Nina Vorona
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nina Vorona has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Alla Makarynska
Odesa National University of Technology
15 shared publications - Bogdan Iegorov
Odesa National University of Technology
6 shared publications - Тетяна Михайлівна Турпурова
Odesa National University of Technology
4 shared publications - Alla Lapinska
Odesa National University of Technology
2 shared publications O. Khodakivskyi
2 shared publicationsOlena Voietska
Odessa National Academy of Food Technologies Kanatnaya str., 112, Odessa, Ukraine, 65039
2 shared publications
Latest Publications
- 12 October 2026
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 20 (3) , 201-211
EFFICIENCY OF USING PRODUCTS OF DEEP PROCESSING OF CORN GRAIN IN THE PRODUCTION OF LIVESTOCK PRODUCTS
Ukraine has basic production capacities in the field of deep corn processing, including enterprises for the production of starch, corn gluten and feed components. At the same time, the domestic market remains insufficiently diversified compared to leading international companies such as Cargill, Archer Daniels Midland or Ingredion Incorporated. These corporations are characterized by a high level of vertical integration and a wide range of products. The key difference is that international companies are focused on deep diversification and the production of high-value-added ingredients, while in Ukraine the sector is still focused mainly on basic processed products or on corn exports. Deep processing is very promising for Ukraine, as the country has a wide and diverse raw material base for the production of products with high added value. Deep processing makes it possible to eliminate the problem of delivering agricultural products abroad and increases the profit per ton of grain. The difference in the cost of corn grain and processed products is more than 100 euros per ton. The characteristics of deep-processed corn products and their uses are given. Recommendations for introducing deep-processed corn products into compound feeds are summarized, according to which the use of 5–10% concentrates, bran and DDGS in starter feeds for poultry and piglets is recommended. For adult animals, it can be increased to 15–20% in the diet. Control of nutrient balance - when introducing products with a high protein or energy content, it is necessary to adjust Ca:P, lysine, methionine. The use of starch production by-products allows replacing more expensive feed components (soybean meal, fish meal), reducing the introduction of soybean meal from 18.9% to 7.7% for chickens aged 1-3 weeks, and reducing the cost of 1 ton of feed by 923 UAH; for chickens aged 4-5 weeks - from 15.4% to 6-11% and reducing the cost of 1 ton of feed by 631-720 UAH. The optimal rates of introducing products of deep processing of corn grain into the diet of broiler chickens are from 2 to 8% without reducing the quality of the feed, which gives a significant economic effect in the production of livestock products.
- 12 October 2026
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 20 (3) , 201-211
EFFICIENCY OF USING PRODUCTS OF DEEP PROCESSING OF CORN GRAIN IN THE PRODUCTION OF LIVESTOCK PRODUCTS
Ukraine has basic production capacities in the field of deep corn processing, including enterprises for the production of starch, corn gluten and feed components. At the same time, the domestic market remains insufficiently diversified compared to leading international companies such as Cargill, Archer Daniels Midland or Ingredion Incorporated. These corporations are characterized by a high level of vertical integration and a wide range of products. The key difference is that international companies are focused on deep diversification and the production of high-value-added ingredients, while in Ukraine the sector is still focused mainly on basic processed products or on corn exports. Deep processing is very promising for Ukraine, as the country has a wide and diverse raw material base for the production of products with high added value. Deep processing makes it possible to eliminate the problem of delivering agricultural products abroad and increases the profit per ton of grain. The difference in the cost of corn grain and processed products is more than 100 euros per ton. The characteristics of deep-processed corn products and their uses are given. Recommendations for introducing deep-processed corn products into compound feeds are summarized, according to which the use of 5–10% concentrates, bran and DDGS in starter feeds for poultry and piglets is recommended. For adult animals, it can be increased to 15–20% in the diet. Control of nutrient balance - when introducing products with a high protein or energy content, it is necessary to adjust Ca:P, lysine, methionine. The use of starch production by-products allows replacing more expensive feed components (soybean meal, fish meal), reducing the introduction of soybean meal from 18.9% to 7.7% for chickens aged 1-3 weeks, and reducing the cost of 1 ton of feed by 923 UAH; for chickens aged 4-5 weeks - from 15.4% to 6-11% and reducing the cost of 1 ton of feed by 631-720 UAH. The optimal rates of introducing products of deep processing of corn grain into the diet of broiler chickens are from 2 to 8% without reducing the quality of the feed, which gives a significant economic effect in the production of livestock products.
- Open Access
- 23 September 2026
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 26 (3) , 27-35
SYSTEM OF TECHNOLOGICAL SOLUTIONS FOR DEVELOPING COMPOUND FEED FORMULAS FOR PIGS AND ASSESSING THEIR QUALITY
The aim of the study was to substantiate the feasibility of using an extruded feed additive based on corn and corn dried distillers grains with solubles (DDGS) in complete compound feeds for pigs during the bacon-fattening period, to develop optimized feed formulations for different fattening stages, and to evaluate their nutritional value, physical and technological properties, and economic efficiency. The study was conducted at the Department of Grain and Feed Technology of Odesa National University of Technology. The formulation of complete compound feeds was carried out using specialized software and the linear optimization method. Optimization was performed taking into account the nutritional value and cost of feed ingredients, their permissible inclusion levels, and the nutrient requirements of pigs. Feed formulations were developed for two stages of bacon fattening: at live weights of 40–70 and 71–110 kg. For each stage, feed variants with and without the extruded feed additive were developed. The experimental samples were evaluated for physical and technological properties, including moisture content, bulk density, flowability, and angle of repose, as well as for chemical and amino acid composition. The contents of crude protein, crude fat, crude fiber, calcium, phosphorus, lysine, methionine plus cystine, threonine, and tryptophan were determined. Economic efficiency was assessed based on changes in the cost of the developed feed formulations. Based on the optimization calculations, complete compound feed formulations for pigs during bacon fattening were developed, taking into account the established nutritional requirements and restrictions on the inclusion levels of individual ingredients. It was established that the inclusion of 20% of the extruded feed additive based on corn and corn DDGS makes it possible to partially replace conventional feed ingredients, particularly soybean meal, barley, and corn, without compromising the nutritional value of the feed. The use of the additive in compound feed for pigs during the first fattening period reduced the formulation cost by UAH 225/t, whereas during the second period the saving amounted to approximately UAH 190/t. The investigated compound feeds demonstrated satisfactory physical and technological properties and complied with the applicable standard requirements. Analysis of the chemical and amino acid composition confirmed an adequate balance of the developed formulations in terms of the main nutrients and essential amino acids. A technological approach to the development of complete compound feed formulations for pigs is proposed, combining preliminary extrusion processing of a corn and corn DDGS mixture with subsequent linear optimization of the compound feed composition. The possibility of using the resulting extruded feed additive as a component of optimized diets without reducing their nutritional value and with a simultaneous decrease in feed cost was established. The developed formulations can be used in the production of complete compound feeds for pigs during bacon fattening. The use of the extruded feed additive contributes to the rational utilization of a by-product of alcohol production, partial replacement of conventional protein and grain feed ingredients, and reduction of compound feed production costs. The proposed approach can be adapted to the actual cost and nutritional characteristics of feed ingredients at a particular enterprise.
