Andrey Aslandukov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrey Aslandukov has a total of 159 co-authors. Here are the top co-authors by number of shared publications:
- Natalia Dubrovinskaia
Material Physics and Technology at Extreme Conditions, Bavarian Research Institute of Experimental Geochemistry and Geophysics (BGI), University of Bayreuth, Universitätsstraße 30, Bayreuth 95440, Germany
24 shared publications - Alena Aslandukova
Institute of Inorganic and Analytical Chemistry, Goethe University Frankfurt, Frankfurt, Germany
20 shared publications - Leonid Dubrovinsky
University of Bayreuth
20 shared publications - Fariia Iasmin Akbar
Institute of Inorganic and Analytical Chemistry, Goethe University Frankfurt, Max-von-Laue-Straße 7, Frankfurt 60438, Germany
16 shared publications - Yuqing Yin
Material Physics and Technology at Extreme Conditions, Bayerisches Geoinstitut, University of Bayreuth, Bayreuth, Germany
15 shared publications - Maxim Bykov
Goethe University Frankfurt
13 shared publications
Latest Publications
- Open Access
- 28 September 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (40) , 23573-23580
High-Pressure Synthesis of Pd(N5)2·N2: One-Dimensional Pentazolate Coordination Polymer with Guest Nitrogen Molecules
Pentazolates, an emerging family of nitrogen-rich materials featuring the aromatic cyclo-N5– anion, typically crystallize as nonpolymeric or three-dimensional (3D) coordination networks, whereas low-dimensional (1D and 2D) forms remain exceptionally rare. Here, we exploit the square-planar coordination preference of d8 Pd2+ to achieve dimensional control and synthesize Pd(N5)2·N2, the first high-pressure 1D pentazolate coordination polymer. The compound forms in a laser-heated diamond anvil cell at 118 GPa and 2900 K, while lower-pressure experiments yield only PdN2 dinitride. The crystal structure of Pd(N5)2·N2 was determined by synchrotron single-crystal X-ray diffraction from a multigrain sample and corroborated by density functional theory calculations. This discovery establishes a strategy for engineering low-dimensional pentazolate-based materials and potentially enabling dimensional control in other polynitrides. We also provide an overview of experimentally synthesized high-pressure pentazolates and discuss how cation properties influence their synthesis pressures, thereby improving understanding of pentazolate formation pressures.
- 28 September 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (40) , 23573-23580
Open AccessHigh-Pressure Synthesis of Pd(N5)2·N2: One-Dimensional Pentazolate Coordination Polymer with Guest Nitrogen Molecules
Pentazolates, an emerging family of nitrogen-rich materials featuring the aromatic cyclo-N5– anion, typically crystallize as nonpolymeric or three-dimensional (3D) coordination networks, whereas low-dimensional (1D and 2D) forms remain exceptionally rare. Here, we exploit the square-planar coordination preference of d8 Pd2+ to achieve dimensional control and synthesize Pd(N5)2·N2, the first high-pressure 1D pentazolate coordination polymer. The compound forms in a laser-heated diamond anvil cell at 118 GPa and 2900 K, while lower-pressure experiments yield only PdN2 dinitride. The crystal structure of Pd(N5)2·N2 was determined by synchrotron single-crystal X-ray diffraction from a multigrain sample and corroborated by density functional theory calculations. This discovery establishes a strategy for engineering low-dimensional pentazolate-based materials and potentially enabling dimensional control in other polynitrides. We also provide an overview of experimentally synthesized high-pressure pentazolates and discuss how cation properties influence their synthesis pressures, thereby improving understanding of pentazolate formation pressures.
