Marta L. S. Batista
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marta L. S. Batista has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- João Araújo Pereira Coutinho
University of Aveiro
9 shared publications - Catarina M. S. S. Neves
CICECO – Aveiro Institute of Materials, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal
4 shared publications - José Ferreira Gomes
CICECO – Aveiro Institute of Materials, Department of Chemistry, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
4 shared publications - Luciana I. N. Tomé
CICECO, Departamento de Química, Universidade de Aveiro, 3810-193 Aveiro, Portugal
2 shared publications - Mariana Conceição Costa
School of Chemical Engineering, Universidade Estadual de Campinas-UNICAMP, Campinas, Brazil
2 shared publications - Pedro Jorge Carvalho
University of Aveiro
2 shared publications
Latest Publications
- 9 January 2015
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 119 (4) , 1567-1578
Computational and Experimental Study of the Behavior of Cyano-Based Ionic Liquids in Aqueous Solution
The solvation of cyano- (CN-) based ionic liquids (ILs) and their capacity to establish hydrogen bonds (H-bonds) with water was studied by means of experimental and computational approaches. Experimentally, water activity data were measured for aqueous solutions of ILs based on 1-butyl-3-methylimidazolium ([BMIM]+) cation combined with one of the following anions: thiocyanate ([SCN]−), dicyanamide ([DCA]−), or tricyanomethanide ([TCM]−), and of 1-ethyl-3-methylimidazolium tetracyanoborate ([EMIM][TCB]). From the latter data, water activity coefficients were estimated showing that [BMIM][SCN] and [BMIM][DCA], unlike [BMIM][TCM] and [EMIM][TCB], are able to establish favorable interactions with water. Computationally, the conductor like screening model for real solvents (COSMO-RS) was used to estimate the water activity coefficients which compare well with the experimental ones. From the COSMO-RS results, it is suggested that the polarity of each ion composing the ILs has a strong effect on the solvation phenomena. Furthermore, classical molecular dynamics (MD) simulations were performed for obtaining an atomic level picture of the local molecular neighborhood of the different species. From the experimental and computational data it is showed that increasing the number of CN groups in the ILs’ anions does not enhance their ability to establish H-bonds with water but decreases their polarities, being [BMIM][DCA] and [BMIM][SCN] the ones presenting higher propensity to interact.
- 9 January 2015
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 119 (4) , 1567-1578
Computational and Experimental Study of the Behavior of Cyano-Based Ionic Liquids in Aqueous Solution
The solvation of cyano- (CN-) based ionic liquids (ILs) and their capacity to establish hydrogen bonds (H-bonds) with water was studied by means of experimental and computational approaches. Experimentally, water activity data were measured for aqueous solutions of ILs based on 1-butyl-3-methylimidazolium ([BMIM]+) cation combined with one of the following anions: thiocyanate ([SCN]−), dicyanamide ([DCA]−), or tricyanomethanide ([TCM]−), and of 1-ethyl-3-methylimidazolium tetracyanoborate ([EMIM][TCB]). From the latter data, water activity coefficients were estimated showing that [BMIM][SCN] and [BMIM][DCA], unlike [BMIM][TCM] and [EMIM][TCB], are able to establish favorable interactions with water. Computationally, the conductor like screening model for real solvents (COSMO-RS) was used to estimate the water activity coefficients which compare well with the experimental ones. From the COSMO-RS results, it is suggested that the polarity of each ion composing the ILs has a strong effect on the solvation phenomena. Furthermore, classical molecular dynamics (MD) simulations were performed for obtaining an atomic level picture of the local molecular neighborhood of the different species. From the experimental and computational data it is showed that increasing the number of CN groups in the ILs’ anions does not enhance their ability to establish H-bonds with water but decreases their polarities, being [BMIM][DCA] and [BMIM][SCN] the ones presenting higher propensity to interact.
- 1 April 2014
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 192, 26-31
Characterization of systems of thiophene and benzene with ionic liquids
- 1 April 2014
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 192, 26-31
Characterization of systems of thiophene and benzene with ionic liquids
- 1 April 2014
- Published by Bentham Science Publishers Ltd. in Current Physical Chemistry
- Vol. 4 (2) , 151-172
Prediction of Ionic Liquids Properties through Molecular Dynamics Simulations
Ionic liquids (ILs) are a new generation of molten salts possessing unique physical and chemical properties, which have gained attention from the academic and industries researchers. The design of new products and processes requires the knowledge of transport and thermophysical properties, yet, due to the large number of potential ILs, their characterization by experimental means alone is not feasible. Computer simulations are being used with success for the prediction of structures and properties of many different molecular systems. Among different computational approaches, molecular dynamics simulation (MD) has proved to be capable of providing a good understanding at the molecular level of how the structure and properties of ILs are related. This work reviews the literature and presents an outlook of methodologies applied to predict properties of neat ILs, namely, density, viscosity, diffusivity, melting point, enthalpy of vaporization and surface tension. It has been shown that MD simulations are able to reproduce properties of ILs with good enough accuracy for design purposes. However, lack of force field parameters for several different combinations of ILs and lack of accurate experimental data for some properties of ILs, crucial to calibrate the computational procedures, are some problems that still need to be addressed for a better characterization of the chemical and physical properties of ILs by computer simulation.