- 23 September 2026
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 26 (3) , 27-35
Open AccessSYSTEM OF TECHNOLOGICAL SOLUTIONS FOR DEVELOPING COMPOUND FEED FORMULAS FOR PIGS AND ASSESSING THEIR QUALITY
The aim of the study was to substantiate the feasibility of using an extruded feed additive based on corn and corn dried distillers grains with solubles (DDGS) in complete compound feeds for pigs during the bacon-fattening period, to develop optimized feed formulations for different fattening stages, and to evaluate their nutritional value, physical and technological properties, and economic efficiency. The study was conducted at the Department of Grain and Feed Technology of Odesa National University of Technology. The formulation of complete compound feeds was carried out using specialized software and the linear optimization method. Optimization was performed taking into account the nutritional value and cost of feed ingredients, their permissible inclusion levels, and the nutrient requirements of pigs. Feed formulations were developed for two stages of bacon fattening: at live weights of 40–70 and 71–110 kg. For each stage, feed variants with and without the extruded feed additive were developed. The experimental samples were evaluated for physical and technological properties, including moisture content, bulk density, flowability, and angle of repose, as well as for chemical and amino acid composition. The contents of crude protein, crude fat, crude fiber, calcium, phosphorus, lysine, methionine plus cystine, threonine, and tryptophan were determined. Economic efficiency was assessed based on changes in the cost of the developed feed formulations. Based on the optimization calculations, complete compound feed formulations for pigs during bacon fattening were developed, taking into account the established nutritional requirements and restrictions on the inclusion levels of individual ingredients. It was established that the inclusion of 20% of the extruded feed additive based on corn and corn DDGS makes it possible to partially replace conventional feed ingredients, particularly soybean meal, barley, and corn, without compromising the nutritional value of the feed. The use of the additive in compound feed for pigs during the first fattening period reduced the formulation cost by UAH 225/t, whereas during the second period the saving amounted to approximately UAH 190/t. The investigated compound feeds demonstrated satisfactory physical and technological properties and complied with the applicable standard requirements. Analysis of the chemical and amino acid composition confirmed an adequate balance of the developed formulations in terms of the main nutrients and essential amino acids. A technological approach to the development of complete compound feed formulations for pigs is proposed, combining preliminary extrusion processing of a corn and corn DDGS mixture with subsequent linear optimization of the compound feed composition. The possibility of using the resulting extruded feed additive as a component of optimized diets without reducing their nutritional value and with a simultaneous decrease in feed cost was established. The developed formulations can be used in the production of complete compound feeds for pigs during bacon fattening. The use of the extruded feed additive contributes to the rational utilization of a by-product of alcohol production, partial replacement of conventional protein and grain feed ingredients, and reduction of compound feed production costs. The proposed approach can be adapted to the actual cost and nutritional characteristics of feed ingredients at a particular enterprise.
- 1 June 2026
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 26 (2) , 34-42
FEED ADDITIVE BASED ON DISTILLERY STILLAGE FOR PIG DIETS
The study addresses the scientific and practical problem of improving the efficiency of using distillers dried grains with solubles (DDGS) in pig nutrition through technological processing. The relevance of the research is driven by the need to reduce feed costs, enhance nutrient utilization, and expand the use of by-products of the ethanol industry under conditions of limited traditional feed resources. The aim of the study was to investigate the feasibility of using dried DDGS in compound feeds for pigs and to develop a technological method for producing an extruded feed additive based on corn DDGS. A comprehensive literature review was conducted to summarize current approaches to pig diet formulation and the use of DDGS as an alternative feed ingredient. Experimental studies included the determination of physicochemical and functional properties of DDGS obtained from different cereal crops (corn, wheat, barley, and rye), as well as the evaluation of mixtures of corn and corn DDGS before and after extrusion processing. Nutritional value was assessed based on moisture, crude protein, crude fat, crude fiber, ash, mineral content, and amino acid composition. The results demonstrated that corn DDGS has the highest energy value, protein content, and the most balanced amino acid profile compared to other types. Mixtures of corn and DDGS in ratios of 75:25, 80:20, and 85:15 were tested, and the 80:20 ratio was identified as optimal due to stable extrusion performance and favorable nutritional characteristics. Extrusion processing significantly improved feed quality by increasing protein and starch digestibility, reducing antinutritional factors, enhancing hygienic safety, and improving physical properties such as bulk density and flowability. The developed extruded feed additive showed satisfactory physicochemical characteristics and can be effectively used in pig diets. The 1% premix recipes for pigs in the production of complete feed using dried lamb grain, The findings confirm that extrusion is a promising method for improving the feeding value of DDGS and increasing the efficiency of compound feed production. The use of DDGS contributes to resource efficiency, waste utilization, and sustainable development of the feed industry
- 1 June 2026
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 26 (2) , 34-42
FEED ADDITIVE BASED ON DISTILLERY STILLAGE FOR PIG DIETS
