Victor Fassina Brocco
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Victor Fassina Brocco has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Juarez Benigno Paes
Department of Forest and Wood Sciences, Federal University of Espírito Santo, Jerônimo Monteiro, Brazil
12 shared publications Lais Gonçalves da Costa
Department of Forest and Wood Science , Federal University of Espírito Santo , Av. Governador Lindemberg, 316, 29550-000 Jerônimo Monteiro , Espírito Santo , Brazil
3 shared publicationsMarina Donária Chaves Arantes
3 shared publications- Marina Donária Chaves Arantes
Universidade Federal de São João del-Rei
3 shared publications - Amy B. Bishell
USDA-FS Forest Products Laboratory, Madison, WI 53726, USA
2 shared publications - Fabricio Gomes Gonçalves
Department of Forest and Wood Sciences, Federal University of Espírito Santo, Jerônimo Monteiro, Brazil
2 shared publications
Latest Publications
- Open Access
- 16 February 2026
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 80 (4) , 265-276
Efficiency of extracts from Amazonian species in protecting the wood of Hevea brasiliensis Muell. Arg. against xylophagous fungi
The research aimed to evaluate the effect of transferring extracts from residues of durable Amazonian wood species processing to a non-durable wood species (rubber tree) to prolong its use. For this purpose, three trees of rubber tree (27 years old) were collected from Santa Maria farm in the district of Pacotuba, Cachoeiro de Itapemirim, south of the state of Espírito Santo, Brazil. These trees were transformed into samples for testing basic density, dimensional stability, retention and pH of the extracts, and resistance of the samples impregnated with the solutions obtained to xylophagous fungi. The impregnation of the wood was carried out using alcoholic extracts (solutions) of Hymenolobium flavum , Roupala montana, Dinizia excelsa , and Tectona grandis . The rubber tree wood had a medium density and moderately stable dimensional stability. The extracts were used in concentrations of 2, 4 and 8 % and tested against brown-rot fungi ( Rhodonia placenta and Neolentinus lepideus ) and white-rot fungi ( Polyporus fumosus and Trametes versicolor ). The extracts exhibited acidic pH (3.5–6.1), which contributed to the effectiveness against the tested fungi. The extracts of R. montana and T. grandis , at concentrations of 4 and 8 %, were more effective in controlling the development of xylophagous fungi.
- 16 February 2026
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 80 (4) , 265-276
Open AccessEfficiency of extracts from Amazonian species in protecting the wood of Hevea brasiliensis Muell. Arg. against xylophagous fungi
The research aimed to evaluate the effect of transferring extracts from residues of durable Amazonian wood species processing to a non-durable wood species (rubber tree) to prolong its use. For this purpose, three trees of rubber tree (27 years old) were collected from Santa Maria farm in the district of Pacotuba, Cachoeiro de Itapemirim, south of the state of Espírito Santo, Brazil. These trees were transformed into samples for testing basic density, dimensional stability, retention and pH of the extracts, and resistance of the samples impregnated with the solutions obtained to xylophagous fungi. The impregnation of the wood was carried out using alcoholic extracts (solutions) of Hymenolobium flavum , Roupala montana, Dinizia excelsa , and Tectona grandis . The rubber tree wood had a medium density and moderately stable dimensional stability. The extracts were used in concentrations of 2, 4 and 8 % and tested against brown-rot fungi ( Rhodonia placenta and Neolentinus lepideus ) and white-rot fungi ( Polyporus fumosus and Trametes versicolor ). The extracts exhibited acidic pH (3.5–6.1), which contributed to the effectiveness against the tested fungi. The extracts of R. montana and T. grandis , at concentrations of 4 and 8 %, were more effective in controlling the development of xylophagous fungi.
