Debra A. Callahan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Debra A. Callahan has a total of 529 co-authors. Here are the top co-authors by number of shared publications:
- O. L. Landen
Lawrence Livermore National Laboratory 1 , Livermore, California 94550
26 shared publications - Omar A. Hurricane
Lawrence Livermore National Laboratory
21 shared publications - Alex B. Zylstra
Pacific Fusion Corporation 3 , Fremont, California 94538
20 shared publications M. J. Edwards
Lawrence Livermore National Laboratory 1 , P.O. Box 808, Livermore, California 94551-0808, USA
20 shared publicationsA. Pak
Lawrence Livermore National Laboratory 1 , P.O. Box 808, Livermore, California 94551-0808, USA
19 shared publicationsT. Ma
Lawrence Livermore National Laboratory , Livermore, California 94550, USA
18 shared publications
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (11)
A probabilistic model of laser drive asymmetries applied to an inertial fusion energy reactor design
In the pursuit of the realization of an inertial fusion energy reactor, directly driving the fuel capsules with laser beams is a compelling design choice due to the more efficient energy coupling compared to indirect drive. However, the laser illumination symmetry necessary for achieving ignition and gain imposes stringent accuracy requirements on the laser system. We present a reactor beam port configuration in which multiple beams per port are used to dynamically shift power between different beam spot sizes as the capsule implodes, reducing the laser light blowby while maintaining uniform illumination. A probabilistic model has been developed to directly propagate the laser drive modes from stochastic system errors (target offset, beam pointing, and power imbalance) without the need for Monte Carlo simulations. This model constitutes a useful tool for the broad optimization of the laser beam geometrical configuration of future facilities.
- 1 November 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (11)
A probabilistic model of laser drive asymmetries applied to an inertial fusion energy reactor design
In the pursuit of the realization of an inertial fusion energy reactor, directly driving the fuel capsules with laser beams is a compelling design choice due to the more efficient energy coupling compared to indirect drive. However, the laser illumination symmetry necessary for achieving ignition and gain imposes stringent accuracy requirements on the laser system. We present a reactor beam port configuration in which multiple beams per port are used to dynamically shift power between different beam spot sizes as the capsule implodes, reducing the laser light blowby while maintaining uniform illumination. A probabilistic model has been developed to directly propagate the laser drive modes from stochastic system errors (target offset, beam pointing, and power imbalance) without the need for Monte Carlo simulations. This model constitutes a useful tool for the broad optimization of the laser beam geometrical configuration of future facilities.
- Open Access
- 1 May 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (5)
A fast ignition isochoric direct drive compression design with a 527 nm wavelength
A 1D simulation design study for fast ignition implosions using the second harmonic of a Nd:glass laser (527 nm) is presented. Designs are obtained by combining particle swarm optimization [Kennedy and Eberhart, Proceedings of International Conference on Neural Networks (ICNN'95), Perth, WA, Australia (IEEE, 1995), Vol. 4, pp. 1942–1948] with radiation hydrodynamic simulations using the code MULTI-IFE [Ramis and Meyer-ter-Vehn, Comput. Phys. Commun. 203, 226 (2016)]. Considerations of limits like the maximum laser intensity, the laser power contrast, and the central gas density are incorporated into the design iterations. A subset of the simulation results is verified with the code DUED [Atzeni et al., Comput. Phys. Commun. 169, 153 (2005)]. The obtained design features a low absorption of the incident laser because outer parts of the beam are being refracted around the imploding shell which lowers the absorption. A single stage of laser beam zooming substantially increases the absorption while decreasing the laser power contrast, the compression energy, and the incident intensity. A comparison to compression designs in literature is drawn, which reveals the efficiency of the described approach.
