Anupam Selot
Research Subjects
Anupam Selot has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Mahendra Aynyas
Physics, csa govt college sehore mp, sehore, MP, INDIA
3 shared publicationsSanjay Bhatt
Physics, Geetanjali Govt Girls College Bhopal(M.P.), BHOPAL, Madhyapradesh, INDIA
2 shared publications- Fozia Zia Haque
Optical Nano Materials Laboratory Physics Department MANIT BHOPAL, India
1 shared publication - Govind B. Nair
Department of Physics, University of the Free State, Bloemfontein, South Africa
1 shared publication J. Tripathi
Department of Physics ISLE, IPS Academy Indore India
1 shared publicationKapil Dev
Department of Physics, Barkatullah University, Bhopal, India
1 shared publication
Latest Publications
- 4 July 2019
- Published by Wiley in Luminescence
- Vol. 34 (8) , 804-811
Study of luminescence properties of dysprosium‐doped CaAl12O19 phosphor for white light‐emitting diodes
Dy3+‐doped CaAl12O19 phosphors were synthesized utilizing a combustion method. Crystal structure and morphological examinations were performed respectively using X‐ray diffraction (XRD) and scanning electron microscopy (SEM) techniques to identify the phase and morphology of the synthesized samples. Fourier transform infrared spectroscopy (FTIR) estimations were carried out using the KBr method. Photoluminescence properties (excitation and emission) were recorded at room temperature. CaAl12O19:Dy3+ phosphor showed two emission peaks respectively under a 350‐nm excitation wavelength, centered at 477 nm and 573 nm. Dipole–dipole interaction via nonradiative energy shifting has been considered as the major cause of concentration quenching when Dy3+ concentration was more than 3 mol%. The CIE chromaticity coordinates positioned at (0.3185, 0.3580) for the CaAl12O19:0.03Dy3+ phosphor had a correlated color temperature (CCT) of 6057 K, which is situated in the cool white area. Existing results point out that the CaAl12O19:0.03Dy3+ phosphor could be a favorable candidate for use in white light‐emitting diodes (WLEDs).
- 4 July 2019
- Published by Wiley in Luminescence
- Vol. 34 (8) , 804-811
Study of luminescence properties of dysprosium‐doped CaAl12O19 phosphor for white light‐emitting diodes
Dy3+‐doped CaAl12O19 phosphors were synthesized utilizing a combustion method. Crystal structure and morphological examinations were performed respectively using X‐ray diffraction (XRD) and scanning electron microscopy (SEM) techniques to identify the phase and morphology of the synthesized samples. Fourier transform infrared spectroscopy (FTIR) estimations were carried out using the KBr method. Photoluminescence properties (excitation and emission) were recorded at room temperature. CaAl12O19:Dy3+ phosphor showed two emission peaks respectively under a 350‐nm excitation wavelength, centered at 477 nm and 573 nm. Dipole–dipole interaction via nonradiative energy shifting has been considered as the major cause of concentration quenching when Dy3+ concentration was more than 3 mol%. The CIE chromaticity coordinates positioned at (0.3185, 0.3580) for the CaAl12O19:0.03Dy3+ phosphor had a correlated color temperature (CCT) of 6057 K, which is situated in the cool white area. Existing results point out that the CaAl12O19:0.03Dy3+ phosphor could be a favorable candidate for use in white light‐emitting diodes (WLEDs).
- 13 July 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (8) , 082001
Study of thermo luminescence performance under UV excitation of aluminates based phosphor
Characterization and wide study of thermoluminescecne and photoluminescence response of a Y3Al5O12 phosphor with Mn2+ has been reported here. Different concentration of Mn2+ activated Y3Al5O12 phosphor prepared by the combustion method at 5000C.Crystal structure of prepared phosphor were investigated by XRD and FTIRthe optical properties investigated by UV-VIS spectroscopy. The thermoluminescence sensitivity observed when a wide range of UV excitation at 5,10,15,20 and 25 minutes and after 15 minutes saturation occurred. Further detailed TL parameters kinetic order, activation energy and frequency factor calculated by the de convoluted curve. Therefore various study factors shows that Mn doped phosphor is suitable and compatible for the solid state lighting devices and may be dosimeter purpose.