- 28 August 2025
- Published by Springer Nature
- p. 52-58
Assessment of the Effect of Thermal Modification on the Colorimetric Properties of Three Amazonian Species
- 28 August 2025
- Published by Springer Nature
- p. 52-58
Assessment of the Effect of Thermal Modification on the Colorimetric Properties of Three Amazonian Species
- 30 December 2024
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 79 (2-3) , 152-167
Extracts from teak wood industrial waste: decay performance of treated wood after artificial weathering
This study aimed to evaluate the preservative potential of extracts from teak wood industrial waste against artificial weathering and decay fungi. Teak extracts were obtained in hot water, acetone, ethanol and methanol and tested against brown-rot (Rhodonia placenta, Gloeophyllum trabeum, Neolentinus lepideus) and white-rot fungi (Irpex lacteus). Aging tests included the leaching test and artificial weathering in a QUV accelerated weathering tester. The chemical analysis of the extracts was carried out by gas chromatography-mass spectrometry (GC-MS), and the compounds were compared with the cited literature. The extracts were characterized as quinone derivatives (35 %), mainly tectoquinone (28 %), followed by squalene (8–12 %) and other phenolic compounds (6 %). Lapachol, although found in proportions of 0.7–0.9 %, plays an important role in wood durability and biocidal activity in teak extracts. The results obtained by the chemical analysis indicated that the main compounds identified in this study can act synergistically on the resistance of wood impregnated. Teak extracts ensured high resistance to the decay fungi tested and results showed better performance of acetone extracts. In view of the results obtained, it is recommended to carry out other tests (soil bed and field tests) to verify the long-term effects of the extracts.
- 30 December 2024
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 79 (2-3) , 152-167
Extracts from teak wood industrial waste: decay performance of treated wood after artificial weathering
This study aimed to evaluate the preservative potential of extracts from teak wood industrial waste against artificial weathering and decay fungi. Teak extracts were obtained in hot water, acetone, ethanol and methanol and tested against brown-rot (Rhodonia placenta, Gloeophyllum trabeum, Neolentinus lepideus) and white-rot fungi (Irpex lacteus). Aging tests included the leaching test and artificial weathering in a QUV accelerated weathering tester. The chemical analysis of the extracts was carried out by gas chromatography-mass spectrometry (GC-MS), and the compounds were compared with the cited literature. The extracts were characterized as quinone derivatives (35 %), mainly tectoquinone (28 %), followed by squalene (8–12 %) and other phenolic compounds (6 %). Lapachol, although found in proportions of 0.7–0.9 %, plays an important role in wood durability and biocidal activity in teak extracts. The results obtained by the chemical analysis indicated that the main compounds identified in this study can act synergistically on the resistance of wood impregnated. Teak extracts ensured high resistance to the decay fungi tested and results showed better performance of acetone extracts. In view of the results obtained, it is recommended to carry out other tests (soil bed and field tests) to verify the long-term effects of the extracts.
- Open Access
- 21 November 2024
- Published by Universidad del Bio Bio in Maderas. Ciencia y Tecnología
- Vol. 27, 1-15
Antifungal and antitermitic potential of extracts of industrial wood waste from Central Amazon, Brazil
Studies on wood durability have highlighted the use of new environmentally friendly substances. In this sense, research carried out with Amazonian forest species is extremely important for the discovery of new bioactive substances from durable wood and its residues. The aim of this study was to evaluate the antitermitic and antifungal potential of extracts obtained from industrial processing residues of wood species from Central Amazonia, Brazil. The sawdust of seven Amazonian wood species were collected to obtain extracts and quantify the extractive content. The extracts produced were tested for inhibition of fungal growth of Rhodonia placenta and Trametes versicolor and impregnated in low natural durability wood known as Simarouba amara (marupa) to verify the effect on wood natural durability against Nasutitermes sp. termites and Gloeophyllum trabeum fungus. Simarouba amara (marupa) wood was easily impregnated and showed satisfactory retention values. The species Buchenavia sp., Dinizia excelsa (red angelim), Hymenolobium flavum (angelim pedra) and Manilkara elata (maçaranduba) exhibited high contents of secondary metabolites. It was observed that the extracts of Roupala montana (louro faia) and Hymenolobium flavum (angelim pedra) exhibited the best performance in inhibiting fungal growth. In the accelerated decay test, marupa wood impregnated with Buchenavia sp. (tanimbuca) extract showed the lowest weight loss after exposure to the fungus Gloeophyllum trabeum. In the termite choice feeding test, wood impregnated with Dinizia excelsa (red angelim) and Buchenavia sp. (tanimbuca) extracts were most consumed and the extracts of Roupala montana (louro faia), Cordia sp., Hymenolobium flavum (angelim pedra) and Manilkara elata (maçaranduba) provided greater inhibition of termite attack. The combination of extracts must be tested in future studies to verify the synergistic effect, in addition to the chemical analyses of the selected extracts.