- 1 May 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (5)
Open AccessA fast ignition isochoric direct drive compression design with a 527 nm wavelength
A 1D simulation design study for fast ignition implosions using the second harmonic of a Nd:glass laser (527 nm) is presented. Designs are obtained by combining particle swarm optimization [Kennedy and Eberhart, Proceedings of International Conference on Neural Networks (ICNN'95), Perth, WA, Australia (IEEE, 1995), Vol. 4, pp. 1942–1948] with radiation hydrodynamic simulations using the code MULTI-IFE [Ramis and Meyer-ter-Vehn, Comput. Phys. Commun. 203, 226 (2016)]. Considerations of limits like the maximum laser intensity, the laser power contrast, and the central gas density are incorporated into the design iterations. A subset of the simulation results is verified with the code DUED [Atzeni et al., Comput. Phys. Commun. 169, 153 (2005)]. The obtained design features a low absorption of the incident laser because outer parts of the beam are being refracted around the imploding shell which lowers the absorption. A single stage of laser beam zooming substantially increases the absorption while decreasing the laser power contrast, the compression energy, and the incident intensity. A comparison to compression designs in literature is drawn, which reveals the efficiency of the described approach.
- 17 April 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 113 (4) , 045212
Implosion of cone-in-shell targets for direct-drive fast ignition
The laser direct-drive fast ignition scheme is a candidate for inertial fusion energy reactors. The scheme promises higher fusion gains (fusion energy divided by laser energy) than with conventional central hot-spot ignition. For a particle beam (electrons or ions) to reach and heat the compressed fuel, a reentrant cone is mounted in the fuel shell. The cone, which is made from higher Z material, has a significant impact on the implosion of the fuel shell. This work presents two-dimensional radiation hydrodynamic simulations with the flash code of the laser direct-drive compression of reactor-scale cone-in-shell targets with 2.7mg of deuterium-tritium fuel. The simulations highlight the different stages of the implosion leading to a nonspherical fuel shape at stagnation. The implosion also significantly affects the cone tip and the extreme high pressure in the hot spot creates a strong shock wave that crushes the cone tip. A comprehensive parameter study is presented with different cone geometries, different cone materials (gold, copper, and aluminum) and laser drive asymmetry to study the fuel assembly in front of the cone tip and the shock formation in the cone tip material. For the reactor-scale capsule design we analyzed, we find that a 30^{∘} half cone angle made from copper, and a wall thickness of about 200µm provides a good trade-off in terms of fuel assembly, cone tip survivability, and minimization of travel distance for the particle beam through the dense plasma. The results indicate that it is feasible to compress fuel to the required density of 400g/cm^{3} using a laser pulse energy of approximately 1.5MJ. This opens the potential for achieving high energy gains with moderate pulse energies, envisioning massive energy production through laser fusion.
- 17 April 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 113 (4) , 045212
Implosion of cone-in-shell targets for direct-drive fast ignition
The laser direct-drive fast ignition scheme is a candidate for inertial fusion energy reactors. The scheme promises higher fusion gains (fusion energy divided by laser energy) than with conventional central hot-spot ignition. For a particle beam (electrons or ions) to reach and heat the compressed fuel, a reentrant cone is mounted in the fuel shell. The cone, which is made from higher Z material, has a significant impact on the implosion of the fuel shell. This work presents two-dimensional radiation hydrodynamic simulations with the flash code of the laser direct-drive compression of reactor-scale cone-in-shell targets with 2.7mg of deuterium-tritium fuel. The simulations highlight the different stages of the implosion leading to a nonspherical fuel shape at stagnation. The implosion also significantly affects the cone tip and the extreme high pressure in the hot spot creates a strong shock wave that crushes the cone tip. A comprehensive parameter study is presented with different cone geometries, different cone materials (gold, copper, and aluminum) and laser drive asymmetry to study the fuel assembly in front of the cone tip and the shock formation in the cone tip material. For the reactor-scale capsule design we analyzed, we find that a 30^{∘} half cone angle made from copper, and a wall thickness of about 200µm provides a good trade-off in terms of fuel assembly, cone tip survivability, and minimization of travel distance for the particle beam through the dense plasma. The results indicate that it is feasible to compress fuel to the required density of 400g/cm^{3} using a laser pulse energy of approximately 1.5MJ. This opens the potential for achieving high energy gains with moderate pulse energies, envisioning massive energy production through laser fusion.