- Open Access
- 17 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (30) , 17749-17755
Stereochemically Active Lone Electron Pairs in the Chalcogen Oxide-Carbonates Te[CO3]O and Te4O7[CO3] at Elevated Pressures
Two anhydrous tellurium carbonates, Te[CO3]O and Te4O7[CO3], have been synthesized in laser-heated diamond anvil cells by a reaction of TeO2 with CO2. Te[CO3]O was obtained at higher pressures (40(2) GPa), while Te4O7[CO3] was synthesized at moderate pressures (20(2) GPa). The crystal structures of both compounds were determined from synchrotron single crystal X-ray diffraction data and confirmed by density functional theory-based calculations. For Te[CO3]O the experimental Raman data were accurately reproduced by a Raman spectrum derived from the calculations. Both carbonates belong to the family of sp2-carbonates and are characterized by the presence of trigonal-planar [CO3]2–-groups. While the crystal structure of Te[CO3]O is rather simple, Te4O7[CO3] is a layered compound with layers of [CO3]2–-groups alternating with complex Te–O-layers. Our DFT-based calculations show that stereochemically active lone electron pairs are present in both crystal structures at elevated pressures. The successful synthesis of Te[CO3]O is a significant enlargement of the crystal chemistry of carbonates, as it demonstrates that anhydrous carbonates of chalcogenide group elements hosting no further cations can be synthesized. Excluding the noble gases, the chalcogenide group was the last main group of the periodic table where such carbonates were not known up to now.
- 17 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (30) , 17749-17755
Open AccessStereochemically Active Lone Electron Pairs in the Chalcogen Oxide-Carbonates Te[CO3]O and Te4O7[CO3] at Elevated Pressures
Two anhydrous tellurium carbonates, Te[CO3]O and Te4O7[CO3], have been synthesized in laser-heated diamond anvil cells by a reaction of TeO2 with CO2. Te[CO3]O was obtained at higher pressures (40(2) GPa), while Te4O7[CO3] was synthesized at moderate pressures (20(2) GPa). The crystal structures of both compounds were determined from synchrotron single crystal X-ray diffraction data and confirmed by density functional theory-based calculations. For Te[CO3]O the experimental Raman data were accurately reproduced by a Raman spectrum derived from the calculations. Both carbonates belong to the family of sp2-carbonates and are characterized by the presence of trigonal-planar [CO3]2–-groups. While the crystal structure of Te[CO3]O is rather simple, Te4O7[CO3] is a layered compound with layers of [CO3]2–-groups alternating with complex Te–O-layers. Our DFT-based calculations show that stereochemically active lone electron pairs are present in both crystal structures at elevated pressures. The successful synthesis of Te[CO3]O is a significant enlargement of the crystal chemistry of carbonates, as it demonstrates that anhydrous carbonates of chalcogenide group elements hosting no further cations can be synthesized. Excluding the noble gases, the chalcogenide group was the last main group of the periodic table where such carbonates were not known up to now.
- Open Access
- 24 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (15) , 15586-15592
Inorganic Tricarbonate: High-Pressure Synthesis and Structure of K 2 C 3 O 7
The synthesis of carbonates with novel types of anions is important for geoscience, chemistry, and materials science. Herein, we present the first inorganic tricarbonate salt, K2C3O7, discovered in laser-heated diamond anvil cells at 55(3) and 45(2) GPa. The crystal structure of K2C3O7 was determined in situ by using synchrotron single-crystal X-ray diffraction from a polycrystalline sample. It features nonplanar [C3O7]2- anions, which consist of three corner-sharing planar CO3 groups rotated relative to one another. This anion extends the homologous series of sp2-carbonates: [CO3]2-─[C2O5]2-─[C3O7]2-. Raman spectroscopy establishes the characteristic vibrational fingerprint of the [C3O7]2- anion. Density functional theory (DFT) calculations corroborate the experimental results and suggest a thermodynamic stability of K2C3O7 between 10 and 55 GPa. DFT calculations predict a phase transition between 80 and 90 GPa associated with polymerization of the [C3O7]2- groups, accompanied by a change in the coordination polyhedra of two carbon atoms from triangles to tetrahedra. These results imply that other sp2-and mixed sp2/sp3-carbonates might be stabilized at a high pressure.