The study addresses the scientific and practical problem of improving the efficiency of using distillers dried grains with solubles (DDGS) in pig nutrition through technological processing. The relevance of the research is driven by the need to reduce feed costs, enhance nutrient utilization, and expand the use of by-products of the ethanol industry under conditions of limited traditional feed resources. The aim of the study was to investigate the feasibility of using dried DDGS in compound feeds for pigs and to develop a technological method for producing an extruded feed additive based on corn DDGS. A comprehensive literature review was conducted to summarize current approaches to pig diet formulation and the use of DDGS as an alternative feed ingredient. Experimental studies included the determination of physicochemical and functional properties of DDGS obtained from different cereal crops (corn, wheat, barley, and rye), as well as the evaluation of mixtures of corn and corn DDGS before and after extrusion processing. Nutritional value was assessed based on moisture, crude protein, crude fat, crude fiber, ash, mineral content, and amino acid composition. The results demonstrated that corn DDGS has the highest energy value, protein content, and the most balanced amino acid profile compared to other types. Mixtures of corn and DDGS in ratios of 75:25, 80:20, and 85:15 were tested, and the 80:20 ratio was identified as optimal due to stable extrusion performance and favorable nutritional characteristics. Extrusion processing significantly improved feed quality by increasing protein and starch digestibility, reducing antinutritional factors, enhancing hygienic safety, and improving physical properties such as bulk density and flowability. The developed extruded feed additive showed satisfactory physicochemical characteristics and can be effectively used in pig diets. The 1% premix recipes for pigs in the production of complete feed using dried lamb grain, The findings confirm that extrusion is a promising method for improving the feeding value of DDGS and increasing the efficiency of compound feed production. The use of DDGS contributes to resource efficiency, waste utilization, and sustainable development of the feed industry
- Open Access
- 10 April 2026
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 26 (1) , 2.3-30
DISTILLERS’ GRAINS – A POWERFUL COMPONENTIN ENHANCING PIG FARMING PROFITABILITY
Pig farming is one of the key and strategically important branches of livestock production, playing a crucial role in ensuring food security, economic stability, and rural development. In Ukraine, pork remains one of the most consumed types of meat due to its high nutritional value, digestibility, and versatility in processing. However, the pig farming sector currently operates under conditions of significant structural transformation caused by epizootic threats, rising production costs, market volatility, and the consequences of military actions. Under these circumstances, feed efficiency and cost optimization become decisive factors determining the competitiveness and sustainability of pork production. Since feed costs account for up to 70% of total production expenses, the modernization of the feed base and the introduction of alternative nutrient sources are of particular importance. This article substantiates the feasibility of using dried distillers’ grains with solubles (DDGS), a byproduct of bioethanol and alcohol production, as a valuable component of compound feeds for pigs. DDGS is characterized by a high content of crude protein, metabolizable energy, available phosphorus, B-group vitamins, and residual yeast biomass, which makes it a promising substitute for conventional protein ingredients such as soybean meal. The effectiveness of DDGS use depends on its botanical origin, production technology, processing methods, and inclusion rates in diets. Special attention is given to technological approaches such as drying and extrusion, which improve nutrient availability, reduce anti-nutritional factors, lower microbial contamination, and extend shelf life. The study analyzes global and national trends in compound feed production, identifies key challenges affecting the Ukrainian feed and pig farming sectors, and evaluates the potential volumes of distillers’ grains generated by the domestic alcohol industry. Based on statistical data and analytical calculations, the potential volume of dried distillers’ grains suitable for feed manufacturing in Ukraine is estimated. It is shown that the rational integration of DDGS into pig diets at scientifically justified inclusion levels can significantly reduce feed costs, improve feed conversion efficiency, and enhance overall production profitability. In addition to economic benefits, the utilization of DDGS contributes to solving environmental issues related to the disposal of alcohol production by-products and supports the principles of circular economy and resource-efficient agriculture. The results confirm that the use of dried distillers’ grains in compound feeds for pigs is a technologically sound, economically viable, and environmentally responsible solution that can strengthen the resilience of pig farming and feed manufacturing in Ukraine under current and post-crisis conditions.
- 10 April 2026
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 26 (1) , 2.3-30
Open AccessDISTILLERS’ GRAINS – A POWERFUL COMPONENTIN ENHANCING PIG FARMING PROFITABILITY
Pig farming is one of the key and strategically important branches of livestock production, playing a crucial role in ensuring food security, economic stability, and rural development. In Ukraine, pork remains one of the most consumed types of meat due to its high nutritional value, digestibility, and versatility in processing. However, the pig farming sector currently operates under conditions of significant structural transformation caused by epizootic threats, rising production costs, market volatility, and the consequences of military actions. Under these circumstances, feed efficiency and cost optimization become decisive factors determining the competitiveness and sustainability of pork production. Since feed costs account for up to 70% of total production expenses, the modernization of the feed base and the introduction of alternative nutrient sources are of particular importance. This article substantiates the feasibility of using dried distillers’ grains with solubles (DDGS), a byproduct of bioethanol and alcohol production, as a valuable component of compound feeds for pigs. DDGS is characterized by a high content of crude protein, metabolizable energy, available phosphorus, B-group vitamins, and residual yeast biomass, which makes it a promising substitute for conventional protein ingredients such as soybean meal. The effectiveness of DDGS use depends on its botanical origin, production technology, processing methods, and inclusion rates in diets. Special attention is given to technological approaches such as drying and extrusion, which improve nutrient availability, reduce anti-nutritional factors, lower microbial contamination, and extend shelf life. The study analyzes global and national trends in compound feed production, identifies key challenges affecting the Ukrainian feed and pig farming sectors, and evaluates the potential volumes of distillers’ grains generated by the domestic alcohol industry. Based on statistical data and analytical calculations, the potential volume of dried distillers’ grains suitable for feed manufacturing in Ukraine is estimated. It is shown that the rational integration of DDGS into pig diets at scientifically justified inclusion levels can significantly reduce feed costs, improve feed conversion efficiency, and enhance overall production profitability. In addition to economic benefits, the utilization of DDGS contributes to solving environmental issues related to the disposal of alcohol production by-products and supports the principles of circular economy and resource-efficient agriculture. The results confirm that the use of dried distillers’ grains in compound feeds for pigs is a technologically sound, economically viable, and environmentally responsible solution that can strengthen the resilience of pig farming and feed manufacturing in Ukraine under current and post-crisis conditions.
