Jafar Khademi Hamidi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jafar Khademi Hamidi has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Ebrahim Sharifi Teshnizi
Department of Geology, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran
3 shared publications - Mojtaba Heidari
Department of Geology, Faculty of Sciences, Bu-Ali Sina University, Hamedan, Iran
2 shared publications - Seyed Sajjad Karrari
Department of Geology, Faculty of Sciences, Bu-Ali Sina University, Hamedan, Iran
2 shared publications - A. Esmaeili
Mining Engineering Department, Faculty of Engineering, Tarbiat Modares University Jalal Ale Ahmad Highway
1 shared publication A. Hosseini
Research & Training Department, Tabas Parvadeh Coal Company (TPCCO), Tabas, Iran
1 shared publicationAbbas Eftekhari
Mining Engineering Department, Faculty of Engineering, Kashan University, Kashan, Iran
1 shared publication
Latest Publications
- Open Access
- 16 October 2026
- Published by Academy of Science of South Africa in Journal of the Southern African Institute of Mining and Metallurgy
- Vol. 126 (9) , 511-524
Underground mine stope boundary optimisation using a hybrid network flow-particle swarm algorithm
This study introduces a new hybrid algorithm designed to optimise stope boundaries in sublevel-stoping mines. Stopes were delineated based on the raises' locations and relevant constraints, including minimum and maximum stope dimensions, stope overlaps, and geotechnical considerations. Particle swarm optimisation was used to determine the optimal locations of raises, while a network-flow algorithm applied constraints and generated stopes surrounding each raise, defining their size and shape. The hybrid algorithm was implemented on a copper deposit in Chile at a depth of 1,000 meters below the surface. A comparative analysis against the network-flow and maximum-value neighborhood algorithms showed that the economic value of stopes produced by the hybrid algorithm exceeds that of the network-flow algorithm by about 4% and exceeds that of the maximum-value neighborhood algorithm by about 7.5%. Moreover, the proposed algorithm was able to produce stable stope layouts for large-scale problems within a reasonable solution time. These findings are promising, particularly given the growing prevalence of high-tonnage, low-grade deposits in the mining industry.
- 16 October 2026
- Published by Academy of Science of South Africa in Journal of the Southern African Institute of Mining and Metallurgy
- Vol. 126 (9) , 511-524
Open AccessUnderground mine stope boundary optimisation using a hybrid network flow-particle swarm algorithm
This study introduces a new hybrid algorithm designed to optimise stope boundaries in sublevel-stoping mines. Stopes were delineated based on the raises' locations and relevant constraints, including minimum and maximum stope dimensions, stope overlaps, and geotechnical considerations. Particle swarm optimisation was used to determine the optimal locations of raises, while a network-flow algorithm applied constraints and generated stopes surrounding each raise, defining their size and shape. The hybrid algorithm was implemented on a copper deposit in Chile at a depth of 1,000 meters below the surface. A comparative analysis against the network-flow and maximum-value neighborhood algorithms showed that the economic value of stopes produced by the hybrid algorithm exceeds that of the network-flow algorithm by about 4% and exceeds that of the maximum-value neighborhood algorithm by about 7.5%. Moreover, the proposed algorithm was able to produce stable stope layouts for large-scale problems within a reasonable solution time. These findings are promising, particularly given the growing prevalence of high-tonnage, low-grade deposits in the mining industry.
- 3 November 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 59 (4) , 5033-5063
Prediction of Rotary Drilling Rate of Penetration in Surface Mines Using Machine Learning Techniques
- 3 November 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 59 (4) , 5033-5063
Prediction of Rotary Drilling Rate of Penetration in Surface Mines Using Machine Learning Techniques
- 26 January 2025
- Published by Elsevier in ISA Transactions
- Vol. 159, 387-398
RAM measure of EPB shield tunneling system under uncertain parameters – A case study in Tehran metro line 6
- 26 January 2025
- Published by Elsevier in ISA Transactions
- Vol. 159, 387-398
RAM measure of EPB shield tunneling system under uncertain parameters – A case study in Tehran metro line 6
- Open Access
- 25 October 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (12) , 5963-5971
Effects of Blade Speed on Microstructure and Wear Behavior in the Abrasion Value Cutter Steel (AVS) Test
- 25 October 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (12) , 5963-5971
Open AccessEffects of Blade Speed on Microstructure and Wear Behavior in the Abrasion Value Cutter Steel (AVS) Test
- 16 August 2024
- Published by Geological Society of London in Quarterly Journal of Engineering Geology and Hydrogeology
- Vol. 57 (4)
The relationship between mechanical properties and mineralogical composition of some sedimentary rocks
The physical and mechanical properties of rock material are remarkably associated with the comprising mineralogical composition and textural characteristics. Therefore, a meticulous understanding of the role of mineralogical composition in the engineering behaviour of sedimentary rocks is essential. For this purpose, both the matrix and aggregates of rocks must be thoroughly analysed to obtain comprehensive insight into this aspect. The main objective of this study is to investigate the extent of the complexity of the relationship between mineralogical and mechanical properties of some sedimentary rocks. Several sedimentary rock samples from different regions of Iran were analysed in this study. The same samples were then tested to determine uniaxial compressive strength, tensile strength, Schmidt hammer hardness and the Cerchar abrasivity index. The relationship between these properties and the mineralogical composition is described by linear and multivariate regression analyses. The research unequivocally establishes a significant correlation between specific mechanical parameters and mineralogical composition. Moreover, the findings highlight the relative importance of each parameter, with some being more crucial than others.
