Matthias Wilhelm
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Matthias Wilhelm has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Jens B. Schmitt
12 shared publicationsIvan Martinovic
University of Oxford, UK
11 shared publicationsVincent Lenders
7 shared publicationsFrank A. Zdarsky
3 shared publications- Martin Strohmeier
OpenSky Network
3 shared publications - Domenico Giustiniano
IMDEA Networks Institute, Legans, Madrid, Spain
2 shared publications
Latest Publications
- 20 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 13 (12) , 6756-6767
On the Reception of Concurrent Transmissions in Wireless Sensor Networks
Numerous studies have shown that concurrent transmissions can help boost wireless network performance despite the possibility of packet collisions. However, while these works provide empirical evidence that concurrent transmissions may be received reliably, existing signal capture models only partially explain the root causes of this phenomenon. We present a comprehensive mathematical model for MSK-modulated signals that makes the reasons explicit and thus provides fundamental insights into the key parameters governing the successful reception of colliding transmissions. A major contribution is the closed-form derivation of the receiver bit decision variable for an arbitrary number of colliding signals and constellations of power ratios, time offsets, and carrier phase offsets. We systematically explore the factors for successful packet delivery under concurrent transmissions across the whole parameter space of the model. We confirm the capture threshold behavior observed in previous studies but also reveal new insights relevant to the design of optimal protocols. We identify capture zones depending not only on the signal power ratio but also on time and phase offsets.
- 20 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 13 (12) , 6756-6767
On the Reception of Concurrent Transmissions in Wireless Sensor Networks
Numerous studies have shown that concurrent transmissions can help boost wireless network performance despite the possibility of packet collisions. However, while these works provide empirical evidence that concurrent transmissions may be received reliably, existing signal capture models only partially explain the root causes of this phenomenon. We present a comprehensive mathematical model for MSK-modulated signals that makes the reasons explicit and thus provides fundamental insights into the key parameters governing the successful reception of colliding transmissions. A major contribution is the closed-form derivation of the receiver bit decision variable for an arbitrary number of colliding signals and constellations of power ratios, time offsets, and carrier phase offsets. We systematically explore the factors for successful packet delivery under concurrent transmissions across the whole parameter space of the model. We confirm the capture threshold behavior observed in previous studies but also reveal new insights relevant to the design of optimal protocols. We identify capture zones depending not only on the signal power ratio but also on time and phase offsets.
- Top Cited Papers
- 1 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 83-94
Bringing up OpenSky: A large-scale ADS-B sensor network for research
Automatic Dependent Surveillance-Broadcast (ADS-B) is one of the key components of the next generation air transportation system. Since ADS-B will become mandatory by 2020 for most airspaces, it is important that aspects such as capacity, applications, and security are investigated by an independent research community. However, large-scale real-world data was previously only accessible to a few closed industrial and governmental groups because it required specialized and expensive equipment. To enable researchers to conduct experimental studies based on real data, we developed OpenSky, a sensor network based on low-cost hardware connected over the Internet. OpenSky is based on off-the-shelf ADS-B sensors distributed to volunteers throughout Central Europe. It covers 720,000 km 2 , is able to capture more than 30% of the commercial air traffic in Europe, and enables researchers to analyze billions of ADS-B messages. In this paper, we report on the challenges we faced during the development and deployment of this participatory network and the insights we gained over the last two years of operations as a service to academic research groups. We go on to provide real-world insights about the possibilities and limitations of such low-cost sensor networks concerning air traffic surveillance and further applications such as multilateration.
- 1 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 83-94
Top Cited PapersBringing up OpenSky: A large-scale ADS-B sensor network for research
Automatic Dependent Surveillance-Broadcast (ADS-B) is one of the key components of the next generation air transportation system. Since ADS-B will become mandatory by 2020 for most airspaces, it is important that aspects such as capacity, applications, and security are investigated by an independent research community. However, large-scale real-world data was previously only accessible to a few closed industrial and governmental groups because it required specialized and expensive equipment. To enable researchers to conduct experimental studies based on real data, we developed OpenSky, a sensor network based on low-cost hardware connected over the Internet. OpenSky is based on off-the-shelf ADS-B sensors distributed to volunteers throughout Central Europe. It covers 720,000 km 2 , is able to capture more than 30% of the commercial air traffic in Europe, and enables researchers to analyze billions of ADS-B messages. In this paper, we report on the challenges we faced during the development and deployment of this participatory network and the insights we gained over the last two years of operations as a service to academic research groups. We go on to provide real-world insights about the possibilities and limitations of such low-cost sensor networks concerning air traffic surveillance and further applications such as multilateration.
