YCYue Chen

Yue Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yue Chen has a total of 534 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Simultaneous Optimization of Thermoelectric Transport and Mechanical Performance in Full‐Zintl CaCd 2 Sb 2 /Mg 3 Sb 2 Thermoelectric Modules

    by Kejia Liu, Ruihuan Cheng, Yujie Huang, Xiaofang Li, Wenhua Xue, Haiqi Li, Huajian Wu, Yuxin Sun, Jinsuo Hu, Dongyi Shen, et al.

    Achieving both high thermoelectric performance and robust mechanical strength remains a key pursuit for the practical deployment of thermoelectric applications. Herein, a solid‐solution approach is employed in CaCd 2 Sb 2 via alloying with EuMg 2 Sb 2 , achieving a synergistic optimization of electrical and phonon transport and mechanical performance. The incorporation of EuMg 2 Sb 2 facilitates band degeneracy, thereby substantially improving the electrical transport properties. Together with the reduced thermal conductivity, the optimized composition exhibits a peak zT of ∼ 1.4 at 750 K and an average zT of ∼ 0.81 between 300 and 750 K. Furthermore, solid‐solution strengthening markedly enhances the mechanical properties, thereby ensuring mechanical integrity for reliable device integration. Leveraging transient liquid phase bonding, a 2 × 2 full‐Zintl module combining this optimized p‐type material with Mg 3 Sb 2 ‐based n‐type legs achieves a conversion efficiency of ∼ 11% at a temperature difference of 422 K. This work highlights the viability of Zintl phases toward high‐efficiency thermoelectric modules.

  • Thermal conductivity in amorphous strontium titanate

    by Siu Ting Tai, Yue Chen

    Amorphous strontium titanate exhibits exceptional thermal and electronic properties critical for advanced semiconductor devices. However, its lattice thermal conductivity as a bulk material has not been reported. Its underlying structural characteristics and thermal transport mechanisms remain unexplored. Herein, we perform Green-Kubo molecular dynamics and Allen-Feldman analysis across 100--1800 K using the neuroevolution potentials trained on ab initio datasets. We report a low thermal conductivity (0.40 ${\mathrm{Wm}}^{\ensuremath{-}1}{\mathrm{K}}^{\ensuremath{-}1}$ at 300 K) with conventional glass-like thermal conductivity behavior across the temperature range below its recrystallization onset temperature at 800 K. This low lattice thermal conductivity stems from its structural complexity and dual localization mechanisms present within the amorphous perovskite framework. High-frequency modes confined within the disordered ${\mathrm{TiO}}_{6}$ polyhedra and a group of low-frequency modes involved Sr atom rattling, collectively enabling up to 29% localized vibrations, which is triple that of a conventional example of amorphous silica. Structural analysis shows contracted Ti-Ti distances and disrupted Sr networks create rattling cages for phonon trapping. Our work establishes atomic-scale design principles for disorder-mediated thermal suppression in perovskite-derived glasses, providing pathways to engineer thermal-insulating materials.

  • Open Access

    Interface‐Engineered Boosting of Phase Stability and Thermoelectric Performance of Ag 2 Se

    by Vaskuri C. S. Theja, Vaithinathan Karthikeyan, Sushantika Choudhary, May Thawda Phoo, Chi Shun Yeung, Dongyi Shen, Yue Chen, Vellaisamy A. L. Roy

    The development of advanced near‐room‐temperature thermoelectric materials is in high demand for low‐grade waste heat recovery applications. In this context, silver selenide (Ag 2 Se) emerged as a promising option that rivals the performance of traditional Bi 2 Te 3 while being more abundant. Nevertheless, its practical exploitation is constrained by its phase instability at elevated temperatures. Here, we present a composite engineering strategy that synergistically enhances phase stability and thermoelectric performance. The integration of secondary‐phase inclusions as pinning centers improves the phase stability of β‐Ag 2 Se and achieves a maximum figure of merit of 1.08 at 380 K, surpassing previously reported values for Ag 2 Se composites. This enhanced thermoelectric performance is attributed to the combined effects of energy filtering and phonon scattering mechanisms. For practical use, the fabricated single‐leg device delivers a power density of 26.6 mWcm −2 at ΔT = 80 K. These results highlight the promise of composite engineering as a scalable, viable approach to stabilizing and improving the performance of Ag 2 Se for waste‐heat recovery applications.

