Raju Sinha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Raju Sinha has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Nezih Pala
Florida International University
9 shared publications Mustafa Karabiyik
Department of Electrical and Computer Engineering Florida International University Miami FL 33174 USA
6 shared publications- Arash Ahmadivand
Metamaterial Technologies Inc. (META) Pleasanton CA 94588 USA
5 shared publications Burak Gerislioglu
Department of Electrical and Computer Engineering Florida International University Miami FL 33174 USA
2 shared publicationsChowdhury Al-Amin
Department of Electrical and Computer Engineering, Florida International University, Miami, USA
2 shared publications- Phani Kiran Vabbina
INSYST Laboratory, Electrical and Computer Engineering, and ‡Advance Ceramic Group, Mechanical and Materials Engineering, Florida International University , Miami, Florida 33174, United States
2 shared publications
Latest Publications
- Open Access
- 11 September 2017
- Published by Wiley in Advanced Electronic Materials
- Vol. 3 (9)
Reconfigurable Antennae: VO2‐Based Reconfigurable Antenna Platform with Addressable Microheater Matrix (Adv. Electron. Mater. 9/2017)
- 11 September 2017
- Published by Wiley in Advanced Electronic Materials
- Vol. 3 (9)
Open AccessReconfigurable Antennae: VO2‐Based Reconfigurable Antenna Platform with Addressable Microheater Matrix (Adv. Electron. Mater. 9/2017)
- 21 June 2017
- Published by Wiley in Advanced Electronic Materials
- Vol. 3 (9)
VO2‐Based Reconfigurable Antenna Platform with Addressable Microheater Matrix
This study reports on a reconfigurable antenna platform based on vanadium dioxide (VO2), a phase‐change material (PCM) with low transition temperature, integrated with an addressable microheater matrix. For the first time, it is shown that an entire planar antenna can be thermally reconfigured virtually to any pattern by switching the phase of the selected regions of the VO2 layer from insulator to metallic state by indirect thermal stimuli generated by individually addressable nichrome resistive microheaters. Careful selection of the individual pixels to start the phase transition from insulator (OFF) to metallic (ON) state allows creating different antenna patterns with unique resonance properties. Reconfiguring the antenna into different patterns, operating frequency can be tuned from C‐band (4–8 GHz) to X‐band (8–12 GHz), and S‐band (2–4 GHz) frequencies which cover the entire ultra wideband spectrum (3.1–10.6 GHz). The proposed approach provides a promising platform for designing monolithically integrated reconfigurable antennas, radio frequency devices, and circuits for various applications.
- 21 June 2017
- Published by Wiley in Advanced Electronic Materials
- Vol. 3 (9)
VO2‐Based Reconfigurable Antenna Platform with Addressable Microheater Matrix
This study reports on a reconfigurable antenna platform based on vanadium dioxide (VO2), a phase‐change material (PCM) with low transition temperature, integrated with an addressable microheater matrix. For the first time, it is shown that an entire planar antenna can be thermally reconfigured virtually to any pattern by switching the phase of the selected regions of the VO2 layer from insulator to metallic state by indirect thermal stimuli generated by individually addressable nichrome resistive microheaters. Careful selection of the individual pixels to start the phase transition from insulator (OFF) to metallic (ON) state allows creating different antenna patterns with unique resonance properties. Reconfiguring the antenna into different patterns, operating frequency can be tuned from C‐band (4–8 GHz) to X‐band (8–12 GHz), and S‐band (2–4 GHz) frequencies which cover the entire ultra wideband spectrum (3.1–10.6 GHz). The proposed approach provides a promising platform for designing monolithically integrated reconfigurable antennas, radio frequency devices, and circuits for various applications.
- 31 May 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (23) , 19791-19799
Sonochemical Synthesis of a Zinc Oxide Core–Shell Nanorod Radial p–n Homojunction Ultraviolet Photodetector
We report for the first time on the growth of a homogeneous radial p–n junction in the ZnO core–shell configuration with a p-doped ZnO nanoshell structure grown around a high-quality unintentionally n-doped ZnO nanorod using sonochemistry. The simultaneous decomposition of phosphorous (P), zinc (Zn), and oxygen (O) from their respective precursors during sonication allows for the successful incorporation of P atoms into the ZnO lattice. The as-formed p–n junction shows a rectifying current–voltage characteristic that is consistent with a p–n junction with a threshold voltage of 1.3 V and an ideality factor of 33. The concentration of doping was estimated to be NA = 6.7 × 1017 cm–3 on the p side from the capacitance–voltage measurements. The fabricated radial p–n junction demonstrated a record optical responsivity of 9.64 A/W and a noise equivalent power of 0.573 pW/√Hz under ultraviolet illumination, which is the highest for ZnO p–n junction devices.