- 29 December 2025
- Published by Odesa National University of Technology in Scientific Works
- Vol. 89 (2) , 112-120
ПРАКТИКА ОПТИМІЗАЦІЇ ВИРОБНИЦТВА ПРЕМІКСІВ І КОМБІКОРМІВ
В матеріалах статті розглянуті теоретичні та практичні питання розрахунку рецептів комбікормової продукції. Проведено аналіз основних проблем, які виникають при виборі кормової сировини та відповідності готових рецептів для сільськогосподарської птиці за показниками поживності нормативній документації. Розглянуто проблеми оптимізації виробництва преміксів і комбікормів та їх вплив на якість комбікормової продукції. Встановлено, що впровадження автоматизованих систем управління технологічними процесами, математичного моделювання рецептур та методів оптимального планування дозволяє підвищити ефективність виробництва комбікормів на 10–20 %. Наведено ТОП 20 програмних комплексів для розрахунку рецептів преміксів та комбікормів. Наведені основні бази поживності сировини ТОП 20 у розрізі країни/організації та їх особливості. Доведено, що застосування оптимізаційних алгоритмів у поєднанні з комп’ютерними системами управління дозволяє підвищити ефективність використання кормових ресурсів і зменшити перевитрати мікроінгредієнтів. На ТОВ «Мега Корм» за допомогою програмних комплексів Bestmix (Бельгія (Adifo/Info Support)) та KormOptima (Україна) розраховано рецепти преміксів та повнораціонних комбікормів для курчат бройлерів віком до 10 діб. Встановлено, що включення до складу преміксів і комбікормів специфічних нутрієнтів кальцію аскорбату, ферментних препаратів Ветозим мульті та Ветозим ФФ-10000 дозволило зменшити вміст у складі рецептів шроту соєвого на 7,2%, олії соняшникової на 50% та монокальційфосфату на 60% при дотриманні вимог до поживності комбікорму. Надані практичні рішення для оптимізації рецептур комбікормів з урахуванням рівня конверсії корму (FCR). При розрахунку вартісних показників встановлено економічний ефект використання ферментних препаратів, собівартість 1 тони готової продукції зменшилась на 992 грн. (7,7%). Отже оптимізація рецептів комбікормів має практичне значення та спрямована на підвищення конкурентоспроможності підприємств комбікормової галузі.
- 29 December 2025
- Published by Odesa National University of Technology in Scientific Works
- Vol. 89 (2) , 112-120
ПРАКТИКА ОПТИМІЗАЦІЇ ВИРОБНИЦТВА ПРЕМІКСІВ І КОМБІКОРМІВ
В матеріалах статті розглянуті теоретичні та практичні питання розрахунку рецептів комбікормової продукції. Проведено аналіз основних проблем, які виникають при виборі кормової сировини та відповідності готових рецептів для сільськогосподарської птиці за показниками поживності нормативній документації. Розглянуто проблеми оптимізації виробництва преміксів і комбікормів та їх вплив на якість комбікормової продукції. Встановлено, що впровадження автоматизованих систем управління технологічними процесами, математичного моделювання рецептур та методів оптимального планування дозволяє підвищити ефективність виробництва комбікормів на 10–20 %. Наведено ТОП 20 програмних комплексів для розрахунку рецептів преміксів та комбікормів. Наведені основні бази поживності сировини ТОП 20 у розрізі країни/організації та їх особливості. Доведено, що застосування оптимізаційних алгоритмів у поєднанні з комп’ютерними системами управління дозволяє підвищити ефективність використання кормових ресурсів і зменшити перевитрати мікроінгредієнтів. На ТОВ «Мега Корм» за допомогою програмних комплексів Bestmix (Бельгія (Adifo/Info Support)) та KormOptima (Україна) розраховано рецепти преміксів та повнораціонних комбікормів для курчат бройлерів віком до 10 діб. Встановлено, що включення до складу преміксів і комбікормів специфічних нутрієнтів кальцію аскорбату, ферментних препаратів Ветозим мульті та Ветозим ФФ-10000 дозволило зменшити вміст у складі рецептів шроту соєвого на 7,2%, олії соняшникової на 50% та монокальційфосфату на 60% при дотриманні вимог до поживності комбікорму. Надані практичні рішення для оптимізації рецептур комбікормів з урахуванням рівня конверсії корму (FCR). При розрахунку вартісних показників встановлено економічний ефект використання ферментних препаратів, собівартість 1 тони готової продукції зменшилась на 992 грн. (7,7%). Отже оптимізація рецептів комбікормів має практичне значення та спрямована на підвищення конкурентоспроможності підприємств комбікормової галузі.
- 5 June 2025
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 25 (2) , 25-32
A SYSTEMATIC APPROACH TO OPTIMIZING POULTRY FEED FORMULATIONS USING AMARANTH: TECHNOLOGICAL AND QUALITY ASPECTS
The article presents the results of a systematic approach to optimizing poultry feed formulations using amaranth—a highprotein, nutritious, and promising crop. In the face of challenges brought about by military actions affecting Ukraine’s agricultural sector, the efficient use of resources and reduction of livestock production costs have become particularly relevant. One possible way to improve the feed base is to incorporate alternative protein components into compound feeds, particularly amaranth press cake, which possesses antimicrobial properties and high digestibility. The aim of the study was to develop balanced starter compound feeds for different types of poultry (broilers, ducks, and laying hens) using amaranth press cake. To achieve this goal, the physicochemical properties of the main ingredients (amaranth, soybean, sunflower, and amaranth press cakes) were determined, optimized feed formulations were developed using specialized software, and laboratory samples of the compound feeds were produced. Their physical properties (moisture content, bulk density, flowability, angle of repose) and chemical composition (protein, fat, fiber, macroelements, and amino acid content) were assessed. The results indicate that amaranth press cake has suitable physicochemical properties for use in compound feed production and contains a significant amount of lysine, arginine, threonine, and other essential amino acids. Compared to soybean and sunflower press cakes, amaranth has a lower protein content but offers advantages in terms of cost, availability, and environmental sustainability of cultivation. The developed formulations comply with feeding standards for the respective poultry groups, ensure balanced nutrition, and can serve as an effective alternative to traditional protein sources. Thus, the use of amaranth press cake as a component of poultry feed not only enhances the economic efficiency of production but also contributes to the greening of livestock farming and the improvement of product quality under conditions of reduced or complete elimination of antibiotics in feeding.
