Laura Scognamiglio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Laura Scognamiglio has a total of 116 co-authors. Here are the top co-authors by number of shared publications:
- Elisa Tinti
Department of Earth Sciences Sapienza University of Rome Rome Italy
14 shared publications - Alberto Michelini
Istituto Nazionale di Geofisica e Vulcanologia Rome Italy
6 shared publications - Emanuele Casarotti
Istituto Nazionale di Geofisica e Vulcanologia, Roma, Italy
6 shared publications - Federica Magnoni
Istituto Nazionale di Geofisica e Vulcanologia Rome Italy
6 shared publications - Massimo Cocco
Istituto Nazionale di Geofisica e Vulcanologia Rome Italy
5 shared publications - Mimmo Palano
Istituto Nazionale di Geofisica e Vulcanologia Catania Italy
5 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Source Characterization via Deep Learning: Integrating Polarity Prediction and Focal Mechanism Estimation
In modern seismology, the rapid and accurate characterization of seismic sources following an earthquake is a fundamental task. Most observatories currently compute moment tensor solutions for events exceeding specific magnitude thresholds to ensure reliability. For instance, the National Institute of Geophysics and Volcanology (INGV) provides routine solutions for moderate to large events (Mw≥3.5) using established methods (Scognamiglio et al., 2009). However, characterizing smaller events remains challenging due to low signal-to-noise ratios and the need of modeling high-frequency waveforms that requires detailed knowledge of the velocity model, which is rarely available.Machine learning (ML) techniques have emerged as powerful tools to address these limitations, particularly in improving the prediction of first-arrival seismic wave polarities. These ML-derived polarities can be effectively integrated into traditional frameworks to compute robust focal mechanisms. In this study, we implement a workflow that bridges deep learning polarity predictions with standard focal mechanism estimation techniques, focusing on the tectonic setting of the Italian Peninsula.Our methodology consists of two primary stages. First, we trained a Convolutional Neural Network (CNN) for polarity prediction using the INSTANCE catalog (Michelini et al., 2021), which provides the high-quality, manually reviewed data essential for supervised learning. Second, we validated the model’s performance by analyzing approximately 4,700 earthquakes that occurred in Italy between January 1 2021, and January 1 2025, with magnitudes below 4.5.To benchmark our results, we selected a subset of earthquakes with existing Time Domain Moment Tensor (TDMT) solutions (Scognamiglio et al., 2006). Using the polarities predicted by the CNN, we computed focal mechanisms using the SKHASH code (Skoumal et al., 2024). The accuracy of these solutions was then evaluated against the TDMT catalog using Kagan angle analysis (Kagan, 1991) to quantify the rotation between double-couple sources.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessSource Characterization via Deep Learning: Integrating Polarity Prediction and Focal Mechanism Estimation
In modern seismology, the rapid and accurate characterization of seismic sources following an earthquake is a fundamental task. Most observatories currently compute moment tensor solutions for events exceeding specific magnitude thresholds to ensure reliability. For instance, the National Institute of Geophysics and Volcanology (INGV) provides routine solutions for moderate to large events (Mw≥3.5) using established methods (Scognamiglio et al., 2009). However, characterizing smaller events remains challenging due to low signal-to-noise ratios and the need of modeling high-frequency waveforms that requires detailed knowledge of the velocity model, which is rarely available.Machine learning (ML) techniques have emerged as powerful tools to address these limitations, particularly in improving the prediction of first-arrival seismic wave polarities. These ML-derived polarities can be effectively integrated into traditional frameworks to compute robust focal mechanisms. In this study, we implement a workflow that bridges deep learning polarity predictions with standard focal mechanism estimation techniques, focusing on the tectonic setting of the Italian Peninsula.Our methodology consists of two primary stages. First, we trained a Convolutional Neural Network (CNN) for polarity prediction using the INSTANCE catalog (Michelini et al., 2021), which provides the high-quality, manually reviewed data essential for supervised learning. Second, we validated the model’s performance by analyzing approximately 4,700 earthquakes that occurred in Italy between January 1 2021, and January 1 2025, with magnitudes below 4.5.To benchmark our results, we selected a subset of earthquakes with existing Time Domain Moment Tensor (TDMT) solutions (Scognamiglio et al., 2006). Using the polarities predicted by the CNN, we computed focal mechanisms using the SKHASH code (Skoumal et al., 2024). The accuracy of these solutions was then evaluated against the TDMT catalog using Kagan angle analysis (Kagan, 1991) to quantify the rotation between double-couple sources.