- 1 April 2014
- Published by Bentham Science Publishers Ltd. in Current Physical Chemistry
- Vol. 4 (2) , 151-172
Prediction of Ionic Liquids Properties through Molecular Dynamics Simulations
Ionic liquids (ILs) are a new generation of molten salts possessing unique physical and chemical properties, which have gained attention from the academic and industries researchers. The design of new products and processes requires the knowledge of transport and thermophysical properties, yet, due to the large number of potential ILs, their characterization by experimental means alone is not feasible. Computer simulations are being used with success for the prediction of structures and properties of many different molecular systems. Among different computational approaches, molecular dynamics simulation (MD) has proved to be capable of providing a good understanding at the molecular level of how the structure and properties of ILs are related. This work reviews the literature and presents an outlook of methodologies applied to predict properties of neat ILs, namely, density, viscosity, diffusivity, melting point, enthalpy of vaporization and surface tension. It has been shown that MD simulations are able to reproduce properties of ILs with good enough accuracy for design purposes. However, lack of force field parameters for several different combinations of ILs and lack of accurate experimental data for some properties of ILs, crucial to calibrate the computational procedures, are some problems that still need to be addressed for a better characterization of the chemical and physical properties of ILs by computer simulation.
- 12 February 2014
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 140 (6) , 064505
Understanding the impact of the central atom on the ionic liquid behavior: Phosphonium vs ammonium cations
The influence of the cation's central atom in the behavior of pairs of ammonium- and phosphonium-based ionic liquids was investigated through the measurement of densities, viscosities, melting temperatures, activity coefficients at infinite dilution, refractive indices, and toxicity against Vibrio fischeri. All the properties investigated are affected by the cation's central atom nature, with ammonium-based ionic liquids presenting higher densities, viscosities, melting temperatures, and enthalpies. Activity coefficients at infinite dilution show the ammonium-based ionic liquids to present slightly higher infinite dilution activity coefficients for non-polar solvents, becoming slightly lower for polar solvents, suggesting that the ammonium-based ionic liquids present somewhat higher polarities. In good agreement these compounds present lower toxicities than the phosphonium congeners. To explain this behavior quantum chemical gas phase DFT calculations were performed on isolated ion pairs at the BP-TZVP level of theory. Electronic density results were used to derive electrostatic potentials of the identified minimum conformers. Electrostatic potential-derived CHelpG and Natural Population Analysis charges show the P atom of the tetraalkylphosphonium-based ionic liquids cation to be more positively charged than the N atom in the tetraalkylammonium-based analogous IL cation, and a noticeable charge delocalization occurring in the tetraalkylammonium cation, when compared with the respective phosphonium congener. It is argued that this charge delocalization is responsible for the enhanced polarity observed on the ammonium based ionic liquids explaining the changes in the thermophysical properties observed.
- 12 February 2014
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 140 (6) , 064505
Understanding the impact of the central atom on the ionic liquid behavior: Phosphonium vs ammonium cations
The influence of the cation's central atom in the behavior of pairs of ammonium- and phosphonium-based ionic liquids was investigated through the measurement of densities, viscosities, melting temperatures, activity coefficients at infinite dilution, refractive indices, and toxicity against Vibrio fischeri. All the properties investigated are affected by the cation's central atom nature, with ammonium-based ionic liquids presenting higher densities, viscosities, melting temperatures, and enthalpies. Activity coefficients at infinite dilution show the ammonium-based ionic liquids to present slightly higher infinite dilution activity coefficients for non-polar solvents, becoming slightly lower for polar solvents, suggesting that the ammonium-based ionic liquids present somewhat higher polarities. In good agreement these compounds present lower toxicities than the phosphonium congeners. To explain this behavior quantum chemical gas phase DFT calculations were performed on isolated ion pairs at the BP-TZVP level of theory. Electronic density results were used to derive electrostatic potentials of the identified minimum conformers. Electrostatic potential-derived CHelpG and Natural Population Analysis charges show the P atom of the tetraalkylphosphonium-based ionic liquids cation to be more positively charged than the N atom in the tetraalkylammonium-based analogous IL cation, and a noticeable charge delocalization occurring in the tetraalkylammonium cation, when compared with the respective phosphonium congener. It is argued that this charge delocalization is responsible for the enhanced polarity observed on the ammonium based ionic liquids explaining the changes in the thermophysical properties observed.
