Sergii Solopan
Research Subjects
Research Interests
Sergii Solopan has a total of 130 co-authors. Here are the top co-authors by number of shared publications:
- Anatolii Grigorievich Belous
V.I. Vernadsky Institute of General and Inorganic Chemistry of the National Academy of Sciences of Ukraine 2 , Palladina Ave., 32/34, Kyiv 03142
49 shared publications - Alexander I. Tovstolytkin
V. G. Baryakhtar Institute of Magnetism of the National Academy of Sciences of Ukraine 1 , Kyiv 03142
25 shared publications - Yuliia Shlapa
V. I. Vernadsky Institute of General & Inorganic Chemistry of the NAS of Ukraine, 32/34, Palladina ave., Kyiv, 03142, Ukraine
13 shared publications - Viktor M. Kalita
V. G. Baryakhtar Institute of Magnetism of the National Academy of Sciences of Ukraine 1 , Kyiv 03142
10 shared publications O.V. Yelenich
8 shared publicationsA. M. Pogorily
Institute of Magnetism, National Academy of Ukraine and Ministry of Education and Science of Ukraine , Blvd. Vernadskogo 36-b, Kiev 03680, Ukraine
6 shared publications
Latest Publications
- Open Access
- 25 July 2026
- Published by V.I. Vernadsky Institute of General and Inorganic Chemistry in Ukrainian Chemistry Journal
- Vol. 92 (6) , 3-20
SYNTHESIS AND ELECTROMAGNETIC PROPERTIES OF Ni–Zn FERRITES WITH SPINEL STRUCTURE
The behavior of microdispersed and ceramic samples of ferrites of the composition Ni0.5Zn0.5Fe2O4 was studied. The effect of temperature on the degree of crystallinity and the dimensions of the crystal lattice was shown. The formation of a spinel structure with the space group Fd-3m for Ni0.5Zn0.5Fe2O4 at 400 °C was shown. Studies have shown that the parameter a of the cubic spinel structure of Ni0.5Zn0.5Fe2O4, depending on the temperature of the precipitation treatment, passes through a minimum at 1000 °C. The IR spectra of the particles obtained after synthesis was investigated and showed two absorption bands in the range from 700 to 350 cm-1, which correspond to the total M-O vibrations in the tetrahedral and octahedral positions. The morphology of powders and ceramics of Ni0.5Zn0.5Fe2O4 was evaluated by electron microscopy from energy dispersive X-ray analysis. Microphotographs from energy dispersive X-ray analysis confirmed the chemical homogeneity and stoichiometry of the ceramic sample. The electromagnetic properties of synthesized ferrites at frequencies from 100 kHz to 18 GHz were studied. The studied spectra of complex magnetic permeability showed a resonance-like dispersion with an asymmetric peak, which indicates losses in the range of 1 MHz –1 GHz that occurs due to magnetic and electric losses, which are associated with the dynamic interaction of the electromagnetic wave with grain edges and domain walls of ferrite. In the frequency range of 7–12 GHz, the main contribution to electromagnetic absorption is provided by natural ferromagnetic resonance. The combination of high magnetic losses and improved matching of wave impedances makes composite materials based on ferrites promising for use as radio-absorbing materials.
