Dongyue Li
Dongyue Li has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Buffo
Department of Applied Science and Technology, Politecnico di Torino, Corso Duca Degli Abruzzi 24, 10129 Torino, Italy
4 shared publications - Daniele Luca Marchisio
Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy
4 shared publications Zhengming Gao
4 shared publications- Christian Hasse
Technical University of Darmstadt
2 shared publications Lei Guo
2 shared publicationsWioletta Podgórska
2 shared publications
Latest Publications
- Open Access
Indoor Transmission of Respiratory Droplets Under Different Ventilation Systems Using the Eulerian Approach for the Dispersed Phase
Infectious diseases can spread through virus-laden respiratory droplets exhaled into the air. Ventilation systems are crucial in indoor settings as they can dilute or eliminate these droplets, underscoring the importance of understanding their efficacy in the management of indoor infections. Within the field of fluid dynamics methods, the dispersed droplets may be approached through either a Lagrangian framework or an Eulerian framework. In this study, various Eulerian methodologies are systematically compared against the Eulerian–Lagrangian (E-L) approach across three different scenarios: the pseudo-single-phase model (PSPM) for assessing the transport of gaseous pollutants in an office with displacement ventilation (DV), stratum ventilation (SV), and mixing ventilation (MV); the two-fluid model (TFM) for evaluating the transport of non-evaporating particles within an office with DV and MV; and the two-fluid model-population balance equation (TFM-PBE) approach for analyzing the transport of evaporating droplets in a ward with MV. The Eulerian and Lagrangian approaches present similar agreement with the experimental data, indicating that the two approaches are comparable in accuracy. The computational cost of the E-L approach is closely related to the number of tracked droplets; therefore, the Eulerian approach is recommended when the number of droplets required by the simulation is large. Finally, the performances of DV, SV, and MV are presented and discussed. DV creates a stratified environment due to buoyant flows, which transport respiratory droplets upward. MV provides a well-mixed environment, resulting in a uniform dispersion of droplets. SV supplies fresh air directly to the breathing zone, thereby effectively reducing infection risk. Consequently, DV and SV are preferred to reduce indoor infection.
Open AccessIndoor Transmission of Respiratory Droplets Under Different Ventilation Systems Using the Eulerian Approach for the Dispersed Phase
Infectious diseases can spread through virus-laden respiratory droplets exhaled into the air. Ventilation systems are crucial in indoor settings as they can dilute or eliminate these droplets, underscoring the importance of understanding their efficacy in the management of indoor infections. Within the field of fluid dynamics methods, the dispersed droplets may be approached through either a Lagrangian framework or an Eulerian framework. In this study, various Eulerian methodologies are systematically compared against the Eulerian–Lagrangian (E-L) approach across three different scenarios: the pseudo-single-phase model (PSPM) for assessing the transport of gaseous pollutants in an office with displacement ventilation (DV), stratum ventilation (SV), and mixing ventilation (MV); the two-fluid model (TFM) for evaluating the transport of non-evaporating particles within an office with DV and MV; and the two-fluid model-population balance equation (TFM-PBE) approach for analyzing the transport of evaporating droplets in a ward with MV. The Eulerian and Lagrangian approaches present similar agreement with the experimental data, indicating that the two approaches are comparable in accuracy. The computational cost of the E-L approach is closely related to the number of tracked droplets; therefore, the Eulerian approach is recommended when the number of droplets required by the simulation is large. Finally, the performances of DV, SV, and MV are presented and discussed. DV creates a stratified environment due to buoyant flows, which transport respiratory droplets upward. MV provides a well-mixed environment, resulting in a uniform dispersion of droplets. SV supplies fresh air directly to the breathing zone, thereby effectively reducing infection risk. Consequently, DV and SV are preferred to reduce indoor infection.