- 16 August 2024
- Published by Geological Society of London in Quarterly Journal of Engineering Geology and Hydrogeology
- Vol. 57 (4)
The relationship between mechanical properties and mineralogical composition of some sedimentary rocks
The physical and mechanical properties of rock material are remarkably associated with the comprising mineralogical composition and textural characteristics. Therefore, a meticulous understanding of the role of mineralogical composition in the engineering behaviour of sedimentary rocks is essential. For this purpose, both the matrix and aggregates of rocks must be thoroughly analysed to obtain comprehensive insight into this aspect. The main objective of this study is to investigate the extent of the complexity of the relationship between mineralogical and mechanical properties of some sedimentary rocks. Several sedimentary rock samples from different regions of Iran were analysed in this study. The same samples were then tested to determine uniaxial compressive strength, tensile strength, Schmidt hammer hardness and the Cerchar abrasivity index. The relationship between these properties and the mineralogical composition is described by linear and multivariate regression analyses. The research unequivocally establishes a significant correlation between specific mechanical parameters and mineralogical composition. Moreover, the findings highlight the relative importance of each parameter, with some being more crucial than others.
- 20 July 2024
- Published by Elsevier in Transportation Geotechnics
- Vol. 48, 101318
Evaluation of rock cutting performance of conical cutting tool based on commonly measured rock properties
- 20 July 2024
- Published by Elsevier in Transportation Geotechnics
- Vol. 48, 101318
Evaluation of rock cutting performance of conical cutting tool based on commonly measured rock properties
- Open Access
- 1 July 2024
- Published by KEAI Publishing in Rock Mechanics Bulletin
- Vol. 3 (3)
Introducing a new rock abrasivity index using a scaled down disc cutter
Rock abrasivity influences wear of cutting tools and consequently, performance of mechanized tunneling machines. Several methods have been proposed to evaluate rock abrasivity in recent decades, each one has its own advantages. In this paper, a new method is introduced to estimate wear of disc cutters based on rock cutting tests using scaled down discs (i.e. 54 and 72 mm diameter). The discs are made of H13 steel, which is a common steel type in producing real-scale discs, with hardness of 32 and 54 HRC. The small-scale linear rock cutting machine and a new abrasion test apparatus, namely University of Tehran abrasivity test machine, are utilized to perform the tests. Tip width of the worn discs is monitored and presented as the function of the accumulated test run to classify the rock abrasion. Abrasivity tests show that by increasing the UCS of the rock samples, wear rate is doubled gradually that reveals the sensitivity of the test procedure to the main parameters affecting the abrasivity of hard rocks. For the rocks with the highest UCS, the normal wear stops after performing 5 to 10 rounds of the tests, and then, deformation of the disc tip is detectable. Two abrasivity indices are defined based on the abrasivity tests results and their correlations with CAI and UCS are established. Comparison of the established correlations in this study with previous investigations demonstrates the sensitivity of the indices to the parameters affecting wear of the disc cutters and repeatability of the outputs obtained from abrasivity tests using scaled down discs. Findings of this study can be used to enhance the accuracy of rock abrasivity classifications.
- 1 July 2024
- Published by KEAI Publishing in Rock Mechanics Bulletin
- Vol. 3 (3)
Open AccessIntroducing a new rock abrasivity index using a scaled down disc cutter
Rock abrasivity influences wear of cutting tools and consequently, performance of mechanized tunneling machines. Several methods have been proposed to evaluate rock abrasivity in recent decades, each one has its own advantages. In this paper, a new method is introduced to estimate wear of disc cutters based on rock cutting tests using scaled down discs (i.e. 54 and 72 mm diameter). The discs are made of H13 steel, which is a common steel type in producing real-scale discs, with hardness of 32 and 54 HRC. The small-scale linear rock cutting machine and a new abrasion test apparatus, namely University of Tehran abrasivity test machine, are utilized to perform the tests. Tip width of the worn discs is monitored and presented as the function of the accumulated test run to classify the rock abrasion. Abrasivity tests show that by increasing the UCS of the rock samples, wear rate is doubled gradually that reveals the sensitivity of the test procedure to the main parameters affecting the abrasivity of hard rocks. For the rocks with the highest UCS, the normal wear stops after performing 5 to 10 rounds of the tests, and then, deformation of the disc tip is detectable. Two abrasivity indices are defined based on the abrasivity tests results and their correlations with CAI and UCS are established. Comparison of the established correlations in this study with previous investigations demonstrates the sensitivity of the indices to the parameters affecting wear of the disc cutters and repeatability of the outputs obtained from abrasivity tests using scaled down discs. Findings of this study can be used to enhance the accuracy of rock abrasivity classifications.
- 1 March 2024
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 24 (3)
New Cerchar Device Used for Evaluating Cerchar Abrasivity Parameters
- 1 March 2024
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 24 (3)
New Cerchar Device Used for Evaluating Cerchar Abrasivity Parameters
- 17 March 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (6) , 4507-4533
An Experimental Study of Water Saturation Effect on Chipping Efficiency of a Chisel Pick in Cutting Some Low- and Medium-Strength Rocks
- 17 March 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (6) , 4507-4533
An Experimental Study of Water Saturation Effect on Chipping Efficiency of a Chisel Pick in Cutting Some Low- and Medium-Strength Rocks