- 24 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (15) , 15586-15592
Open AccessInorganic Tricarbonate: High-Pressure Synthesis and Structure of K 2 C 3 O 7
The synthesis of carbonates with novel types of anions is important for geoscience, chemistry, and materials science. Herein, we present the first inorganic tricarbonate salt, K2C3O7, discovered in laser-heated diamond anvil cells at 55(3) and 45(2) GPa. The crystal structure of K2C3O7 was determined in situ by using synchrotron single-crystal X-ray diffraction from a polycrystalline sample. It features nonplanar [C3O7]2- anions, which consist of three corner-sharing planar CO3 groups rotated relative to one another. This anion extends the homologous series of sp2-carbonates: [CO3]2-─[C2O5]2-─[C3O7]2-. Raman spectroscopy establishes the characteristic vibrational fingerprint of the [C3O7]2- anion. Density functional theory (DFT) calculations corroborate the experimental results and suggest a thermodynamic stability of K2C3O7 between 10 and 55 GPa. DFT calculations predict a phase transition between 80 and 90 GPa associated with polymerization of the [C3O7]2- groups, accompanied by a change in the coordination polyhedra of two carbon atoms from triangles to tetrahedra. These results imply that other sp2-and mixed sp2/sp3-carbonates might be stabilized at a high pressure.
- Open Access
- 4 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (11) , 11915-11924
Stabilization of the [C 2 N 5 ] 7– Anion in Recoverable High-Pressure Eu 4 Fe 0.864(6) (C 2 N 5 ) 2 Pyronitridocarbonate
Synthesis at extreme conditions enables access to nitrogen-rich carbon-nitrogen anions that cannot be obtained at ambient conditions. Here, through a direct reaction between Eu(N3)2 and EuC2 with Fe in a laser-heated diamond anvil cell (DAC) at 50(3) GPa, we synthesized the first inorganic hydrogen-free pyronitridocarbonate, Eu4Fex(C2N5)2, x = 0.864(6), featuring novel highly charged [C2N5]7- anions, along with the first stoichiometric oxygen-free rare-earth metal guanidinate Eu5(CN3)3. The crystal structures of both compounds were determined via synchrotron single-crystal X-ray diffraction (SCXRD) and fully corroborated by density functional theory (DFT) calculations. Eu4Fex(C2N5)2 was found to be recoverable at pressures close to ambient. Keeping the sample at ambient conditions for 1 day leads to splitting of half of the [C2N5]7- units in Eu4Fex(C2N5)2 into the guanidinate [CN3]5- and carbodiimide [CN2]2- anions. The statistical analysis of the multigrain SCXRD data and DFT-based electronic structure analysis well defined the chemical nature of the bonding in [C2N5]7- and [CN3]5- anions. This study provides a clear synthetic pathway to a new class of inorganic nitridocarbonates.
- 4 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (11) , 11915-11924
Open AccessStabilization of the [C 2 N 5 ] 7– Anion in Recoverable High-Pressure Eu 4 Fe 0.864(6) (C 2 N 5 ) 2 Pyronitridocarbonate
Synthesis at extreme conditions enables access to nitrogen-rich carbon-nitrogen anions that cannot be obtained at ambient conditions. Here, through a direct reaction between Eu(N3)2 and EuC2 with Fe in a laser-heated diamond anvil cell (DAC) at 50(3) GPa, we synthesized the first inorganic hydrogen-free pyronitridocarbonate, Eu4Fex(C2N5)2, x = 0.864(6), featuring novel highly charged [C2N5]7- anions, along with the first stoichiometric oxygen-free rare-earth metal guanidinate Eu5(CN3)3. The crystal structures of both compounds were determined via synchrotron single-crystal X-ray diffraction (SCXRD) and fully corroborated by density functional theory (DFT) calculations. Eu4Fex(C2N5)2 was found to be recoverable at pressures close to ambient. Keeping the sample at ambient conditions for 1 day leads to splitting of half of the [C2N5]7- units in Eu4Fex(C2N5)2 into the guanidinate [CN3]5- and carbodiimide [CN2]2- anions. The statistical analysis of the multigrain SCXRD data and DFT-based electronic structure analysis well defined the chemical nature of the bonding in [C2N5]7- and [CN3]5- anions. This study provides a clear synthetic pathway to a new class of inorganic nitridocarbonates.
