Roberto Briones-Gallardo

Durante más de 400 años, el distrito minero Cerro de San Pedro, ubicado en San Luis Potosí, México, ha generado una serie de residuos históricos, denominados pasivos ambientales, que constituyen un riesgo a la salud al contaminar el ambiente. Estos residuos depositados a un lado del arroyo de San Pedro comprenden cuantiosos volúmenes que al estar en contacto con el ambiente y por procesos de meteorización e intemperismo natural promueven la formación del drenaje ácido de mina. El objetivo de esta investigación fue evaluar la concentración de arsénico en sedimentos y suelos rizosféricos, así como a qué fracciones se encuentra preferentemente ligado. Lo anterior a través de cuatro metodologías; concentración total de arsénico, fraccionamiento del As que incluye siete fases: intercambiable, carbonatada, unida a oxihidróxidos de hierro y manganeso, unida a materia orgánica y la fase residual en suelos rizosféricos y sedimentos , fitoaccesibilidad en suelos rizosféricos del arroyo ubicado en Cerro de San Pedro y, finalmente, bioacumulación del arsénico en la especie de Asphodelus fitulosus la cual es nativa del sitio de estudio. Se obtuvo que las concentraciones de arsénico se encuentran por encima de las concentraciones de referencia de la normativa mexicana vigente. La fracción fitoaccesible está asociada a las primeras fracciones minerales solubles, como lo es el As ligado a agua meteórica, intercambiable y carbonatos, además que la especie A. fistulosus bioacumuló mayor arsénico en las raíces que en las hojas.

Fluorite (CaF₂) leaching and weathering (30 days) were conducted to measure fluoride dissolution in semiarid endemic soil and controlled synthetic solutions, and determining the main chemical species involved in these processes via atomic force microscopy (AFM), X-ray diffraction (XRD) and Scanning electron microscopy (SEM–EDS). Ecological health response in this system was assessed exposing Allium cepa bulbs to 10, 50, 100, 450, 550 and 950 mg CaF₂ kg⁻¹ soil to determine genotoxic damage, protein and systemic fluorine concentrations. Results indicated 3 cycles of passive-active fluorite dissolution enabling fluoride concentrations up to 164 mg L⁻¹ under endemic conditions; however, highest fluoride dissolution was 780 mg L⁻¹ for synthetic sulfates solution. Cyclic behavior was associated with the formation of ultrafine-sized calcite (CaCO₃)-like compounds. Fluorine concentrations ranged from 5 to 300 mg kg⁻¹ in vegetable tissue. The electrophoretic profiles revealed changes in the protein expression after 7, 15 and 25 days of exposure. Genotoxic damage rate was 50, 82 and 42% for these exposures (950 mg CaF₂ kg⁻¹ soil). The dose‒response curves of the normalized total protein content revealed the kinetics vegetable health damage rates for only 7 and 25 days. This behavior was best adjusted for only 7 days. These findings exhibited characteristics for initial damage and adaptation-recovery stage after 15 days. Environmental implications of these findings were further discussed. Graphical abstract

The present investigation introduces a novel approach, using As-Zn-Fe mining tailings (MT) and recycled bottle glass (cullet) to enable the manufacturing of a new glass for ornamental articles, with characteristics similar to those of soda–lime–silicate glass (SLS), and at the same time, immobilizing potentially toxic elements (PTEs) from mining tailings, which cause environmental pollution with severe risks to human health. The glass used was obtained from transparent glass bottles collected from urban waste, which were later washed to remove impurities and then crushed until they reached No. 70 mesh (212 μm) level; in the case of mining tailings, the sample used comes from the ore benefit process, with 96.8% of particles below the No. 50 mesh level (300 μm). Six mixtures were made by varying the composition of the mining tailings and glass, K₂CO₃ and H₃BO₃ as fluxes were also used in constant proportion. The mixtures were melted at 1370 °C, and later, the glass samples were cast on a steel plate at room temperature. The characteristics of the glasses were studied using thermal analysis (TA), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM). Likewise, their chemical resistance in acid and basic media and density were evaluated. The results unequivocally demonstrate the feasibility of manufacturing glasses with a light green color, the increase in the content of mining tailings increased the apparent T_g from 625 to 831 °C. Glasses with 17 and 21.3% MT presented lower density values due to a better-polymerized glass structure, attributed to the increase in SiO₂ and Al₂O₃ and the decrease in alkaline oxides, which allowed for the retention of PTEs in their structure.