- 31 May 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (23) , 19791-19799
Sonochemical Synthesis of a Zinc Oxide Core–Shell Nanorod Radial p–n Homojunction Ultraviolet Photodetector
We report for the first time on the growth of a homogeneous radial p–n junction in the ZnO core–shell configuration with a p-doped ZnO nanoshell structure grown around a high-quality unintentionally n-doped ZnO nanorod using sonochemistry. The simultaneous decomposition of phosphorous (P), zinc (Zn), and oxygen (O) from their respective precursors during sonication allows for the successful incorporation of P atoms into the ZnO lattice. The as-formed p–n junction shows a rectifying current–voltage characteristic that is consistent with a p–n junction with a threshold voltage of 1.3 V and an ideality factor of 33. The concentration of doping was estimated to be NA = 6.7 × 1017 cm–3 on the p side from the capacitance–voltage measurements. The fabricated radial p–n junction demonstrated a record optical responsivity of 9.64 A/W and a noise equivalent power of 0.573 pW/√Hz under ultraviolet illumination, which is the highest for ZnO p–n junction devices.
- Open Access
- 1 June 2016
- Published by AIP Publishing in AIP Advances
- Vol. 6 (6) , 065102
Resonance coupling in plasmonic nanomatryoshka homo- and heterodimers
Here, we examine the electromagnetic (EM) energy coupling and hybridization of plasmon resonances between closely spaced concentric nanoshells known as “nanomatryoshka” (NM) units in symmetric and antisymmetric compositions using the Finite Difference Time Domain (FDTD) analysis. Utilizing plasmon hybridization model, we calculated the energy level diagrams and verified that, in the symmetric dimer (in-phase mode in a homodimer), plasmonic bonding modes are dominant and tunable within the considered bandwidth. In contrast, in the antisymmetric dimer (out-of-phase mode in a heterodimer), due to the lack of the geometrical symmetry, new antibonding modes appear in the extinction profile, and this condition gives rise to repeal of dipolar field coupling. We also studied the extinction spectra and positions of the antibonding and bonding modes excited due to the energy coupling between silver and gold NM units in a heterodimer structure. Our analysis suggest abnormal shifts in the higher energy modes. We propose a method to analyze the behavior of multilayer concentric nanoshell particles in an antisymmetric orientation employing full dielectric function calculations and the Drude model based on interband transitions in metallic components. This study provides a method to predict the behavior of the higher energy plasmon resonant modes in entirely antisymmetric structures such as compositional heterodimers.
- 1 June 2016
- Published by AIP Publishing in AIP Advances
- Vol. 6 (6) , 065102
Open AccessResonance coupling in plasmonic nanomatryoshka homo- and heterodimers
Here, we examine the electromagnetic (EM) energy coupling and hybridization of plasmon resonances between closely spaced concentric nanoshells known as “nanomatryoshka” (NM) units in symmetric and antisymmetric compositions using the Finite Difference Time Domain (FDTD) analysis. Utilizing plasmon hybridization model, we calculated the energy level diagrams and verified that, in the symmetric dimer (in-phase mode in a homodimer), plasmonic bonding modes are dominant and tunable within the considered bandwidth. In contrast, in the antisymmetric dimer (out-of-phase mode in a heterodimer), due to the lack of the geometrical symmetry, new antibonding modes appear in the extinction profile, and this condition gives rise to repeal of dipolar field coupling. We also studied the extinction spectra and positions of the antibonding and bonding modes excited due to the energy coupling between silver and gold NM units in a heterodimer structure. Our analysis suggest abnormal shifts in the higher energy modes. We propose a method to analyze the behavior of multilayer concentric nanoshell particles in an antisymmetric orientation employing full dielectric function calculations and the Drude model based on interband transitions in metallic components. This study provides a method to predict the behavior of the higher energy plasmon resonant modes in entirely antisymmetric structures such as compositional heterodimers.
