Peng Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Peng Shi has a total of 187 co-authors. Here are the top co-authors by number of shared publications:
Wei Ren
81 shared publicationsXiaoqing Wu
Xi’an Jiaotong University Electronic Material Research Laboratory, Key Laboratory of the Ministry of Education & International Center for Dielectric Research Xi’an 710049, China
81 shared publicationsXi Yao
45 shared publicationsXiaofeng Chen
37 shared publications- Wei Ren
State Key Laboratory for Manufacturing Systems Engineering, Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education, School of Electronic Science and Engineering, Xi’an Jiaotong University, Xi’an 710049, China
23 shared publications - Zuo-Guang Ye
Department of Chemistry and 4D LABS, Simon Fraser University, Burnaby, British Columbia V5A 1S6, Canada
21 shared publications
Latest Publications
- 7 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (14) , 6044-6057
Enhanced Energy-Storage Performance of High-Entropy (1 − x )(NaBiBa)0.205(SrCa)0.1925TiO3- x Bi(Zn2/3Ta1/3)O3 Ceramic under Moderate Electric Field
Developing lead-free dielectric materials with superior energy-storage properties under medium electric fields is of critical significance for the advancement of compact pulsed-power electronics and wearable energy-storage devices. Herein, an optimization methodology integrating high-entropy engineering, bandgap modulation, and ion modification is proposed to design relaxor ferroelectric ceramics with (1−x)(NaBiBa)0.205(SrCa)0.1925TiO3−xBi(Zn2/3Ta1/3)O3 (shortened as NBBSCT-xBZT). Via collaborative A/B-site ion regulation, the as-prepared ceramics achieve optimized lattice distortion, enhanced breakdown strength, and pronounced relaxor characteristics. The optimized ceramic compositions exhibit exceptional energy-storage performances, while the 0.91 NBBSCT−0.09BZT sample achieves a superior Wrec of 5.42 J/cm3 and a comparably high η of 94.71% at 328 kV/cm. This work provides a feasible and effective strategy for designing high-performance lead-free dielectric specimens, offering a promising paradigm for their practical applications in moderate-voltage and flexible energy-storage fields.
- 7 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (14) , 6044-6057
Enhanced Energy-Storage Performance of High-Entropy (1 − x )(NaBiBa)0.205(SrCa)0.1925TiO3- x Bi(Zn2/3Ta1/3)O3 Ceramic under Moderate Electric Field
Developing lead-free dielectric materials with superior energy-storage properties under medium electric fields is of critical significance for the advancement of compact pulsed-power electronics and wearable energy-storage devices. Herein, an optimization methodology integrating high-entropy engineering, bandgap modulation, and ion modification is proposed to design relaxor ferroelectric ceramics with (1−x)(NaBiBa)0.205(SrCa)0.1925TiO3−xBi(Zn2/3Ta1/3)O3 (shortened as NBBSCT-xBZT). Via collaborative A/B-site ion regulation, the as-prepared ceramics achieve optimized lattice distortion, enhanced breakdown strength, and pronounced relaxor characteristics. The optimized ceramic compositions exhibit exceptional energy-storage performances, while the 0.91 NBBSCT−0.09BZT sample achieves a superior Wrec of 5.42 J/cm3 and a comparably high η of 94.71% at 328 kV/cm. This work provides a feasible and effective strategy for designing high-performance lead-free dielectric specimens, offering a promising paradigm for their practical applications in moderate-voltage and flexible energy-storage fields.