In this work, TiO₂ spherical nanoparticles with a mean diameter of 10.08 nm (SD = 4.54 nm) were synthesized using Aloe vera extract. Rutile, brookite, and anatase crystalline phases were identified. The surface morphology of a carbon paste electrode does not change in the presence of nanoparticles; however, the surface chemical composition does. The voltammetric response to dicresyl dithiophosphate was higher when the electrode was modified with TiO₂ nanoparticles. After an electrochemical response study from pH 1.0 to 12.0, pH 7.0 was selected for the electroanalysis. The electroactive area of the modified sensor was 0.036 cm², while it was 0.026 cm² for the bare electrode. The oxidation process showed mixed adsorption-diffusion control. The charge transfer resistance of the modified sensor (530.1 Ω, SD = 4.08 Ω) was much lower than that of the bare electrode (4298 Ω, SD = 8.53 Ω). The linear quantitative range by square wave voltammetry was from 5 to 150 μmol/L, with a limit of detection of 1.89 μmol/L and a limit of quantification of 6.26 μmol/L under optimal pulse parameters of 50 Hz frequency, 1 mV step potential, and 25 mV pulse amplitude. The sensor response was repeatable and reproducible over 30 days. The results on real flotation and synthetically contaminated soil samples were statistically equivalent to those obtained by UV-vis spectrophotometry. A dithiocarbamate showed an interfering effect on the sensor response to dithiophosphate.

Hydrogen, electric energy production, and metal toxic bioremediation are some of the biotechnological applications of sulfate-reducing organisms, which potentially depend on the sulfide produced. In this study, offshore of Yucatan, the capacity to produce hydrogen sulfide using microbial consortia from marine sediment (SC469, PD102, SD636) in batch reactors was evaluated. Kinetic tests were characterized by lactate oxidation to acetate, propionate, CO₂ and methane. The inoculum SC469, located in open-ocean, differed strongly in microbial diversity and showed better performance in substrate utilization with the highest hydrogen sulfide production (246 mmolg⁻¹ VSS) at a specific hydrogen sulfide rate of 113 mmol g⁻¹ VSS d⁻¹ with a 0.79 molar ratio of sulfate/lactate. Sulfate-reducing microbial consortia enriched in the laboratory from marine sediments collected offshore in Yucatan and with a moderate eutrophication index, differed strongly in microbial diversity with loss of microorganisms with greater capacity for degradation of organic macromolecules. The sulfate-reducing microorganisms were characterized using Illumina MiSeq technology and were mainly Desulfomicrobium, Clostridium and Desulfobacter.

Mine wastes from the La Aurora mine in the state of Guanajuato were generated by the flotation process and placed in four tailing dumps on the local stream while the plant operated. Given that these wastes contain toxic elements, it is important to establish their impact on the quality of several surrounding natural sources of water that are considered potential drinking water supplies. This study identified four water source types, in which the contents of arsenic (As), mercury (Hg), and thallium (Tl) were exceeded, according to international guideline values for drinking water quality. The first type of aqueous sample corresponded to leachates produced by rainwater infiltration in tailings and water–mineral waste interactions. The second type corresponded to surface water along the Xichú and La Laja Streams, and the third and fourth types involved two groundwater well samples and spring samples, respectively. The Chiquito Stream was used as a reference area that had not been impacted by the mine wastes. The isotopic signatures associated with δ³⁴S_sulfate and δ¹⁸O_sulfate compositions from the El Ojo de Agua spring are similar to those of the Santa María River and are different from those of the mine waste leachates. This study shows evidence of the presence of As in the El Ojo de Agua spring, which results from dissolution of secondary mineral phases that were produced by alteration of the mine wastes, which then migrated along the Xichú Stream system until reaching the spring. These As-bearing fine particles are prone to dissolution when in contact with this water source. Principal component analysis revealed that the observed As, Tl, and Hg can be attributed to weathering of the mine wastes. However, the results suggest that a natural contribution of these elements could be associated with rainwater–igneous rock interactions.

Nama aff. stenophylla plants grow on mining waste abandoned 100 years ago, exposed to high concentrations of heavy metals. Accumulation of heavy metals in plant biomass has been related to the phyto-accessible fractions of these, so we assessed the effect of those heavy metals in different concentrations on the germination and development of seedlings. The seed traits were characterized with optical and scanning electron microscope. The seeds were assessed for dormancy by pre-germinative treatments, germination percentage, tolerance index regarding heavy metals, and the elongation of seedlings under three concentrations of arsenic (As), cadmium (Cd), Iron (Fe), lead (Pb), and zinc (Zn) (phyto-accessible [Ph], five times higher [Hi] and lower [Lo]). The seeds have no dormancy, and the heavy metals did not affect the embryo. Pb, Cd, and As, affected the germination percentage more (p < 0.005). The treatments that most affected seedling elongation were Zn [Hi], Cd [Hi], Pb [Lo], Zn [Ph], Pb [Hi], Zn [Lo] (p < 0.005). The seedlings cells alterations were associated with the reduction in length, although larger cortical cells may be due to heavy metal compartmentalization in vacuoles. The seeds and seedlings showed tolerance to high concentrations of Fe and As, and to phyto-accessible of As, Cd, Pb, and Fe.