- Open Access
- 1 February 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (2)
Particle swarm optimization of 1D isochoric compression designs for fast ignition
A method to study isochoric compression to mass densities relevant for direct-drive fast ignition schemes is presented. The method is based on the combination of one-dimensional radiation-hydrodynamic simulations using the code MULTI-IFE [Ramis and Meyer-ter Vehn, Comput. Phys. Commun. 203, 226 (2016)] and a particle swarm optimization technique [Kennedy and Eberhart, in Proceedings of ICNN'95 - International Conference on Neural Networks (IEEE, Perth, WA, Australia, 1995), Vol. 4, pp. 1942–1948]. The compression of the fuel is optimized through variations of the incident temporal laser power profiles. Uniform mass density profiles are achieved by using appropriate objective functions that allow comparisons between the fuel assemblies obtained from simulations. Several objective functions were created and evaluated on their merits to yield isochoric compression assembly. Ultimately, such a profile is presented in conjunction with the technique to achieve it. A useful objective function is calculating the deviation of the simulated mass density profile from the ideal uniform mass density profile over a volume of the compressed target up to the radial position of the outgoing shock wave.
- 1 February 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (2)
Open AccessParticle swarm optimization of 1D isochoric compression designs for fast ignition
A method to study isochoric compression to mass densities relevant for direct-drive fast ignition schemes is presented. The method is based on the combination of one-dimensional radiation-hydrodynamic simulations using the code MULTI-IFE [Ramis and Meyer-ter Vehn, Comput. Phys. Commun. 203, 226 (2016)] and a particle swarm optimization technique [Kennedy and Eberhart, in Proceedings of ICNN'95 - International Conference on Neural Networks (IEEE, Perth, WA, Australia, 1995), Vol. 4, pp. 1942–1948]. The compression of the fuel is optimized through variations of the incident temporal laser power profiles. Uniform mass density profiles are achieved by using appropriate objective functions that allow comparisons between the fuel assemblies obtained from simulations. Several objective functions were created and evaluated on their merits to yield isochoric compression assembly. Ultimately, such a profile is presented in conjunction with the technique to achieve it. A useful objective function is calculating the deviation of the simulated mass density profile from the ideal uniform mass density profile over a volume of the compressed target up to the radial position of the outgoing shock wave.
- Open Access
- 1 December 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (12)
A prospectus on laser-driven inertial fusion as an energy source
Recent historic results in inertial fusion on the National Ignition Facility (NIF) laser have now demonstrated a fusion gain (fusion energy divided by laser driver energy) greater than one [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)]. These achievements now demonstrate the conditions for fusion ignition can be achieved in the Laboratory and serve as a physics proof of principle for inertial fusion energy. However, there are still significant challenges to take the NIF result and create a fusion energy power plant. Over the last few years, several private fusion companies have been formed with the goal of producing a fusion pilot power plant. We discuss lessons learned from NIF and how those lessons can impact plans for inertial fusion energy. As excitement and funding for fusion energy is increased, we will need to expand the fusion workforce which is an excellent opportunity to increase the diversity, equity, inclusion, and accessibility of our field as well as forming partnerships between private fusion companies and public universities and National Laboratories.
- 1 December 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (12)
Open AccessA prospectus on laser-driven inertial fusion as an energy source
Recent historic results in inertial fusion on the National Ignition Facility (NIF) laser have now demonstrated a fusion gain (fusion energy divided by laser driver energy) greater than one [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)]. These achievements now demonstrate the conditions for fusion ignition can be achieved in the Laboratory and serve as a physics proof of principle for inertial fusion energy. However, there are still significant challenges to take the NIF result and create a fusion energy power plant. Over the last few years, several private fusion companies have been formed with the goal of producing a fusion pilot power plant. We discuss lessons learned from NIF and how those lessons can impact plans for inertial fusion energy. As excitement and funding for fusion energy is increased, we will need to expand the fusion workforce which is an excellent opportunity to increase the diversity, equity, inclusion, and accessibility of our field as well as forming partnerships between private fusion companies and public universities and National Laboratories.