- 2 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (23) , 15973-15986
Monitoring the Mechanical and Electrical Degradation Behaviors of Epoxy Resin-Based Colloids under Extreme Conditions
- 2 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (23) , 15973-15986
Monitoring the Mechanical and Electrical Degradation Behaviors of Epoxy Resin-Based Colloids under Extreme Conditions
- Open Access
Energy-Storage Performance of High-Entropy (NaBiBa)0.205 (SrCa)0.1925TiO3-La(Mg0.5Zr0.5)O3 Ceramic Under Moderate Electric Fields
With the global low-voltage power market expanding rapidly, lead-free dielectric ceramics exhibit excellent stability and environmental friendliness, but their strong field-dependence limits low-field applications. There is an urgent need to develop lead-free ceramic systems with outstanding energy-storage performance under modest electric fields to meet the rapidly expanding global low-voltage power market for bulk ceramics. In this study, high-entropy ceramics (1 − x%)(NaBiBa)0.205(SrCa)0.1925TiO3-x%La(Zr0.5Mg0.5)O3 (x = 0–8) were successfully prepared. The introduced La(Zr0.5Mg0.5)O3 not only dissolves well in the high-entropy elementary lattice but also effectively improves its relaxation characteristics. High-entropy ceramics show optimal energy-storage characteristics, as indicated by an excellent energy-storage density of 4.46 J/cm3 and an energy-storage efficiency of 94.55% at 318 kV/cm. Moreover, its power density is as high as 92.20 MV/cm3, and the discharge time t0.9 is only 145 ns.
Open AccessEnergy-Storage Performance of High-Entropy (NaBiBa)0.205 (SrCa)0.1925TiO3-La(Mg0.5Zr0.5)O3 Ceramic Under Moderate Electric Fields
With the global low-voltage power market expanding rapidly, lead-free dielectric ceramics exhibit excellent stability and environmental friendliness, but their strong field-dependence limits low-field applications. There is an urgent need to develop lead-free ceramic systems with outstanding energy-storage performance under modest electric fields to meet the rapidly expanding global low-voltage power market for bulk ceramics. In this study, high-entropy ceramics (1 − x%)(NaBiBa)0.205(SrCa)0.1925TiO3-x%La(Zr0.5Mg0.5)O3 (x = 0–8) were successfully prepared. The introduced La(Zr0.5Mg0.5)O3 not only dissolves well in the high-entropy elementary lattice but also effectively improves its relaxation characteristics. High-entropy ceramics show optimal energy-storage characteristics, as indicated by an excellent energy-storage density of 4.46 J/cm3 and an energy-storage efficiency of 94.55% at 318 kV/cm. Moreover, its power density is as high as 92.20 MV/cm3, and the discharge time t0.9 is only 145 ns.
- 17 June 2025
- Published by Elsevier in ISA Transactions
- Vol. 165, 15-26
Dynamic formation tracking and fault-tolerant control of multi-agent systems based on distance and topology reconstruction methods
- 17 June 2025
- Published by Elsevier in ISA Transactions
- Vol. 165, 15-26
Dynamic formation tracking and fault-tolerant control of multi-agent systems based on distance and topology reconstruction methods
- Open Access
Thermoelectrical Properties of ITO/Pt, In2O3/Pt and ITO/In2O3 Thermocouples Prepared with Magnetron Sputtering
ITO/Pt, In2O3/Pt and ITO/In2O3 thermocouples were prepared by the radio frequency (RF) magnetron sputtering method. The XRD results showed that all the annealed ITO and In2O3 films annealed at high temperature present a cubic structure. Scanning electron microscope results showed that the thickness of the ITO and In2O3 films could reach 1.25 µm and 1.21 µm, respectively. The ITO/Pt and In2O3/Pt thin film thermocouples could obtain an output voltage of 68.7 mV and 183.5 mV, respectively, under a 900 °C temperature difference, and at the same time, the Seebeck coefficient reached 76.1 µV/°C and 203.9 µV/°C, respectively. For the ITO/In2O3 thermocouple, the maximum value of the output voltage was 165.7 mV under a 1200 °C temperature difference, and the Seebeck coefficient was 138.1 µV/°C. Annealing under different atmosphere conditions under 1000 °C, including vacuum, air and nitrogen atmospheres, resulted in values of the Seebeck coefficient that were 138.2 µV/°C, 135.5 µV/°C and 115.7 µV/°C, respectively.