  • Open Access

    Vorticity-induced short-range ordering for heat insulation in anisotropically bonded CsAg2I3

    by Qingyu Bai, Long Yang, Zhiwei Chen, Changyuan Li, Ruihuan Cheng, Mingfang Shu, Jinfeng Zhu, Ziyue Liu, Yuyan Yang, Jiong Yang, et al.

    Vortical motion naturally occurs on various scales, from galaxies to skyrmions, influencing the dynamics of mass and information transport. Yet its impact on lattice dynamics in solids is rarely explored so far, primarily owing to the strong interatomic bonds in real materials that inhibit the actual transport of their constituent species. Here we investigate the effect of vortical modes of polarized phonons on the heat insulation of solid materials using synchrotron X-ray diffuse scattering and inelastic neutron scattering along with ab initio molecular dynamics simulations. We demonstrate this vortical vibration as well as its effect on thermal insulation in CsAg 2 I 3 , where the anisotropically bonded iodine atoms form the low-lying transverse optical phonons for enhancing scattering phase space. Moreover, the vortical modes, mainly arising from the chiral symmetric operations acting on the iodine sites, induce two-dimensional short-range-ordering of atomic clusters, lead to a substantially increased phonon scattering centers with a diameter on the order of ~2 primitive cells. This eventually results in extraordinary heat insulation in the single-crystalline CsAg 2 I 3 , exhibiting a thermal conductivity as low as 0.08 W/m-K at room temperature. This strategy establishes a material design paradigm for heat insulation and unveils an unexplored avenue for phonon transport manipulation.


  • Slight Na-site Zn2+ doping in Na3V2(PO4)3 enhances rate capability for sodium-ion batteries

    by Ruoyu Chen, Dongdong Li, Xinyu Zhang, Igor V. Zatovsky, Chao Gu, Marian Chufarov, Shilin Li, Ruihuan Cheng, Yue Chen, Wei Han, et al.

  • Open Access

    Shear vibration of clusters enabled ultralow thermal conductivity in Rb3Bi2I9 single crystals

    by Linjie Wu, Zhiwei Chen, Zesheng Zeng, Yueyue Cheng, Chuangyuan Li, Yue Chen, Zheng Zhou, Jun Luo, Yanzhong Pei

    The thermal transport in perovskites and their analogues is governed by the lattice chemistry of diverse structures, which is critically important for managing heat flux in functional devices. Here, we disclose the structural chemistry origin of the anisotropically low thermal conductivity in single-crystalline Rb3Bi2I9. Specifically, the eight BiI6 octahedra in the unit cell of Rb3Bi2I9 are separated into two clusters along the c-axis. Along the c-axis, the structure adopts a layered architecture in which strongly corner-shared BiI6 octahedra form robust two-dimensional sheets, while adjacent layers interact only through weak I-I contacts. This bonding hierarchy enables low-frequency in-plane shear vibrations of the entire cluster layers within the ab plane. Consequently, single-crystalline Rb3Bi2I9 exhibits an ultralow and nearly isotropic thermal conductivity of approximately 0.17 W/m-K at room temperature along both the c-axis and the direction perpendicular to it, a value that approaches the Cahill theoretical minimum and is also reproduced in fully dense polycrystalline samples. This work establishes low-frequency collective shear vibrations as an effective mechanism for suppressing thermal transport, offering a promising design strategy for advancing thermal functional materials including heat insulators and thermoelectrics.

  • Aliovalent-driven lattice vacancy design for enhancing the thermoelectric performance of SrAgSb Zintl phase

    by Kejia Liu, Min Li, Zezhu Zeng, Honghao Yao, Rui Huang, Xiaofang Li, Huajian Wu, Chengliang Xia, Chen Chen, Yue Chen, et al.


