Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Lucy Teresa González has a total of 120 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrating Quantum Computing into Sustainable Carbon-Capture Materials Research: Opportunities and Perspectives

    by Hernández- Romero, Ilse María, Isaac Oliva-González, Lara Montaño, Oscar D., Karina Hernández-Romero, Esquivel- Patiño, Gerardo G., Oxana Kharissova, Aldo I. Ramírez, et al.

  • Open Access

    A Hybrid Quantum–Classical Machine Learning Framework for Black Carbon Forecasting

    by Isaac Oliva-González, Lucy T. González, Oscar D. Lara-Montaño, Aldo I. Ramirez, Alberto Mendoza, Ilse María Hernández-Romero

    Black carbon (BC) is a critical short-lived climate pollutant with severe health and climate impacts, yet forecasting its hourly dynamics remains challenging due to nonlinear interactions between meteorological conditions and co-emitted pollutants. Accurate forecasting is particularly relevant in regions facing persistent air quality issues, where BC frequently exceeds recommended limits and poses significant risks to public health. This study develops a data-driven forecasting framework that integrates ensemble learning with hybrid quantum–classical neural architectures, benchmarked using 8760 hourly records from Santa Catarina in the Monterrey Metropolitan Area (Mexico). Ensemble methods provided the most reliable baseline, with XGBoost ( $\mathrm{R}^{2} = 0.80$ R 2 = 0.80 , RMSE = 614.32 ng m −3 ) and CatBoost ( $\mathrm{R}^{2} = 0.80$ R 2 = 0.80 , RMSE = 614.06 ng m −3 ) effectively capturing pollutant–meteorology dependencies. In contrast, a purely quantum neural network underperformed ( $\mathrm{R}^{2} = 0.62$ R 2 = 0.62 ), whereas its hybrid quantum–classical counterpart improved predictive accuracy ( $\mathrm{R}^{2} = 0.72$ R 2 = 0.72 ) and exhibited more stable convergence, highlighting the benefits of combining quantum representations with classical optimization under current hardware constraints. Dimensionality reduction through Principal Component Analysis (six components retaining 91% of variance) had a limited effect on ensemble models but reduced the ability of neural and quantum architectures to capture extreme pollution events above 3000 ng m −3 . These findings elucidate how machine learning architectures represent the temporal dynamics of short-lived climate pollutants and support the development of adaptive early-warning systems for air quality management. The proposed hybrid framework provides a reproducible and extensible basis for applying quantum computing techniques to environmental forecasting, establishing a methodological foundation for future quantum–environmental research.

  • Open Access

    Assessing black carbon sources with aethalometer data and ambient ΔBC/ΔCO ratios analysis

    by Ilse María Hernández, Lucy T. González, Yasmany Mancilla, Francisco E. Longoria-Rodríguez, Juan Manuel Alfaro, Michael Pérez-Rodríguez, Alberto Mendoza

    Black Carbon (BC) is a key component of fine particulate matter (PM2.5) as it has significant health and climate impacts. This paper examines BC source contributions at two urban sites in the Monterrey Metropolitan Area (MMA), one of Latin America’s most polluted urban areas. The proposed approach combines the traditional aethalometer model with ambient ΔBC/ΔCO ratios to refine source attribution estimates. Hourly average air quality data (including BC measurements from aethalometer equipment) and meteorological data were collected over one year from two sites: a suburban upwind site and an urban site downwind of major anthropogenic sources. Preliminary data analysis involved assessing correlations between BC and other pollutants, performing Principal Component Analysis, and exploring BC variation patterns to define the appropriate use of ΔBC/ΔCO ratios as a complement to the aethalometer model. Percentile pairs of ΔBC/ΔCO ratios were used to estimate source contributions, representing “pure” emissions from fossil fuel combustion and biomass burning. The best-fit ratios were identified as 0.4 (fossil fuel) and 17.2 (biomass burning), obtained from the 2.5 and 97.5 percentiles. With this, the estimated biomass-burning Absorption Ångström Exponent was found to be 2.34, higher than the commonly used value of 2 when applying the aethalometer model. This adjustment resulted in a reduction in biomass burning contribution estimates of 6–8%. The integration of the aethalometer model with ambient ΔBC/ΔCO ratios can provide a more accurate regional assessment of BC sources, demonstrating significant variations in BC contributions depending on local emission activities and meteorological conditions.