- 13 July 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (8) , 082001
Study of thermo luminescence performance under UV excitation of aluminates based phosphor
Characterization and wide study of thermoluminescecne and photoluminescence response of a Y3Al5O12 phosphor with Mn2+ has been reported here. Different concentration of Mn2+ activated Y3Al5O12 phosphor prepared by the combustion method at 5000C.Crystal structure of prepared phosphor were investigated by XRD and FTIRthe optical properties investigated by UV-VIS spectroscopy. The thermoluminescence sensitivity observed when a wide range of UV excitation at 5,10,15,20 and 25 minutes and after 15 minutes saturation occurred. Further detailed TL parameters kinetic order, activation energy and frequency factor calculated by the de convoluted curve. Therefore various study factors shows that Mn doped phosphor is suitable and compatible for the solid state lighting devices and may be dosimeter purpose.
- 1 August 2016
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1141, 215-221
Thermoluminescence Behavior under Different Mega Voltage of Aluminates Based Phosphor
Phosphor material CaYAl3O7 with transition metal Mn2+ were prepared by combustion method at 500°C. The prepared phosphor material characterized for their crystallinity and nature by powder XRD and FTIR. For the thermoluminescecne study, the samples irradiated with 6MeV and 16 MeV. In this voltage phosphor exhibit TL spectra at 1900c that corresponding to dosimetric peak. From the observations and detailed kinetic parameter study shows that phosphor can be act as dosimeter.
- 1 August 2016
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1141, 215-221
Thermoluminescence Behavior under Different Mega Voltage of Aluminates Based Phosphor
Phosphor material CaYAl3O7 with transition metal Mn2+ were prepared by combustion method at 500°C. The prepared phosphor material characterized for their crystallinity and nature by powder XRD and FTIR. For the thermoluminescecne study, the samples irradiated with 6MeV and 16 MeV. In this voltage phosphor exhibit TL spectra at 1900c that corresponding to dosimetric peak. From the observations and detailed kinetic parameter study shows that phosphor can be act as dosimeter.
- 23 July 2013
- Published by Wiley in Luminescence
- Vol. 29 (4) , 362-366
Structural and photoluminescence study of Mn2+‐activated CaYAl3O7 blue phosphors
The structural and photoluminescence properties of CaYAl3O7 phosphor material doped with varying concentration of Mn2+ have been studied. The phosphor material was synthesized by the combustion method at 500 °C and was characterized using X‐ray diffraction, Fourier transform infrared spectroscopy and photoluminescence spectroscopy (PL). X‐ray diffraction showed that the crystallites have average sizes in the range of ~58–70 nm. Corresponding Fourier transform infrared spectroscopy investigations confirm the phase formation and the presence of aluminate group (Al‐O bands) in CaYAl3O7:Mn2+ phosphor. Under the excitation at 356 nm wavelength, the PL spectra show the occurrence of two emission peaks obtained in the blue region at 389 nm and 412 nm, which is attributed to the 4 T1(G) → 6A1 transition of Mn2+ ion. Upon increasing Mn2+ concentration, the relative PL intensity shows an initial decrement followed by an increase displaying the effect of concentration quenching. Overall the results suggest the possibility of using this material in white lighting devices and plasma display panels. Copyright © 2013 John Wiley & Sons, Ltd.
- 23 July 2013
- Published by Wiley in Luminescence
- Vol. 29 (4) , 362-366
Structural and photoluminescence study of Mn2+‐activated CaYAl3O7 blue phosphors
The structural and photoluminescence properties of CaYAl3O7 phosphor material doped with varying concentration of Mn2+ have been studied. The phosphor material was synthesized by the combustion method at 500 °C and was characterized using X‐ray diffraction, Fourier transform infrared spectroscopy and photoluminescence spectroscopy (PL). X‐ray diffraction showed that the crystallites have average sizes in the range of ~58–70 nm. Corresponding Fourier transform infrared spectroscopy investigations confirm the phase formation and the presence of aluminate group (Al‐O bands) in CaYAl3O7:Mn2+ phosphor. Under the excitation at 356 nm wavelength, the PL spectra show the occurrence of two emission peaks obtained in the blue region at 389 nm and 412 nm, which is attributed to the 4 T1(G) → 6A1 transition of Mn2+ ion. Upon increasing Mn2+ concentration, the relative PL intensity shows an initial decrement followed by an increase displaying the effect of concentration quenching. Overall the results suggest the possibility of using this material in white lighting devices and plasma display panels. Copyright © 2013 John Wiley & Sons, Ltd.