- Open Access
- 1 July 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (7)
Design of first experiment to achieve fusion target gain > 1
A decades-long quest to achieve fusion energy target gain and ignition in a controlled laboratory experiment, dating back to 1962, has been realized at the National Ignition Facility (NIF) on December 5, 2022 [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)] where an imploded pellet of deuterium and tritium (DT) fuel generated more fusion energy (3.15 MJ) than laser energy incident on the target (2.05 MJ). In these experiments, laser beams incident on the inside of a cylindrical can (Hohlraum) generate an intense ∼3 × 106 million degree x-ray radiation bath that is used to spherically implode ∼2 mm diameter pellets containing frozen deuterium and tritium. The maximum fusion energy produced in this configuration to date is 3.88 MJ using 2.05 MJ of incident laser energy and 5.2 MJ using 2.2 MJ of incident laser energy, producing a new record target gain of ∼2.4×. This paper describes the physics (target and laser) design of this platform and follow-on experiments that show increased performance. We show robust megajoule fusion energy output using this design as well as explore design modification using radiation hydrodynamic simulations benchmarked against experimental data, which can further improve the performance of this platform.
- 1 July 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (7)
Open AccessDesign of first experiment to achieve fusion target gain > 1
A decades-long quest to achieve fusion energy target gain and ignition in a controlled laboratory experiment, dating back to 1962, has been realized at the National Ignition Facility (NIF) on December 5, 2022 [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)] where an imploded pellet of deuterium and tritium (DT) fuel generated more fusion energy (3.15 MJ) than laser energy incident on the target (2.05 MJ). In these experiments, laser beams incident on the inside of a cylindrical can (Hohlraum) generate an intense ∼3 × 106 million degree x-ray radiation bath that is used to spherically implode ∼2 mm diameter pellets containing frozen deuterium and tritium. The maximum fusion energy produced in this configuration to date is 3.88 MJ using 2.05 MJ of incident laser energy and 5.2 MJ using 2.2 MJ of incident laser energy, producing a new record target gain of ∼2.4×. This paper describes the physics (target and laser) design of this platform and follow-on experiments that show increased performance. We show robust megajoule fusion energy output using this design as well as explore design modification using radiation hydrodynamic simulations benchmarked against experimental data, which can further improve the performance of this platform.
- Top Cited PapersOpen Access
- 5 February 2024
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 132 (6) , 065103
Energy Principles of Scientific Breakeven in an Inertial Fusion Experiment
Fusion “scientific breakeven” (i.e., unity target gain , total fusion energy out laser energy input) has been achieved for the first time (here, ). This Letter reports on the physics principles of the design changes that led to the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce target gain greater than unity and exceeded the previously obtained conditions needed for ignition by the Lawson criterion. Key elements of the success came from reducing “coast time” (the time duration between the end of the laser pulse and implosion peak compression) and maximizing the internal energy delivered to the “hot spot” (the yield producing part of the fusion fuel). The link between coast time and maximally efficient conversion of kinetic energy into internal energy is explained. The energetics consequences of asymmetry and hydrodynamic-induced mixing were part of high-yield big radius implosion design experimental and design strategy. Herein, it is shown how asymmetry and mixing consolidate into one key relationship. It is shown that mixing distills into a kinetic energy cost similar to the impact of implosion asymmetry, shifting the threshold for ignition to higher implosion kinetic energy—a factor not normally included in most statements of the generalized Lawson criterion, but the key needed modifications clearly emerge.- 5 February 2024
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 132 (6) , 065103
Top Cited PapersOpen AccessEnergy Principles of Scientific Breakeven in an Inertial Fusion Experiment