- 22 January 2024
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 146 (4) , 1-19
Impacts of the Bottom Vortex on the Surrounding Flow Characteristics of a Semi-Submerged Rectangular Cylinder Under Four Aspect Ratios
Vortex has attracted attention because it is the main factor affecting the flow characteristics around offshore structures. This paper researches the flow field variations around a semi-submerged rectangular cylinder (SRC) under four aspect ratios, thereby revealing the bottom vortex effects on the flow field at Reynolds number = 36,300. According to the particle image velocimetry (PIV) data, the renormalization group (RNG) k–ε model is selected as an applicable turbulence model for studying SRC flow characteristics. From the results, the bottom vortex generation and streamwise velocity are inseparable. As the draft increases, the increased range of the bottom vortex would directly interfere with the flow characteristic around the SRC. Since the wake vortex forms a reattachment state when the SRC pierces the free surface, its flow field could be disturbed by the bottom vortex. Furthermore, the bottom vortex also affects the extreme point position of the boundary layer characteristic at the SRC bottom.
- 22 January 2024
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 146 (4) , 1-19
Impacts of the Bottom Vortex on the Surrounding Flow Characteristics of a Semi-Submerged Rectangular Cylinder Under Four Aspect Ratios
Vortex has attracted attention because it is the main factor affecting the flow characteristics around offshore structures. This paper researches the flow field variations around a semi-submerged rectangular cylinder (SRC) under four aspect ratios, thereby revealing the bottom vortex effects on the flow field at Reynolds number = 36,300. According to the particle image velocimetry (PIV) data, the renormalization group (RNG) k–ε model is selected as an applicable turbulence model for studying SRC flow characteristics. From the results, the bottom vortex generation and streamwise velocity are inseparable. As the draft increases, the increased range of the bottom vortex would directly interfere with the flow characteristic around the SRC. Since the wake vortex forms a reattachment state when the SRC pierces the free surface, its flow field could be disturbed by the bottom vortex. Furthermore, the bottom vortex also affects the extreme point position of the boundary layer characteristic at the SRC bottom.
- 3 August 2023
- Published by Springer Nature in Acta Geotechnica
- Vol. 19 (4) , 1929-1942
Volume-of-fluid-based implementation for the spatiotemporal variation of viscosity in grouting process: transport time tracking approach
- 3 August 2023
- Published by Springer Nature in Acta Geotechnica
- Vol. 19 (4) , 1929-1942
Volume-of-fluid-based implementation for the spatiotemporal variation of viscosity in grouting process: transport time tracking approach
- 1 May 2020
- Published by Elsevier in Applied Thermal Engineering
- Vol. 171
Numerical analysis of gasification characteristics in combined coal gasification and flash ironmaking process
- 1 May 2020
- Published by Elsevier in Applied Thermal Engineering
- Vol. 171
Numerical analysis of gasification characteristics in combined coal gasification and flash ironmaking process
- 1 March 2020
- Published by Elsevier in Applied Thermal Engineering
- Vol. 168
Numerical simulation of the gasification-reduction coupling process in the innovative multi-generation system
- 1 March 2020
- Published by Elsevier in Applied Thermal Engineering
- Vol. 168
Numerical simulation of the gasification-reduction coupling process in the innovative multi-generation system
- Open Access
Investigation of the force closure for Eulerian-Eulerian simulations: a validation study of nine gas-liquid flow cases
Gas-liquid flows can be simulated by the Eulerian-Eulerian (E-E) method. Whether to include a specific momentum interfacial exchange force model remains as a question with no answer. In this work, our aim is to seek a general numerical settings for the E-E method, which can provide competent results for industrial bubbly flows with different geometries under different operations. They were selected from different industries including chemical, nuclear, bio-processing and metallurgical engineering. Simulations were launched by the OpenFOAM solver reactingTwoPhaseEulerFoam, in which the E-E method was implemented with sophisticated numerical techniques to ensure stabilities. Predictions were compared against experimental data. It was found that the drag force and turbulent dispersion force play the most important role on the predictions and should be included for all simulations. The first one accounts for the two-way coupling while the second one accounts for the turbulence effect and ensures the E-E equations to be well-posed. The lift force and wall lubrication force should be included to address the phase fraction accumulation in the vicinity of the wall, especially for pipe flows with large aspect ratio. In other cases the lateral forces can be safely neglected. All the test case are open-sourced and are available as supplementary data for anyone to download as baseline test cases.