  • Open Access

    Source attribution, health risk analysis, and policy implications of PAHs and NPAHs in PM$_{10}$ in Northern Mexico

    by Lucy T. González, Ilse María Hernández-Romero, Alberto Mendoza, Aldo I. Ramirez, Yasmany Mancilla, Boris Kharissov, Michael Pérez-Rodríguez, Juan Manuel Alfaro Barbosa, Daniel López Serna, Oxana Kharissova, et al.

    This research investigates the concentrations, sources, and health risks of polycyclic aromatic hydrocarbons (PAHs) and nitrated PAHs (NPAHs) in particulate matter with an aerodynamic diameter of 10 \(\mu\)m or less (PM\(_{10}\)) from critical urban centers in northern Mexico: Metropolitan Monterrey Area (MMA), Chihuahua (CHI), and Ciudad Juárez (CDJ). Advanced gas chromatography-mass spectrometry (GC-MS and GC-NCI-MS) revealed significant PAHs concentrations, with levels in MMA reaching 108.89 ± 99.90 ng/m\(^3\), CHI at 100.69 ± 122.60 ng/m\(^3\) and CDJ at 73.26 ± 90.85 ng/m\(^3\). Significantly, 3-nitrofluoranthene (3N-FLA) and 1-nitropyrene (1N-PYR), known for their potent toxicity, were among the most prominent NPAHs, with total concentrations in MMA, CHI, and CDJ at 470.32 pg/m\(^3\), 247.26 pg/m\(^3\), and 193.20 pg/m\(^3\), respectively. Source apportionment using diagnostic ratios (DRs) and principal component analysis (PCA) indicated that biomass burning, vehicular emissions, and industrial activities were the primary sources of MMA. At the same time, CHI and CDJ were influenced more by industrial and diesel emissions. Health risk assessments based on benzo[a]pyrene equivalent (BaPeq) concentrations and excess cancer risk (ECR) demonstrated moderate to significant cancer risks, with CDJ exhibiting the highest NPAHs-related risk. This study makes several significant contributions: it presents the first analysis of PAHs and NPAHs levels in these urban areas, identifies key emission sources, and quantifies associated health risks, providing essential data for developing targeted public health policies and environmental regulations.


  • Open Access

    Enhancing Visible Light Photocatalytic Degradation of Bisphenol A Using BiOI/Bi2MoO6 Heterostructures

    by Magaly Y. Nava Núñez, Moisés Ávila Rehlaender, Azael Martínez-De la Cruz, Arturo Susarrey-Arce, Francisco Mherande Cuevas-Muñiz, Margarita Sánchez-Domínguez, Tania E. Lara-Ceniceros, José Bonilla-Cruz, Alejandro Arizpe Zapata, Patricia Cerda Hurtado, et al.

    With the growing population, access to clean water is one of the 21st-century world’s challenges. For this reason, different strategies to reduce pollutants in water using renewable energy sources should be exploited. Photocatalysts with extended visible light harvesting are an interesting route to degrade harmful molecules utilized in plastics, as is the case of Bisphenol A (BPA). This work uses a microwave-assisted route for the synthesis of two photocatalysts (BiOI and Bi2MoO6). Then, BiOI/Bi2MoO6 heterostructures of varied ratios were produced using the same synthetic routes. The BiOI/Bi2MoO6 with a flower-like shape exhibited high photocatalytic activity for BPA degradation compared to the individual BiOI and Bi2MoO6. The high photocatalytic activity was attributed to the matching electronic band structures and the interfacial contact between BiOI and Bi2MoO6, which could enhance the separation of photo-generated charges. Electrochemical, optical, structural, and chemical characterization demonstrated that it forms a BiOI/Bi2MoO6 p-n heterojunction. The free radical scavenging studies showed that superoxide radicals (O2•−) and holes (h+) were the main reactive species, while hydroxyl radical (•OH) generation was negligible during the photocatalytic degradation of BPA. The results can potentiate the application of the microwave synthesis of photocatalytic materials.


