Belkacem Belabbas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Belkacem Belabbas has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Tayeb Allaoui
Laboratory of L2GEGIUniversity of Tiaret Tiaret Algeria
3 shared publications- Mohamed Metwally Mahmoud
VSB—Technical University of Ostrava
2 shared publications Mohamed Tadjine
Ecole Nationale Polytechnique Algiers
2 shared publications- Mouloud Denai
School of Physics, Engineering and Computer Science, University of Hertfordshire, Hatfield AL10 9AB, UK
2 shared publications - Tayeb Allaoui
University of Tiaret
2 shared publications - Yasser Diab
Nantes Atlantique Electrical Energy Research Institute (IREENA, UR 4642) Nantes Université Fr Saint‐Nazaire France
2 shared publications
Latest Publications
- 23 December 2025
- Published by Wiley in Energy Storage
- Vol. 8 (1)
Electrothermal Modeling and Optimization of a Supercapacitor‐Based Braking Energy Recovery System to Enhance Efficiency and Thermal Stability in Electric Vehicles
A major challenge in electric public transport is the loss of kinetic energy during dynamic braking, which reduces overall energy efficiency and increases operational costs. This study addresses the challenge of dynamic braking energy losses by employing a Supercapacitor Energy Storage System (SESS) capable of recovering and reusing braking energy. Supercapacitors (SCs) are employed to significantly enhance the power performance of Electric Vehicles (EVs), including trolleybuses and tramways. This study investigates the modeling, optimization, and thermal analysis of SESS. A detailed dynamic model of the trolleybus traction system is developed using the PSIM (Power Simulation) environment. The model emphasizes key components such as Induction Motors (IMs), power converters, controllers, and supercapacitors to accurately represent both electrical and thermal behavior. Various control strategies ranging from scalar constant Voltage‐to‐Frequency (V/f) to variable frequency approaches are explored to optimize the capture and utilization of braking energy. The sizing of the SESS is optimized by considering the vehicle's kinetic energy and the operational parameters of the supercapacitors. The supercapacitor's nonlinear electrical behavior and temperature sensitivity are characterized experimentally, providing critical data to establish the electrothermal model. The evaluation of the system, including its power electronics, demonstrates that it operates within safe thermal limits without the need for auxiliary cooling mechanisms. The integration of supercapacitors not only improves energy efficiency and extends vehicle range but also ensures the thermal stability of the storage system, as confirmed by simulation results. This study highlights the importance of accurate electrothermal modeling for reliable system operation and provides essential design insights for electric vehicle braking systems. Ultimately, the work contributes to enhancing energy recovery and management in trolleybuses, supporting the development of more sustainable public transportation systems.
- 23 December 2025
- Published by Wiley in Energy Storage
- Vol. 8 (1)
Electrothermal Modeling and Optimization of a Supercapacitor‐Based Braking Energy Recovery System to Enhance Efficiency and Thermal Stability in Electric Vehicles
A major challenge in electric public transport is the loss of kinetic energy during dynamic braking, which reduces overall energy efficiency and increases operational costs. This study addresses the challenge of dynamic braking energy losses by employing a Supercapacitor Energy Storage System (SESS) capable of recovering and reusing braking energy. Supercapacitors (SCs) are employed to significantly enhance the power performance of Electric Vehicles (EVs), including trolleybuses and tramways. This study investigates the modeling, optimization, and thermal analysis of SESS. A detailed dynamic model of the trolleybus traction system is developed using the PSIM (Power Simulation) environment. The model emphasizes key components such as Induction Motors (IMs), power converters, controllers, and supercapacitors to accurately represent both electrical and thermal behavior. Various control strategies ranging from scalar constant Voltage‐to‐Frequency (V/f) to variable frequency approaches are explored to optimize the capture and utilization of braking energy. The sizing of the SESS is optimized by considering the vehicle's kinetic energy and the operational parameters of the supercapacitors. The supercapacitor's nonlinear electrical behavior and temperature sensitivity are characterized experimentally, providing critical data to establish the electrothermal model. The evaluation of the system, including its power electronics, demonstrates that it operates within safe thermal limits without the need for auxiliary cooling mechanisms. The integration of supercapacitors not only improves energy efficiency and extends vehicle range but also ensures the thermal stability of the storage system, as confirmed by simulation results. This study highlights the importance of accurate electrothermal modeling for reliable system operation and provides essential design insights for electric vehicle braking systems. Ultimately, the work contributes to enhancing energy recovery and management in trolleybuses, supporting the development of more sustainable public transportation systems.
