Amin Falamaki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Amin Falamaki has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Mehdi Homaee
Department of Mining and Environmental Engineering, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran
5 shared publications - Ali Shafiee
California State Polytechnic University Pomona, Pomona, USA
4 shared publications - Amir Hossein Vakili
Department of Civil Engineering, Faculty of Engineering, Zand Institute of Higher Education, Shiraz, Iran
4 shared publications - Ali Noorzad
Faculty of Civil, Water and Environmental Engineering, Shahid Beheshti University, Tehran, Iran
3 shared publications - Amir Hossein Shafiee
Department of Civil Engineering, Faculty of Civil Engineering and Architecture, Shahid Chamran University of Ahvaz, Ahvaz, Iran
3 shared publications - Mahnaz Eskandari
Soil and Water Research Institute, Agricultural Research Education and Extension Organization (AREEO), Karaj, Iran
3 shared publications
Latest Publications
- Open Access
- 28 January 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 3683
Predicting the mechanical behavior of municipal solid waste layers in the Barmshour Landfill stability analysis
Slope stability is a crucial aspect of geotechnical engineering, particularly for landfills where municipal solid waste (MSW) layers are subjected to both static and seismic forces. This study represents the first application of hybrid metaheuristic–neural models to the Barmshour Landfill, introducing an innovative predictive framework capable of guiding real-world design, stability evaluation, and decision-making processes in waste management engineering. Four hybrid models—BBO-MLP, MVO-MLP, VS-MLP, and BSA-MLP—were developed and evaluated using real data from the Barmshour Landfill in Shiraz, Iran. The MVO-MLP model achieved the best performance, with coefficient of determination (R2) values of 0.899 (training) and 0.898 (testing), and corresponding RMSEs of 77.60 and 89.44. The results demonstrate that hybrid metaheuristic–neural models can capture complex slope behaviors more effectively than traditional approaches. The primary advancement of this research lies in its systematic comparison of multiple hybrid algorithms and their demonstration of robustness under variable conditions. Practically, the proposed framework provides engineers with a more reliable and adaptive tool for assessing landfill stability and managing geotechnical risks. These findings highlight the growing potential of intelligent hybrid systems to support safer and more data-driven waste management infrastructure.
- 28 January 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 3683
Open AccessPredicting the mechanical behavior of municipal solid waste layers in the Barmshour Landfill stability analysis
Slope stability is a crucial aspect of geotechnical engineering, particularly for landfills where municipal solid waste (MSW) layers are subjected to both static and seismic forces. This study represents the first application of hybrid metaheuristic–neural models to the Barmshour Landfill, introducing an innovative predictive framework capable of guiding real-world design, stability evaluation, and decision-making processes in waste management engineering. Four hybrid models—BBO-MLP, MVO-MLP, VS-MLP, and BSA-MLP—were developed and evaluated using real data from the Barmshour Landfill in Shiraz, Iran. The MVO-MLP model achieved the best performance, with coefficient of determination (R2) values of 0.899 (training) and 0.898 (testing), and corresponding RMSEs of 77.60 and 89.44. The results demonstrate that hybrid metaheuristic–neural models can capture complex slope behaviors more effectively than traditional approaches. The primary advancement of this research lies in its systematic comparison of multiple hybrid algorithms and their demonstration of robustness under variable conditions. Practically, the proposed framework provides engineers with a more reliable and adaptive tool for assessing landfill stability and managing geotechnical risks. These findings highlight the growing potential of intelligent hybrid systems to support safer and more data-driven waste management infrastructure.
