Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anna Magrini has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Acoustic Vases in Europe: A Review of Documentation, Approaches, Measurement Methodologies, and Preliminary Proposal for a Methodological Framework

    by Anna Magrini, Lucia Cattani, Andrea Cerniglia

    Research on acoustic vases embedded in historical buildings has progressively developed through archaeology, architectural history, and acoustics, producing extensive documentation on their distribution, geometry, installation and possible acoustic role, with experimental evidence from in situ measurements, laboratory tests, and numerical analyses. However, documentation and measurement procedures remain highly heterogeneous, limiting reproducibility and comparative interpretation. Within this context, the present work proposes a preliminary methodological framework for future investigations. It reviews the principal European documentation, census, experimental, and numerical approaches identified by the authors. Particular attention is given to the recording system developed by Palazzo-Bertholon and Valière and to the experimental methodologies adopted in previous studies, including procedures, acoustic descriptors, and instrumentation. A possible extension of the “fiche d’information” is discussed to make geometrical, spatial, and installation-related data more explicit for comparative analyses, acoustic modelling, and measurement planning. A documented case study is used to illustrate the proposed organization of information, followed by a simplified acoustic simulation showing how structured data may support model construction and interpretation. The proposed procedure therefore combines simulation and in situ measurements, with standard and advanced investigation levels. The study is aimed at improving documentation quality, consistency, and comparability rather than providing definitive evidence of acoustic effectiveness.

  • Open Access

    The Energy–Quality Nexus in Atmospheric Water Generation: A Review of Contaminants, Performance Metrics, and the Proposal of the AWEQI

    by Lucia Cattani, Paolo Cattani, Anna Magrini

    Atmospheric water (AW) is currently recognized as a promising solution to mitigate the global water crisis. Nevertheless, its harvesting techniques should balance three main aspects: energy consumption, yield, and the quality of produced water. Water quality is of the utmost importance, because the potential uses of atmospheric water—and therefore its value—ultimately depend on this characteristic. Currently, existing indices and indicators intended as evaluation tools for different harvesting techniques generally focus on the first two aspects only, overlooking the quality perspective, with the risk of overestimating the performance of systems that require less energy but provide low-quality water. This study fills this knowledge gap by proposing a new evaluation tool, the Atmospheric Water Energy–Quality Index (AWEQI). This index links the energy evaluation of an Atmospheric Water Generator (AWG)—a term referring to all active, passive, or hybrid systems for atmospheric water collection—to the quality of the produced water. The index is constructed through an appropriate reformulation and combination of the Water Energy Transformation (WET) indicator and the Water Quality Index (WQI) to obtain a monotonic function whose values increase with improved performance, both in terms of energy efficiency and water quality. Moreover, based on a literature review, the study presents an analysis of potential AW contaminants and their sources, and proposes two parameter sets to be considered in the WQI calculation.


  • Open Access

    Towards Integrated Design Tools for Water–Energy Nexus Solutions: Simulation of Advanced AWG Systems at Building Scale

    by Lucia Cattani, Roberto Figoni, Paolo Cattani, Anna Magrini

    This study investigated the integration of advanced Atmospheric Water Generators (AWGs) within the design process of building energy systems, focusing on the water–energy nexus in the context of a real-life hospital building. It is based on a simulation approach, recognised as a viable means to analyse and enhance AWG potentialities. However, the current state of research does not address the issue of AWG integration within building plant systems. This study contributes to fill such a research gap by building upon an authors’ previous work and proposing an enhanced methodology. The methodology describes how to incorporate a multipurpose AWG system into the energy simulation environment of DesignBuilder (DB), version 7.0.0116, through its coupling with AWGSim, version 1.20d, a simulation tool specifically developed for atmospheric water generators. The chosen case study is a wing of the Mondino Hospital in Pavia, Italy, selected for its complex geometry and HVAC requirements. By integrating AWG outputs—covering water production, heating, and cooling—into DB, this study compared two configurations: the existing HVAC system and an enhanced version that includes the AWG as plant support. The simulation results demonstrated a 16.3% reduction in primary energy consumption (from 231.3 MWh to 193.6 MWh), with the elimination of methane consumption and additional benefits in water production (257 m3). This water can be employed for photovoltaic panel cleaning, further reducing the primary energy consumption to 101.9 MWh (55.9% less than the existing plant), and for human consumption or other technical needs. Moreover, this study highlights the potential of using AWG technology to supply purified water, which can be a pivotal solution for hospitals located in areas affected by water crises. This research contributes to the atmospheric water field by addressing the important issue of simulating AWG systems within building energy design tools, enabling informed decisions regarding water–energy integration at the project stage and supporting a more resilient and sustainable approach to building infrastructure.


