Paul Jerabek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Paul Jerabek has a total of 237 co-authors. Here are the top co-authors by number of shared publications:
- Peter Schwerdtfeger
Centre for Theoretical Chemistry and Physics, The New Zealand Institute for Advanced Study (NZIAS), Massey University Albany, Private Bag 102904, Auckland 0745, New Zealand
22 shared publications - Gernot Frenking
Fachbereich Chemie Philipps‐Universität Marburg Marburg Germany
15 shared publications Gernot Frenking
Fachbereich Chemie and Wissenschaftliches Zentrum für Materialwissenschaften (WZMW), Universität Marburg, Hans-Meerwein-Straße 4, 35032 Marburg, http://www.uni-marburg.de/fb15/ag-haenisch
11 shared publicationsChristian Gemel
Department of Chemistry , Technical University Munich , Lichtenbergstrasse 4 , D-85748 Garching , Germany
10 shared publications- Roland Augustinus Fischer
Technical University of Munich
10 shared publications - Jan-Michael Mewes
Mulliken Center for Theoretical Chemistry, University of Bonn, Beringstr. 4, 53115 Bonn, Germany
9 shared publications
Latest Publications
- Open Access
- 31 July 2026
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (8) , e70243
Ni–Cr Substitution in TiFe: An Integrated Experimental–Modeling Study of Phase Stability and Hydride Thermodynamics
We present an integrated experimental–theoretical investigation of the combined effects of Ni and Cr substitution in TiFe (1− x − y ) Cr x Ni y on phase stability, lattice properties, and hydrogen sorption behavior. Alloys with fixed total substitution ( x + y = 0.2) were synthesized by arc melting and characterized by X‐ray diffraction, electron microscopy, and pressure–composition–temperature measurements, complemented by density functional theory and CALPHAD modeling. Both substituents expand the B2 TiFe lattice and markedly reduce the equilibrium plateau pressure of the monohydride phase, indicating enhanced hydride stability while largely preserving reversible hydrogen capacity. Structural analysis shows that Cr promotes the formation of a C14 Laves secondary phase, whereas Ni stabilizes the B2 matrix; their combined addition leads to composition‐dependent coexistence of B2 and C14 phases in agreement with calculated phase equilibria. Thermodynamic analysis indicates that increased hydride stability correlates with both lattice expansion and the intrinsic hydrogen affinity of the substituents. The integrated experimental and modeling approach provides a coherent interpretation linking composition, phase stability, and hydrogen thermodynamics. These results provide quantitative guidance for tailoring TiFe‐derived hydrides from recycled steel feedstocks, supporting circular‐economy strategies for large‐scale hydrogen storage technologies.
- 31 July 2026
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (8) , e70243
Open AccessNi–Cr Substitution in TiFe: An Integrated Experimental–Modeling Study of Phase Stability and Hydride Thermodynamics
We present an integrated experimental–theoretical investigation of the combined effects of Ni and Cr substitution in TiFe (1− x − y ) Cr x Ni y on phase stability, lattice properties, and hydrogen sorption behavior. Alloys with fixed total substitution ( x + y = 0.2) were synthesized by arc melting and characterized by X‐ray diffraction, electron microscopy, and pressure–composition–temperature measurements, complemented by density functional theory and CALPHAD modeling. Both substituents expand the B2 TiFe lattice and markedly reduce the equilibrium plateau pressure of the monohydride phase, indicating enhanced hydride stability while largely preserving reversible hydrogen capacity. Structural analysis shows that Cr promotes the formation of a C14 Laves secondary phase, whereas Ni stabilizes the B2 matrix; their combined addition leads to composition‐dependent coexistence of B2 and C14 phases in agreement with calculated phase equilibria. Thermodynamic analysis indicates that increased hydride stability correlates with both lattice expansion and the intrinsic hydrogen affinity of the substituents. The integrated experimental and modeling approach provides a coherent interpretation linking composition, phase stability, and hydrogen thermodynamics. These results provide quantitative guidance for tailoring TiFe‐derived hydrides from recycled steel feedstocks, supporting circular‐economy strategies for large‐scale hydrogen storage technologies.