- 5 June 2025
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 25 (2) , 25-32
A SYSTEMATIC APPROACH TO OPTIMIZING POULTRY FEED FORMULATIONS USING AMARANTH: TECHNOLOGICAL AND QUALITY ASPECTS
The article presents the results of a systematic approach to optimizing poultry feed formulations using amaranth—a highprotein, nutritious, and promising crop. In the face of challenges brought about by military actions affecting Ukraine’s agricultural sector, the efficient use of resources and reduction of livestock production costs have become particularly relevant. One possible way to improve the feed base is to incorporate alternative protein components into compound feeds, particularly amaranth press cake, which possesses antimicrobial properties and high digestibility. The aim of the study was to develop balanced starter compound feeds for different types of poultry (broilers, ducks, and laying hens) using amaranth press cake. To achieve this goal, the physicochemical properties of the main ingredients (amaranth, soybean, sunflower, and amaranth press cakes) were determined, optimized feed formulations were developed using specialized software, and laboratory samples of the compound feeds were produced. Their physical properties (moisture content, bulk density, flowability, angle of repose) and chemical composition (protein, fat, fiber, macroelements, and amino acid content) were assessed. The results indicate that amaranth press cake has suitable physicochemical properties for use in compound feed production and contains a significant amount of lysine, arginine, threonine, and other essential amino acids. Compared to soybean and sunflower press cakes, amaranth has a lower protein content but offers advantages in terms of cost, availability, and environmental sustainability of cultivation. The developed formulations comply with feeding standards for the respective poultry groups, ensure balanced nutrition, and can serve as an effective alternative to traditional protein sources. Thus, the use of amaranth press cake as a component of poultry feed not only enhances the economic efficiency of production but also contributes to the greening of livestock farming and the improvement of product quality under conditions of reduced or complete elimination of antibiotics in feeding.
- 11 March 2025
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 25 (1) , 41-46
PROSPECTS FOR THE USE OF AMARANTH AND ITS PROCESSING PRODUCTS IN THE COMPOSITION OF COMPOUND FEED FOR POULTRY
It has been established that the efficiency of livestock farming largely depends on the quality of compound feeds, as they account for up to 70% of the production cost structure. The primary raw material sources for compound feeds include grains, legumes, oilseeds, and their by-products (meal and cake). Yield instability, dependence on weather conditions, fluctuations in agricultural product prices, and increasing competition in the raw material market complicate the ability of compound feed enterprises to secure the necessary resources. The positive dynamics of global compound feed production volumes from 2018 to 2023 are presented. Changes in the volumes of compound feed production in Ukraine from 2019 to 2023 have been summarized. It has been proven that the state of the compound feed industry in Ukraine has undergone significant changes due to the impact of military actions, economic challenges, and disrupted logistics chains during the war. The main trends identified include a reduction in production, increased production costs, and a decline in product quality. An analysis of the distribution of compound feed production volumes in Ukraine in 2023 by types of agricultural animals and poultry shows that the largest share is occupied by the production of compound feed for poultry. This is due to the efficiency of poultry farming, industrialization of production, and accessibility of technologies. It has been proven that global grain reserves have significantly declined over the past 10 years, reaching their lowest level during this period. The dependence of domestic feed production on grain crops results in high sensitivity of livestock, poultry, and aquaculture sectors to factors such as weather conditions, crop yields, economic interests in land use, food market dynamics, and the country’s import policies. This issue is further exacerbated by the challenge of protein supply for livestock farming. It has been demonstrated that amaranth can partially address the protein supply issue and reduce dependence on grains in poultry feed production. In the compound feed industry, the use of amaranth seeds is justified by their high protein, amino acid, trace element, and biologically active compound content. In Ukraine, amaranth is actively processed for various industries, with oil being the most common product. It has been established that the cost of amaranth may be higher than traditional components, limiting its use in budget feeds. The market price ranges from 20,000 to 25,000 UAH/ton. The feasibility of using amaranth cake in compound feeds has been substantiated. Amaranth cake is a by-product obtained after pressing oil from amaranth seeds. It is used in compound feed production, improving animal immunity and ensuring better nutrient absorption. Amaranth cake significantly surpasses traditional grains in nutritional value. Its use reduces dependence on other protein components and enables the creation of next-generation compound feeds.