- 22 December 2025
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 202
Assessing liquefaction potential using Arias intensity: a logistic regression approach with an updated database
- 22 December 2025
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 202
Assessing liquefaction potential using Arias intensity: a logistic regression approach with an updated database
- 18 May 2024
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 42 (6) , 4913-4929
Soil Improvement by Electrokinetic Sodium Silicate Injection into a Sand Formation Containing Fine Grains
- 18 May 2024
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 42 (6) , 4913-4929
Soil Improvement by Electrokinetic Sodium Silicate Injection into a Sand Formation Containing Fine Grains
- 31 May 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (31) , 77517-77534
Experimental investigation of the effect of landfill leachate on the mechanical and cracking behavior of polypropylene fiber-reinforced compacted clay liner
This paper aims to investigate the effect of leachate on the geotechnical parameters and the cracking behavior of compacted clay liners (CCLs) containing different percentages of polypropylene fibers. Accordingly, 200 compacted clay samples were reinforced with different percentages of fiber contents (FC) (i.e., 0, 0.5, 0.75, and 1%) and prepared with water or leachate to conduct different laboratory tests. First, the physical properties of the clay were determined. Then, the shear strength parameters (i.e., cohesion and friction angle), unconfined compressive strength, and the hydraulic permeability were determined subjected to water or leachate. Notably, the cracking behavior was modeled using visual images of the samples. The leachate increased desiccation cracks in the natural soil from 0.425 to nearly 1.111%. However, the addition of 0.5% (in the case of water) and 1% (in the case of leachate) fiber to the soil reduced the surface desiccation cracks in clay liners to about 0.185 and 0.352%, respectively. In both water- or leachate-prepared samples, the addition of fibers significantly increased the cohesion and friction angle. The shear strengths of the unreinforced leachate-prepared samples were lower than those of the water-prepared samples. The shear strength and unconfined compressive strength of all specimens increased with increasing fiber percentage. The presence of fibers in all samples caused more ductile behavior. The required amount of energy to achieve the maximum strength in the samples increased with increasing FC. By increasing the percentage of fibers, the permeability of the natural soil and the leachate-prepared samples increased. However, the highest permeability was observed in the leachate-prepared samples containing 1% fibers of 8.3 × 10–10 m/s, which is less than 10–9 m/s (maximum allowable permeability for clay liners). Finally, the obtained results were satisfactorily confirmed by scanning electron microscopy (SEM) analysis.
- 31 May 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (31) , 77517-77534
Experimental investigation of the effect of landfill leachate on the mechanical and cracking behavior of polypropylene fiber-reinforced compacted clay liner
This paper aims to investigate the effect of leachate on the geotechnical parameters and the cracking behavior of compacted clay liners (CCLs) containing different percentages of polypropylene fibers. Accordingly, 200 compacted clay samples were reinforced with different percentages of fiber contents (FC) (i.e., 0, 0.5, 0.75, and 1%) and prepared with water or leachate to conduct different laboratory tests. First, the physical properties of the clay were determined. Then, the shear strength parameters (i.e., cohesion and friction angle), unconfined compressive strength, and the hydraulic permeability were determined subjected to water or leachate. Notably, the cracking behavior was modeled using visual images of the samples. The leachate increased desiccation cracks in the natural soil from 0.425 to nearly 1.111%. However, the addition of 0.5% (in the case of water) and 1% (in the case of leachate) fiber to the soil reduced the surface desiccation cracks in clay liners to about 0.185 and 0.352%, respectively. In both water- or leachate-prepared samples, the addition of fibers significantly increased the cohesion and friction angle. The shear strengths of the unreinforced leachate-prepared samples were lower than those of the water-prepared samples. The shear strength and unconfined compressive strength of all specimens increased with increasing fiber percentage. The presence of fibers in all samples caused more ductile behavior. The required amount of energy to achieve the maximum strength in the samples increased with increasing FC. By increasing the percentage of fibers, the permeability of the natural soil and the leachate-prepared samples increased. However, the highest permeability was observed in the leachate-prepared samples containing 1% fibers of 8.3 × 10–10 m/s, which is less than 10–9 m/s (maximum allowable permeability for clay liners). Finally, the obtained results were satisfactorily confirmed by scanning electron microscopy (SEM) analysis.