- 25 July 2026
- Published by V.I. Vernadsky Institute of General and Inorganic Chemistry in Ukrainian Chemistry Journal
- Vol. 92 (6) , 3-20
Open AccessSYNTHESIS AND ELECTROMAGNETIC PROPERTIES OF Ni–Zn FERRITES WITH SPINEL STRUCTURE
The behavior of microdispersed and ceramic samples of ferrites of the composition Ni0.5Zn0.5Fe2O4 was studied. The effect of temperature on the degree of crystallinity and the dimensions of the crystal lattice was shown. The formation of a spinel structure with the space group Fd-3m for Ni0.5Zn0.5Fe2O4 at 400 °C was shown. Studies have shown that the parameter a of the cubic spinel structure of Ni0.5Zn0.5Fe2O4, depending on the temperature of the precipitation treatment, passes through a minimum at 1000 °C. The IR spectra of the particles obtained after synthesis was investigated and showed two absorption bands in the range from 700 to 350 cm-1, which correspond to the total M-O vibrations in the tetrahedral and octahedral positions. The morphology of powders and ceramics of Ni0.5Zn0.5Fe2O4 was evaluated by electron microscopy from energy dispersive X-ray analysis. Microphotographs from energy dispersive X-ray analysis confirmed the chemical homogeneity and stoichiometry of the ceramic sample. The electromagnetic properties of synthesized ferrites at frequencies from 100 kHz to 18 GHz were studied. The studied spectra of complex magnetic permeability showed a resonance-like dispersion with an asymmetric peak, which indicates losses in the range of 1 MHz –1 GHz that occurs due to magnetic and electric losses, which are associated with the dynamic interaction of the electromagnetic wave with grain edges and domain walls of ferrite. In the frequency range of 7–12 GHz, the main contribution to electromagnetic absorption is provided by natural ferromagnetic resonance. The combination of high magnetic losses and improved matching of wave impedances makes composite materials based on ferrites promising for use as radio-absorbing materials.
- 25 May 2026
- Published by V.I. Vernadsky Institute of General and Inorganic Chemistry in Ukrainian Chemistry Journal
- Vol. 92 (4)
ACADEMICIAN ANATOLY BILOUS – AN OUTSTANDING SPECIALIST IN SOLID STATE CHEMISTRY (to his 75th birthday)
Academician of the National Academy of Sciences of Ukraine Anatoly Grigorovich Bilous, Doctor of Chemical Sciences, Professor, a well-known specialist in the field of physical and inorganic chemistry, solid state chemistry, physics of semiconductors and dielectrics. Anatoly Bilous was born on May 8, 1951 in the village of Grushka, Khmelnytskyi region. Graduated from NTUU «Kyiv Polytechnic Institute», Faculty of Radio Electronics (1974), postgraduate studies at the L. Ya. Karpov Physicochemical Institute (1977, Moscow). Defended his candidate’s thesis, «Influence and study of some ferroelectric and antiferroelectric metal oxides and assessment of their prospects for use in microwave technology,» at the Institute of Steel and Alloys in 1978 (Moscow). And since the same year to the present time, he has been working at the V.I. Vernadsky Institute of General and Inorganic Chemistry NAS of Ukraine, and has been the head of the Department of Solid State Chemistry (since 1983). He defended his doctoral dissertation, «Synthesis, structure and properties of heterosubstituted oxides based on elements of groups III-V» in 1991. Scientific directions concern the study of the formation conditions, structure, and properties of complex oxide systems and the development of highly effective materials based on them. Together with the employees of the department, Bilous developed methods for controlling the properties of oxide systems similar in chemical composition - from dielectrics to cationic conductors and semiconductors, and established the regularities of the formation of macroparticles of oxide systems (aluminates, ferrites, zirconates, titanates) with a given particle shape. He obtained new functional materials: high-permeability and high-induction ferrites, new dielectrics for ultrasensitive equipment, superconducting materials, and ionic conductors by finding a correlation between the methods of production, structure, and properties of the material. A. Bilous is also engaged in scientific and pedagogical activities. He has prepared one Doctor of Chemical Sciences and about two dozen Candidates of Chemical Sciences and Doctors of Philosophy in the specialty «Chemistry». Scientific results have been published in the form of articles published in Ukraine and abroad, protected by copyright certificates of the USSR and patents of Ukraine. In 2018, A. Bilous and S. Kobylyanska published the monograph «Oxide Lithium-Conducting Solid Electrolytes». A.G. Bilous was awarded the title of Honored Worker of Science and Technology of Ukraine (2004); he is a laureate of the State Prize of Ukraine in the field of science and technology (2008) for the work «Intermetallics, hydrides and oxides as the basis of new energy-saving materials», the I. Pulyuy Prize of the National Academy of Sciences of Ukraine (2017). In 2019, he was awarded the Order of Prince Yaroslav the Wise, V degree.