- 6 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (7) , 4174-4183
Compressed MgCl 2 Reveals Multiple Pathways to Cotunnite Structures
The phase transition sequences of MeX2 compounds (Me = metal or, more generally, an electropositive element), whose constituent atoms contribute 16 valence electrons per formula unit under high pressure, are of fundamental importance in materials science, high-pressure chemistry, and mineral physics. Here, we report the first observation of trigonal prismatic coordination in this class of materials, realized in magnesium dichloride MgCl2. We synthesized anhydrous MgCl2 by the direct reaction of elemental magnesium with carbon tetrachloride (CCl4) in laser-heated diamond anvil cells from 7(2) to 83(3) GPa. Single-crystal X-ray diffraction identified the known hP3-MgCl2 polymorph at 7(2) GPa, and two previously unknown high-pressure phases: an orthorhombic oP72-MgCl2 at 28(2) and 44(3) GPa, and a cotunnite-type oP12-MgCl2 at 64(3), 73(3), and 83(3) GPa. The oP72 phase features distorted MgCl6 trigonal prisms, while the oP12 phase adopts MgCl8 bicapped trigonal prisms. This sequence of hP3 → oP72 → oP12 reveals a complex pressure-induced structural transition from layered to three-dimensional frameworks. Ab initio calculations agree well with the experimental structural data, support the stability range of the new polymorphs, provide the equation of states, and reveal their electronic properties. Our findings demonstrate several transformation pathways by which MeX2 compounds evolve toward cotunnite-type structures under compression.
- 6 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (7) , 4174-4183
Compressed MgCl 2 Reveals Multiple Pathways to Cotunnite Structures
The phase transition sequences of MeX2 compounds (Me = metal or, more generally, an electropositive element), whose constituent atoms contribute 16 valence electrons per formula unit under high pressure, are of fundamental importance in materials science, high-pressure chemistry, and mineral physics. Here, we report the first observation of trigonal prismatic coordination in this class of materials, realized in magnesium dichloride MgCl2. We synthesized anhydrous MgCl2 by the direct reaction of elemental magnesium with carbon tetrachloride (CCl4) in laser-heated diamond anvil cells from 7(2) to 83(3) GPa. Single-crystal X-ray diffraction identified the known hP3-MgCl2 polymorph at 7(2) GPa, and two previously unknown high-pressure phases: an orthorhombic oP72-MgCl2 at 28(2) and 44(3) GPa, and a cotunnite-type oP12-MgCl2 at 64(3), 73(3), and 83(3) GPa. The oP72 phase features distorted MgCl6 trigonal prisms, while the oP12 phase adopts MgCl8 bicapped trigonal prisms. This sequence of hP3 → oP72 → oP12 reveals a complex pressure-induced structural transition from layered to three-dimensional frameworks. Ab initio calculations agree well with the experimental structural data, support the stability range of the new polymorphs, provide the equation of states, and reveal their electronic properties. Our findings demonstrate several transformation pathways by which MeX2 compounds evolve toward cotunnite-type structures under compression.