- 21 November 2024
- Published by Universidad del Bio Bio in Maderas. Ciencia y Tecnología
- Vol. 27, 1-15
Open AccessAntifungal and antitermitic potential of extracts of industrial wood waste from Central Amazon, Brazil
Studies on wood durability have highlighted the use of new environmentally friendly substances. In this sense, research carried out with Amazonian forest species is extremely important for the discovery of new bioactive substances from durable wood and its residues. The aim of this study was to evaluate the antitermitic and antifungal potential of extracts obtained from industrial processing residues of wood species from Central Amazonia, Brazil. The sawdust of seven Amazonian wood species were collected to obtain extracts and quantify the extractive content. The extracts produced were tested for inhibition of fungal growth of Rhodonia placenta and Trametes versicolor and impregnated in low natural durability wood known as Simarouba amara (marupa) to verify the effect on wood natural durability against Nasutitermes sp. termites and Gloeophyllum trabeum fungus. Simarouba amara (marupa) wood was easily impregnated and showed satisfactory retention values. The species Buchenavia sp., Dinizia excelsa (red angelim), Hymenolobium flavum (angelim pedra) and Manilkara elata (maçaranduba) exhibited high contents of secondary metabolites. It was observed that the extracts of Roupala montana (louro faia) and Hymenolobium flavum (angelim pedra) exhibited the best performance in inhibiting fungal growth. In the accelerated decay test, marupa wood impregnated with Buchenavia sp. (tanimbuca) extract showed the lowest weight loss after exposure to the fungus Gloeophyllum trabeum. In the termite choice feeding test, wood impregnated with Dinizia excelsa (red angelim) and Buchenavia sp. (tanimbuca) extracts were most consumed and the extracts of Roupala montana (louro faia), Cordia sp., Hymenolobium flavum (angelim pedra) and Manilkara elata (maçaranduba) provided greater inhibition of termite attack. The combination of extracts must be tested in future studies to verify the synergistic effect, in addition to the chemical analyses of the selected extracts.
- Open Access
- 22 September 2023
- Published by Brazilian Journals in REVISTA DELOS
- Vol. 16 (47) , 2782-2801
Propriedades tecnológicas das madeiras de Diplotropis purpurea (Rich.) Amshoff e Andira parviflora Ducke
Devido ao crescimento no mercado por espécies madeireiras nativas para os diferentes ramos da indústria, o estudo de suas propriedades tecnológicas tornou-se fundamental para o uso mais adequado do material. Diante disso, esse trabalho objetivou a caracterização das propriedades tecnológicas e sua influência na resistência natural da madeira das espécies Diplotropis purpurea (Rich.) Amshoff. (sucupira preta) e Andira parviflora Ducke (sucupira vermelha). Para o estudo, foram utilizados dois indivíduos para cada espécie, sendo confeccionados 3 (três) discos de 10 cm de espessura de diferentes posições relativas do tronco de cada indivíduo: base, meio e topo. Destes discos foram confeccionados corpos de prova com dimensões definidas de acordo com o tipo de ensaio. Diferentes posições radiais (cerne interno, intermediário e externo) foram utilizadas para determinação do teor de extrativos e durabilidade natural a fungos e cupins. Os resultados da Diplotropis purpurea indicaram uma redução seguida de aumento na densidade básica nas posições avaliadas (0,830 g/cm³, base; 0,735 g/cm³, meio; e 0,856 g/cm³, topo) e o decréscimo no teor de umidade (41,55%, base; 36,11%, meio; e 33,24%, topo). Os valores da Andira parviflora indicaram um decréscimo na densidade básica na variação base-topo (0,810 g/cm³, base; 0,750 g/cm³, meio; e 0,726 g/cm³, topo) e o aumento do teor de umidade (40,62%, base; 50,98%, meio; e 52,19%, topo). Na quantificação do teor de extrativos constatou-se o alto teor de extrativos para A. parviflora. No ensaio de resistência a fungos xilófagos e térmitas ambas as espécies se mostraram resistentes, havendo baixa perda de massa.
