alternating current (AC) line-filtering and thick-film ECs for compact energy storage in one system, which is promising for practical applications.
- 22 January 2018
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 11 (3) , 559-565
Robust graphene composite films for multifunctional electrochemical capacitors with an ultrawide range of areal mass loading toward high-rate frequency response and ultrahigh specific capacitance
The rapid development of portable electronics requires miniaturized and flexible electrochemical capacitors (ECs) with ultrafast frequency response and/or integrated high capacitive performance. Herein, we report such ECs based on the highly conductive films of reduced graphene oxide (rGO) and commercially available poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) prepared by blade coating or filtration. The typical EC with ultrathin film electrodes exhibited a high-rate frequency response (phase angle = −81.4°) at 120 Hz. On the other hand, ECs with freestanding thick film electrodes exhibited outstanding capacitive performance with a wide range linear relationship between areal capacitance and mass loading. Particularly, an ultrathick film electrode with mass loading up to 33 mg cm−2 delivered ultrahigh areal (5365 mF cm−2) and volumetric (203 F cm−3) specific capacitances at 1 A g−1 (33 mA cm−2). The introduced wet-processing method perfectly integrates thin-film ECs for alternating current (AC) line-filtering and thick-film ECs for compact energy storage in one system, which is promising for practical applications.
- 16 January 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (4) , 3895-3901
Transparent Polymeric Strain Sensors for Monitoring Vital Signs and Beyond
Wearable sensors that can precisely detect vital signs are highly desirable for monitoring personal health conditions and medical diagnosis. In this paper, we report an ultrasensitive strain sensor consisting of a 150 nm thick highly conductive dimethylsulfoxide-doped poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) sensing layer and an elastic fluorosilicone rubber substrate. This sensor exhibits a high sensitivity at small strains (e.g., gauge factor at 0.6% strain = 280), low limit of detection (<0.2% strain), and excellent repeatability and cycling stability. Therefore, it is promising for practically detecting vital signs, tiny human motions, and sounds. Furthermore, the semitransparent shallow blue color and the soft rubbery substrate make the strain sensor beautiful and comfortable to the human body.
- 16 January 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (4) , 3895-3901
Transparent Polymeric Strain Sensors for Monitoring Vital Signs and Beyond
Wearable sensors that can precisely detect vital signs are highly desirable for monitoring personal health conditions and medical diagnosis. In this paper, we report an ultrasensitive strain sensor consisting of a 150 nm thick highly conductive dimethylsulfoxide-doped poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) sensing layer and an elastic fluorosilicone rubber substrate. This sensor exhibits a high sensitivity at small strains (e.g., gauge factor at 0.6% strain = 280), low limit of detection (<0.2% strain), and excellent repeatability and cycling stability. Therefore, it is promising for practically detecting vital signs, tiny human motions, and sounds. Furthermore, the semitransparent shallow blue color and the soft rubbery substrate make the strain sensor beautiful and comfortable to the human body.
- 26 July 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 53 (80) , 11005-11007
Organic dispersions of graphene oxide with arbitrary concentrations and improved chemical stability
We report a simple method that can dissolve graphene oxide (GO) in pure organic solvents (e.g., propylene carbonate) as readily as in pure water to form stable dispersions of single layer GO sheets. The GO sheets dispersed in propylene carbonate exhibited much better structural stability than those in water.
- 26 July 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 53 (80) , 11005-11007
Organic dispersions of graphene oxide with arbitrary concentrations and improved chemical stability
We report a simple method that can dissolve graphene oxide (GO) in pure organic solvents (e.g., propylene carbonate) as readily as in pure water to form stable dispersions of single layer GO sheets. The GO sheets dispersed in propylene carbonate exhibited much better structural stability than those in water.