- Open Access
- 2 February 2026
- Published by Taylor & Francis in Molecular Physics
- Vol. 124 (7-8)
Relativistic effects are crucial for uranium-phosphorus bonding: a DFT study of cyclopentadienyluranium-phosphine complexes
- 2 February 2026
- Published by Taylor & Francis in Molecular Physics
- Vol. 124 (7-8)
Open AccessRelativistic effects are crucial for uranium-phosphorus bonding: a DFT study of cyclopentadienyluranium-phosphine complexes
- 14 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (2) , 1242-1253
Role of Elemental Substitution on Hydrogen Incorporation in Characteristic Ti/Fe-Based Oxides
- 14 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (2) , 1242-1253
Role of Elemental Substitution on Hydrogen Incorporation in Characteristic Ti/Fe-Based Oxides
- Open Access
- 14 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Relativistic effects are crucial for uranium-phosphorus bonding: A DFT study of cyclopentadienyluranium-phosphine complexes
The influence of relativistic effects on the uranium–phosphorus bond in different cyclopentadienyluranium–phosphine complexes was systematically investigated using density functional theory (DFT). Calculations utilising the zeroth-order regular approximation (ZORA) and effective core potentials (ECPs) with varying levels of relativistic treatment (Dirac-Hartree-Fock, Wood-Boring, and non-relativistic) were compared. Structural parameters, bonding characteristics (via FMO, NBO, and QTAIM analyses), and bond dissociation energies were evaluated. While relativistic ECPs and ZORA reproduce experimental bond lengths and bonding character, non-relativistic calculations overestimate U–P bonds by more than 5% and underestimate covalency, with bond dissociation energies reduced by up to 47 kJ/mol. Non-relativistic calculations revealed a better energy match of the frontier orbitals, but these are outweighed by the improved orbital overlap when including relativistic effects. Our results demonstrate that relativistic effects are crucial for the accurate description of actinide-main group element bonds and highlight the necessity of including relativistic corrections for quantitative computational studies of heavy element chemistry.
- 14 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRelativistic effects are crucial for uranium-phosphorus bonding: A DFT study of cyclopentadienyluranium-phosphine complexes
The influence of relativistic effects on the uranium–phosphorus bond in different cyclopentadienyluranium–phosphine complexes was systematically investigated using density functional theory (DFT). Calculations utilising the zeroth-order regular approximation (ZORA) and effective core potentials (ECPs) with varying levels of relativistic treatment (Dirac-Hartree-Fock, Wood-Boring, and non-relativistic) were compared. Structural parameters, bonding characteristics (via FMO, NBO, and QTAIM analyses), and bond dissociation energies were evaluated. While relativistic ECPs and ZORA reproduce experimental bond lengths and bonding character, non-relativistic calculations overestimate U–P bonds by more than 5% and underestimate covalency, with bond dissociation energies reduced by up to 47 kJ/mol. Non-relativistic calculations revealed a better energy match of the frontier orbitals, but these are outweighed by the improved orbital overlap when including relativistic effects. Our results demonstrate that relativistic effects are crucial for the accurate description of actinide-main group element bonds and highlight the necessity of including relativistic corrections for quantitative computational studies of heavy element chemistry.
- 13 September 2025
- Published by Elsevier in Acta Materialia
- Vol. 301
Predicting hydrogen storage capacity loss of FeTi by ab initio thermodynamic modelling of Fe–Ti–Si phase equilibria
- 13 September 2025
- Published by Elsevier in Acta Materialia
- Vol. 301
Predicting hydrogen storage capacity loss of FeTi by ab initio thermodynamic modelling of Fe–Ti–Si phase equilibria
- Open Access
- 5 August 2025
- Published by Elsevier in Acta Materialia
- Vol. 298
Low-temperature regeneration of metal hydride after impurity gas exposure
- 5 August 2025
- Published by Elsevier in Acta Materialia
- Vol. 298
Open AccessLow-temperature regeneration of metal hydride after impurity gas exposure
- Open Access
- 16 January 2025
- Published by Elsevier in Scripta Materialia
- Vol. 259
A thermodynamic approach to modeling multicomponent FeTi-based alloys for hydrogen storage
- 16 January 2025
- Published by Elsevier in Scripta Materialia
- Vol. 259
Open AccessA thermodynamic approach to modeling multicomponent FeTi-based alloys for hydrogen storage
- Open Access
- 24 October 2024
- Published by Springer Nature in npj Computational Materials
- Vol. 10 (1) , 1-14
Multiscale modeling of metal-hydride interphases—quantification of decoupled chemo-mechanical energies
The quantification of interphase properties between metals and their corresponding hydrides is crucial for modeling the thermodynamics and kinetics of the hydrogenation processes in solid-state hydrogen storage materials. In particular, interphase boundary energies assume a pivotal role in determining the kinetics of nucleation, growth, and coarsening of hydrides, alongside accompanying morphological evolution during hydrogenation. The total interphase energy arises from both chemical bonding and mechanical strains in these solid-state systems. Since these contributions are usually coupled, it is challenging to distinguish via conventional computational approaches. Here, a comprehensive atomistic modeling methodology is developed to decouple chemical and mechanical energy contributions using first-principles calculations, of which feasibility is demonstrated by quantifying chemical and elastic strain energies of key interfaces within the FeTi metal-hydride system. Derived materials parameters are then employed for mesoscopic micromechanical analysis, predicting crystallographic orientations in line with experimental observations. The multiscale approach outlined verifies the importance of the chemo-mechanical interplay in the morphological evolution of growing hydride phases, and can be generalized to investigate other systems. In addition, it can streamline the design of atomistic models for the quantitative evaluation of interphase properties between dissimilar phases and allow for efficient predictions of their preferred phase boundary orientations.