- Open Access
- 9 January 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (3) , 4280-4289
High-Pressure Synthesis and Structural Studies of La, Sm, Gd, and Dy Chlorides and Chloride Carbides
High-pressure synthesis provides unique pathways to materials with unprecedented structures and properties. Here we report the synthesis and structural characterization of novel rare-earth (La, Sm, Gd, Dy) chlorides, chloride carbides, and oxychloride phases obtained due to complex chemical reactions in diamond anvil cells after laser heating of rare-earth metals and NaCl at pressures of 39–127 GPa and temperatures of 2500–2800 K. Synchrotron single-crystal X-ray diffraction analysis allowed us to solve previously unknown crystal structures of binary (La2Cl, LaCl, LaCl3, DyCl) and ternary (DyNa2Cl5, Sm2ClC2, Gd2ClC2, Dy2ClC2, Sm19ClC18, Gd19ClC18, Dy5Cl3C, DyOCl) compounds. Significantly, we identified trans-polyacetylene-like carbon chains in lanthanide chloride carbides, a structural motif previously hypothesized but not observed experimentally. Our findings highlight the enhanced chemical reactivity of alkali halides under extreme conditions, uncovering novel chemical bonding and expanding the landscape of potential functional materials accessible through high-pressure synthesis.
- 9 January 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (3) , 4280-4289
Open AccessHigh-Pressure Synthesis and Structural Studies of La, Sm, Gd, and Dy Chlorides and Chloride Carbides
High-pressure synthesis provides unique pathways to materials with unprecedented structures and properties. Here we report the synthesis and structural characterization of novel rare-earth (La, Sm, Gd, Dy) chlorides, chloride carbides, and oxychloride phases obtained due to complex chemical reactions in diamond anvil cells after laser heating of rare-earth metals and NaCl at pressures of 39–127 GPa and temperatures of 2500–2800 K. Synchrotron single-crystal X-ray diffraction analysis allowed us to solve previously unknown crystal structures of binary (La2Cl, LaCl, LaCl3, DyCl) and ternary (DyNa2Cl5, Sm2ClC2, Gd2ClC2, Dy2ClC2, Sm19ClC18, Gd19ClC18, Dy5Cl3C, DyOCl) compounds. Significantly, we identified trans-polyacetylene-like carbon chains in lanthanide chloride carbides, a structural motif previously hypothesized but not observed experimentally. Our findings highlight the enhanced chemical reactivity of alkali halides under extreme conditions, uncovering novel chemical bonding and expanding the landscape of potential functional materials accessible through high-pressure synthesis.
- 18 September 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (39) , 35431-35437
High-Pressure Synthesis of Two Pb3(C3N6) Polymorphs Featuring Fully Deprotonated [C3N6]6– Melaminate Anions
Graphitic carbon nitride (g-C3N4), melamine, and their derivatives are of significant interest due to their diverse structural properties and potential applications in catalysis, energy storage, and materials science. In this study, two new compounds, both with the Pb3(C3N6) chemical formula, were synthesized at pressures of 40(2) to 48(2) GPa through a direct reaction between Pb, C and N2, or Pb and C6N4, in laser-heated diamond anvil cells. Their crystal structures were solved and refined using synchrotron single-crystal X-ray diffraction. The two Pb3(C3N6) polymorphs, namely tP48-Pb3(C3N6) and hP72-Pb3(C3N6), crystallize in the noncentrosymmetric space groups P4̅21m and P6122, respectively. Both solids contain the previously unknown hydrogen-free [C3N6]6- melaminate anion and were experimentally found recoverable to ambient conditions. Density functional theory calculations provide further insights into the structural and electronic properties, and reveal that both compounds are direct narrow band gap semiconductors.