  • Partial Disruption of Coordination Bonds Triggers MOF Amorphization for Efficient Electrocatalytic Nitrate Reduction to Ammonia

    by Zhanning Liu, Yufei Shan, Longlong Fan, Yili Cao, Chen Wang, Yue Chen, Min Ma, Qiang Li, Qingzhong Xue, Jian Tian, et al.

    Amorphous metal‐organic frameworks ( a ‐MOFs) hold great promise for expanding the functional and structural landscape of traditional MOFs, yet their fabrication and local structural investigations remain a significant challenge. Herein, we propose a partial coordination bond disruption strategy for preparing a ‐MOFs from mixed‐ligand complexes. The M 2 (trz) 2 sq family ( M = Co, Zn, Cd; trz = 1,2,4‐triazolate; sq = squarate) features two different types of linkage: stronger M–trz–M connections that assemble into a flexible “wine‐rack” framework, and comparatively weaker M–sq–M connections that act as the supporting pillars. A comprehensive analysis combining synchrotron‐based powder X‐ray diffraction, X‐ray absorption fine structure (XAFS) spectroscopy, pair distribution function (PDF) analysis, and density functional theory (DFT) calculations reveals that, under thermal dehydration, the M–sq–M linkages are selectively broken. Meanwhile, the wine‐rack M–trz–M framework undergoes geometric distortion, ultimately leading to the loss of long‐range order. Benefiting from the abundance of coordinatively unsaturated cobalt sites, the a ‐Co 2 (trz) 2 sq shows remarkable electrocatalytic performance toward the nitrate reduction reaction (NO 3 RR) to ammonia, achieving a Faraday efficiency (FE) of up to 96.32%. This work unambiguously reveals the synergistic effect of partial coordination disruption in mixed‐ligand MOFs, potentially opening a new avenue for the rational design of functional a ‐MOFs.


  • Dominant influence of vibrational entropy on the phase transition in CoNi and related high-entropy alloys

    by Chenhui Hu, Lingrui Fan, Li Zhu, Weixia Dong, Xiyang Li, Huaican Chen, Wen Yin, Douglas L. Abernathy, Wing Chi Yu, Yue Chen, et al.

  • Open Access

    Investigating the structural evolution of lithium zirconium nitrochloride solid electrolytes for all-solid-state batteries

    by Denys Butenko, Xinyu Zhang, Martin T. Dove, Jo-Chi Tseng, Yuanpeng Zhang, Pengcheng Yu, Jian Chen, Chao Gu, Shuoxiao Zhang, Jiuwei Lei, et al.

    All-solid-state batteries with inorganic solid electrolytes are a global trend in the development of next-generation energy storage devices, promising greatly simplified designs, increased energy density, and, perhaps most importantly, enhanced safety. Currently, the anion-mixed strategy for all-solid-state batteries is the mainstream for developing amorphous halide solid electrolytes, opening up good possibilities for creating conductors with high ionic conductivity and stability. Here, we show the structure evolution of amorphous solid electrolyte, Li3xZrCl4Nx (0.17 ≤ x ≤ 1), demonstrating ionic conductivities of up to 3.21 × 10-3 S∙cm-1 at 30°C, suggesting that the formation of nitrogen-containing frameworks is crucial for enhancing ionic conductivity. The structural evolution during the mechanochemical reaction, revealed by in situ time-resolved synchrotron X-ray diffraction, highlights the advantages of mixed-anion chemistry and clarifies the formation pathway of the dual-anion electrolyte. In addition, nitrogen incorporation into amorphous electrolyte provides enhanced mechanical deformability and leads to promising electrochemical performance over a wide temperature range. In particular, the dual-anion solid electrolyte maintains stable operation at lower temperatures when coupled with a LiIn negative electrode, highlighting the broader potential of anion-mixed design for all-solid-state batteries.