  • Open Access

    Integrated Atmospheric Water Generators for Building Sustainability: A Simulation-Based Approach

    by Lucia Cattani, Roberto Figoni, Paolo Cattani, Anna Magrini

    This paper presents the first results of a broader study aimed at considering atmospheric water generation as a viable option within sustainable building design strategies. In particular, the focus is on integrated systems in which atmospheric water generator (AWG) machines, in addition to producing water, support HVAC systems. The research focuses on the combined use of two different simulation tools: a commercial tool designed to study the energy balance of buildings and a custom-developed software for AWG modelling. This is the first step of a more complex procedure of software integration that is aimed to provide designers with a method to implement AWGs in the design process of buildings, both residential or industrial. This preliminary procedure is applied to a case study concerning the link between an advanced integrated AWG and a building housing inverters and transformers that belong to a photovoltaic field. The scope of the integration consists in enhancing the energy sustainability of atmospheric water intended for hydrogen production and panel washing by means of the dry and cold air flux that comes from the cycle of vapour condensation. The results highlight the potentialities of the integrated design, which includes AWGs, to enhance the final efficiency of sustainable housing. In particular, the joint action of the simulation tools used in this study provides insights about the possibility to reduce the size of traditional chiller that serve the building by an order of magnitude, and to achieve an energy saving of 29.8 MWh a year.


  • Open Access

    Performance Assessment of Atmospheric Water Generators: A Review of Evaluation Tools and Proposal for a Novel Advanced Global Evaluation Index for HVAC–AWG Hybrid Solutions

    by Lucia Cattani, Paolo Cattani, Roberto Figoni, Anna Magrini

    In the context of an increasing water crisis and rising energy consumption, an integrated approach to plant design and improvement can be highly effective. Specifically, the use of advanced multipurpose Atmospheric Water Generator (AWG) machines, integrated into existing or new HVAC systems, can improve efficiency while simultaneously extracting atmospheric water. However, hybrid plant configurations, which encompass both integrated and traditional solutions, can be difficult to assess. This paper presents a brief review of the most widely used AWG evaluation tools and proposes a new index, called AGEI, designed to address the knowledge gap in evaluating hybrid plants from an efficiency perspective. The paper shows how this index provides results that more accurately reflect the real efficiency of hybrid plant configurations compared to the Global Evaluation Index (GEI), which is the only existing tool addressed to the evaluation of integrated multipurpose machines. The work is complemented by the application of AGEI to three complex hybrid plant configurations, two of which include a bottling system supplied by desalination for drinking water production. The index is straightforward and requires only knowledge of the useful effects produced by the analysed plant and their corresponding efficiency indicators.


  • Open Access

    Design and Performance Analysis of a Small-Scale Prototype Water Condensing System for Biomass Combustion Flue Gas Abatement

    by Valentina Coccia, Ramoon Barros Lovate Temporim, Leandro Lunghi, Oleksandra Tryboi, Franco Cotana, Anna Magrini, Daniele Dondi, Dhanalakshmi Vadivel, Marco Cartesegna, Andrea Nicolini

    This article outlines the design and performance of a flue gas condensation system integrated with a biomass combustion plant. The system comprises a biomass plant fuelled by wood chips, generating flue gases. These gases are condensed via a double heat exchanger set-up, extracting water and heat to reduce concentrations of CO, CO2, and NOx while releasing gases at a temperature close to ambient temperature. The 100 kW biomass plant operates steadily, consuming 50 kg of wood chips per hour with fuel energy of 18.98 MJ/kg. Post combustion, the gases exit at 430 °C and undergo two-stage cooling. In the first stage, gases are cooled in a high-temperature tube heat exchanger, transferring heat to air. They then enter the second stage, a flue gas/water heat exchanger, recovering sensible and latent thermal energy, which leads to water condensation. Flue gas is discharged at approximately 33 °C. Throughout, parameters like the flue gas temperatures, mass flow, fuel consumption, heat carrier temperatures, and water condensation rates were monitored. The test results show that the system can condense water from flue gas at 75 g/min at 22 °C while reducing pollutant emissions by approximately 20% for CO2, 19% for CO, 30% for NO, and 26% for NOx.


  • Open Access

    A Method and Metrics to Assess the Energy Efficiency of Smart Working

    by Lucia Cattani, Anna Magrini, Anna Chiari

    The paper discusses the energy efficiency of smart working (SW) as a solution to traditional work-approach issues, with a focus on evaluating benefits for both employers and employees. Remote working, while offering environmental advantages such as reduced commuting and office space use, poses challenges in assessing its true impact. The study presents results from a dynamic analysis on a real residential building, typical of an architectural style diffused in northern Italy, revealing a 15% average increase in energy consumption when all work tasks are performed from home. To address concerns about the environmental impact of SW, the research proposes a method and metrics for evaluation. Four novel indices (SWEET, SEE, SSEE, and 4E) are introduced, providing a structured approach to assess the energy efficiency of SW initiatives. The paper outlines a methodology for data gathering and metric application, aiming to acquire quantitative insights and mitigate disparities arising from a transfer of burdens to employees. This contribution not only signifies a ground-breaking methodology but also addresses an unresolved research question concerning the evaluation of the actual energy efficiency of smart working implementations for both employers and employees. The results underscore the importance of understanding the nuances of SW’s impact on household energy usage and its broader implications for sustainability goals.


