NGNaureen Ghafoor

Naureen Ghafoor

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Naureen Ghafoor has a total of 133 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A review of selected Swedish contributions to instrumentation at neutron scattering facilities

    by Thomas Arnold, Jens Birch, Elizabeth Blackburn, Glenn J. Coope, Reiner Dahint, Thomas Ederth, Karen Edler, Fredrik Eriksson, Björgvin Hjörvarsson, Marek Jacewicz, et al.

    The European Spallation Source in Lund, Sweden, is the next generation neutron research facility that will provide unprecedented capabilities for particle physics as well as materials and life science research through its high brightness, long-pulse neutron source and advanced instrument suite. To fully benefit from and to contribute to the build up of this facility, Swedish researchers are engaged in a number of instrument and first science projects. This review presents an overview of Swedish involvement in selected projects or proposals of projects and instruments at neutron scattering facilities. The examples highlight the extensive Swedish participation in specific instrument projects, science cases, and supporting technologies. The paper also highlights the larger scientific and strategic impact of this engagement, including capacity building, access to neutron techniques, and the strengthening of Sweden’s position within the European neutron science community to take the best advantage of the European Spallation Source.

  • Open Access

    Hf1-xAlxNy: A versatile material system for visible-range anti-reflection and high-reflection optical coatings

    by Marcus Lorentzon, Kenneth Järrendahl, Roger Magnusson, Jens Birch, Naureen Ghafoor

  • Open Access

    Three-fold superstructured superlattice HfN/HfAlN thin films for improved damage tolerance

    by Marcus Lorentzon, Rainer Hahn, Justinas Palisaitis, Helmut Riedl, Lars Hultman, Jens Birch, Naureen Ghafoor


  • Open Access

    Three-fold Superstructured Superlattice HfN/HfAlN Thin Films for Enhanced Toughness

    by M. Lorentzon, R. Hahn, J. Palisaitis, H. Riedl, L. Hultman, J. Birch, N. Ghafoor

    To simultaneously achieve high hardness and high toughness in protective coatings remains a fundamental challenge. Here, we harness the superlattice architecture to combine Koehler hardening while the coherent interfaces reduce the crack driving force and improve toughness, enabling coatings that are both hard and damage tolerant. We design and fabricate epitaxial HfN$_{1.33}$/Hf$_{0.76}$Al$_{0.24}$N$_{1.15}$ superlattices, deposited on MgO(001) substrates using low-energy, high-flux ion-assisted reactive magnetron sputtering. These superlattices with bilayer periods ranging from 6 to 20 nm, exhibit a unique three-fold superstructure, confirmed by X-ray diffraction and reciprocal space mapping (RSM). Each constituent forms distinct 3D checkerboard superstructures, with a period of 7.5 Å for HfN and 12.5 A for HfAlN. RSMs further reveal low mosaicity, high crystalline quality, and in-plane compressive strains, indicating well preserved coherence across interfaces. Mechanical testing shows that the superlattices maintain the high hardness of HfAlN (\~36 GPa) independent of bilayer period, while surpassing the softer HfN (~27 GPa), consistent with interface-driven Koehler strengthening. Micropillar compression shows brittle fracture on the {110} system, yet with distributed cracking and faster mechanical recovery compared to monolithic films, suggesting improved toughness. Cube-corner indentation further corroborate this behavior, with pile-up and suppressed fracture events. These results demonstrate that epitaxial HfN/HfAlN superlattices uniquely combine high hardness with improved toughness, enabled by their three-fold superstructured architecture. Leveraging the intrinsic high-temperature stability of HfN-based materials, this design offers a robust pathway toward next-generation protective coatings capable of maintaining performance under extreme conditions.

  • Open Access

    Metal-like ductility and high hardness in nitrogen-rich HfN thin films by point defect superstructuring

    by Marcus Lorentzon, Davide G. Sangiovanni, Naoki Takata, Tianqi Zhu, Rainer Hahn, Justinas Palisaitis, Lars Hultman, Jens Birch, Naureen Ghafoor

    The strength of refractory ceramics is much limited by their brittleness. Counterintuitively, we observe simultaneous high hardness and metallic-like ductility in highly overstoichiometric single-crystal HfN1.22 and HfN1.33 films grown by ion-assisted reactive magnetron sputtering. Here, we show by electron microscopy, diffraction methods, and ab-initio calculations the existence of a superstructure ordering of metal vacancies and nitrogen interstitials into sub-nanometer hyper-overstoichiometric and quasi-stoichiometric domains that self-organize into a checkerboard pattern superimposed onto the NaCl-structured lattice. A high intrinsic dislocation density and low dislocation nucleation barrier on {111} < 011> slip systems enable extraordinary ductility and strain hardening at >50% strain, in room temperature uniaxial compression of HfN1.22 micropillars. The films simultaneously exhibit a high hardness – tunable up to 28 GPa via control of stoichiometry – and a remarkable fracture resistance due to dislocation-mediated stress dissipation. The presented findings provide a route for synthesizing nitride superstructured films with unique hardness/toughness combinations.