- 25 May 2026
- Published by V.I. Vernadsky Institute of General and Inorganic Chemistry in Ukrainian Chemistry Journal
- Vol. 92 (4)
ACADEMICIAN ANATOLY BILOUS – AN OUTSTANDING SPECIALIST IN SOLID STATE CHEMISTRY (to his 75th birthday)
Academician of the National Academy of Sciences of Ukraine Anatoly Grigorovich Bilous, Doctor of Chemical Sciences, Professor, a well-known specialist in the field of physical and inorganic chemistry, solid state chemistry, physics of semiconductors and dielectrics. Anatoly Bilous was born on May 8, 1951 in the village of Grushka, Khmelnytskyi region. Graduated from NTUU «Kyiv Polytechnic Institute», Faculty of Radio Electronics (1974), postgraduate studies at the L. Ya. Karpov Physicochemical Institute (1977, Moscow). Defended his candidate’s thesis, «Influence and study of some ferroelectric and antiferroelectric metal oxides and assessment of their prospects for use in microwave technology,» at the Institute of Steel and Alloys in 1978 (Moscow). And since the same year to the present time, he has been working at the V.I. Vernadsky Institute of General and Inorganic Chemistry NAS of Ukraine, and has been the head of the Department of Solid State Chemistry (since 1983). He defended his doctoral dissertation, «Synthesis, structure and properties of heterosubstituted oxides based on elements of groups III-V» in 1991. Scientific directions concern the study of the formation conditions, structure, and properties of complex oxide systems and the development of highly effective materials based on them. Together with the employees of the department, Bilous developed methods for controlling the properties of oxide systems similar in chemical composition - from dielectrics to cationic conductors and semiconductors, and established the regularities of the formation of macroparticles of oxide systems (aluminates, ferrites, zirconates, titanates) with a given particle shape. He obtained new functional materials: high-permeability and high-induction ferrites, new dielectrics for ultrasensitive equipment, superconducting materials, and ionic conductors by finding a correlation between the methods of production, structure, and properties of the material. A. Bilous is also engaged in scientific and pedagogical activities. He has prepared one Doctor of Chemical Sciences and about two dozen Candidates of Chemical Sciences and Doctors of Philosophy in the specialty «Chemistry». Scientific results have been published in the form of articles published in Ukraine and abroad, protected by copyright certificates of the USSR and patents of Ukraine. In 2018, A. Bilous and S. Kobylyanska published the monograph «Oxide Lithium-Conducting Solid Electrolytes». A.G. Bilous was awarded the title of Honored Worker of Science and Technology of Ukraine (2004); he is a laureate of the State Prize of Ukraine in the field of science and technology (2008) for the work «Intermetallics, hydrides and oxides as the basis of new energy-saving materials», the I. Pulyuy Prize of the National Academy of Sciences of Ukraine (2017). In 2019, he was awarded the Order of Prince Yaroslav the Wise, V degree.
- 19 December 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (3)
Composite Microwave‐Absorbing Materials with Magnetic Constituents: State‐of‐the‐Art and Possible Ways for Improving their Parameters
The rapid progress of wireless technologies and telecommunications requires the development of microwave‐absorbing materials (also known as radio‐absorbing materials or radar‐absorbing materials), since electromagnetic radiation threatens human health and interferes with the operation of electronic devices. Microwave‐absorbing materials are also used to conceal “sensitive” targets, in particular, specific military equipment. This review considers the current state of composite microwave‐absorbing materials engineering, focusing on the materials containing magnetic components. The mechanisms of magnetic absorption and methods for measuring complex permittivity and permeability are described. Two types of ferrites (spinels, hexaferrites) having different natural ferromagnetic resonance frequencies are analyzed. It is pointed out that in the hexagonal structure, cationic substitutions substantially influence the magnitude of crystallographic anisotropy field and may both increase and decrease the ferromagnetic resonance frequency. Such ferrites can be used for microwave‐absorbing materials operating at frequencies up to tens and even 100 GHz. A review describes methods for ferromagnetic nanoparticles synthesis and shows their influence on the microwave absorption through the size and shape of nanoparticles. Examples of various microwave‐absorbing materials are presented, their characteristics are given. From the analysis of literature publications, the directions for future research are formulated, and ways for improving the properties of microwave‐absorbing materials are outlined.