- Open Access
- 10 May 2016
- Published by MDPI AG in Nanomaterials
- Vol. 6 (5) , 86
Graphene FETs with Low-Resistance Hybrid Contacts for Improved High Frequency Performance
This work proposes a novel geometry field effect transistor with graphene as a channel—graphene field-effect transistor (GFET), having a hybrid contact that consists of an ohmic source/drain and its extended part towards the gate, which is capacitively coupled to the channel. The ohmic contacts are used for direct current (DC) biasing, whereas their capacitive extension reduces access region length and provides the radio frequency (RF) signal a low impedance path. Minimization of the access region length, along with the paralleling of ohmic contact’s resistance and resistive part of capacitively coupled contact’s impedance, lower the overall source/drain resistance, which results in an increase in current gain cut-off frequency, fT. The DC and high-frequency characteristics of the two chosen conventional baseline GFETs, and their modified versions with proposed hybrid contacts, have been extensively studied, compared, and analyzed using numerical and analytical techniques.
- 10 May 2016
- Published by MDPI AG in Nanomaterials
- Vol. 6 (5) , 86
Open AccessGraphene FETs with Low-Resistance Hybrid Contacts for Improved High Frequency Performance
This work proposes a novel geometry field effect transistor with graphene as a channel—graphene field-effect transistor (GFET), having a hybrid contact that consists of an ohmic source/drain and its extended part towards the gate, which is capacitively coupled to the channel. The ohmic contacts are used for direct current (DC) biasing, whereas their capacitive extension reduces access region length and provides the radio frequency (RF) signal a low impedance path. Minimization of the access region length, along with the paralleling of ohmic contact’s resistance and resistive part of capacitively coupled contact’s impedance, lower the overall source/drain resistance, which results in an increase in current gain cut-off frequency, fT. The DC and high-frequency characteristics of the two chosen conventional baseline GFETs, and their modified versions with proposed hybrid contacts, have been extensively studied, compared, and analyzed using numerical and analytical techniques.
- 25 November 2015
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 37 (3) , 230-242
Tunable, Room Temperature CMOS-Compatible THz Emitters Based on Nonlinear Mixing in Microdisk Resonators
- 25 November 2015
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 37 (3) , 230-242
Tunable, Room Temperature CMOS-Compatible THz Emitters Based on Nonlinear Mixing in Microdisk Resonators
- 28 August 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9547, 954713
Graphene plasmonics: multiple sharp Fano resonances in silver split concentric nanoring/disk resonator dimers on a metasurface
We introduce a platform based on plasmonic metamaterials to design various optical devices. A simple structure brokenring with a nanodisk at the center is utilized to excite and hybridize the plasmon resonant modes. We show that the proposed nanoantenna is able to support strong sub- and superradiant plasmon resonances because of its unique geometrical features. Using the concentric ring/disk in a dimer orientation as a nanoantenna on a multilayer metasurface consisting of graphene monolayer, we induced double sharp plasmonic Fano resonant modes in the transmission window across the visible to the near-infrared region. Considering the strong polarization-dependency of the broken-ring/disk dimer antenna, it is shown that the proposed plasmonic metamaterial can be tailored as an optical router device for fast switching applications. This understanding opens new paths to employ plasmonic metamaterials with simple geometrical nanoscale blocks for sensing and switching applications.
- 28 August 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9547, 954713
Graphene plasmonics: multiple sharp Fano resonances in silver split concentric nanoring/disk resonator dimers on a metasurface
We introduce a platform based on plasmonic metamaterials to design various optical devices. A simple structure brokenring with a nanodisk at the center is utilized to excite and hybridize the plasmon resonant modes. We show that the proposed nanoantenna is able to support strong sub- and superradiant plasmon resonances because of its unique geometrical features. Using the concentric ring/disk in a dimer orientation as a nanoantenna on a multilayer metasurface consisting of graphene monolayer, we induced double sharp plasmonic Fano resonant modes in the transmission window across the visible to the near-infrared region. Considering the strong polarization-dependency of the broken-ring/disk dimer antenna, it is shown that the proposed plasmonic metamaterial can be tailored as an optical router device for fast switching applications. This understanding opens new paths to employ plasmonic metamaterials with simple geometrical nanoscale blocks for sensing and switching applications.