Open AccessInvestigation of the force closure for Eulerian-Eulerian simulations: a validation study of nine gas-liquid flow cases
Gas-liquid flows can be simulated by the Eulerian-Eulerian (E-E) method. Whether to include a specific momentum interfacial exchange force model remains as a question with no answer. In this work, our aim is to seek a general numerical settings for the E-E method, which can provide competent results for industrial bubbly flows with different geometries under different operations. They were selected from different industries including chemical, nuclear, bio-processing and metallurgical engineering. Simulations were launched by the OpenFOAM solver reactingTwoPhaseEulerFoam, in which the E-E method was implemented with sophisticated numerical techniques to ensure stabilities. Predictions were compared against experimental data. It was found that the drag force and turbulent dispersion force play the most important role on the predictions and should be included for all simulations. The first one accounts for the two-way coupling while the second one accounts for the turbulence effect and ensures the E-E equations to be well-posed. The lift force and wall lubrication force should be included to address the phase fraction accumulation in the vicinity of the wall, especially for pipe flows with large aspect ratio. In other cases the lateral forces can be safely neglected. All the test case are open-sourced and are available as supplementary data for anyone to download as baseline test cases.
- Open Access
- 25 July 2019
- Published by Wiley in AIChE Journal
- Vol. 65 (11)
Comparison of Eulerian QBMM and classical Eulerian–Eulerian method for the simulation of polydisperse bubbly flows
The spatial gas distribution of poly‐disperse bubbly flows depends greatly on the bubble size. To reflect the resulting polycelerity, more than two momentum balance equations (typically for the gas and liquid phases) have to be considered, as done in the multifluid approach. The inhomogeneous multiple‐size group model follows this approach, also combined with a population balance model. As an alternative, in a previous work, an Eulerian quadrature‐based moments method (E‐QBMM) was implemented in OpenFOAM; however, only the drag force was included. In this work, different nondrag forces (lift, wall lubrication, and turbulent dispersion) are added to enable more complex test cases to be simulated. Simulation results obtained using E‐QBMM are compared with the classical E–E method and validated against experimental data for different test cases. The results show that there is good agreement between E‐QBMM and E–E methods for mono‐disperse cases, but E‐QBMM can better simulate the separation and segregation of small and large bubbles.
- 25 July 2019
- Published by Wiley in AIChE Journal
- Vol. 65 (11)
Open AccessComparison of Eulerian QBMM and classical Eulerian–Eulerian method for the simulation of polydisperse bubbly flows
The spatial gas distribution of poly‐disperse bubbly flows depends greatly on the bubble size. To reflect the resulting polycelerity, more than two momentum balance equations (typically for the gas and liquid phases) have to be considered, as done in the multifluid approach. The inhomogeneous multiple‐size group model follows this approach, also combined with a population balance model. As an alternative, in a previous work, an Eulerian quadrature‐based moments method (E‐QBMM) was implemented in OpenFOAM; however, only the drag force was included. In this work, different nondrag forces (lift, wall lubrication, and turbulent dispersion) are added to enable more complex test cases to be simulated. Simulation results obtained using E‐QBMM are compared with the classical E–E method and validated against experimental data for different test cases. The results show that there is good agreement between E‐QBMM and E–E methods for mono‐disperse cases, but E‐QBMM can better simulate the separation and segregation of small and large bubbles.
- 1 March 2019
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 27 (3) , 483-500
Quadrature-based moment methods for the population balance equation: An algorithm review
- 1 March 2019
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 27 (3) , 483-500
Quadrature-based moment methods for the population balance equation: An algorithm review
- 1 October 2018
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 26 (10) , 2009-2013
Compressibility induced bubble size variation in bubble column reactors: Simulations by the CFD–PBE
- 1 October 2018
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 26 (10) , 2009-2013
Compressibility induced bubble size variation in bubble column reactors: Simulations by the CFD–PBE
- 1 December 2017
- Published by Elsevier in Chemical Engineering Science
- Vol. 174, 25-39
Simulation of bubbly flows with special numerical treatments of the semi-conservative and fully conservative two-fluid model
- 1 December 2017
- Published by Elsevier in Chemical Engineering Science
- Vol. 174, 25-39
Simulation of bubbly flows with special numerical treatments of the semi-conservative and fully conservative two-fluid model