- Open Access
- 29 April 2025
- Published by American Geophysical Union (AGU) in Earth and Space Science
- Vol. 12 (5)
The Role of Salt Tectonics in the 2021 Central Adriatic Seismic Sequence
On 27 March 2021 a 3‐months lasting seismic sequence struck the Central Adriatic Basin that is part of the Adria plate, a relatively undeformed plate since recent times. Analyzing the waveform data acquired by the Italian and Croatian seismic networks, we computed the location parameters of 160 earthquakes and the focal mechanisms of the Mw 5.2 mainshock and the larger aftershocks. Most events align along a WNW‐ESE trending, 30 km long, narrow belt. The depth distribution of events indicates that the mainshock and a few aftershocks occurred within the upper 4 km, while most aftershocks were located below 5 km within the carbonate platform. We propose that the evolution of the 2021 earthquake distribution is primarily ruled by the top ductile salt layer. Moreover, the presence of a salt layer explains the relatively high VP/VS ratio of 1.83 in the sediment rocks surrounding the salt bodies, as also observed in similar tectonic settings. We suggest that the seismogenic fault likely responsible for the 2021 events is an inherited SW‐dipping normal fault, reactivated by reverse kinematics in response to the regional compressive stress. These results, and the understanding that salt deposits play a key role in focusing deformation and seismogenesis, represent a novel contribution to the long‐standing challenge of seismic hazard assessment of the Central Adriatic Basin, where moderate to large events could have devastating impacts along the densely populated coasts.
- 29 April 2025
- Published by American Geophysical Union (AGU) in Earth and Space Science
- Vol. 12 (5)
Open AccessThe Role of Salt Tectonics in the 2021 Central Adriatic Seismic Sequence
On 27 March 2021 a 3‐months lasting seismic sequence struck the Central Adriatic Basin that is part of the Adria plate, a relatively undeformed plate since recent times. Analyzing the waveform data acquired by the Italian and Croatian seismic networks, we computed the location parameters of 160 earthquakes and the focal mechanisms of the Mw 5.2 mainshock and the larger aftershocks. Most events align along a WNW‐ESE trending, 30 km long, narrow belt. The depth distribution of events indicates that the mainshock and a few aftershocks occurred within the upper 4 km, while most aftershocks were located below 5 km within the carbonate platform. We propose that the evolution of the 2021 earthquake distribution is primarily ruled by the top ductile salt layer. Moreover, the presence of a salt layer explains the relatively high VP/VS ratio of 1.83 in the sediment rocks surrounding the salt bodies, as also observed in similar tectonic settings. We suggest that the seismogenic fault likely responsible for the 2021 events is an inherited SW‐dipping normal fault, reactivated by reverse kinematics in response to the regional compressive stress. These results, and the understanding that salt deposits play a key role in focusing deformation and seismogenesis, represent a novel contribution to the long‐standing challenge of seismic hazard assessment of the Central Adriatic Basin, where moderate to large events could have devastating impacts along the densely populated coasts.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
The ongoing seismological research for the Central-Southern Aeolian Islands (CAVEAT project), Italy, from dense terrestrial seismic arrays
One of the tasks of the multidisciplinary project CAVEAT “Central-southern Aeolian islands: Volcanism and tEAring in the Tyrrhenian subduction system” was to deploy a dense seismic network composed by 120 wirelesss nodes, which were deployed for approximately 2 months on three islands of the Aeolian volcanic archipielago.The main goals of this data acquisition are to:detect and locate the shallow weak seismicity related to both volcanic and tectonic activity, perform regional and local tomographic studies based on both passive methods and ambient noise cross-correlations (previously done for Lipari, Calò et al., 2023) to constrain the crust structure characterize the source mechanisms. In this work we show the details of the data acquisition strategy and the preliminary analyses of the continuous ambient noise records, to reconstruct the shallow structure of the Aeolian Arc. This study is part of the INGV Pianeta Dinamico project 2023-2025 CAVEAT “Central-southern Aeolian islands: Volcanism and tEAring in the Tyrrhenian subduction system” (grant no. CUP D53J19000170001) supported by the Italian Ministry of University and Research “Fondo finalizzato al rilancio degli investimenti delle amministrazioni centrali dello Stato e allo sviluppo del Paese, legge 145/2018.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessThe ongoing seismological research for the Central-Southern Aeolian Islands (CAVEAT project), Italy, from dense terrestrial seismic arrays