- 18 September 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (39) , 35431-35437
High-Pressure Synthesis of Two Pb3(C3N6) Polymorphs Featuring Fully Deprotonated [C3N6]6– Melaminate Anions
Graphitic carbon nitride (g-C3N4), melamine, and their derivatives are of significant interest due to their diverse structural properties and potential applications in catalysis, energy storage, and materials science. In this study, two new compounds, both with the Pb3(C3N6) chemical formula, were synthesized at pressures of 40(2) to 48(2) GPa through a direct reaction between Pb, C and N2, or Pb and C6N4, in laser-heated diamond anvil cells. Their crystal structures were solved and refined using synchrotron single-crystal X-ray diffraction. The two Pb3(C3N6) polymorphs, namely tP48-Pb3(C3N6) and hP72-Pb3(C3N6), crystallize in the noncentrosymmetric space groups P4̅21m and P6122, respectively. Both solids contain the previously unknown hydrogen-free [C3N6]6- melaminate anion and were experimentally found recoverable to ambient conditions. Density functional theory calculations provide further insights into the structural and electronic properties, and reveal that both compounds are direct narrow band gap semiconductors.
- 2 September 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (36) , 32591-32599
High-Pressure Mg3Cl7 Synthesized in a Diamond Anvil Cell as a Polar Metal with Second-Harmonic Generation
Polar metals have attracted growing interest due to both their significance in fundamental science and their potential functionalities. Here, we report the discovery of a novel polar metal, magnesium chloride Mg3Cl7, in which the metallicity of the polar structure is uniquely driven by attractive halogen interactions. Mg3Cl7 was synthesized in laser-heated diamond anvil cells and observed at pressures of 28(2)-93(3) GPa. Synchrotron single-crystal X-ray diffraction revealed that the structure of the new compound has polar hexagonal space group P63mc, representing an example of a previously unknown anti-Th7Fe3 structure type. Measurements of the physical properties have shown that the material is a metallic conductor capable of emitting second-harmonic generation light. Ab initio calculations support experimental findings and reveal complex halogen-halogen interactions, anionic metallicity, anisotropic electronic structure, and the presence of Dirac and Weyl points at the Fermi level. Our findings broaden the family of polar metals, provide new insight into halogen bonding under extreme conditions, and offer a platform for further exploration of materials' unconventional electronic behavior.
- 2 September 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (36) , 32591-32599
High-Pressure Mg3Cl7 Synthesized in a Diamond Anvil Cell as a Polar Metal with Second-Harmonic Generation
Polar metals have attracted growing interest due to both their significance in fundamental science and their potential functionalities. Here, we report the discovery of a novel polar metal, magnesium chloride Mg3Cl7, in which the metallicity of the polar structure is uniquely driven by attractive halogen interactions. Mg3Cl7 was synthesized in laser-heated diamond anvil cells and observed at pressures of 28(2)-93(3) GPa. Synchrotron single-crystal X-ray diffraction revealed that the structure of the new compound has polar hexagonal space group P63mc, representing an example of a previously unknown anti-Th7Fe3 structure type. Measurements of the physical properties have shown that the material is a metallic conductor capable of emitting second-harmonic generation light. Ab initio calculations support experimental findings and reveal complex halogen-halogen interactions, anionic metallicity, anisotropic electronic structure, and the presence of Dirac and Weyl points at the Fermi level. Our findings broaden the family of polar metals, provide new insight into halogen bonding under extreme conditions, and offer a platform for further exploration of materials' unconventional electronic behavior.