- 19 December 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (3)
Composite Microwave‐Absorbing Materials with Magnetic Constituents: State‐of‐the‐Art and Possible Ways for Improving their Parameters
The rapid progress of wireless technologies and telecommunications requires the development of microwave‐absorbing materials (also known as radio‐absorbing materials or radar‐absorbing materials), since electromagnetic radiation threatens human health and interferes with the operation of electronic devices. Microwave‐absorbing materials are also used to conceal “sensitive” targets, in particular, specific military equipment. This review considers the current state of composite microwave‐absorbing materials engineering, focusing on the materials containing magnetic components. The mechanisms of magnetic absorption and methods for measuring complex permittivity and permeability are described. Two types of ferrites (spinels, hexaferrites) having different natural ferromagnetic resonance frequencies are analyzed. It is pointed out that in the hexagonal structure, cationic substitutions substantially influence the magnitude of crystallographic anisotropy field and may both increase and decrease the ferromagnetic resonance frequency. Such ferrites can be used for microwave‐absorbing materials operating at frequencies up to tens and even 100 GHz. A review describes methods for ferromagnetic nanoparticles synthesis and shows their influence on the microwave absorption through the size and shape of nanoparticles. Examples of various microwave‐absorbing materials are presented, their characteristics are given. From the analysis of literature publications, the directions for future research are formulated, and ways for improving the properties of microwave‐absorbing materials are outlined.
- Open Access
- 6 August 2025
- Published by Institute of Physics, Polish Academy of Sciences in Acta Physica Polonica A
- Vol. 148 (1) , 12
Tailoring Magnetic Properties of Cubic Spinel Ferrite Core–Shell Nanoparticles for Magnetoresistive Engineering
Magnetite nanoparticles with a cobalt ferrite shell provide the opportunity to obtain a tunneling magnetoresistance structure and offer an additional degree of freedom in shaping the magnetoresistive characteristics. In order to investigate the effect of the relative fractions of the shell on magnetic and magnetoresistive properties, we have prepared (by chemical co-precipitation) a bi-magnetic (soft/hard) core–shell Fe3O4/CoFe2O4 nanoparticle system (with diameters of a few nm). The structural, magnetic, and electric transport properties of the as-prepared core precursor, core–shell nanoparticles, and sintered powder were determined. It was found that the obtained particles, which are few nanometers in size, have the desired single-crystalline spinel structure with a core–shell architecture and the expected magnetic properties associated with core–shell interactions. Sintering leads to more complex magnetic behavior and tunneling conductance.
- 6 August 2025
- Published by Institute of Physics, Polish Academy of Sciences in Acta Physica Polonica A
- Vol. 148 (1) , 12
Open AccessTailoring Magnetic Properties of Cubic Spinel Ferrite Core–Shell Nanoparticles for Magnetoresistive Engineering
Magnetite nanoparticles with a cobalt ferrite shell provide the opportunity to obtain a tunneling magnetoresistance structure and offer an additional degree of freedom in shaping the magnetoresistive characteristics. In order to investigate the effect of the relative fractions of the shell on magnetic and magnetoresistive properties, we have prepared (by chemical co-precipitation) a bi-magnetic (soft/hard) core–shell Fe3O4/CoFe2O4 nanoparticle system (with diameters of a few nm). The structural, magnetic, and electric transport properties of the as-prepared core precursor, core–shell nanoparticles, and sintered powder were determined. It was found that the obtained particles, which are few nanometers in size, have the desired single-crystalline spinel structure with a core–shell architecture and the expected magnetic properties associated with core–shell interactions. Sintering leads to more complex magnetic behavior and tunneling conductance.
- 1 May 2025
- Published by AIP Publishing in Low Temperature Physics
- Vol. 51 (5) , 578-582
Transformation of magnetic parameters in substituted lanthanum manganites upon transition to the nanoscale state
Magnetic properties of substituted lanthanum manganite La0.77Sr0.23MnO3 nanoparticles prepared by sol-gel synthesis, as well as ceramics based on them have been studied. The temperature dependence of the magnetization and effective anisotropy was analyzed for both kinds of samples. The law of approximation of magnetization to saturation was used to quantify the behavior in the region of high magnetic fields, and the limits of its application were specified. The magnetic anisotropy of nanoparticles and ceramic samples was compared, and the influence of size effects on magnetic characteristics was discussed.