  • Insights from the combined bulk chemical and surface characterization of airborne PM10 on source contributions and health risk: the case of three Mexican cities

    by Michael Pérez-Rodríguez, F.E. Longoria Rodríguez, Yasmany Mancilla, Karim Acuña-Askar, Alfredo Campos, Luis A. Peña González, Luis G. Silva Vidaurri, Alejandro Arizpe Zapata, Andrea Nucamendi, Oxana Karissova, et al.


  • Open Access

    Rice Labeling according to Grain Quality Features Using Laser-Induced Breakdown Spectroscopy

    by Michael Pérez-Rodríguez, Alberto Mendoza, Lucy T. González, Alan Lima Vieira, Roberto Gerardo Pellerano, José Anchieta Gomes Neto, Edilene Cristina Ferreira

    Rice is an important source of nutrition and energy consumed around the world. Thus, quality inspection is crucial for protecting consumers and increasing the rice’s value in the productive chain. Currently, methods for rice labeling depending on grain quality features are based on image and/or visual inspection. These methods have shown subjectivity and inefficiency for large-scale analyses. Laser-induced breakdown spectroscopy (LIBS) is an analytical technique showing attractive features due to how quick the analysis can be carried out and its capability of providing spectra that are true fingerprints of the sample’s elemental composition. In this work, LIBS performance was evaluated for labeling rice according to grain quality features. The LIBS spectra of samples with their grain quality numerically described as Type 1, 2, and 3 were measured. Several spectral processing methods were evaluated when modeling a k-nearest neighbors (k-NN) classifier. Variable selection was also carried out by principal component analysis (PCA), and then the optimal k-value was selected. The best result was obtained by applying spectrum smoothing followed by normalization by using the first fifteen principal components (PCs) as input variables and k = 9. Under these conditions, the method showed excellent performance, achieving sample classification with 94% overall prediction accuracy. The sensitivities ranged from 90 to 100%, and specificities were in the range of 92–100%. The proposed method has remarkable characteristics, e.g., analytical speed and analysis guided by chemical responses; therefore, the method is not susceptible to subjectivity errors.


  • Open Access

    Chemical Composition, Optical Properties and Sources of PM2.5 From a Highly Urbanized Region in Northeastern Mexico

    by Karim Acuña Askar, Lucy T. González, Alberto Mendoza, Oxana V. Kharissova, Andrea Rodríguez-Garza, Eleazar M. Lara, Alfredo Campos, D. López-Serna, Lilia M. Bautista-Carrillo, J. M. Alfaro-Barbosa, et al.