One of the tasks of the multidisciplinary project CAVEAT “Central-southern Aeolian islands: Volcanism and tEAring in the Tyrrhenian subduction system” was to deploy a dense seismic network composed by 120 wirelesss nodes, which were deployed for approximately 2 months on three islands of the Aeolian volcanic archipielago.The main goals of this data acquisition are to:detect and locate the shallow weak seismicity related to both volcanic and tectonic activity, perform regional and local tomographic studies based on both passive methods and ambient noise cross-correlations (previously done for Lipari, Calò et al., 2023) to constrain the crust structure characterize the source mechanisms. In this work we show the details of the data acquisition strategy and the preliminary analyses of the continuous ambient noise records, to reconstruct the shallow structure of the Aeolian Arc. This study is part of the INGV Pianeta Dinamico project 2023-2025 CAVEAT “Central-southern Aeolian islands: Volcanism and tEAring in the Tyrrhenian subduction system” (grant no. CUP D53J19000170001) supported by the Italian Ministry of University and Research “Fondo finalizzato al rilancio degli investimenti delle amministrazioni centrali dello Stato e allo sviluppo del Paese, legge 145/2018.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
The role of salt tectonics in the occurrence of the 2021 Central Adriatic seismic sequence
On 27 March 2021 a three-months lasting seismic sequence struck the Central Adriatic Basin, part of Adria that is considered a relatively undeformed plate since recent times. Analyzing the waveform data acquired by the Italian and Croatian seismic networks, we computed the location parameters of 160 earthquakes and the focal mechanisms of the Mw5.2 mainshock and larger aftershocks. Most events align along a WNW-ESE, 30 km long, narrow belt. They form two clusters between 0-3 km and 4-14 km of depth, separated by a 1-2 km thick aseismic zone. Based on literature data, we suggest that such a seismic gap corresponds to a ductile salt layer, which constitutes the primary control factor for the evolution of the 2021 earthquake distribution. Moreover, the presence of a salt layer explains well the relatively high Vp/Vs ratio of 1.83 in the sediment rocks surrounding the salt bodies, as also observed in similar tectonic settings. We suggest that the seismogenic fault likely responsible for the 2021 events is an inherited SW-dipping normal fault, reactivated with prevalent reverse kinematics in response to the regional compressive stress. These results, and the recognition of a specific role of salt deposits in focusing deformation and seismogenesis represent a novel contribution to the long-standing problem of seismic hazard assessment of the Central Adriatic Basin, where moderate to large events could have devastating impacts along the highly populated coasts.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessThe role of salt tectonics in the occurrence of the 2021 Central Adriatic seismic sequence
On 27 March 2021 a three-months lasting seismic sequence struck the Central Adriatic Basin, part of Adria that is considered a relatively undeformed plate since recent times. Analyzing the waveform data acquired by the Italian and Croatian seismic networks, we computed the location parameters of 160 earthquakes and the focal mechanisms of the Mw5.2 mainshock and larger aftershocks. Most events align along a WNW-ESE, 30 km long, narrow belt. They form two clusters between 0-3 km and 4-14 km of depth, separated by a 1-2 km thick aseismic zone. Based on literature data, we suggest that such a seismic gap corresponds to a ductile salt layer, which constitutes the primary control factor for the evolution of the 2021 earthquake distribution. Moreover, the presence of a salt layer explains well the relatively high Vp/Vs ratio of 1.83 in the sediment rocks surrounding the salt bodies, as also observed in similar tectonic settings. We suggest that the seismogenic fault likely responsible for the 2021 events is an inherited SW-dipping normal fault, reactivated with prevalent reverse kinematics in response to the regional compressive stress. These results, and the recognition of a specific role of salt deposits in focusing deformation and seismogenesis represent a novel contribution to the long-standing problem of seismic hazard assessment of the Central Adriatic Basin, where moderate to large events could have devastating impacts along the highly populated coasts.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
The active frontal sector of the offshore Northern Apennine thrust belt: insights from an interdisciplinary approach following the 2022 Mw 5.5 Costa Marchigiana Pesarese earthquake (Italy)