- Open Access
- 31 January 2025
- Published by ASCEE Publications in International Journal of Robotics and Control Systems
- Vol. 5 (2) , 990-1005
Enhancement of Transient Stability and Power Quality in Grid-Connected PV Systems Using SMES
One of the main issues with grid-connected distributed energy systems, including photovoltaic (PV) systems, is the DC bus voltage's instability during load fluctuations and power line short circuits. This paper attempts to address this problem and proposes to use superconducting magnetic energy storage (SMES) to stabilize the voltage of the DC link and improve the power quality and transient stability of the power system. The investigated configuration components are PV cells, boost converter, chopper, SMES, three level inverter (NPC), filter, grid, and load. MATLAB / Sim Power System is used to test the performance of a SMES in order to ensure the balance of the DC bus voltage of a PV system connected to the grid. Several scenarios were considered to show the performance and benefits of combining a SMES with the PV system. The outcomes of the examined scenarios (fault and load change) demonstrate the precision of the employed control systems, maintaining the DC voltage at acceptable levels (≈500 V), enhances the structure stability, and improving power quality (GPV THD = 4.34). Finally, it can be concluded that the proposed configuration will help in achieving high penetration scenarios of PV systems.
- 31 January 2025
- Published by ASCEE Publications in International Journal of Robotics and Control Systems
- Vol. 5 (2) , 990-1005
Open AccessEnhancement of Transient Stability and Power Quality in Grid-Connected PV Systems Using SMES
One of the main issues with grid-connected distributed energy systems, including photovoltaic (PV) systems, is the DC bus voltage's instability during load fluctuations and power line short circuits. This paper attempts to address this problem and proposes to use superconducting magnetic energy storage (SMES) to stabilize the voltage of the DC link and improve the power quality and transient stability of the power system. The investigated configuration components are PV cells, boost converter, chopper, SMES, three level inverter (NPC), filter, grid, and load. MATLAB / Sim Power System is used to test the performance of a SMES in order to ensure the balance of the DC bus voltage of a PV system connected to the grid. Several scenarios were considered to show the performance and benefits of combining a SMES with the PV system. The outcomes of the examined scenarios (fault and load change) demonstrate the precision of the employed control systems, maintaining the DC voltage at acceptable levels (≈500 V), enhances the structure stability, and improving power quality (GPV THD = 4.34). Finally, it can be concluded that the proposed configuration will help in achieving high penetration scenarios of PV systems.
- Open Access
- 1 January 2025
- Published by Wiley in International Transactions on Electrical Energy Systems
- Vol. 2025 (1)
Optimizing Power Flow in Photovoltaic‐Hybrid Energy Storage Systems: A PSO and DPSO Approach for PI Controller Tuning
This paper focuses on developing power management strategies for hybrid energy storage systems (HESSs) combining batteries and supercapacitors (SCs) with photovoltaic (PV) systems. The proposed control scheme is based on proportional‐integral (PI) controllers optimized with particle swarm optimization (PSO) and duplicate particle swarm optimization (DPSO) algorithms. The aim is to reduce peak current and the energy management system’s response time while enhancing the system’s stability during the charging and discharging of the HSS under various operating conditions. A comparative study with other tuning methods is presented to demonstrate the effectiveness of the proposed DPSO algorithm in particle duplication, population diversity, and the convergence speed toward the global optimum, enhancing the overall system’s performance. The results demonstrate the feasibility and robustness of the PI − DPSO in providing quick and accurate responses even under variable load, variable solar irradiations, and variable temperature, thus enhancing the dynamic response of the SC and reducing battery stress, resulting in a longer lifespan for the HESS.