- 11 March 2025
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 25 (1) , 41-46
PROSPECTS FOR THE USE OF AMARANTH AND ITS PROCESSING PRODUCTS IN THE COMPOSITION OF COMPOUND FEED FOR POULTRY
It has been established that the efficiency of livestock farming largely depends on the quality of compound feeds, as they account for up to 70% of the production cost structure. The primary raw material sources for compound feeds include grains, legumes, oilseeds, and their by-products (meal and cake). Yield instability, dependence on weather conditions, fluctuations in agricultural product prices, and increasing competition in the raw material market complicate the ability of compound feed enterprises to secure the necessary resources. The positive dynamics of global compound feed production volumes from 2018 to 2023 are presented. Changes in the volumes of compound feed production in Ukraine from 2019 to 2023 have been summarized. It has been proven that the state of the compound feed industry in Ukraine has undergone significant changes due to the impact of military actions, economic challenges, and disrupted logistics chains during the war. The main trends identified include a reduction in production, increased production costs, and a decline in product quality. An analysis of the distribution of compound feed production volumes in Ukraine in 2023 by types of agricultural animals and poultry shows that the largest share is occupied by the production of compound feed for poultry. This is due to the efficiency of poultry farming, industrialization of production, and accessibility of technologies. It has been proven that global grain reserves have significantly declined over the past 10 years, reaching their lowest level during this period. The dependence of domestic feed production on grain crops results in high sensitivity of livestock, poultry, and aquaculture sectors to factors such as weather conditions, crop yields, economic interests in land use, food market dynamics, and the country’s import policies. This issue is further exacerbated by the challenge of protein supply for livestock farming. It has been demonstrated that amaranth can partially address the protein supply issue and reduce dependence on grains in poultry feed production. In the compound feed industry, the use of amaranth seeds is justified by their high protein, amino acid, trace element, and biologically active compound content. In Ukraine, amaranth is actively processed for various industries, with oil being the most common product. It has been established that the cost of amaranth may be higher than traditional components, limiting its use in budget feeds. The market price ranges from 20,000 to 25,000 UAH/ton. The feasibility of using amaranth cake in compound feeds has been substantiated. Amaranth cake is a by-product obtained after pressing oil from amaranth seeds. It is used in compound feed production, improving animal immunity and ensuring better nutrient absorption. Amaranth cake significantly surpasses traditional grains in nutritional value. Its use reduces dependence on other protein components and enables the creation of next-generation compound feeds.
- 29 October 2024
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 24 (3) , 21-26
LUPINE IS A PROMISING LEGUME CROP FOR COMPOUND FEED PRODUCTION
It has been established that food security is an essential component of the overall national security of every country, as it is recognized as a necessary condition and prerequisite for the social and economic stability of the state. Food plays a vital role in human life. Feed production acts as an intermediate link in the production chain, encompassing raw material suppliers (agricultural enterprises, farms), processors (feed mills), and consumers (poultry and livestock complexes). Thus, the feed industry is a key link in providing the population with meat products. Under conditions of war and other market changes, the dynamics of the feed market in Ukraine are undergoing significant transformations. The dynamics of changes in feed production volumes by animal species in Ukraine since 2013 have been presented. It has been established that the leader in feed production is Myronivsky Hliboproduct (MHP), which produces one-third of the total volume. The main global challenges faced by the feed production sector during the fullscale war in Ukraine have been highlighted, including disruptions in logistics for raw material supply, resources, and product distribution; shortages and high costs of energy resources; labor shortages due to mass emigration and employee mobilization; reduction in workforce; and an unstable market. The top 10 agro-industrial companies in Ukraine that earned nearly 90 billion UAH in 2023 (according to the Opentadatabot Index) have been listed. Changes in the production volumes of feed crops in Ukraine from 2019 to 2023 have been presented. According to Forbes, grain production in Ukraine in 2023 decreased by 7.9% compared to 2022. It has been substantiated that the search for new types of protein grain raw materials contributes to the diversification of protein sources and can support the stability of feed production amid full-scale war, changing market conditions, yields, and other factors. Lupin can be an important component in agricultural production systems, as its high protein content can expand protein sources for feed and other products. Regarding the use of lupin in animal feed, its protein contains all essential amino acids, making it appealing for animal nutrition. Most types of lupin are rich in fiber and other beneficial components such as oils, antioxidants, and vitamins. Lupin oil is a valuable product as it contains significant amounts of fat-soluble vitamins and provitamins, such as tocopherols (vitamin E), sterols, and carotenoids. This oil's distinctive feature is its high content of essential linoleic and linolenic acids. Statistics on global and Ukrainian lupin production reflect data only for seed production, with the average global seed yield in 2019 being 11.4 centners per hectare, while in Ukraine, a higher yield of 14.0 centners per hectare was noted. Ukraine does not import lupin seeds but actively exports them. In 2020, lupin exports amounted to 4.2 thousand tons worth $1.4 million, approximately half of Ukraine's production. The main importing countries were the Netherlands and Poland. Ukraine ranks 9th in the world in terms of lupin production.
- 29 October 2024
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 24 (3) , 21-26
LUPINE IS A PROMISING LEGUME CROP FOR COMPOUND FEED PRODUCTION
It has been established that food security is an essential component of the overall national security of every country, as it is recognized as a necessary condition and prerequisite for the social and economic stability of the state. Food plays a vital role in human life. Feed production acts as an intermediate link in the production chain, encompassing raw material suppliers (agricultural enterprises, farms), processors (feed mills), and consumers (poultry and livestock complexes). Thus, the feed industry is a key link in providing the population with meat products. Under conditions of war and other market changes, the dynamics of the feed market in Ukraine are undergoing significant transformations. The dynamics of changes in feed production volumes by animal species in Ukraine since 2013 have been presented. It has been established that the leader in feed production is Myronivsky Hliboproduct (MHP), which produces one-third of the total volume. The main global challenges faced by the feed production sector during the fullscale war in Ukraine have been highlighted, including disruptions in logistics for raw material supply, resources, and product distribution; shortages and high costs of energy resources; labor shortages due to mass emigration and employee mobilization; reduction in workforce; and an unstable market. The top 10 agro-industrial companies in Ukraine that earned nearly 90 billion UAH in 2023 (according to the Opentadatabot Index) have been listed. Changes in the production volumes of feed crops in Ukraine from 2019 to 2023 have been presented. According to Forbes, grain production in Ukraine in 2023 decreased by 7.9% compared to 2022. It has been substantiated that the search for new types of protein grain raw materials contributes to the diversification of protein sources and can support the stability of feed production amid full-scale war, changing market conditions, yields, and other factors. Lupin can be an important component in agricultural production systems, as its high protein content can expand protein sources for feed and other products. Regarding the use of lupin in animal feed, its protein contains all essential amino acids, making it appealing for animal nutrition. Most types of lupin are rich in fiber and other beneficial components such as oils, antioxidants, and vitamins. Lupin oil is a valuable product as it contains significant amounts of fat-soluble vitamins and provitamins, such as tocopherols (vitamin E), sterols, and carotenoids. This oil's distinctive feature is its high content of essential linoleic and linolenic acids. Statistics on global and Ukrainian lupin production reflect data only for seed production, with the average global seed yield in 2019 being 11.4 centners per hectare, while in Ukraine, a higher yield of 14.0 centners per hectare was noted. Ukraine does not import lupin seeds but actively exports them. In 2020, lupin exports amounted to 4.2 thousand tons worth $1.4 million, approximately half of Ukraine's production. The main importing countries were the Netherlands and Poland. Ukraine ranks 9th in the world in terms of lupin production.