- 1 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 313-314
Demonstration abstract: OpenSky — A large-scale ADS-B sensor network for research
The future of air traffic control (ATC) will heavily depend on the Automatic Dependent Surveillance - Broadcast (ADS-B) protocol as a crucial component. ADS-B marks a paradigm change in airspace monitoring as global ATC is switching from an independent, radar-based approach to dependent, satellite-supported surveillance. With ADS-B, aircraft broadcast their own position and other information in short periodic messages to other aircraft and control stations on the ground. As the protocol is becoming mandatory in most airspaces over the next years, it is important that its characteristics and challenges are thoroughly investigated. The large-scale ADS-B data required to do this has not been openly accessible until now, as specialized and expensive infrastructure was needed. We demonstrate OpenSky, a sensor network based on low-cost hardware connected over the Internet, which enables real-world experimental studies. OpenSky works with off-the-shelf sensors run by volunteers distributed over Central Europe. Currently comprising 11 sensors, the sensor network covers an area of 720,000 km 2 . We capture more than 30% of Europe's commercial air traffic, offering access to billions of ADS-B messages.
- 1 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 313-314
Demonstration abstract: OpenSky — A large-scale ADS-B sensor network for research
The future of air traffic control (ATC) will heavily depend on the Automatic Dependent Surveillance - Broadcast (ADS-B) protocol as a crucial component. ADS-B marks a paradigm change in airspace monitoring as global ATC is switching from an independent, radar-based approach to dependent, satellite-supported surveillance. With ADS-B, aircraft broadcast their own position and other information in short periodic messages to other aircraft and control stations on the ground. As the protocol is becoming mandatory in most airspaces over the next years, it is important that its characteristics and challenges are thoroughly investigated. The large-scale ADS-B data required to do this has not been openly accessible until now, as specialized and expensive infrastructure was needed. We demonstrate OpenSky, a sensor network based on low-cost hardware connected over the Internet, which enables real-world experimental studies. OpenSky works with off-the-shelf sensors run by volunteers distributed over Central Europe. Currently comprising 11 sensors, the sensor network covers an area of 720,000 km 2 . We capture more than 30% of Europe's commercial air traffic, offering access to billions of ADS-B messages.
- 6 February 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 13 (3) , 1593-1603
Detection of Reactive Jamming in DSSS-based Wireless Communications
Reactive jammers have been shown to be a serious threat for wireless communication. Despite this, it is difficult to detect their presence reliably. We propose a novel method to detect such sophisticated jammers in direct sequence spread spectrum (DSSS) wireless communication systems. The key idea is to extract statistics from the jamming-free symbols of the DSSS synchronizer to discern jammed packets from those lost due to bad channel conditions. Our contribution is twofold. First, we experimentally evaluate new empirical models utilizing the preamble symbols of IEEE 802.15.4 packets, thus enabling the accurate prediction of the packet delivery ratio (PDR). We show that the chip error rate-based metric is superior to metrics used in the literature, offering an accurate and reactive indicator of the true PDR. Our second contribution is the design and evaluation of a detection technique relying on this metric to detect reactive jammers. We build a software-defined radio testbed and show that our technique enables the error-free detection of reactive jammers that jam all packets on links with a PDR above 0.3. To the best of our knowledge, our detector is the first to detect reactive jamming attacks targeting the physical layer header of DSSS packets, and does not require any modifications of the wireless communication system.