- 1 January 2025
- Published by Wiley in International Transactions on Electrical Energy Systems
- Vol. 2025 (1)
Open AccessOptimizing Power Flow in Photovoltaic‐Hybrid Energy Storage Systems: A PSO and DPSO Approach for PI Controller Tuning
This paper focuses on developing power management strategies for hybrid energy storage systems (HESSs) combining batteries and supercapacitors (SCs) with photovoltaic (PV) systems. The proposed control scheme is based on proportional‐integral (PI) controllers optimized with particle swarm optimization (PSO) and duplicate particle swarm optimization (DPSO) algorithms. The aim is to reduce peak current and the energy management system’s response time while enhancing the system’s stability during the charging and discharging of the HSS under various operating conditions. A comparative study with other tuning methods is presented to demonstrate the effectiveness of the proposed DPSO algorithm in particle duplication, population diversity, and the convergence speed toward the global optimum, enhancing the overall system’s performance. The results demonstrate the feasibility and robustness of the PI − DPSO in providing quick and accurate responses even under variable load, variable solar irradiations, and variable temperature, thus enhancing the dynamic response of the SC and reducing battery stress, resulting in a longer lifespan for the HESS.
- 3 April 2020
- Published by Hindawi Limited in International Transactions on Electrical Energy Systems
- Vol. 30 (7)
Hierarchical energy management and control to improve the reliability and efficiency of wind farms connected to the grid
This article proposes hierarchical power management and energy control aimed at improving the reliability and efficiency of electric power generation from a wind farm connected to the grid. The wind farm consists of three wind energy conversion systems (WECS) each consisting of a wind turbine, a double‐feed induction generator and five‐level power converters. The first control layer includes a maximum power point tracking algorithm to extract the maximum power from the wind energy source based on an optimal torque control strategy. The real and reactive power flow from the WECS to the grid is controlled with a non‐linear backstepping controller based on the Lyapunov stability theory. Finally, a DC bus voltage controller with a clamping bridge is employed to ensure the stability of the DC bus voltage and to compensate for transient disturbances caused by load fluctuations. The second layer of control ensures coordination between the wind farm, the power grid and the load to ensure reliable and efficient power supply. The model of the grid‐connected wind farm and the proposed control scheme are developed using MATLAB and Sim Power Systems Toolbox. A series of simulation scenarios are presented to evaluate the performance of the proposed control scheme under various operating conditions.
- 3 April 2020
- Published by Hindawi Limited in International Transactions on Electrical Energy Systems
- Vol. 30 (7)
Hierarchical energy management and control to improve the reliability and efficiency of wind farms connected to the grid
This article proposes hierarchical power management and energy control aimed at improving the reliability and efficiency of electric power generation from a wind farm connected to the grid. The wind farm consists of three wind energy conversion systems (WECS) each consisting of a wind turbine, a double‐feed induction generator and five‐level power converters. The first control layer includes a maximum power point tracking algorithm to extract the maximum power from the wind energy source based on an optimal torque control strategy. The real and reactive power flow from the WECS to the grid is controlled with a non‐linear backstepping controller based on the Lyapunov stability theory. Finally, a DC bus voltage controller with a clamping bridge is employed to ensure the stability of the DC bus voltage and to compensate for transient disturbances caused by load fluctuations. The second layer of control ensures coordination between the wind farm, the power grid and the load to ensure reliable and efficient power supply. The model of the grid‐connected wind farm and the proposed control scheme are developed using MATLAB and Sim Power Systems Toolbox. A series of simulation scenarios are presented to evaluate the performance of the proposed control scheme under various operating conditions.
- 25 October 2019
- Published by Springer Nature in International Journal of System Assurance Engineering and Management
- Vol. 10 (6) , 1555-1566
Comparative study of back-stepping controller and super twisting sliding mode controller for indirect power control of wind generator
- 25 October 2019
- Published by Springer Nature in International Journal of System Assurance Engineering and Management
- Vol. 10 (6) , 1555-1566
Comparative study of back-stepping controller and super twisting sliding mode controller for indirect power control of wind generator
- Open Access
- 1 December 2013
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 3 (4) , 351-364
Hybrid Fuzzy Sliding Mode Control of a DFIG Integrated into the Network
- 1 December 2013
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 3 (4) , 351-364
Open AccessHybrid Fuzzy Sliding Mode Control of a DFIG Integrated into the Network