- 6 August 2022
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 24 (6) , 2280-2290
Portland cement solidified construction waste using MSW leachate and phosphate admixtures
- 6 August 2022
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 24 (6) , 2280-2290
Portland cement solidified construction waste using MSW leachate and phosphate admixtures
- Open Access
- 27 June 2022
- Published by Riga Technical University in The Baltic Journal of Road and Bridge Engineering
- Vol. 17 (2) , 185-212
Feasibility Study of Petrochemical Waste and Cement Usage for Saline Road Subgrade Stabilisation
The widespread distributions of saline soils in Iran cause a range of problems for road construction projects due to insufficient shear strength, salt solubility potential and swelling. This paper conducts experimental tests using different cement contents and a sort of petrochemical waste with two curing methods to stabilise saline soil samples. Strength, compressibility and chemical tests were conducted, X-ray diffraction analyses were performed, and scanning electron microscope pictures were prepared for basic materials and stabilised saline soil samples in this paper. The results indicate that both petrochemical soda ash waste and cement enhance the shear strength of saline soil, especially after 28 days of curing. However, the combination is more appropriate from the swelling and salt solubility potential viewpoint. The optimum combination of 2% cement and 5% of petrochemical soda ash waste, cured by method 2 for 28 days, results in the most significant shear strength enhancement (127%). Furthermore, a swelling quantity of the optimum combination is reasonably restricted. X-ray diffraction test results and scanning electron microscope pictures demonstrated that despite the presence of ettringite agents, the formation quantity of these minerals is negligible. The salt is well stabilised, and its solubility potential dramatically decreases.
- 27 June 2022
- Published by Riga Technical University in The Baltic Journal of Road and Bridge Engineering
- Vol. 17 (2) , 185-212
Open AccessFeasibility Study of Petrochemical Waste and Cement Usage for Saline Road Subgrade Stabilisation
The widespread distributions of saline soils in Iran cause a range of problems for road construction projects due to insufficient shear strength, salt solubility potential and swelling. This paper conducts experimental tests using different cement contents and a sort of petrochemical waste with two curing methods to stabilise saline soil samples. Strength, compressibility and chemical tests were conducted, X-ray diffraction analyses were performed, and scanning electron microscope pictures were prepared for basic materials and stabilised saline soil samples in this paper. The results indicate that both petrochemical soda ash waste and cement enhance the shear strength of saline soil, especially after 28 days of curing. However, the combination is more appropriate from the swelling and salt solubility potential viewpoint. The optimum combination of 2% cement and 5% of petrochemical soda ash waste, cured by method 2 for 28 days, results in the most significant shear strength enhancement (127%). Furthermore, a swelling quantity of the optimum combination is reasonably restricted. X-ray diffraction test results and scanning electron microscope pictures demonstrated that despite the presence of ettringite agents, the formation quantity of these minerals is negligible. The salt is well stabilised, and its solubility potential dramatically decreases.
- 23 January 2022
- Published by Springer Nature in Landslides
- Vol. 19 (3) , 659-671
Probabilistic analysis of an 80,000 m2 landslide in Shiraz, Iran
- 23 January 2022
- Published by Springer Nature in Landslides
- Vol. 19 (3) , 659-671
Probabilistic analysis of an 80,000 m2 landslide in Shiraz, Iran
- 24 June 2021
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 20 (2) , 185-194
Simulating Effect of Potassium Carbonate on Quantity and Quality of Municipal Solid Waste Leachate
- 24 June 2021
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 20 (2) , 185-194
Simulating Effect of Potassium Carbonate on Quantity and Quality of Municipal Solid Waste Leachate
- 10 June 2021
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 80 (8) , 6303-6320
Effect of electric arc and ladle furnace slags on the strength and swelling behavior of cement-stabilized expansive clay
- 10 June 2021
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 80 (8) , 6303-6320
Effect of electric arc and ladle furnace slags on the strength and swelling behavior of cement-stabilized expansive clay