Fusion “scientific breakeven” (i.e., unity target gain , total fusion energy out laser energy input) has been achieved for the first time (here, ). This Letter reports on the physics principles of the design changes that led to the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce target gain greater than unity and exceeded the previously obtained conditions needed for ignition by the Lawson criterion. Key elements of the success came from reducing “coast time” (the time duration between the end of the laser pulse and implosion peak compression) and maximizing the internal energy delivered to the “hot spot” (the yield producing part of the fusion fuel). The link between coast time and maximally efficient conversion of kinetic energy into internal energy is explained. The energetics consequences of asymmetry and hydrodynamic-induced mixing were part of high-yield big radius implosion design experimental and design strategy. Herein, it is shown how asymmetry and mixing consolidate into one key relationship. It is shown that mixing distills into a kinetic energy cost similar to the impact of implosion asymmetry, shifting the threshold for ignition to higher implosion kinetic energy—a factor not normally included in most statements of the generalized Lawson criterion, but the key needed modifications clearly emerge. - Open Access
- 1 July 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (7)
First bromine doped cryogenic implosion at the National Ignition Facility
We report on the first experiment dedicated to the study of nuclear reactions on dopants in a cryogenic capsule at the National Ignition Facility (NIF). This was accomplished using bromine doping in the inner layers of the CH ablator of a capsule identical to that used in the NIF shot N140520. The capsule was doped with 3 × 1016 bromine atoms. The doped capsule shot, N170730, resulted in a DT yield that was 2.6 times lower than the undoped equivalent. The Radiochemical Analysis of Gaseous Samples (RAGS) system was used to collect and detect 79Kr atoms resulting from energetic deuteron and proton ion reactions on 79Br. RAGS was also used to detect 13N produced dominantly by knock-on deuteron reactions on the 12C in the ablator. High-energy reaction-in-flight neutrons were detected via the 209Bi(n,4n)206Bi reaction, using bismuth activation foils located 50 cm outside of the target capsule. The robustness of the RAGS signals suggests that the use of nuclear reactions on dopants as diagnostics is quite feasible.
- 1 July 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (7)
Open AccessFirst bromine doped cryogenic implosion at the National Ignition Facility
We report on the first experiment dedicated to the study of nuclear reactions on dopants in a cryogenic capsule at the National Ignition Facility (NIF). This was accomplished using bromine doping in the inner layers of the CH ablator of a capsule identical to that used in the NIF shot N140520. The capsule was doped with 3 × 1016 bromine atoms. The doped capsule shot, N170730, resulted in a DT yield that was 2.6 times lower than the undoped equivalent. The Radiochemical Analysis of Gaseous Samples (RAGS) system was used to collect and detect 79Kr atoms resulting from energetic deuteron and proton ion reactions on 79Br. RAGS was also used to detect 13N produced dominantly by knock-on deuteron reactions on the 12C in the ablator. High-energy reaction-in-flight neutrons were detected via the 209Bi(n,4n)206Bi reaction, using bismuth activation foils located 50 cm outside of the target capsule. The robustness of the RAGS signals suggests that the use of nuclear reactions on dopants as diagnostics is quite feasible.
- Open Access
- 1 March 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (3)
Control of low-mode drive asymmetry in an efficient long-pulse low gas-fill density Hohlraum
Laser-driven Hohlraums filled with gas at lower densities (<0.6 mg/cc) have higher efficiency compared to original ≥ 0.96 mg/cc fill because of reduced backscatter losses [Hall et al., Phys. Plasmas 24, 052706 (2017)]. However, using low-density filled Hohlraums with longer drive required for lower adiabat implosions, and hence potentially higher inertial confinement fusion gain designs, has been challenging since the Hohlraum wall blow-off is less tamped, thus altering the laser beam absorption regions and drive symmetry. A series of NIF experiments using optimized pulse shaping, beam pointing, and temporal phasing have demonstrated, through imaging of the Hohlraum and capsule dynamics, that a symmetric implosion using a 14-ns low-adiabat drive pulse {2× longer than high-density-carbon ablator designs using low gas-fill density Hohlraums [Divol et al., Phys. Plasmas 24, 056309 (2017)]} is possible in a low backscatter loss 0.45 mg/cc He-filled Hohlraum. The ingress of the Hohlraum walls was mitigated by revisiting the adiabat-shaped design [Clark et al., Phys. Plasmas 21, 112705 (2014)] that uses a low-power (1 TW) trough that delays the wall expansion. Low-mode P2 and P4 drive asymmetry swings caused by the drift of the laser spots were essentially zeroed out by employing temporal beam phasing between cones of beams [Turner et al., Phys. Plasmas 7, 333 (2000)]. The results also indicate an improved coupling efficiency of ∼30% compared to an earlier design using higher density filled Hohlraums and pave the way for revisiting low-adiabat, high convergence drives using CH ablators.