Identifying seismogenic faults in offshore regions presents significant challenges, particularly in achieving their precise geometry and kinematics. Geological data derived from deep-sea exploration and geophysical surveys are commonly used to characterize offshore active faults together with earthquake hypocentral locations. However, limitations may arise in the quantity and quality of geophysical available data, inhibiting the realization of accurate 3D models. Furthermore, the precise relocation of seismic events is demanding, especially in the depth domain, due to the limited azimuthal coverage and the minimum station-event distance that is well beyond the mean depth of the events. In this context, an interdisciplinary approach becomes imperative to mitigate over-interpretation and over-simplification in defining the seismogenic sources and establishing an all-encompassing rupture model.By means of an interdisciplinary (geological, seismological, and geodetic) approach, we investigate the outermost Northern Apennines fold-and-thrust belt front in the Adriatic Sea (Italy) involved in the Costa Marchigiana Pesarese seismic sequence started with the 9 November 2022 Mw 5.5 mainshock. Given the proximity of the mainshock and the subsequent seismic sequence to the urbanized coastline, where several cities are situated, characterizing the activated faults and the related estimation of ground displacement becomes crucial for seismic risk assessment and the tsunamigenic potential.We analysed the geological setting of the area by means of an accurate interpretation of numerous seismic reflection profiles and well data acquired over the past decades, which complemented the publicly available seismic data. The interpretation of this dataset, provided by oil companies, led to an accurate definition of the thrust systems highlighting both the geometry of the activated sector of the thrust front and its relation to potentially active adjacent faults. Moreover, the results show the strong influence of past paleogeography and paleomorphology on the evolution and geometry of this sector of the fold-and-thrust belt, including the buttressing effect of carbonate platforms and inherited highs.The resulting 3D model was integrated with seismological data and geodetic observations allowing us to well highlight the activated portion of the fault plane: strong motion data and continuous GNSS stations hosted by onshore (storage centers) and offshore (seabed-anchored hydrocarbon platforms) infrastructures were jointly inverted to retrieve the Mw 5.5 coseismic rupture history.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessThe active frontal sector of the offshore Northern Apennine thrust belt: insights from an interdisciplinary approach following the 2022 Mw 5.5 Costa Marchigiana Pesarese earthquake (Italy)
Identifying seismogenic faults in offshore regions presents significant challenges, particularly in achieving their precise geometry and kinematics. Geological data derived from deep-sea exploration and geophysical surveys are commonly used to characterize offshore active faults together with earthquake hypocentral locations. However, limitations may arise in the quantity and quality of geophysical available data, inhibiting the realization of accurate 3D models. Furthermore, the precise relocation of seismic events is demanding, especially in the depth domain, due to the limited azimuthal coverage and the minimum station-event distance that is well beyond the mean depth of the events. In this context, an interdisciplinary approach becomes imperative to mitigate over-interpretation and over-simplification in defining the seismogenic sources and establishing an all-encompassing rupture model.By means of an interdisciplinary (geological, seismological, and geodetic) approach, we investigate the outermost Northern Apennines fold-and-thrust belt front in the Adriatic Sea (Italy) involved in the Costa Marchigiana Pesarese seismic sequence started with the 9 November 2022 Mw 5.5 mainshock. Given the proximity of the mainshock and the subsequent seismic sequence to the urbanized coastline, where several cities are situated, characterizing the activated faults and the related estimation of ground displacement becomes crucial for seismic risk assessment and the tsunamigenic potential.We analysed the geological setting of the area by means of an accurate interpretation of numerous seismic reflection profiles and well data acquired over the past decades, which complemented the publicly available seismic data. The interpretation of this dataset, provided by oil companies, led to an accurate definition of the thrust systems highlighting both the geometry of the activated sector of the thrust front and its relation to potentially active adjacent faults. Moreover, the results show the strong influence of past paleogeography and paleomorphology on the evolution and geometry of this sector of the fold-and-thrust belt, including the buttressing effect of carbonate platforms and inherited highs.The resulting 3D model was integrated with seismological data and geodetic observations allowing us to well highlight the activated portion of the fault plane: strong motion data and continuous GNSS stations hosted by onshore (storage centers) and offshore (seabed-anchored hydrocarbon platforms) infrastructures were jointly inverted to retrieve the Mw 5.5 coseismic rupture history.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Toward a Polarity Focal Mechanism Estimation via Deep Learning for small to moderate Italian earthquakes