- 15 May 2012
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 116 (20) , 5985-5992
The Origin of the LCST on the Liquid–Liquid Equilibrium of Thiophene with Ionic Liquids
Mixtures of thiophene with two ionic liquids, namely, [C4C1im][SCN] and [C4C1im][NTf2], were chosen as prototypes of systems presenting lower critical solution temperature (LCST) and upper critical solution temperature (UCST) behavior, respectively. This distinct behavior is due to different interactions between the constituting species which are investigated here by means of experimental and computational studies. Experimentally, density measurements were conducted to assess the excess molar volumes and 1H and 13C NMR spectroscopies were used to obtain the corresponding nuclear chemical shifts with respect to those measured for the pure ionic liquids. Computationally, molecular dynamics simulations were performed to analyze the radial distribution neighborhoods of each species. Negative values of excess molar volumes and strong positive chemical shift deviations for [C4C1im][SCN] systems, along with results obtained from MD simulations, allowed the identification of specific interactions between [SCN]− anion and the molecular solvent (thiophene), which are not observed for [NTf2]−. It is suggested that these specific [SCN]−–thiophene interactions are responsible for the LCST behavior observed for mixtures of thiophene with ionic liquids.
- 15 May 2012
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 116 (20) , 5985-5992
The Origin of the LCST on the Liquid–Liquid Equilibrium of Thiophene with Ionic Liquids
Mixtures of thiophene with two ionic liquids, namely, [C4C1im][SCN] and [C4C1im][NTf2], were chosen as prototypes of systems presenting lower critical solution temperature (LCST) and upper critical solution temperature (UCST) behavior, respectively. This distinct behavior is due to different interactions between the constituting species which are investigated here by means of experimental and computational studies. Experimentally, density measurements were conducted to assess the excess molar volumes and 1H and 13C NMR spectroscopies were used to obtain the corresponding nuclear chemical shifts with respect to those measured for the pure ionic liquids. Computationally, molecular dynamics simulations were performed to analyze the radial distribution neighborhoods of each species. Negative values of excess molar volumes and strong positive chemical shift deviations for [C4C1im][SCN] systems, along with results obtained from MD simulations, allowed the identification of specific interactions between [SCN]− anion and the molecular solvent (thiophene), which are not observed for [NTf2]−. It is suggested that these specific [SCN]−–thiophene interactions are responsible for the LCST behavior observed for mixtures of thiophene with ionic liquids.
- 28 September 2011
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 115 (44) , 12879-12888
Chameleonic Behavior of Ionic Liquids and Its Impact on the Estimation of Solubility Parameters
The possibility of developing a scale for solubility parameters, with the purpose of predicting the performance and aiding the selection of ILs, was evaluated. For the estimation of solubility parameters, infinite-dilution activity coefficient data were used. The results allowed the identification of a curious behavior for ILs that seem to present more than one solubility parameter, acting as polar molecules in some situations and as nonpolar molecules in others, depending on the medium. This behavior was confirmed by solubility measurements of [C4MIM][PF6] in solvent mixtures. In this work, the solubility parameters were also estimated from other properties, namely, viscosities and enthalpies of vaporization, and the relation between the various sets of solubility parameters is discussed. The results obtained suggest that, given the complexity of IL molecules and their liquid phases, a one-dimensional scale for solubility parameters that is able to characterize these fluids is not feasible.
- 28 September 2011
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 115 (44) , 12879-12888
Chameleonic Behavior of Ionic Liquids and Its Impact on the Estimation of Solubility Parameters
The possibility of developing a scale for solubility parameters, with the purpose of predicting the performance and aiding the selection of ILs, was evaluated. For the estimation of solubility parameters, infinite-dilution activity coefficient data were used. The results allowed the identification of a curious behavior for ILs that seem to present more than one solubility parameter, acting as polar molecules in some situations and as nonpolar molecules in others, depending on the medium. This behavior was confirmed by solubility measurements of [C4MIM][PF6] in solvent mixtures. In this work, the solubility parameters were also estimated from other properties, namely, viscosities and enthalpies of vaporization, and the relation between the various sets of solubility parameters is discussed. The results obtained suggest that, given the complexity of IL molecules and their liquid phases, a one-dimensional scale for solubility parameters that is able to characterize these fluids is not feasible.
- 12 August 2010
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 55 (11) , 5065-5073
Thermophysical Properties and Water Saturation of [PF6]-Based Ionic Liquids
- 12 August 2010
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 55 (11) , 5065-5073
Thermophysical Properties and Water Saturation of [PF6]-Based Ionic Liquids
- 11 March 2010
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 24 (4) , 2667-2674
Measurement and Modeling of Biodiesel Cold-Flow Properties
- 11 March 2010
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 24 (4) , 2667-2674
Measurement and Modeling of Biodiesel Cold-Flow Properties
- 20 July 2009
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 23 (9) , 4625-4629
Crystallization Behavior of Mixtures of Fatty Acid Ethyl Esters with Ethyl Stearate
- 20 July 2009
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 23 (9) , 4625-4629
Crystallization Behavior of Mixtures of Fatty Acid Ethyl Esters with Ethyl Stearate