Open AccessThermoelectrical Properties of ITO/Pt, In2O3/Pt and ITO/In2O3 Thermocouples Prepared with Magnetron Sputtering
ITO/Pt, In2O3/Pt and ITO/In2O3 thermocouples were prepared by the radio frequency (RF) magnetron sputtering method. The XRD results showed that all the annealed ITO and In2O3 films annealed at high temperature present a cubic structure. Scanning electron microscope results showed that the thickness of the ITO and In2O3 films could reach 1.25 µm and 1.21 µm, respectively. The ITO/Pt and In2O3/Pt thin film thermocouples could obtain an output voltage of 68.7 mV and 183.5 mV, respectively, under a 900 °C temperature difference, and at the same time, the Seebeck coefficient reached 76.1 µV/°C and 203.9 µV/°C, respectively. For the ITO/In2O3 thermocouple, the maximum value of the output voltage was 165.7 mV under a 1200 °C temperature difference, and the Seebeck coefficient was 138.1 µV/°C. Annealing under different atmosphere conditions under 1000 °C, including vacuum, air and nitrogen atmospheres, resulted in values of the Seebeck coefficient that were 138.2 µV/°C, 135.5 µV/°C and 115.7 µV/°C, respectively.
- Open Access
Facile Preparation, Microstructure and Dielectric Properties of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 Perovskite High-Entropy Ceramics
Preparation and properties of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 high-entropy ceramics are investigated. La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 high-entropy ceramics are prepared by a traditional two-step solid-state reaction method in air. La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 single-phase powders are synthesized by calcining the mixed oxides at 1000 °C for 20 h. The high-entropy ceramics are sintered at 1350–1650 °C in a muffle furnace for 4 h by using the above powders. The phase compositions of the high-entropy ceramics at different temperatures are characterized by X-ray diffraction (XRD) with Cu Kα radiation. A field-emission scanning electron microscope with energy-dispersive spectroscopy (EDS) is used to observe the microstructures and analyze the elemental distributions. The hardness and dielectric properties are measured and discussed.
Open AccessFacile Preparation, Microstructure and Dielectric Properties of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 Perovskite High-Entropy Ceramics
Preparation and properties of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 high-entropy ceramics are investigated. La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 high-entropy ceramics are prepared by a traditional two-step solid-state reaction method in air. La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 single-phase powders are synthesized by calcining the mixed oxides at 1000 °C for 20 h. The high-entropy ceramics are sintered at 1350–1650 °C in a muffle furnace for 4 h by using the above powders. The phase compositions of the high-entropy ceramics at different temperatures are characterized by X-ray diffraction (XRD) with Cu Kα radiation. A field-emission scanning electron microscope with energy-dispersive spectroscopy (EDS) is used to observe the microstructures and analyze the elemental distributions. The hardness and dielectric properties are measured and discussed.
- Open Access
Anisotropic Piezoelectric Properties of Porous (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 Ceramics with Oriented Pores through TBA-Based Freeze-Casting Method
Porous (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 (BCZT) piezoelectric ceramics with an oriented directional hole structure were prepared by using the tertbutyl alcohol (TBA)-based freeze-casting method. The influences of sintering temperatures on the microstructure and piezoelectric properties of porous BCZT ceramics were investigated both perpendicular and parallel to the freezing direction. With the increase in sintering temperatures and the porosities decreased from 58% to 42%, the compressive strength increased from 14.0 MPa to 25.0 MPa. In addition, the d33 value of 407 pC/N for the sample sintered at 1400 °C was obtained parallel to the freezing direction, which was 1.40 times that of the other direction.
Open AccessAnisotropic Piezoelectric Properties of Porous (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 Ceramics with Oriented Pores through TBA-Based Freeze-Casting Method
Porous (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 (BCZT) piezoelectric ceramics with an oriented directional hole structure were prepared by using the tertbutyl alcohol (TBA)-based freeze-casting method. The influences of sintering temperatures on the microstructure and piezoelectric properties of porous BCZT ceramics were investigated both perpendicular and parallel to the freezing direction. With the increase in sintering temperatures and the porosities decreased from 58% to 42%, the compressive strength increased from 14.0 MPa to 25.0 MPa. In addition, the d33 value of 407 pC/N for the sample sintered at 1400 °C was obtained parallel to the freezing direction, which was 1.40 times that of the other direction.