- 1 March 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (3)
Open AccessControl of low-mode drive asymmetry in an efficient long-pulse low gas-fill density Hohlraum
Laser-driven Hohlraums filled with gas at lower densities (<0.6 mg/cc) have higher efficiency compared to original ≥ 0.96 mg/cc fill because of reduced backscatter losses [Hall et al., Phys. Plasmas 24, 052706 (2017)]. However, using low-density filled Hohlraums with longer drive required for lower adiabat implosions, and hence potentially higher inertial confinement fusion gain designs, has been challenging since the Hohlraum wall blow-off is less tamped, thus altering the laser beam absorption regions and drive symmetry. A series of NIF experiments using optimized pulse shaping, beam pointing, and temporal phasing have demonstrated, through imaging of the Hohlraum and capsule dynamics, that a symmetric implosion using a 14-ns low-adiabat drive pulse {2× longer than high-density-carbon ablator designs using low gas-fill density Hohlraums [Divol et al., Phys. Plasmas 24, 056309 (2017)]} is possible in a low backscatter loss 0.45 mg/cc He-filled Hohlraum. The ingress of the Hohlraum walls was mitigated by revisiting the adiabat-shaped design [Clark et al., Phys. Plasmas 21, 112705 (2014)] that uses a low-power (1 TW) trough that delays the wall expansion. Low-mode P2 and P4 drive asymmetry swings caused by the drift of the laser spots were essentially zeroed out by employing temporal beam phasing between cones of beams [Turner et al., Phys. Plasmas 7, 333 (2000)]. The results also indicate an improved coupling efficiency of ∼30% compared to an earlier design using higher density filled Hohlraums and pave the way for revisiting low-adiabat, high convergence drives using CH ablators.
- 1 March 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (3)
Reaching a burning plasma and ignition using smaller capsules/Hohlraums, higher radiation temperatures, and thicker ablator/ice on the national ignition facility
In indirect-drive implosions, the final core hot spot energy and pressure and, hence, neutron yield attainable in 1D increase with increasing laser peak power and, hence, radiation drive temperature at the fixed capsule and Hohlraum size. We present simple analytic scalings validated by 1D simulations that quantify the improvement in performance and use this to explain existing data and simulation trends. Extrapolating to the 500 TW National Ignition Facility peak power limit in a low gas-fill 5.4 mm diameter Hohlraum based on existing high adiabat implosion data at 400 TW, 1.3 MJ and 1 × 1016 yield, we find that a 2–3 × 1017 yield (0.5–0.7 MJ) is plausible using only 1.8 MJ of laser energy. Based on existing data varying deuterium–tritium (DT) fuel thickness and dopant areal density, further improvements should be possible by increasing DT fuel areal density, and hence confinement time and yield amplification.
- 1 March 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (3)
Reaching a burning plasma and ignition using smaller capsules/Hohlraums, higher radiation temperatures, and thicker ablator/ice on the national ignition facility
In indirect-drive implosions, the final core hot spot energy and pressure and, hence, neutron yield attainable in 1D increase with increasing laser peak power and, hence, radiation drive temperature at the fixed capsule and Hohlraum size. We present simple analytic scalings validated by 1D simulations that quantify the improvement in performance and use this to explain existing data and simulation trends. Extrapolating to the 500 TW National Ignition Facility peak power limit in a low gas-fill 5.4 mm diameter Hohlraum based on existing high adiabat implosion data at 400 TW, 1.3 MJ and 1 × 1016 yield, we find that a 2–3 × 1017 yield (0.5–0.7 MJ) is plausible using only 1.8 MJ of laser energy. Based on existing data varying deuterium–tritium (DT) fuel thickness and dopant areal density, further improvements should be possible by increasing DT fuel areal density, and hence confinement time and yield amplification.