- 6 February 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 13 (3) , 1593-1603
Detection of Reactive Jamming in DSSS-based Wireless Communications
Reactive jammers have been shown to be a serious threat for wireless communication. Despite this, it is difficult to detect their presence reliably. We propose a novel method to detect such sophisticated jammers in direct sequence spread spectrum (DSSS) wireless communication systems. The key idea is to extract statistics from the jamming-free symbols of the DSSS synchronizer to discern jammed packets from those lost due to bad channel conditions. Our contribution is twofold. First, we experimentally evaluate new empirical models utilizing the preamble symbols of IEEE 802.15.4 packets, thus enabling the accurate prediction of the packet delivery ratio (PDR). We show that the chip error rate-based metric is superior to metrics used in the literature, offering an accurate and reactive indicator of the true PDR. Our second contribution is the design and evaluation of a detection technique relying on this metric to detect reactive jammers. We build a software-defined radio testbed and show that our technique enables the error-free detection of reactive jammers that jam all packets on links with a PDR above 0.3. To the best of our knowledge, our detector is the first to detect reactive jamming attacks targeting the physical layer header of DSSS packets, and does not require any modifications of the wireless communication system.
- 26 August 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 31 (9) , 1779-1790
Secure Key Generation in Sensor Networks Based on Frequency-Selective Channels
Key management in wireless sensor networks faces several unique challenges. The scale, resource limitations, and new threats such as node capture suggest the use of in-network key generation. However, the cost of such schemes is often high because their security is based on computational complexity. Recently, several research contributions justified experimentally that the wireless channel itself can be used to generate information-theoretic secure keys. By exchanging sampling messages during device movement, a bit string is derived known only to the two involved entities. Yet, movement is not the only option to generate randomness: the channel response strongly depends on the signal frequency as well. In this work, we introduce a key generation protocol based on the frequency-selectivity of multipath fading channels. The practical advantage of this approach is that it does not require device movement during key establishment. Thus the frequent case of a sensor network with static nodes is supported. We show the protocol's applicability by implementing it on MICAz motes, and evaluating its robustness and security through experiments and analysis. The error correction property of the protocol mitigates the effects of measurement errors and temporal effects, giving rise to an agreement rate of over 97 %.
- 26 August 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 31 (9) , 1779-1790
Secure Key Generation in Sensor Networks Based on Frequency-Selective Channels
Key management in wireless sensor networks faces several unique challenges. The scale, resource limitations, and new threats such as node capture suggest the use of in-network key generation. However, the cost of such schemes is often high because their security is based on computational complexity. Recently, several research contributions justified experimentally that the wireless channel itself can be used to generate information-theoretic secure keys. By exchanging sampling messages during device movement, a bit string is derived known only to the two involved entities. Yet, movement is not the only option to generate randomness: the channel response strongly depends on the signal frequency as well. In this work, we introduce a key generation protocol based on the frequency-selectivity of multipath fading channels. The practical advantage of this approach is that it does not require device movement during key establishment. Thus the frequent case of a sensor network with static nodes is supported. We show the protocol's applicability by implementing it on MICAz motes, and evaluating its robustness and security through experiments and analysis. The error correction property of the protocol mitigates the effects of measurement errors and temporal effects, giving rise to an agreement rate of over 97 %.
- Open Access
- 17 April 2013
- Published by Association for Computing Machinery (ACM)
- p. 43-48
Detection of reactive jamming in DSSS-based wireless networks
We propose a novel approach to detect reactive jammers in direct sequence spread spectrum (DSSS) wireless networks. The key idea is to use the chip error rate of the first few jamming-free symbols at the DSSS demodulator during the signal synchronization phase of regular packet reception to estimate the probability of successful packet delivery. If the estimated probability is significantly higher than the actual packet delivery ratio, we declare jamming. As a proof of concept, we implement a prototype in a network of three USRP software-defined radios (transmitter, receiver, and jammer) and evaluate the feasibility, responsiveness, and accuracy of our approach in a controlled lab environment. Our experiments with IEEE 802.15.4 DSSS-based communication show that for links with a jamming-free packet delivery probability above 0.5, the false positive and negative detection rates remain below 5%.