- 24 October 2024
- Published by Springer Nature in npj Computational Materials
- Vol. 10 (1) , 1-14
Open AccessMultiscale modeling of metal-hydride interphases—quantification of decoupled chemo-mechanical energies
The quantification of interphase properties between metals and their corresponding hydrides is crucial for modeling the thermodynamics and kinetics of the hydrogenation processes in solid-state hydrogen storage materials. In particular, interphase boundary energies assume a pivotal role in determining the kinetics of nucleation, growth, and coarsening of hydrides, alongside accompanying morphological evolution during hydrogenation. The total interphase energy arises from both chemical bonding and mechanical strains in these solid-state systems. Since these contributions are usually coupled, it is challenging to distinguish via conventional computational approaches. Here, a comprehensive atomistic modeling methodology is developed to decouple chemical and mechanical energy contributions using first-principles calculations, of which feasibility is demonstrated by quantifying chemical and elastic strain energies of key interfaces within the FeTi metal-hydride system. Derived materials parameters are then employed for mesoscopic micromechanical analysis, predicting crystallographic orientations in line with experimental observations. The multiscale approach outlined verifies the importance of the chemo-mechanical interplay in the morphological evolution of growing hydride phases, and can be generalized to investigate other systems. In addition, it can streamline the design of atomistic models for the quantitative evaluation of interphase properties between dissimilar phases and allow for efficient predictions of their preferred phase boundary orientations.
- 20 December 2023
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 53 (5) , 1999-2007
Predictable electronic tuning of FeII and RuII complexes via choice of azine: correlation of ligand pKa with Epa(MIII/II) of complex
Strong linear correlations are seen for FeII and RuII families of [M(Lazine)3]2+, between observed E(MIII/II) and DFT calculated HOMO energy or ionisation potential of [M(Lazine)3]2+, or with easily calculated pKa value of Lazine.
- 20 December 2023
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 53 (5) , 1999-2007
Predictable electronic tuning of FeII and RuII complexes via choice of azine: correlation of ligand pKa with Epa(MIII/II) of complex
Strong linear correlations are seen for FeII and RuII families of [M(Lazine)3]2+, between observed E(MIII/II) and DFT calculated HOMO energy or ionisation potential of [M(Lazine)3]2+, or with easily calculated pKa value of Lazine.
- Open Access
- 29 November 2023
- Published by Wiley in Angewandte Chemie
- Vol. 136 (1)
Einflüsse auf die Balance zwischen bcc‐ und fcc‐Phasenstabilitäten von Alkali‐ und Münzmetallen
Bisher war es ein Rätsel, weshalb die Elemente der Gruppe 1 in der kubisch‐raumzentrierten (bcc) und die iso‐elektronischen Elemente der Gruppe 11 in der kubisch‐flächenzentrierten Struktur (fcc) kristallisieren. In dieser Untersuchung auf Grundlage von relativistischer Dichtefunktionaltheorie wird demonstriert, wie ein komplexes Zusammenspiel zwischen Mehrteilcheneffekten, Schwingungsenergiebeiträgen und Dispersionswechselwirkungen eine Antwort auf diese langjährige Kontroverse liefert und dabei gleichzeitig zum Verständnis des Periodensystems der Kristallstrukturen beiträgt. Ein sanfter, diffusionloser Übergang durch kuboidale Gitterstrukturen hindurch bietet detaillierte Einblicke in den bcc→fcc Phasenübergang für die Elemente der Gruppen 1 und 11.
- 29 November 2023
- Published by Wiley in Angewandte Chemie
- Vol. 136 (1)
Open AccessEinflüsse auf die Balance zwischen bcc‐ und fcc‐Phasenstabilitäten von Alkali‐ und Münzmetallen
Bisher war es ein Rätsel, weshalb die Elemente der Gruppe 1 in der kubisch‐raumzentrierten (bcc) und die iso‐elektronischen Elemente der Gruppe 11 in der kubisch‐flächenzentrierten Struktur (fcc) kristallisieren. In dieser Untersuchung auf Grundlage von relativistischer Dichtefunktionaltheorie wird demonstriert, wie ein komplexes Zusammenspiel zwischen Mehrteilcheneffekten, Schwingungsenergiebeiträgen und Dispersionswechselwirkungen eine Antwort auf diese langjährige Kontroverse liefert und dabei gleichzeitig zum Verständnis des Periodensystems der Kristallstrukturen beiträgt. Ein sanfter, diffusionloser Übergang durch kuboidale Gitterstrukturen hindurch bietet detaillierte Einblicke in den bcc→fcc Phasenübergang für die Elemente der Gruppen 1 und 11.