- 15 September 2024
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 23 (3) , 6-14
OPTIMIZATION OF THE FATTY ACID COMPOSITION OF FEED PRODUCTS. PROBLEMS AND PERSPECTIVES
Modern trends and changes in the production of food and feed products, the state of natural resource provision for mankind, physiological features of modern high-performance breeds of animals and poultry crosses, features of their maintenance, the structure of the raw material base of the compound feed industry, and the need to change approaches to providing compound feed products with fat have been analyzed. It is shown that the limitation of the introduction of fish and meat and bone meal in compound feed recipes requires the replacement of these components not only from the point of view of protein quality, but also the need to adjust fat both in quantity to ensure the required level of energy value and in quality to ensure healthy life activity of the body. It has been shown that the organism of animals and birds is a symbiosis of two organisms, a macroorganism and a microbiota, with a significant contribution to the coexistence of microbiota, therefore the justification of the choice of components of compound feed products, in particular to provide fat and energy, should be carried out taking into account the further impact on the microbe. The relevance of optimizing the fatty acid composition (FAС) of compound feed products according to the physiological and metabolic needs of modern breeds and crosses of agricultural animals and poultry is shown. Modern ideas about the ways of fat metabolism, the physiological role of individual fatty acids, biological value were analyzed, and the theoretical principles of optimizing the fatty acid composition were developed. It has been established that saturated fatty acids are more resistant to oxidation, able to increase immunity, reduce inflammation, but have a low degree of assimilation, and require mandatory adjustment of bioavailability to avoid disruption of lipid metabolism. Monounsaturated fatty acids have better resistance to oxidative processes, higher availability. Polyunsaturated fatty acids (PUFAs) have low and very low resistance to oxidative processes, which makes it necessary to solve the issue of their stabilization both in vivo and in vitro, since the accumulation of toxic products of lipid peroxidation initiates the appearance of various pathologies and diseases. The nutritional value of pressed and unrefined sunflower oil, soybean oil, high-oleic sunflower oil, palm oil, coconut oil, and linseed oil were determined; of veterinary fish oil and the ratio of ?-6 and ?-3 PUFAs was calculated in them, the advantages and disadvantages of their use in compound feed were substantiated. It is shown that the introduction of sunflower oil of the linoleic type to provide feed with energy leads to a significant increase in the content of linoleic acid, which is related to the structure of the raw material base and the significant content of ?-6 PUFA in other feed products. Compound feed recipes for different species and groups of poultry were calculated, and it was established that when using fish and meat and bone meal, the content of linoleic acid in compound feed was exceeded by 3 times (up to 3.08% against the norm of 1.1%). Additional introduction of oil of sunflower linoleic type leads to an increase in the indicator for various recipes and species and groups from 3.0 to 5 times, which leads to a violation of lipid and mineral metabolism, the appearance of pathological conditions, a decrease in the productivity of animals and poultry, obtaining low-quality livestock and poultry products. The nutritional value of compound feed products will allow to correct the pathways of lipid metabolism and biosynthesis, to carry out the predicted physiological and functional effect on the body of farm animals and poultry in order to obtain livestock and poultry products of maximum quantity and high quality. Further research is needed to justify the choice of fats and fat-containing feed additives, to improve the calculation recipes of compound feed products, taking into account the optimization of both fat and fatty acid profile.
- 15 September 2024
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 23 (3) , 6-14
OPTIMIZATION OF THE FATTY ACID COMPOSITION OF FEED PRODUCTS. PROBLEMS AND PERSPECTIVES
Modern trends and changes in the production of food and feed products, the state of natural resource provision for mankind, physiological features of modern high-performance breeds of animals and poultry crosses, features of their maintenance, the structure of the raw material base of the compound feed industry, and the need to change approaches to providing compound feed products with fat have been analyzed. It is shown that the limitation of the introduction of fish and meat and bone meal in compound feed recipes requires the replacement of these components not only from the point of view of protein quality, but also the need to adjust fat both in quantity to ensure the required level of energy value and in quality to ensure healthy life activity of the body. It has been shown that the organism of animals and birds is a symbiosis of two organisms, a macroorganism and a microbiota, with a significant contribution to the coexistence of microbiota, therefore the justification of the choice of components of compound feed products, in particular to provide fat and energy, should be carried out taking into account the further impact on the microbe. The relevance of optimizing the fatty acid composition (FAС) of compound feed products according to the physiological and metabolic needs of modern breeds and crosses of agricultural animals and poultry is shown. Modern ideas about the ways of fat metabolism, the physiological role of individual fatty acids, biological value were analyzed, and the theoretical principles of optimizing the fatty acid composition were developed. It has been established that saturated fatty acids are more resistant to oxidation, able to increase immunity, reduce inflammation, but have a low degree of assimilation, and require mandatory adjustment of bioavailability to avoid disruption of lipid metabolism. Monounsaturated fatty acids have better resistance to oxidative processes, higher availability. Polyunsaturated fatty acids (PUFAs) have low and very low resistance to oxidative processes, which makes it necessary to solve the issue of their stabilization both in vivo and in vitro, since the accumulation of toxic products of lipid peroxidation initiates the appearance of various pathologies and diseases. The nutritional value of pressed and unrefined sunflower oil, soybean oil, high-oleic sunflower oil, palm oil, coconut oil, and linseed oil were determined; of veterinary fish oil and the ratio of ?-6 and ?-3 PUFAs was calculated in them, the advantages and disadvantages of their use in compound feed were substantiated. It is shown that the introduction of sunflower oil of the linoleic type to provide feed with energy leads to a significant increase in the content of linoleic acid, which is related to the structure of the raw material base and the significant content of ?-6 PUFA in other feed products. Compound feed recipes for different species and groups of poultry were calculated, and it was established that when using fish and meat and bone meal, the content of linoleic acid in compound feed was exceeded by 3 times (up to 3.08% against the norm of 1.1%). Additional introduction of oil of sunflower linoleic type leads to an increase in the indicator for various recipes and species and groups from 3.0 to 5 times, which leads to a violation of lipid and mineral metabolism, the appearance of pathological conditions, a decrease in the productivity of animals and poultry, obtaining low-quality livestock and poultry products. The nutritional value of compound feed products will allow to correct the pathways of lipid metabolism and biosynthesis, to carry out the predicted physiological and functional effect on the body of farm animals and poultry in order to obtain livestock and poultry products of maximum quantity and high quality. Further research is needed to justify the choice of fats and fat-containing feed additives, to improve the calculation recipes of compound feed products, taking into account the optimization of both fat and fatty acid profile.