- 22 September 2023
- Published by Brazilian Journals in REVISTA DELOS
- Vol. 16 (47) , 2782-2801
Open AccessPropriedades tecnológicas das madeiras de Diplotropis purpurea (Rich.) Amshoff e Andira parviflora Ducke
Devido ao crescimento no mercado por espécies madeireiras nativas para os diferentes ramos da indústria, o estudo de suas propriedades tecnológicas tornou-se fundamental para o uso mais adequado do material. Diante disso, esse trabalho objetivou a caracterização das propriedades tecnológicas e sua influência na resistência natural da madeira das espécies Diplotropis purpurea (Rich.) Amshoff. (sucupira preta) e Andira parviflora Ducke (sucupira vermelha). Para o estudo, foram utilizados dois indivíduos para cada espécie, sendo confeccionados 3 (três) discos de 10 cm de espessura de diferentes posições relativas do tronco de cada indivíduo: base, meio e topo. Destes discos foram confeccionados corpos de prova com dimensões definidas de acordo com o tipo de ensaio. Diferentes posições radiais (cerne interno, intermediário e externo) foram utilizadas para determinação do teor de extrativos e durabilidade natural a fungos e cupins. Os resultados da Diplotropis purpurea indicaram uma redução seguida de aumento na densidade básica nas posições avaliadas (0,830 g/cm³, base; 0,735 g/cm³, meio; e 0,856 g/cm³, topo) e o decréscimo no teor de umidade (41,55%, base; 36,11%, meio; e 33,24%, topo). Os valores da Andira parviflora indicaram um decréscimo na densidade básica na variação base-topo (0,810 g/cm³, base; 0,750 g/cm³, meio; e 0,726 g/cm³, topo) e o aumento do teor de umidade (40,62%, base; 50,98%, meio; e 52,19%, topo). Na quantificação do teor de extrativos constatou-se o alto teor de extrativos para A. parviflora. No ensaio de resistência a fungos xilófagos e térmitas ambas as espécies se mostraram resistentes, havendo baixa perda de massa.
- 1 January 2022
- Published by Elsevier in Chemosphere
- Vol. 286 (Pt 1) , 131629
Biological and chemical remediation of CCA treated eucalypt poles after 30 years in service
- 1 January 2022
- Published by Elsevier in Chemosphere
- Vol. 286 (Pt 1) , 131629
Biological and chemical remediation of CCA treated eucalypt poles after 30 years in service
- 23 April 2020
- Published by Forest Research Institute Malaysia in JOURNAL OF TROPICAL FOREST SCIENCE
- Vol. 32 (2) , 154-160
ISOLATION AND IDENTIFICATION OF FUNGI WITH POTENTIAL FOR BIOLOGICAL STUMP REMOVAL OF EUCALYPTUS SPP.
- 23 April 2020
- Published by Forest Research Institute Malaysia in JOURNAL OF TROPICAL FOREST SCIENCE
- Vol. 32 (2) , 154-160
ISOLATION AND IDENTIFICATION OF FUNGI WITH POTENTIAL FOR BIOLOGICAL STUMP REMOVAL OF EUCALYPTUS SPP.
- 8 November 2019
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 74 (3) , 233-245
Wood color changes and termiticidal properties of teak heartwood extract used as a wood preservative
The aim of this study was to evaluate the change in colorimetric patterns and the termite resistance of light-colored and low durability wood when impregnated with teak (Tectona grandis) heartwood extractives. Hot water and ethanol extracts were obtained from 20-year-old teak heartwood and used to evaluate the influence on color change and the natural resistance of 10-year-old teak sapwood andPinussp. For wood impregnation, a full-cell (Bethell) treatment was conducted. To verify the influence of the teak extracts, the colorimetric patterns of wood were determined using the Munsell and CIE-L*a*b* systems. Choice and no-choice feeding tests were performed under laboratory conditions to test the efficacy of the teak extract solutions against two termite speciesNasutitermes cornigerandCryptotermes brevis. All of the extract solutions promoted a significant darkening of the wood, bringing the color of the impregnated wood closer to older teak heartwood than the untreated samples of the respective species. Ethanol extracts increased the resistance and mortality againstN. cornigerin both choice and no-choice tests. Resistance toC. breviswas not clearly affected.