- 1 May 2025
- Published by AIP Publishing in Low Temperature Physics
- Vol. 51 (5) , 578-582
Transformation of magnetic parameters in substituted lanthanum manganites upon transition to the nanoscale state
Magnetic properties of substituted lanthanum manganite La0.77Sr0.23MnO3 nanoparticles prepared by sol-gel synthesis, as well as ceramics based on them have been studied. The temperature dependence of the magnetization and effective anisotropy was analyzed for both kinds of samples. The law of approximation of magnetization to saturation was used to quantify the behavior in the region of high magnetic fields, and the limits of its application were specified. The magnetic anisotropy of nanoparticles and ceramic samples was compared, and the influence of size effects on magnetic characteristics was discussed.
- 4 April 2024
- Published by Elsevier in Materials Research Bulletin
- Vol. 176
Development and possible applications of tunable elements based on composite materials
- 4 April 2024
- Published by Elsevier in Materials Research Bulletin
- Vol. 176
Development and possible applications of tunable elements based on composite materials
- Open Access
- 24 February 2023
- Published by V.I. Vernadsky Institute of General and Inorganic Chemistry in Ukrainian Chemistry Journal
- Vol. 89 (1) , 3-17
SYNTHESIS AND INVESTIGATION OF ELECTROCHEMICAL CHARACTERISTICS OF OXIDE Li-CONDUCTIVE MATERIALS WITH SPINEL AND PEROSKITE STRUCTURES
Lithium-ion batteries (LIBs) are widely used in electronic devices due to their numerous advantages, namely high energy density, high capacity, and long service life. One of the important components of a battery is the anode. In order to ensure high characteristics of LIB, the anode material must have high capacity, high ionic and electronic conductivities, and low cost. However, commonly used anode materials in lithium-ion batteries have a number of disadvantages. For example, a graphite-based anode is characterized by significant changes in volume during intercalation/deintercalation of lithium ions, high energy losses, and rapid deterioration of characteristics at high discharge/charge rates; Li4Ti5O12 have a low theoretical specific capacity, low electronic conductivity and low diffusion rate of lithium ions. Thus, the search for anode materials with high capacity and capability rate, as well as small volume change during lithium intercalation/deintercalation, remains an urgent task. A promising way may be the use of materials with intercalation pseudocapacitive behavior of charge accumulation, which occurs due to the intercalation of ions in tunnels or layers of active materials without a crystallographic phase transition. LixLa2/3-x/3TiO3 is well known as a superionic conductor with a high ionic conductivity σ ≈ 10–3 S/cm at room temperature. It crystallizes in a perovskite-type structure that consists of a framework of TiO6 octahedra stabilized by La atoms, and has numerous vacancies in the unoccupied positions 18d and 6a, that could participate in the storage and motion of Li ions. Electrochemical characteristics of LixLa2/3-x/3TiO3 (x = 0.35 and 0.5) anode materials with a perovskite structure were investigated and compared with the electrochemical characteristics of Li4Ti5O12 with a layered spinel structure.