- 12 June 2024
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 24 (2) , 33-38
ANALYSIS OF THE STATE OF THE POULTRY INDUSTRY AND HIDDEN OPPORTUNITIES
Today, both producers and consumers of fodders are aware that achieving high productivity of animals and poultry, as well as optimal quality of final products, is impossible without the use of complete and nutritionally balanced feed. Requirements for the quality of compound feeds continuously grow and change, as new, more productive animal breeds and poultry crosses appear. It is proved that the COVID-19 pandemic, the full-scale war in Ukraine, climate variability and the global economic crisis are seriously undermining efforts to fight hunger and improve food security and nutrition. In the countries of Europe and Central Asia, the number of people who face problems in accessing adequate nutrition, including quality and safe products, has increased by 25.5 million people. According to FAO estimates, by 2050 we will have to increase the production of food and animal protein, including by 60%, to provide food for the world's 9.3 billion people. It has been established that poultry products are the most common and available source of animal protein to meet the needs of the world's population. The dynamics of changes in the feed production volume in 2018-2023 according to the data of the annual Agri-Food Outlook are presented. The top 10 leading countries in the feed production in 2022 are listed. They consume 64% of the world's compound feed, and half of the world's compound feed consumption is concentrated in four countries (China, USA, Brazil and India). A comparative analysis of the structure of compound feed production by types of agricultural animals and poultry for 2021-2023 shows that there is a growth trend for almost all types. The production of compound feed for pigs has been negatively affected by ASF all over the world. The greatest growth is observed in the field of compound feed for pets. It has been proven that a third of consumers prefer poultry products due to their availability and quality. In Ukraine, the industry is developing rapidly even in the conditions of a full-scale war, personnel shortages, power outages, inflation and disruption of logistics chains. The volume of global poultry production from 2012 to 2023 is shown. It is constantly increasing, caused by the increase in demand for affordable and relatively cheap animal protein. As a result of the analysis of the dynamics of poultry meat production by country in 2022-2023, it was established that the USA remains the leader in the production of poultry meat in the world for many years. Brazil and China remain in second and third place. Brazil has the largest growth during the reporting period. High competition in the field of breeding of laying hens and broilers stimulates the development of niche industries, such as guinea fowl breeding. Guinea fowls are raised for meat, eggs and fluff. This can be a very profitable business, especially for small poultry farms, due to the speed of payback of small investments and the unpretentiousness of the bird
- 12 June 2024
- Published by Odesa National University of Technology in Grain Products and Mixed Fodder’s
- Vol. 24 (2) , 33-38
ANALYSIS OF THE STATE OF THE POULTRY INDUSTRY AND HIDDEN OPPORTUNITIES
Today, both producers and consumers of fodders are aware that achieving high productivity of animals and poultry, as well as optimal quality of final products, is impossible without the use of complete and nutritionally balanced feed. Requirements for the quality of compound feeds continuously grow and change, as new, more productive animal breeds and poultry crosses appear. It is proved that the COVID-19 pandemic, the full-scale war in Ukraine, climate variability and the global economic crisis are seriously undermining efforts to fight hunger and improve food security and nutrition. In the countries of Europe and Central Asia, the number of people who face problems in accessing adequate nutrition, including quality and safe products, has increased by 25.5 million people. According to FAO estimates, by 2050 we will have to increase the production of food and animal protein, including by 60%, to provide food for the world's 9.3 billion people. It has been established that poultry products are the most common and available source of animal protein to meet the needs of the world's population. The dynamics of changes in the feed production volume in 2018-2023 according to the data of the annual Agri-Food Outlook are presented. The top 10 leading countries in the feed production in 2022 are listed. They consume 64% of the world's compound feed, and half of the world's compound feed consumption is concentrated in four countries (China, USA, Brazil and India). A comparative analysis of the structure of compound feed production by types of agricultural animals and poultry for 2021-2023 shows that there is a growth trend for almost all types. The production of compound feed for pigs has been negatively affected by ASF all over the world. The greatest growth is observed in the field of compound feed for pets. It has been proven that a third of consumers prefer poultry products due to their availability and quality. In Ukraine, the industry is developing rapidly even in the conditions of a full-scale war, personnel shortages, power outages, inflation and disruption of logistics chains. The volume of global poultry production from 2012 to 2023 is shown. It is constantly increasing, caused by the increase in demand for affordable and relatively cheap animal protein. As a result of the analysis of the dynamics of poultry meat production by country in 2022-2023, it was established that the USA remains the leader in the production of poultry meat in the world for many years. Brazil and China remain in second and third place. Brazil has the largest growth during the reporting period. High competition in the field of breeding of laying hens and broilers stimulates the development of niche industries, such as guinea fowl breeding. Guinea fowls are raised for meat, eggs and fluff. This can be a very profitable business, especially for small poultry farms, due to the speed of payback of small investments and the unpretentiousness of the bird