- 8 November 2019
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 74 (3) , 233-245
Wood color changes and termiticidal properties of teak heartwood extract used as a wood preservative
The aim of this study was to evaluate the change in colorimetric patterns and the termite resistance of light-colored and low durability wood when impregnated with teak (Tectona grandis) heartwood extractives. Hot water and ethanol extracts were obtained from 20-year-old teak heartwood and used to evaluate the influence on color change and the natural resistance of 10-year-old teak sapwood andPinussp. For wood impregnation, a full-cell (Bethell) treatment was conducted. To verify the influence of the teak extracts, the colorimetric patterns of wood were determined using the Munsell and CIE-L*a*b* systems. Choice and no-choice feeding tests were performed under laboratory conditions to test the efficacy of the teak extract solutions against two termite speciesNasutitermes cornigerandCryptotermes brevis. All of the extract solutions promoted a significant darkening of the wood, bringing the color of the impregnated wood closer to older teak heartwood than the untreated samples of the respective species. Ethanol extracts increased the resistance and mortality againstN. cornigerin both choice and no-choice tests. Resistance toC. breviswas not clearly affected.
- Open Access
- 19 September 2019
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 49 (4) , 803-812
Color variability and relationship with basic density and extractive content of Calycophyllum spruceanum wood
There are reports relating color to extractives, however there is a lack of information about the effect of other characteristics on the colorimetry of wood. Thus, this study aimed to evaluate the longitudinal and radial variability of color and its relationship with the basic density and extractive contents of Calycophyllum spruceanum wood from a six-year-old plantation located in Rio Branco, Acre, Brazil. The determination and assessment of the wood color were carried out by the Commission Internationale de L’Éclairage - CIE-L*a*b* system. The basic density and extractive contents were determined according to current technical standards. The species wood color was classified as yellowish olive. The highest and lowest lightness (L*) were longitudinally observed in the base (cutting height) and diameter at breast height (DBH), taken at 1.30 m from the ground. In relation to radial position, the lightness (L*) was lower in peripheral regions of the trunk. Higher concentrations of redness (a*) and yellowness (b*) and saturation (C) occurred along the DBH and the external radial position. In evaluating age, the extractive contents were not correlated to the wood color, while the basic density was correlated with a*, b*, C and h* colorimetric parameters. The colorimetric characterization of this specie contributes to its proper identification and a more homogeneous classification of lumber, and can be used from the log break-down (sawing) to its end use, adding commercial value to the wood.
- 19 September 2019
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 49 (4) , 803-812
Open AccessColor variability and relationship with basic density and extractive content of Calycophyllum spruceanum wood
There are reports relating color to extractives, however there is a lack of information about the effect of other characteristics on the colorimetry of wood. Thus, this study aimed to evaluate the longitudinal and radial variability of color and its relationship with the basic density and extractive contents of Calycophyllum spruceanum wood from a six-year-old plantation located in Rio Branco, Acre, Brazil. The determination and assessment of the wood color were carried out by the Commission Internationale de L’Éclairage - CIE-L*a*b* system. The basic density and extractive contents were determined according to current technical standards. The species wood color was classified as yellowish olive. The highest and lowest lightness (L*) were longitudinally observed in the base (cutting height) and diameter at breast height (DBH), taken at 1.30 m from the ground. In relation to radial position, the lightness (L*) was lower in peripheral regions of the trunk. Higher concentrations of redness (a*) and yellowness (b*) and saturation (C) occurred along the DBH and the external radial position. In evaluating age, the extractive contents were not correlated to the wood color, while the basic density was correlated with a*, b*, C and h* colorimetric parameters. The colorimetric characterization of this specie contributes to its proper identification and a more homogeneous classification of lumber, and can be used from the log break-down (sawing) to its end use, adding commercial value to the wood.