One of the main tasks in seismology is the source characterization after an earthquake, in particular the estimate of the orientation of the fault on which an earthquake occurs and the direction of the slip. Currently, most seismological observatories compute moment tensor solutions for earthquakes above a certain magnitude threshold, but, for small to moderate earthquakes (i.e. aftershock sequences), or for large but close in time events, focal mechanism by first arrival polarities are often the only source information available (Sarao et al., 2021).Focal mechanisms are important to better define the activated faults, to help in understanding the seismotectonic process, to improve the predicted ground shakings for early warning, the tsunami alert and the seismic hazard assessment. For these purposes, it becomes essential to produce and disseminate an estimate of the earthquake source parameters even for small events. Recently, machine learning techniques have gained significant attention and usage in various fields, including seismology where these algorithms have emerged as powerful tools in providing new insight into the earthquakes data analysis such as the prediction of the seismic wave's first arrivals polarities which can be used to compute focal mechanisms.We present here a workflow developed to obtain earthquake focal mechanisms starting from the first p-wave polarities estimated through the method proposed by Ross et al (2018).Our procedure consists of two stages: in the first stage, we use a combination of the available INGV web services (Bono et al., 2021) and the ObsPy functions to download the earthquake hypocentral location. We recover the waveforms recorded by the stations in the 0 -120 km distance range, and we create an input file with the appropriate information required for the prediction of the polarities for each waveform. We then use the convolutional neural network (CNN) proposed in Ross et al (2018) to obtain the polarities for each waveform, which can be UP, DOWN, or UNKNOWN. The second stage of the developed procedure aims to use the polarities that have been predicted to determine the focal mechanisms of the selected earthquakes. To do this, we use a modern Python implementation of HASH code (originally proposed in Fortran by Hardebeck et al. 2002, 2003) called SKASH (Skoumal et al. submitted). Finally, we present an application of this procedure to the September 2023, Marradi (Central Italy), seismic sequence that has been characterized by a magnitude Mw 4.9 mainshock followed by over 70 aftershocks in the magnitude range 2 - 3.4. Here, we focused on the estimation of the focal mechanism for events down to M 2.0. The application of the presented workflow permits to gain useful information about the kinematics of the earthquakes in the sequence, obtaining thus a more precise characterization of the activated structures.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessToward a Polarity Focal Mechanism Estimation via Deep Learning for small to moderate Italian earthquakes
One of the main tasks in seismology is the source characterization after an earthquake, in particular the estimate of the orientation of the fault on which an earthquake occurs and the direction of the slip. Currently, most seismological observatories compute moment tensor solutions for earthquakes above a certain magnitude threshold, but, for small to moderate earthquakes (i.e. aftershock sequences), or for large but close in time events, focal mechanism by first arrival polarities are often the only source information available (Sarao et al., 2021).Focal mechanisms are important to better define the activated faults, to help in understanding the seismotectonic process, to improve the predicted ground shakings for early warning, the tsunami alert and the seismic hazard assessment. For these purposes, it becomes essential to produce and disseminate an estimate of the earthquake source parameters even for small events. Recently, machine learning techniques have gained significant attention and usage in various fields, including seismology where these algorithms have emerged as powerful tools in providing new insight into the earthquakes data analysis such as the prediction of the seismic wave's first arrivals polarities which can be used to compute focal mechanisms.We present here a workflow developed to obtain earthquake focal mechanisms starting from the first p-wave polarities estimated through the method proposed by Ross et al (2018).Our procedure consists of two stages: in the first stage, we use a combination of the available INGV web services (Bono et al., 2021) and the ObsPy functions to download the earthquake hypocentral location. We recover the waveforms recorded by the stations in the 0 -120 km distance range, and we create an input file with the appropriate information required for the prediction of the polarities for each waveform. We then use the convolutional neural network (CNN) proposed in Ross et al (2018) to obtain the polarities for each waveform, which can be UP, DOWN, or UNKNOWN. The second stage of the developed procedure aims to use the polarities that have been predicted to determine the focal mechanisms of the selected earthquakes. To do this, we use a modern Python implementation of HASH code (originally proposed in Fortran by Hardebeck et al. 2002, 2003) called SKASH (Skoumal et al. submitted). Finally, we present an application of this procedure to the September 2023, Marradi (Central Italy), seismic sequence that has been characterized by a magnitude Mw 4.9 mainshock followed by over 70 aftershocks in the magnitude range 2 - 3.4. Here, we focused on the estimation of the focal mechanism for events down to M 2.0. The application of the presented workflow permits to gain useful information about the kinematics of the earthquakes in the sequence, obtaining thus a more precise characterization of the activated structures.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Volcanism and tearing in the Tyrrhenian subduction system: the CAVEAT project