- 24 February 2023
- Published by V.I. Vernadsky Institute of General and Inorganic Chemistry in Ukrainian Chemistry Journal
- Vol. 89 (1) , 3-17
Open AccessSYNTHESIS AND INVESTIGATION OF ELECTROCHEMICAL CHARACTERISTICS OF OXIDE Li-CONDUCTIVE MATERIALS WITH SPINEL AND PEROSKITE STRUCTURES
Lithium-ion batteries (LIBs) are widely used in electronic devices due to their numerous advantages, namely high energy density, high capacity, and long service life. One of the important components of a battery is the anode. In order to ensure high characteristics of LIB, the anode material must have high capacity, high ionic and electronic conductivities, and low cost. However, commonly used anode materials in lithium-ion batteries have a number of disadvantages. For example, a graphite-based anode is characterized by significant changes in volume during intercalation/deintercalation of lithium ions, high energy losses, and rapid deterioration of characteristics at high discharge/charge rates; Li4Ti5O12 have a low theoretical specific capacity, low electronic conductivity and low diffusion rate of lithium ions. Thus, the search for anode materials with high capacity and capability rate, as well as small volume change during lithium intercalation/deintercalation, remains an urgent task. A promising way may be the use of materials with intercalation pseudocapacitive behavior of charge accumulation, which occurs due to the intercalation of ions in tunnels or layers of active materials without a crystallographic phase transition. LixLa2/3-x/3TiO3 is well known as a superionic conductor with a high ionic conductivity σ ≈ 10–3 S/cm at room temperature. It crystallizes in a perovskite-type structure that consists of a framework of TiO6 octahedra stabilized by La atoms, and has numerous vacancies in the unoccupied positions 18d and 6a, that could participate in the storage and motion of Li ions. Electrochemical characteristics of LixLa2/3-x/3TiO3 (x = 0.35 and 0.5) anode materials with a perovskite structure were investigated and compared with the electrochemical characteristics of Li4Ti5O12 with a layered spinel structure.
- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 6, 82-86
Dielectric Microwave Components with Magnetic Films for Communications
Thick films of $\mathbf{Ni}_{1\text{-}\mathbf{x}}\mathbf{Zn}_{\mathbf{x}}\mathbf{Fe}_{2}\mathbf{O}_{4}$ ferrites were polymerized on the dielectric $\mathbf{BaTi}_{4}\mathbf{O}_{9}\text{-}\mathbf{ZnO}$ substrates using suspensions consisting of photopolymer and weakly agglomerated ferrimagnetic particles. Structures including magnetic and nonmagnetic components make it possible to control the energy transfer and operating frequencies while maintaining the relatively high quality factor of the structure. The optimal composition of film and other features of film obtaining were revealed. The maximal controlled by magnetic field change in resonance frequency for obtained elements was around 71 MHz. The value of the decoupling was around 60 dB. Such elements can operate as microwave valves, phase shifters, and resonators and be used in GSM, 5G networks.- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 6, 82-86
Dielectric Microwave Components with Magnetic Films for Communications
Thick films of $\mathbf{Ni}_{1\text{-}\mathbf{x}}\mathbf{Zn}_{\mathbf{x}}\mathbf{Fe}_{2}\mathbf{O}_{4}$ ferrites were polymerized on the dielectric $\mathbf{BaTi}_{4}\mathbf{O}_{9}\text{-}\mathbf{ZnO}$ substrates using suspensions consisting of photopolymer and weakly agglomerated ferrimagnetic particles. Structures including magnetic and nonmagnetic components make it possible to control the energy transfer and operating frequencies while maintaining the relatively high quality factor of the structure. The optimal composition of film and other features of film obtaining were revealed. The maximal controlled by magnetic field change in resonance frequency for obtained elements was around 71 MHz. The value of the decoupling was around 60 dB. Such elements can operate as microwave valves, phase shifters, and resonators and be used in GSM, 5G networks.- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 13, 683-686