- Open Access
- 16 June 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (31)
Hochdrucksynthese eines stickstoffreichen Y(N 5 ) 3 ·N 2 Pentazolats mit perowskitartiger Topologie
Zusammenfassung: Die Entdeckung und Stabilisierung des cyclo ‐N 5 ⁻ Anions hat eine neue Klasse von Pentazolatverbindungen eingeführt, die ein großes Potential als neuartige Materialien mit hoher Energiedichte pro Formeleinheit aufweisen. Dieses Potential kann im Weiteren durch Erhöhung des Pentazolat‐zu‐Metall‐Verhältnisses verbessert werden. Wir berichten in dieser Publikation von einer Hochdruck‐ und Hochtemperatursynthese zur Darstellung eines neuartigen Yttrium‐Pentazolat, Y(N 5 ) 3 ·N 2 , das ein außerordentlich großes Stickstoff‐zu‐Metall‐Verhältnis von 17:1 aufweist. Die Synthese von Y(N 5 ) 3 ·N 2 erfolgte ausgehend von elementarem Yttrium und Stickstoff durch laserinduziertes Heizen bei 3000 K und bei einem Druck von 125 GPa in einer Diamantstempelzelle. Die Kristallstruktur, die ein dreidimensionales Metallpentazolat‐Gerüst mit Stickstoffeinschlüssen aufweist, wurde durch in‐situ Synchrotron‐Einkristall‐Röntgenbeugung gelöst und verfeinert. Diese Struktur weist eine perowskitartige Topologie auf, wo die Pentazolatringe vereinfacht als eckenverknüpfte Oktaeder angesehen werden können, wo sich neutrale Stickstoffdimere in den Zentren der aufgespannten Oktaederlücken einlagern, während Yttriumatome verzerrte Kuboktaeder innerhalb des oktaedrischen 3D‐Rahmens besetzen. Theoretische Rechnungen mittels Dichtefunktionaltheorie bestätigen die experimentellen Ergebnisse und liefern weitere Einblicke in die Stabilität und Eigenschaften der synthetisierten Verbindung. Y(N 5 ) 3 ·N 2 ist das erste Beispiel für die Stabilisierung von drei Pentazolat‐Anionen pro Metallkation und übertrifft damit das zuvor erreichte Verhältnis von 1:1. Darüber hinaus schlagen wir eine neue Methode zur Strukturklassifizierung lösungsmittelfreier anorganischer Pentazolate vor, die auf der räumlichen Anordnung ihrer strukturellen Baueinheiten basiert und einen wichtigen Schritt für die systematische Einordnung von Pentazolaten sowie anderen Polynitriden darstellt.
- 16 June 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (31)
Open AccessHochdrucksynthese eines stickstoffreichen Y(N 5 ) 3 ·N 2 Pentazolats mit perowskitartiger Topologie
Zusammenfassung: Die Entdeckung und Stabilisierung des cyclo ‐N 5 ⁻ Anions hat eine neue Klasse von Pentazolatverbindungen eingeführt, die ein großes Potential als neuartige Materialien mit hoher Energiedichte pro Formeleinheit aufweisen. Dieses Potential kann im Weiteren durch Erhöhung des Pentazolat‐zu‐Metall‐Verhältnisses verbessert werden. Wir berichten in dieser Publikation von einer Hochdruck‐ und Hochtemperatursynthese zur Darstellung eines neuartigen Yttrium‐Pentazolat, Y(N 5 ) 3 ·N 2 , das ein außerordentlich großes Stickstoff‐zu‐Metall‐Verhältnis von 17:1 aufweist. Die Synthese von Y(N 5 ) 3 ·N 2 erfolgte ausgehend von elementarem Yttrium und Stickstoff durch laserinduziertes Heizen bei 3000 K und bei einem Druck von 125 GPa in einer Diamantstempelzelle. Die Kristallstruktur, die ein dreidimensionales Metallpentazolat‐Gerüst mit Stickstoffeinschlüssen aufweist, wurde durch in‐situ Synchrotron‐Einkristall‐Röntgenbeugung gelöst und verfeinert. Diese Struktur weist eine perowskitartige Topologie auf, wo die Pentazolatringe vereinfacht als eckenverknüpfte Oktaeder angesehen werden können, wo sich neutrale Stickstoffdimere in den Zentren der aufgespannten Oktaederlücken einlagern, während Yttriumatome verzerrte Kuboktaeder innerhalb des oktaedrischen 3D‐Rahmens besetzen. Theoretische Rechnungen mittels Dichtefunktionaltheorie bestätigen die experimentellen Ergebnisse und liefern weitere Einblicke in die Stabilität und Eigenschaften der synthetisierten Verbindung. Y(N 5 ) 3 ·N 2 ist das erste Beispiel für die Stabilisierung von drei Pentazolat‐Anionen pro Metallkation und übertrifft damit das zuvor erreichte Verhältnis von 1:1. Darüber hinaus schlagen wir eine neue Methode zur Strukturklassifizierung lösungsmittelfreier anorganischer Pentazolate vor, die auf der räumlichen Anordnung ihrer strukturellen Baueinheiten basiert und einen wichtigen Schritt für die systematische Einordnung von Pentazolaten sowie anderen Polynitriden darstellt.