  • Open Access

    Increased neutron reflectivity and polarization of neutron-optical engineered Fe/B411CTi multilayer optics

    by A. Zubayer, N. Ghafoor, K. A. Thorarinsdottir, A. Glavic, J. Stahn, G. Nagy, A. Vorobiev, F. Magnus, J. Birch, F. Eriksson

    The concept of scattering length density tuning for improved polarization is investigated for Fe/ B 4 11 CTi multilayers and compared to the commonly used Fe/Si system in polarizing multilayer neutron optics. X-ray and neutron reflectivity, magnetization, and neutron polarization were measured on such multilayers, highlighting differences from conventional Fe/Si multilayers. The multilayer systems were deposited with 25 Å period thickness, a layer thickness ratio of 0.35, and 20 periods using ion-assisted dc magnetron sputtering. Replacing Si with B 4 11 CTi for these multilayers showed an increase in reflectivity due to a reduction in interface width. Tuning the ratio between B 4 11 C and Ti in the nonmagnetic layers enabled a wide range of scattering length density contrasting and matching for spin-down neutrons, which in turn led to an improved polarization. These findings demonstrate the potential of Fe/ B 4 11 CTi multilayers as a promising option for polarizing neutron optics and highlight the concept of scattering length density tuning in a large range using B 4 11 CTi . Published by the American Physical Society 2024


  • Open Access

    Material design optimization for large-m 11B4C-based Ni/Ti supermirror neutron optics

    by Sjoerd Stendahl, Naureen Ghafoor, Anton Zubayer, Marcus Lorentzon, Alexei Vorobiev, Jens Birch, Fredrik Eriksson


  • Open Access

    Toughness enhancement in TiN/Zr0.37Al0.63N1.09 multilayer films

    by Marcus Lorentzon, Michael Meindlhumer, Justinas Palisaitis, Grzegorz Greczynski, Jozef Keckes, Johanna Rosen, Lars Hultman, Jens Birch, Naureen Ghafoor


  • Open Access

    Spectral Tuning of Polarization Selective Reflections Bands in GLAD deposited HfAlN chiral sculptured thin films

    by Samiran Bairagi, Marcus Lorentzon, Firat Angay, Roger Magnusson, Jens Birch, Ching-Lien Hsiao, Naureen Ghafoor, Kenneth Järrendahl

    We present the first report on fabrication of Hafnium aluminum nitride chiral sculptured thin films (CSTFs) using reactive magnetron sputtering in a glancing angle deposition configuration, and the analysis of its optical polarization properties. The resulting CSTFs were designed to give interference extrema or so-called circular Bragg (CB) resonances at desired wavelengths in the region from 370 to 690 nm. This was achieved by tailoring the growth of the chiral thin films to obtain a dielectric pitch between 87 and 260.9 nm. The spectral positions of the obtained CB resonances were compared to values from analytical expressions. Contrary to the common case where the dielectric pitch is half of the growth-related rotational pitch due to a 180° symmetry, this pitch was shown to be the same as the rotational pitch. It is concluded that this is due to the c-axis of the CSTF being tilted about 45° from the substrate normal. The morphology and crystallographic characterizations were done using scanning electron microscopy and X-ray diffraction, respectively, while the tilt of the crystal lattice was corroborated using X-ray diffraction pole figures. The optical response from the CSTFs was analyzed using Mueller matrix spectroscopic ellipsometry from which the degree of circular polarization at the CB resonances was obtained. In addition, a strong non-reciprocal reflection was observed which could be attributed to the helicoidal morphology and the intrinsic crystal tilt. An optical layered model of the chiral structure including azimuthal twist and using the Cauchy dispersion relations was used to simulate the Mueller matrix elements and compare with the ellipsometry measurements. The correlation between the simulated and experimental data gave information of the morphological parameters of the CSTF and its optical properties.

  • Open Access

    Material design optimization for large-m 11B4C-based Ni/Ti supermirror neutron optics

    by Sjoerd Stendahl, Naureen Ghafoor, Anton Zubayer, Marcus Lorentzon, Alexei Vorobiev, Jens Birch, Fredrik Eriksson

    State-of-the-art Ni/Ti supermirror neutron optics have limited reflected intensity and a restricted neutron energy range due to the interface width. Incorporating low-neutron-absorbing 11B4C enhances reflectivity and allows for thinner layers to be deposited, with which more efficient supermirrors with higher m-values can be realized. However, incorporating 11B4C reduces the optical contrast, limiting the attainable reflectivity at low scattering vectors, making this approach infeasible. This study explores various approaches to optimize the material design of 11B4C-containing Ni/Ti supermirrors to maintain high reflectivity at low scattering vectors and achieve low interface widths at large scattering vectors. The scattering length density contrast versus interface width is investigated for multilayer periods of 30 Å, 48 Å, and 84 Å, for designs involving pure Ni/Ti multilayers, multilayers with 11B4C co-deposited in Ni and Ti layers, multilayers with 11B4C co-deposited only in Ni layers, and multilayers with 11B4C as thin interlayers between Ni and Ti layers. Our results suggest that a depth-graded hybrid material design by incorporating 11B4C inside the Ni and Ti layers, below approximately 26 Å, and introducing 1.5 Å 11B4C interlayers between the thicker Ni and Ti layers can achieve a higher reflectivity than state-of-the-art Ni/Ti multilayers over the entire scattering vector range.