In retreating subduction zones the proposed lithosphere tearing processes at slab edges are typically related to segmentation of subducting plate. A direct response to lithosphere tearing is the channeling of new asthenospheric mantle that can initiate magmatism. Tearing mechanisms have also been proposed for the Calabrian Arc, where slab migration led to the formation of the southeastern Tyrrhenian basin and was progressively accommodated by inherited and newly formed vertical tear faults whose oldest (~2 Ma) and youngest (~0.8 Ma) tectonic expressions in the upper plate are the Sisifo-Alicudi and the Aeolian-Tindari-Letojanni fault systems, respectively. The Western and Central-Southern Aeolian Islands nested along these structures as highlighted by a large number of geological and geophysical studies in the last decades. CAVEAT aims to apply a multidisciplinary approach to study in detail the local lithospheric structure, the pattern of crustal deformation and the geochemical signature of the Central-Southern Aeolian Islands. The acquisition of new data will provide a broad overview of the ongoing geodynamics of the southern Tyrrhenian region and will allow us to properly study the interplay of present-day tectonics and volcanic deformation and the related role and nature of the fluids and the hydrothermal activity.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessVolcanism and tearing in the Tyrrhenian subduction system: the CAVEAT project
In retreating subduction zones the proposed lithosphere tearing processes at slab edges are typically related to segmentation of subducting plate. A direct response to lithosphere tearing is the channeling of new asthenospheric mantle that can initiate magmatism. Tearing mechanisms have also been proposed for the Calabrian Arc, where slab migration led to the formation of the southeastern Tyrrhenian basin and was progressively accommodated by inherited and newly formed vertical tear faults whose oldest (~2 Ma) and youngest (~0.8 Ma) tectonic expressions in the upper plate are the Sisifo-Alicudi and the Aeolian-Tindari-Letojanni fault systems, respectively. The Western and Central-Southern Aeolian Islands nested along these structures as highlighted by a large number of geological and geophysical studies in the last decades. CAVEAT aims to apply a multidisciplinary approach to study in detail the local lithospheric structure, the pattern of crustal deformation and the geochemical signature of the Central-Southern Aeolian Islands. The acquisition of new data will provide a broad overview of the ongoing geodynamics of the southern Tyrrhenian region and will allow us to properly study the interplay of present-day tectonics and volcanic deformation and the related role and nature of the fluids and the hydrothermal activity.
- Open Access
- 9 April 2022
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 127 (4)
Centroid Moment Tensor Catalog With 3D Lithospheric Wave Speed Model: The 2016–2017 Central Apennines Sequence
Moment tensor inversions of broadband velocity data are usually managed by adopting Green's functions for 1D layered seismic wave speed models. This assumption can impact on source parameter estimates in regions with complex 3D heterogeneous structures and discontinuities in rock properties. In this work, we present a new centroid moment tensor (CMT) catalog for the Amatrice‐Visso‐Norcia (AVN) seismic sequence based on a recently generated 3D wave speed model for the Italian lithosphere. Forward synthetic seismograms and Fréchet derivatives for CMT‐3D inversions of 159 earthquakes with Mw ≥ 3.0 are simulated using a spectral‐element method (SEM) code. By comparing the retrieved solutions with those from time domain moment tensor (TDMT) catalog, obtained with a 1D wave speed model calibrated for Central Apennines (Italy), we observe a remarkable degree of consistency in terms of source geometry, kinematics, and magnitude. Significant differences are found in centroid depths, which are more accurately estimated using the 3D model. Finally, we present a newly designed parameter, τ, to better quantify and compare a‐posteriori the reliability of the obtained MT solutions. τ measures the goodness of fit between observed and synthetic seismograms accounting for differences in amplitude, arrival time, percentage of fitted seconds, and the usual L2‐norm estimate. The CMT‐3D solutions represent the first Italian CMT catalog based on a full‐waveform 3D wave speed model. They provide reliable source parameters with potential implications for the structures activated during the sequence. The developed approach can be readily applied to more complex Italian regions where 1D models are underperforming and not representative of the area.