    Here, we report the chemical composition and optical properties of the fine particles (PM2.5) and water-soluble organic carbon (WSOC) of these particles. Additionally, the potential sources of WSOC emission were determined through the study on fluorescence excitation–emission matrix spectra and parallel factor analysis (EEM-PARAFAC). Samples were collected in an urban site of the Monterrey Metropolitan Area in Mexico during summer and winter and characterized using attenuated total reflectance-Fourier-transform infrared spectroscopy (ATR-FTIR), ultraviolet-visible-near infrared-diffuse reflectance spectroscopy (UV–Vis-NIR-DRS), fluorescence spectroscopy, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) techniques. The ATR-FTIR analyses allowed the identification of inorganic ions (e.g., CO32−, SO42−, and NO3−), organic functional groups [e.g., carbonyls (C=O), organic hydroxyl (C-OH), carboxylic acid (COOH)], and aromatic and unsaturated aliphatic hydrocarbons. The results obtained by XRD and XPS revealed the presence of organic and inorganic chemical species in PM2.5. The diffuse reflectance spectra of PM2.5 provided the absorption bands in the UV region for CaSO4, CaCO3, and aluminosilicates. The absorption coefficient at 365 nm (Abs365) and Ångström absorption exponent (AAE) values obtained for the aqueous extracts suggest that many of the water-soluble organic compounds corresponded to brown carbon (BrC) chromophores. The mass absorption efficiency values at 365 nm (MAE365) were higher in the winter than summer samples, suggesting the presence of more BrC compounds in the winter samples. The fluorescence indices combined with EEM-PARAFAC analysis showed that the WSOC fraction was mainly composed of humic-like substances (HULIS) which are both of terrestrial and microbial origin.


  • Top Cited Papers
    Open Access

    Synthesis, Purification, and Characterization of Carbon Dots from Non-Activated and Activated Pyrolytic Carbon Black

    by Reyna Berenice González-González, Lucy Teresa González, Marc Madou, César Leyva-Porras, Sergio Omar Martinez-Chapa, Alberto Mendoza

    In this work, carbon dots were created from activated and non-activated pyrolytic carbon black obtained from waste tires, which were then chemically oxidized with HNO3. The effects caused to the carbon dot properties were analyzed in detail through characterization techniques such as ion chromatography; UV–visible, Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy; ζ potential; transmission electron microscopy (TEM); and spectrofluorometry. The presence of functional groups on the surface of all carbon dots was revealed by UV–visible, FTIR, XPS, and Raman spectra. The higher oxidation degrees of carbon dots from activated precursors compared to those from nonactivated precursors resulted in differences in photoluminescence (PL) properties such as bathochromic shift, lower intensity, and excitation-dependent behavior. The results demonstrate that the use of an activating agent in the recovery of pyrolytic carbon black resulted in carbon dots with different PL properties. In addition, a dialysis methodology is proposed to overcome purification obstacles, finding that 360 h were required to obtain pure carbon dots synthesized by a chemical oxidation method.


  • Open Access

    Determination and Similarity Analysis of PM2.5 Emission Source Profiles Based on Organic Markers for Monterrey, Mexico

    by Yasmany Mancilla, Gerardo Medina, Lucy T. González, Pierre Herckes, Matthew P. Fraser, Alberto Mendoza

    Source attribution of airborne particulate matter (PM) relies on a host of different chemical species. Organic molecular markers are a set of particularly useful marker compounds for estimating source contributions to the fine PM fraction (i.e., PM2.5). Although there are many source apportionment studies based on organic markers, these studies heavily rely on the few studies that report region-specific emission profiles. Source attribution efforts, particularly those conducted in countries with emerging economies, benefit from ad hoc information to conduct the corresponding analyses. In this study, we report organic molecular marker source profiles for PM2.5 emitted from 12 major sources types from five general source categories (meat cooking operations, vehicle exhausts, industries, biomass and trash burning, and urban background) for the Monterrey Metropolitan Area (Mexico). Source emission samples were obtained from a ground-based source-dominated sampling approach. Filter-based instruments were utilized, and the loaded filters were chemically characterized for organic markers by GC-MS. Levoglucosan and cholesterol dominate charbroiled-cooking operation sources while methoxyphenols, PAHs and hopanes dominate open-waste burning, vehicle exhaust and industrial emissions, respectively. A statistical analysis showed values of the Pearson distance < 0.4 and the similarity identity distance > 0.8 in all cases, indicating dissimilar source profiles. This was supported by the coefficient of divergence average values that ranged from 0.62 to 0.72. These profiles could further be utilized in receptor models to conduct source apportionment in regions with similar characteristics and can also be used to develop air pollution abatement strategies.