- Open Access
- 16 June 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (31) , e202506334
High‐Pressure Synthesis of Nitrogen‐Rich Y(N 5 ) 3 ·N 2 Pentazolate with Perovskite Topology
The discovery and stabilization of the cyclo‐N 5 ⁻ anion have introduced a class of pentazolate compounds with significant potential as high‐energy‐density materials (HEDMs). This potential could be further enhanced by increasing the pentazolate‐to‐metal ratio. Here, we report the high‐pressure, high‐temperature synthesis and characterization of a novel yttrium pentazolate, Y(N 5 ) 3 ·N 2 , which exhibits an exceptionally high nitrogen‐to‐metal ratio of 17:1. Y(N 5 ) 3 ·N 2 was synthesized from yttrium and nitrogen by laser heating to 3000 K at 125 GPa in a diamond anvil cell. Its crystal structure, a 3D nitrogen‐inclusion metal‐pentazolate framework, was solved and refined in situ using synchrotron single‐crystal X‐ray diffraction. This structure demonstrates a perovskite topology, as pentazolate ring centers form octahedra connected via vertices, neutral nitrogen dimers are located at the centers of the octahedra, and yttrium atoms occupy distorted cuboctahedra within the octahedral 3D framework. Density functional theory (DFT) calculations corroborate the experimental findings and provide further insights into the stability and properties of the synthesized compound. Y(N 5 ) 3 ·N 2 is the first example of stabilizing three pentazolate anions per metal cation, surpassing the previously achieved 1:1 ratio. Additionally, we propose a centroid‐based structure typification for solvent‐free inorganic pentazolates, serving as an important step for further structural classification of pentazolates and other polynitrides.
- 16 June 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (31) , e202506334
Open AccessHigh‐Pressure Synthesis of Nitrogen‐Rich Y(N 5 ) 3 ·N 2 Pentazolate with Perovskite Topology
The discovery and stabilization of the cyclo‐N 5 ⁻ anion have introduced a class of pentazolate compounds with significant potential as high‐energy‐density materials (HEDMs). This potential could be further enhanced by increasing the pentazolate‐to‐metal ratio. Here, we report the high‐pressure, high‐temperature synthesis and characterization of a novel yttrium pentazolate, Y(N 5 ) 3 ·N 2 , which exhibits an exceptionally high nitrogen‐to‐metal ratio of 17:1. Y(N 5 ) 3 ·N 2 was synthesized from yttrium and nitrogen by laser heating to 3000 K at 125 GPa in a diamond anvil cell. Its crystal structure, a 3D nitrogen‐inclusion metal‐pentazolate framework, was solved and refined in situ using synchrotron single‐crystal X‐ray diffraction. This structure demonstrates a perovskite topology, as pentazolate ring centers form octahedra connected via vertices, neutral nitrogen dimers are located at the centers of the octahedra, and yttrium atoms occupy distorted cuboctahedra within the octahedral 3D framework. Density functional theory (DFT) calculations corroborate the experimental findings and provide further insights into the stability and properties of the synthesized compound. Y(N 5 ) 3 ·N 2 is the first example of stabilizing three pentazolate anions per metal cation, surpassing the previously achieved 1:1 ratio. Additionally, we propose a centroid‐based structure typification for solvent‐free inorganic pentazolates, serving as an important step for further structural classification of pentazolates and other polynitrides.