- 17 April 2013
- Published by Association for Computing Machinery (ACM)
- p. 43-48
Open AccessDetection of reactive jamming in DSSS-based wireless networks
We propose a novel approach to detect reactive jammers in direct sequence spread spectrum (DSSS) wireless networks. The key idea is to use the chip error rate of the first few jamming-free symbols at the DSSS demodulator during the signal synchronization phase of regular packet reception to estimate the probability of successful packet delivery. If the estimated probability is significantly higher than the actual packet delivery ratio, we declare jamming. As a proof of concept, we implement a prototype in a network of three USRP software-defined radios (transmitter, receiver, and jammer) and evaluate the feasibility, responsiveness, and accuracy of our approach in a controlled lab environment. Our experiments with IEEE 802.15.4 DSSS-based communication show that for links with a jamming-free packet delivery probability above 0.5, the false positive and negative detection rates remain below 5%.
- 1 January 2012
- Published by Springer Nature
- p. 235-252
A Practical Man-In-The-Middle Attack on Signal-Based Key Generation Protocols
- 1 January 2012
- Published by Springer Nature
- p. 235-252
A Practical Man-In-The-Middle Attack on Signal-Based Key Generation Protocols
- Open Access
- 15 August 2011
- Published by Association for Computing Machinery (ACM)
- Vol. 41 (4) , 456-457
WiFire
Firewalls are extremely effective at enforcing security policies in wired networks. Perhaps surprisingly, firewalls are entirely nonexistent in the wireless domain. Yet, the need to selectively control and block radio communication is particularly high in a broadcast environment since any node may receive and send packets. In this demo, we present WiFire, a system that brings the firewall concept to wireless networks. First, WiFire detects and analyzes packets during their transmission, checking their content against a set of rules. It then relies on reactive jamming techniques to selectively block undesired communication. We show the feasibility and performance of WiFire, which is implemented on the USRP2 software-defined radio platform, in several scenarios with IEEE 802.15.4 radios. WiFire is able to classify and effectively block undesired communication without interfering with desired communication
- 15 August 2011
- Published by Association for Computing Machinery (ACM)
- Vol. 41 (4) , 456-457
Open AccessWiFire
Firewalls are extremely effective at enforcing security policies in wired networks. Perhaps surprisingly, firewalls are entirely nonexistent in the wireless domain. Yet, the need to selectively control and block radio communication is particularly high in a broadcast environment since any node may receive and send packets. In this demo, we present WiFire, a system that brings the firewall concept to wireless networks. First, WiFire detects and analyzes packets during their transmission, checking their content against a set of rules. It then relies on reactive jamming techniques to selectively block undesired communication. We show the feasibility and performance of WiFire, which is implemented on the USRP2 software-defined radio platform, in several scenarios with IEEE 802.15.4 radios. WiFire is able to classify and effectively block undesired communication without interfering with desired communication
- 1 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 29, 1-6
SUDOKU: Secure and usable deployment of keys on wireless sensors
Initial deployment of secrets plays a crucial role in any security design, but especially in hardware constrained wireless sensor networks. Many key management schemes assume either manually pre-installed shared secrets or keys authenticated with the aid of out-of-band channels. While manually installing secret keys affects the practicability of the key deployment, out-of-band channels require additional interfaces of already hardware-limited wireless sensor nodes. In this work, we present a key deployment protocol that uses pair-wise ephemeral keys generated from physical layer information which subsequently enables an authenticated exchange of public keys. Hence, this work presents an elegant solution to the key deployment problem without requiring more capabilities than already available on common low-cost devices. To justify the feasibility of this solution, we implement and experimentally evaluate the proposed key deployment protocol using commodity wireless sensor motes.
- 1 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 29, 1-6
SUDOKU: Secure and usable deployment of keys on wireless sensors
Initial deployment of secrets plays a crucial role in any security design, but especially in hardware constrained wireless sensor networks. Many key management schemes assume either manually pre-installed shared secrets or keys authenticated with the aid of out-of-band channels. While manually installing secret keys affects the practicability of the key deployment, out-of-band channels require additional interfaces of already hardware-limited wireless sensor nodes. In this work, we present a key deployment protocol that uses pair-wise ephemeral keys generated from physical layer information which subsequently enables an authenticated exchange of public keys. Hence, this work presents an elegant solution to the key deployment problem without requiring more capabilities than already available on common low-cost devices. To justify the feasibility of this solution, we implement and experimentally evaluate the proposed key deployment protocol using commodity wireless sensor motes.