Magnetic Properties of Solid Solutions $\mathbf{Ni_{1-x}Zn_{x}Fe_{2}O_{4}}$ Prepared by Stepwise PrecipitationSolid solutions of nickel-zinc ferrites, $\mathbf{Ni_{1-x}Zn_{x}Fe_{2}O_{4}}$ , were synthesized by stepwise precipitation from aqueous solutions of metals nitrates. Single-phased crystalline spinel ferrites are obtained after the heat treatment at $800^{\circ}\mathrm{C}$ for 2 hours. It was found that the increase in zinc content leads to an increase in the size of nanoparticles. Le Bail method was used to determine lattice parameters of ferrite particles, it was found, that crystal lattice parameters increase with Zn content. Magnetization in the $\mathbf{Ni_{1-x}Zn_{x}Fe_{2}O_{4}}$ system passes through the maximum at $x=0.45$ . The reason for the nonmonotonic behavior of magnetization is a change in the interrelation of superchangeable interactions in the magnetic structure of the material.- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 13, 683-686
Magnetic Properties of Solid Solutions $\mathbf{Ni_{1-x}Zn_{x}Fe_{2}O_{4}}$ Prepared by Stepwise PrecipitationSolid solutions of nickel-zinc ferrites, $\mathbf{Ni_{1-x}Zn_{x}Fe_{2}O_{4}}$ , were synthesized by stepwise precipitation from aqueous solutions of metals nitrates. Single-phased crystalline spinel ferrites are obtained after the heat treatment at $800^{\circ}\mathrm{C}$ for 2 hours. It was found that the increase in zinc content leads to an increase in the size of nanoparticles. Le Bail method was used to determine lattice parameters of ferrite particles, it was found, that crystal lattice parameters increase with Zn content. Magnetization in the $\mathbf{Ni_{1-x}Zn_{x}Fe_{2}O_{4}}$ system passes through the maximum at $x=0.45$ . The reason for the nonmonotonic behavior of magnetization is a change in the interrelation of superchangeable interactions in the magnetic structure of the material.- 26 August 2022
- Published by V.I. Vernadsky Institute of General and Inorganic Chemistry in Ukrainian Chemistry Journal
- Vol. 88 (7) , 16-28
MICROEMULSION-BASED METHOD OF SYNTHESIS OF ZINC-NICKEL FERRITE AND THEIR MAGNETIC PROPERTIES
Solid solutions of nickel-zinc ferrites ZnxNi1-xFe2O4 were synthesized by two different methods: synthesis in microemulsions and by stepwise precipitation. The properties of the resulted nano-sized particles synthesized by two different methods were compared. It was found that the increase in zinc content leads to an increase in the lattice parameters. During the synthesis by the method of microemulsions, the temperature of a single-phase product formation is 400 °C, while by the method of precipitation, a single-phase product formation begins at 600 °C. It was shown that the materials synthesized by both methods have similar unit cell parameters. The average size of ferrite nanoparticles synthesized in microemulsions is smaller, lattice strain is higher compared to ferrites synthesized by stepwise precipitation. Also, lower treatment temperatures provide higher stoichiometry, and homogeneity of materials while magnetization difference is negligible. The particles of the obtained powders have high saturation magnetization Ms = 45.6 Am2/kg for synthesis from microemulsions and Ms = 44.8 Am2/kg for co-precipitated samples, the low coercive force Hc = 1.3 kA/m and Hc = 3 kA/m, respectively. Changes made make synthesized particles more applicable in film deposition, and manufacturing of high-quality magnetic coatings.
- 26 August 2022
- Published by V.I. Vernadsky Institute of General and Inorganic Chemistry in Ukrainian Chemistry Journal
- Vol. 88 (7) , 16-28
MICROEMULSION-BASED METHOD OF SYNTHESIS OF ZINC-NICKEL FERRITE AND THEIR MAGNETIC PROPERTIES
Solid solutions of nickel-zinc ferrites ZnxNi1-xFe2O4 were synthesized by two different methods: synthesis in microemulsions and by stepwise precipitation. The properties of the resulted nano-sized particles synthesized by two different methods were compared. It was found that the increase in zinc content leads to an increase in the lattice parameters. During the synthesis by the method of microemulsions, the temperature of a single-phase product formation is 400 °C, while by the method of precipitation, a single-phase product formation begins at 600 °C. It was shown that the materials synthesized by both methods have similar unit cell parameters. The average size of ferrite nanoparticles synthesized in microemulsions is smaller, lattice strain is higher compared to ferrites synthesized by stepwise precipitation. Also, lower treatment temperatures provide higher stoichiometry, and homogeneity of materials while magnetization difference is negligible. The particles of the obtained powders have high saturation magnetization Ms = 45.6 Am2/kg for synthesis from microemulsions and Ms = 44.8 Am2/kg for co-precipitated samples, the low coercive force Hc = 1.3 kA/m and Hc = 3 kA/m, respectively. Changes made make synthesized particles more applicable in film deposition, and manufacturing of high-quality magnetic coatings.