- Open Access
- 11 August 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (8) , 2042
Screen-Printed Flexible Thermoelectric Device Based on Hybrid Silver Selenide/PVP Composite Films
In recent years, the preparation of flexible thermoelectric generators by screen printing has attracted wide attention due to easy processing and high-volume production. In this work, we propose an n-type Ag2Se/polymer polyvinylpyrrolidone (PVP) film based on screen printing and investigate the effect of PVP on thermoelectric performance by varying the ratio of PVP. When the content ratio of Ag2Se to PVP is 30:1, i.e., PI30, the fabricated PI30 film has the best thermoelectric property. The maximum power factor (PF) of the PI30 is 4.3 μW·m−1·K−2, and conductivity reaches 81% of its initial value at 1500 bending cycles. Then, the film thermoelectric generator (F-TEG) fabricated by PI30 is tested for practical application; the output voltage and the maximum output power are 21.6 mV and 233.3 nW at the temperature difference of 40 K, respectively. This work demonstrates that the use of PVP combined with screen printing to prepare F-TEG is a simple and rapid method, which provides an efficient preparation solution for the development of environmentally friendly and wearable flexible thermoelectric devices.
- 11 August 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (8) , 2042
Open AccessScreen-Printed Flexible Thermoelectric Device Based on Hybrid Silver Selenide/PVP Composite Films
In recent years, the preparation of flexible thermoelectric generators by screen printing has attracted wide attention due to easy processing and high-volume production. In this work, we propose an n-type Ag2Se/polymer polyvinylpyrrolidone (PVP) film based on screen printing and investigate the effect of PVP on thermoelectric performance by varying the ratio of PVP. When the content ratio of Ag2Se to PVP is 30:1, i.e., PI30, the fabricated PI30 film has the best thermoelectric property. The maximum power factor (PF) of the PI30 is 4.3 μW·m−1·K−2, and conductivity reaches 81% of its initial value at 1500 bending cycles. Then, the film thermoelectric generator (F-TEG) fabricated by PI30 is tested for practical application; the output voltage and the maximum output power are 21.6 mV and 233.3 nW at the temperature difference of 40 K, respectively. This work demonstrates that the use of PVP combined with screen printing to prepare F-TEG is a simple and rapid method, which provides an efficient preparation solution for the development of environmentally friendly and wearable flexible thermoelectric devices.
- Open Access
- 2 August 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (8) , 924
High-Performance Temperature Sensor by Employing Screen Printing Technology
In the present study, a high-performance n-type temperature sensor was developed by a new and facile synthesis approach, which could apply to ambient temperature applications. As impacted by the low sintering temperature of flexible polyimide substrates, a screen printing technology-based method to prepare thermoelectric materials and a low-temperature heat treatment process applying to polymer substrates were proposed and achieved. By regulating the preparation parameters of the high-performance n-type indium oxide material, the optimal proportioning method and the post-treatment process method were developed. The sensors based on thermoelectric effects exhibited a sensitivity of 162.5 μV/°C, as well as a wide range of temperature measurement from ambient temperature to 223.6 °C. Furthermore, it is expected to conduct temperature monitoring in different scenarios through a sensor prepared in masks and mechanical hands, laying a foundation for the large-scale manufacturing and widespread application of flexible electronic skin and devices.
- 2 August 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (8) , 924
Open AccessHigh-Performance Temperature Sensor by Employing Screen Printing Technology
In the present study, a high-performance n-type temperature sensor was developed by a new and facile synthesis approach, which could apply to ambient temperature applications. As impacted by the low sintering temperature of flexible polyimide substrates, a screen printing technology-based method to prepare thermoelectric materials and a low-temperature heat treatment process applying to polymer substrates were proposed and achieved. By regulating the preparation parameters of the high-performance n-type indium oxide material, the optimal proportioning method and the post-treatment process method were developed. The sensors based on thermoelectric effects exhibited a sensitivity of 162.5 μV/°C, as well as a wide range of temperature measurement from ambient temperature to 223.6 °C. Furthermore, it is expected to conduct temperature monitoring in different scenarios through a sensor prepared in masks and mechanical hands, laying a foundation for the large-scale manufacturing and widespread application of flexible electronic skin and devices.