- 9 April 2022
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 127 (4)
Open AccessCentroid Moment Tensor Catalog With 3D Lithospheric Wave Speed Model: The 2016–2017 Central Apennines Sequence
Moment tensor inversions of broadband velocity data are usually managed by adopting Green's functions for 1D layered seismic wave speed models. This assumption can impact on source parameter estimates in regions with complex 3D heterogeneous structures and discontinuities in rock properties. In this work, we present a new centroid moment tensor (CMT) catalog for the Amatrice‐Visso‐Norcia (AVN) seismic sequence based on a recently generated 3D wave speed model for the Italian lithosphere. Forward synthetic seismograms and Fréchet derivatives for CMT‐3D inversions of 159 earthquakes with Mw ≥ 3.0 are simulated using a spectral‐element method (SEM) code. By comparing the retrieved solutions with those from time domain moment tensor (TDMT) catalog, obtained with a 1D wave speed model calibrated for Central Apennines (Italy), we observe a remarkable degree of consistency in terms of source geometry, kinematics, and magnitude. Significant differences are found in centroid depths, which are more accurately estimated using the 3D model. Finally, we present a newly designed parameter, τ, to better quantify and compare a‐posteriori the reliability of the obtained MT solutions. τ measures the goodness of fit between observed and synthetic seismograms accounting for differences in amplitude, arrival time, percentage of fitted seconds, and the usual L2‐norm estimate. The CMT‐3D solutions represent the first Italian CMT catalog based on a full‐waveform 3D wave speed model. They provide reliable source parameters with potential implications for the structures activated during the sequence. The developed approach can be readily applied to more complex Italian regions where 1D models are underperforming and not representative of the area.
- Open Access
- 31 August 2021
- Published by Wiley in ESS Open Archive
Centroid Moment Tensor catalog with 3D lithospheric wavespeed model: the 2016-2017 Central Apennines sequence
Moment tensor inversions of broadband velocity data are usually managed by adopting Green’s functions for 1D layered seismic wavespeed models. This assumption can impact on source parameter estimates in regions with complex 3D heterogeneous structures and rock properties discontinuities. In this work, we present a new Centroid Moment Tensor (CMT) Catalog for the Amatrice–Visso–Norcia (AVN) seismic sequence based on a recently generated 3D wavespeed model for the Italian lithosphere. Forward synthetic seismograms and Fréchet derivatives for CMT–3D inversions of 159 earthquakes with Mw ≥ 3.0 are simulated using a spectral–element method (SEM) code. By comparing the retrieved solutions with those from Time Domain Moment Tensor (TDMT) catalog, obtained with a 1D wavespeed model calibrated for Central Apennines (Italy), we observe a remarkable degree of consistency in terms of source geometry, kinematics, and magnitude. Significant differences are found in centroid depths, which are more accurately estimated using the 3D model. Finally, we present a newly designed parameter, τ, to better quantify and compare a–posteriori the reliability of the obtained MT solutions. This parameter measures the goodness of fit between observed and synthetic seismograms accounting for differences in amplitude and arrival time, percentage of fitted seconds, together with the usual L2–norm estimate. These CMT–3D solutions represent the first Italian CMT catalog based on a full–waveform 3D wavespeed model and provide robust source parameters with potential implications for the structures activated during the sequence. The developed approach can be readily applied to more complex Italian regions where a 1D wavespeed model is underperforming.
- 31 August 2021
- Published by Wiley in ESS Open Archive
Open AccessCentroid Moment Tensor catalog with 3D lithospheric wavespeed model: the 2016-2017 Central Apennines sequence
Moment tensor inversions of broadband velocity data are usually managed by adopting Green’s functions for 1D layered seismic wavespeed models. This assumption can impact on source parameter estimates in regions with complex 3D heterogeneous structures and rock properties discontinuities. In this work, we present a new Centroid Moment Tensor (CMT) Catalog for the Amatrice–Visso–Norcia (AVN) seismic sequence based on a recently generated 3D wavespeed model for the Italian lithosphere. Forward synthetic seismograms and Fréchet derivatives for CMT–3D inversions of 159 earthquakes with Mw ≥ 3.0 are simulated using a spectral–element method (SEM) code. By comparing the retrieved solutions with those from Time Domain Moment Tensor (TDMT) catalog, obtained with a 1D wavespeed model calibrated for Central Apennines (Italy), we observe a remarkable degree of consistency in terms of source geometry, kinematics, and magnitude. Significant differences are found in centroid depths, which are more accurately estimated using the 3D model. Finally, we present a newly designed parameter, τ, to better quantify and compare a–posteriori the reliability of the obtained MT solutions. This parameter measures the goodness of fit between observed and synthetic seismograms accounting for differences in amplitude and arrival time, percentage of fitted seconds, together with the usual L2–norm estimate. These CMT–3D solutions represent the first Italian CMT catalog based on a full–waveform 3D wavespeed model and provide robust source parameters with potential implications for the structures activated during the sequence. The developed approach can be readily applied to more complex Italian regions where a 1D wavespeed model is underperforming.