- 6 December 2016
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 138 (49) , 15825-15828
Reshaping Lithium Plating/Stripping Behavior via Bifunctional Polymer Electrolyte for Room-Temperature Solid Li Metal Batteries
High-energy rechargeable Li metal batteries are hindered by dendrite growth due to the use of a liquid electrolyte. Solid polymer electrolytes, as promising candidates to solve the above issue, are expected to own high Li ion conductivity without sacrificing mechanical strength, which is still a big challenge to realize. In this study, a bifunctional solid polymer electrolyte exactly having these two merits is proposed with an interpenetrating network of poly(ether–acrylate) (ipn-PEA) and realized via photopolymerization of ion-conductive poly(ethylene oxide) and branched acrylate. The ipn-PEA electrolyte with facile processing capability integrates high mechanical strength (ca. 12 GPa) with high room-temperature ionic conductance (0.22 mS cm–1), and significantly promotes uniform Li plating/stripping. Li metal full cells assembled with ipn-PEA electrolyte and cathodes within 4.5 V vs Li+/Li operate effectively at a rate of 5 C and cycle stably at a rate of 1 C at room temperature. Because of its fabrication simplicity and compelling characteristics, the bifunctional ipn-PEA electrolyte reshapes the feasibility of room-temperature solid-state Li metal batteries.
- 6 December 2016
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 138 (49) , 15825-15828
Reshaping Lithium Plating/Stripping Behavior via Bifunctional Polymer Electrolyte for Room-Temperature Solid Li Metal Batteries
High-energy rechargeable Li metal batteries are hindered by dendrite growth due to the use of a liquid electrolyte. Solid polymer electrolytes, as promising candidates to solve the above issue, are expected to own high Li ion conductivity without sacrificing mechanical strength, which is still a big challenge to realize. In this study, a bifunctional solid polymer electrolyte exactly having these two merits is proposed with an interpenetrating network of poly(ether–acrylate) (ipn-PEA) and realized via photopolymerization of ion-conductive poly(ethylene oxide) and branched acrylate. The ipn-PEA electrolyte with facile processing capability integrates high mechanical strength (ca. 12 GPa) with high room-temperature ionic conductance (0.22 mS cm–1), and significantly promotes uniform Li plating/stripping. Li metal full cells assembled with ipn-PEA electrolyte and cathodes within 4.5 V vs Li+/Li operate effectively at a rate of 5 C and cycle stably at a rate of 1 C at room temperature. Because of its fabrication simplicity and compelling characteristics, the bifunctional ipn-PEA electrolyte reshapes the feasibility of room-temperature solid-state Li metal batteries.
- 6 June 2016
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 11 (19) , 2690-2694
Sulfur Confined in Sub‐Nanometer‐Sized 2 D Graphene Interlayers and Its Electrochemical Behavior in Lithium–Sulfur Batteries
Microspace‐confined sulfur molecules as cathodes for lithium–sulfur (Li−S) batteries have shown great significance in both scientific and technical aspects. A study of different microspace‐confined sulfur will not only promote the advancement of Li−S batteries but also arouse a wide interest in sulfur chemistry and related applications. Herein, we choose two‐dimensional (2D) graphene interlayer as host and construct 2D space‐confined sulfur model systems by simple intercalation chemistry of graphite oxide. Two routes, including solvothermal method and interlamellar reaction approach, are developed, and sulfur can be easily intercalated into sub‐nanometer‐sized graphene interlayers, forming a graphene confined sulfur structure. The 2D space‐confined sulfur can work well in a carbonate‐based electrolyte and show similar electrochemical behaviors of small sulfur molecules, indicating the special molecular form of sulfur in graphene layers. The 2D space‐confined sulfur concept will be helpful for further understanding the electrochemical character of confined sulfur molecules and designing a high‐performance sulfur cathode.
- 6 June 2016
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 11 (19) , 2690-2694
Sulfur Confined in Sub‐Nanometer‐Sized 2 D Graphene Interlayers and Its Electrochemical Behavior in Lithium–Sulfur Batteries
Microspace‐confined sulfur molecules as cathodes for lithium–sulfur (Li−S) batteries have shown great significance in both scientific and technical aspects. A study of different microspace‐confined sulfur will not only promote the advancement of Li−S batteries but also arouse a wide interest in sulfur chemistry and related applications. Herein, we choose two‐dimensional (2D) graphene interlayer as host and construct 2D space‐confined sulfur model systems by simple intercalation chemistry of graphite oxide. Two routes, including solvothermal method and interlamellar reaction approach, are developed, and sulfur can be easily intercalated into sub‐nanometer‐sized graphene interlayers, forming a graphene confined sulfur structure. The 2D space‐confined sulfur can work well in a carbonate‐based electrolyte and show similar electrochemical behaviors of small sulfur molecules, indicating the special molecular form of sulfur in graphene layers. The 2D space‐confined sulfur concept will be helpful for further understanding the electrochemical character of confined sulfur molecules and designing a high‐performance sulfur cathode.