- 6 July 2015
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (28) , 15206-15213
Highly Sensitive Wide Bandwidth Photodetector Based on Internal Photoemission in CVD Grown p-Type MoS2/Graphene Schottky Junction
Two dimensional (2D) Molybdenum disulfide (MoS2) has evolved as a promising material for next generation optoelectronic devices owing to its unique electrical and optical properties, such as band gap modulation, high optical absorption, and increased luminescence quantum yield. The 2D MoS2 photodetectors reported in the literature have presented low responsivity compared to silicon based photodetectors. In this study, we assembled atomically thin p-type MoS2 with graphene to form a MoS2/graphene Schottky photodetector where photo generated holes travel from graphene to MoS2 over the Schottky barrier under illumination. We found that the p-type MoS2 forms a Schottky junction with graphene with a barrier height of 139 meV, which results in high photocurrent and wide spectral range of detection with wavelength selectivity. The fabricated photodetector showed excellent photosensitivity with a maximum photo responsivity of 1.26 AW–1 and a noise equivalent power of 7.8 × 10–12 W/√Hz at 1440 nm.
- 6 July 2015
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (28) , 15206-15213
Highly Sensitive Wide Bandwidth Photodetector Based on Internal Photoemission in CVD Grown p-Type MoS2/Graphene Schottky Junction
Two dimensional (2D) Molybdenum disulfide (MoS2) has evolved as a promising material for next generation optoelectronic devices owing to its unique electrical and optical properties, such as band gap modulation, high optical absorption, and increased luminescence quantum yield. The 2D MoS2 photodetectors reported in the literature have presented low responsivity compared to silicon based photodetectors. In this study, we assembled atomically thin p-type MoS2 with graphene to form a MoS2/graphene Schottky photodetector where photo generated holes travel from graphene to MoS2 over the Schottky barrier under illumination. We found that the p-type MoS2 forms a Schottky junction with graphene with a barrier height of 139 meV, which results in high photocurrent and wide spectral range of detection with wavelength selectivity. The fabricated photodetector showed excellent photosensitivity with a maximum photo responsivity of 1.26 AW–1 and a noise equivalent power of 7.8 × 10–12 W/√Hz at 1440 nm.
- Open Access
- 24 March 2015
- Published by Springer Nature in Scientific Reports
- Vol. 5 (1) , srep09422
Tunable Room Temperature THz Sources Based on Nonlinear Mixing in a Hybrid Optical and THz Micro-Ring Resonator
We propose and systematically investigate a novel tunable, compact room temperature terahertz (THz) source based on difference frequency generation in a hybrid optical and THz micro-ring resonator. We describe detailed design steps of the source capable of generating THz wave in 0.5–10 THz with a tunability resolution of 0.05 THz by using high second order optical susceptibility (χ(2)) in crystals and polymers. In order to enhance THz generation compared to bulk nonlinear material, we employ a nonlinear optical micro-ring resonator with high-Q resonant modes for infrared input waves. Another ring oscillator with the same outer radius underneath the nonlinear ring with an insulation of SiO2layer supports the generated THz with resonant modes and out-couples them into a THz waveguide. The phase matching condition is satisfied by engineering both the optical and THz resonators with appropriate effective indices. We analytically estimate THz output power of the device by using practical values of susceptibility in available crystals and polymers. The proposed source can enable tunable, compact THz emitters, on-chip integrated spectrometers, inspire a broader use of THz sources and motivate many important potential THz applications in different fields.
- 24 March 2015
- Published by Springer Nature in Scientific Reports
- Vol. 5 (1) , srep09422
Open AccessTunable Room Temperature THz Sources Based on Nonlinear Mixing in a Hybrid Optical and THz Micro-Ring Resonator
We propose and systematically investigate a novel tunable, compact room temperature terahertz (THz) source based on difference frequency generation in a hybrid optical and THz micro-ring resonator. We describe detailed design steps of the source capable of generating THz wave in 0.5–10 THz with a tunability resolution of 0.05 THz by using high second order optical susceptibility (χ(2)) in crystals and polymers. In order to enhance THz generation compared to bulk nonlinear material, we employ a nonlinear optical micro-ring resonator with high-Q resonant modes for infrared input waves. Another ring oscillator with the same outer radius underneath the nonlinear ring with an insulation of SiO2layer supports the generated THz with resonant modes and out-couples them into a THz waveguide. The phase matching condition is satisfied by engineering both the optical and THz resonators with appropriate effective indices. We analytically estimate THz output power of the device by using practical values of susceptibility in available crystals and polymers. The proposed source can enable tunable, compact THz emitters, on-chip integrated spectrometers, inspire a broader use of THz sources and motivate many important potential THz applications in different fields.