- Open Access
- 24 June 2019
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 219 (1) , 346-372
Variability in synthetic earthquake ground motions caused by source variability and errors in wave propagation models
SUMMARY: Numerical simulations of earthquake ground motions are used both to anticipate the effects of hypothetical earthquakes by forward simulation and to infer the behaviour of the real earthquake source ruptures by the inversion of recorded ground motions. In either application it is necessary to assume some Earth structure that is necessarily inaccurate and to use a computational method that is also inaccurate for simulating the wavefield Green's functions. We refer to these two sources of error as ‘propagation inaccuracies’, which might be considered to be epistemic. We show that the variance of the Fourier spectrum of the synthetic earthquake seismograms caused by propagation inaccuracies is related to the spatial covariance on the rupture surface of errors in the computed Green's functions, which we estimate for the case of the 2009 L'Aquila, Italy, earthquake by comparing erroneous computed Green's functions with observed L'Aquila aftershock seismograms (empirical Green's functions). We further show that the variance of the synthetic seismograms caused by the rupture variability (aleatory uncertainty) is related to the spatial covariance on the rupture surface of aleatory variations in the rupture model, and we investigate the effect of correlated variations in Green's function errors and variations in rupture models. Thus, we completely characterize the variability of synthetic earthquake seismograms induced by errors in propagation and variability in the rupture behaviour. We calculate the spectra of the variance of the ground motions of the L'Aquila main shock caused by propagation inaccuracies for two specific broad-band stations, the AQU and the FIAM stations. These variances are distressingly large, being comparable or in some cases exceeding the data amplitudes, suggesting that the best-fitting L'Aquila rupture model significantly overfits the data and might be seriously in error. If these computed variances are typical, the accuracy of many other rupture models for past earthquakes may need to be reconsidered. The results of this work might be useful in seismic hazard estimation because the variability of the computed ground motion, caused both by propagation inaccuracies and variations in the rupture model, can be computed directly, not requiring laborious consideration of multiple Earth structures.
- 24 June 2019
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 219 (1) , 346-372
Open AccessVariability in synthetic earthquake ground motions caused by source variability and errors in wave propagation models
SUMMARY: Numerical simulations of earthquake ground motions are used both to anticipate the effects of hypothetical earthquakes by forward simulation and to infer the behaviour of the real earthquake source ruptures by the inversion of recorded ground motions. In either application it is necessary to assume some Earth structure that is necessarily inaccurate and to use a computational method that is also inaccurate for simulating the wavefield Green's functions. We refer to these two sources of error as ‘propagation inaccuracies’, which might be considered to be epistemic. We show that the variance of the Fourier spectrum of the synthetic earthquake seismograms caused by propagation inaccuracies is related to the spatial covariance on the rupture surface of errors in the computed Green's functions, which we estimate for the case of the 2009 L'Aquila, Italy, earthquake by comparing erroneous computed Green's functions with observed L'Aquila aftershock seismograms (empirical Green's functions). We further show that the variance of the synthetic seismograms caused by the rupture variability (aleatory uncertainty) is related to the spatial covariance on the rupture surface of aleatory variations in the rupture model, and we investigate the effect of correlated variations in Green's function errors and variations in rupture models. Thus, we completely characterize the variability of synthetic earthquake seismograms induced by errors in propagation and variability in the rupture behaviour. We calculate the spectra of the variance of the ground motions of the L'Aquila main shock caused by propagation inaccuracies for two specific broad-band stations, the AQU and the FIAM stations. These variances are distressingly large, being comparable or in some cases exceeding the data amplitudes, suggesting that the best-fitting L'Aquila rupture model significantly overfits the data and might be seriously in error. If these computed variances are typical, the accuracy of many other rupture models for past earthquakes may need to be reconsidered. The results of this work might be useful in seismic hazard estimation because the variability of the computed ground motion, caused both by propagation inaccuracies and variations in the rupture model, can be computed directly, not requiring laborious consideration of multiple Earth structures.