  • Open Access

    Tyre–Road Heat Transfer Coefficient Equation Proposal

    by Paolo Cattani, Lucia Cattani, Anna Magrini

    Tyres are one of the most important elements of a vehicle because they are the link to the road and have a huge impact on traffic-related pollution. Knowing their behaviour, thus being able to use them at their best and reducing their wear rate, is one of the means of improving their lifetime, which means decreasing traffic environmental impact. In order to understand how tyres behave and to predict the real-time tyre–road coefficient of friction, which is strongly influenced by the temperature, in the last few years several complex thermo-mechanical models of heat transfer inside the tyre have been developed. However, in the current state of the art of the literature and practice, there is still an important parameter regarding such models that is not deeply studied. This parameter is the heat transfer coefficient between the tyre and the road at the contact patch, which usually is considered as a constant. The current research paper allows understanding that such an approximation is not always valid for all of the speeds and tyre loads of city and race cars; instead, it is developed an equation that, for the first time, calculates the real-time, dynamic tyre–road heat transfer coefficient, taking into account the tyre’s travelling speed and the footprint length. The equation results are in good agreement with the empirical values coming from the literature and permit understanding how much such a parameter can vary, depending on the tyre use range. The formulation is simple enough to be easily implemented in existing thermodynamic tyre models without requiring meaningful computational time.


  • Open Access

    Suitability and Energy Sustainability of Atmospheric Water Generation Technology for Green Hydrogen Production

    by Lucia Cattani, Paolo Cattani, Anna Magrini, Roberto Figoni, Daniele Dondi, Dhanalakshmi Vadivel

    This research investigated the suitability of air-to-water generator (AWG) technology to address one of the main concerns in green hydrogen production, namely water supply. This study specifically addresses water quality and energy sustainability issues, which are crucial research questions when AWG technology is intended for electrolysis. To this scope, a reasoned summary of the main findings related to atmospheric water quality has been provided. Moreover, several experimental chemical analyses specifically focused on meeting electrolysis process requirements, on water produced using a real integrated AWG system equipped with certified materials for food contact, were discussed. To assess the energy sustainability of AWGs in green hydrogen production, a case study was presented regarding an electrolyzer plant intended to serve as energy storage for a 2 MW photovoltaic field on Iriomote Island. The integrated AWG, used for the water quality analyses, was studied in order to determine its performance in the specific island climate conditions. The production exceeded the needs of the electrolyzer; thus, the overproduction was considered for the panels cleaning due to the high purity of the water. Due to such an operation, the efficiency recovery was more than enough to cover the AWG energy consumption. This paper, on the basis of the quantity results, provides the first answers to the said research questions concerning water quality and energy consumption, establishing the potential of AWG as a viable solution for addressing water scarcity, and enhancing the sustainability of electrolysis processes in green hydrogen production.


  • Open Access

    Acoustic Quality of the External Environment: Indications on Questionnaire Structure for Investigating Subjective Perception

    by Anna Magrini, Gelsomina Di Feo, Andrea Cerniglia

    The subjective judgment on the annoyance produced by noise is always an important tool to complete an investigation, and to find the best way for its reduction. Therefore, acoustic analyses for environmental improvement frequently combine objective measures with subjective surveys to gain a comprehensive understanding of the problem. The technical specification, concerning the “Assessment of noise annoyance by means of social and socio-acoustic surveys”, ISO/TS 15666 (revised in 2021), has represented a basis for these activities since 2003, when it aimed to obtain information about noise annoyance “at home”. The more recent ISO/TS 12913-2 (2018), aimed at soundscape studies, investigations and applications, provides guidelines for conducting social and socio-acoustic surveys to assess noise annoyance and, in particular, it gives detailed indications on data collection and reporting. The indications provided by the technical specifications represent a common guideline for addressing the implementation of a subjective survey in the acoustic field, and to make investigations as comparable as possible. However, they do not cover all the fields of acoustic subjective investigations. Therefore, to make the collection of information from questionnaires more effective, it is useful to have a broader review of the issues that need to be addressed. To support this type of activity, this paper collects and presents relevant observations for the design of subjective survey questionnaires focused on outdoor acoustic quality. Drawing on previous research studies and experiences, it provides a series of observations on the main aspects to be considered in order to structure multipurpose acoustic evaluation questionnaires, including discussion of the general considerations for questionnaire structure, administration methods, population sample characterization, question formulation, and classification. It also deals with specific indications related to acoustic evaluations, such as the characteristics of annoying noise, boundary conditions, subjective feelings, and source features.