Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Nader Asnafi has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Editorial

    by Nader Asnafi, Harald Leitner, Gerhard Hackl

  • Open Access

    Technological Uncertainty and Standardization Strategies: A Coopetition Framework

    by Cesare Antonio F. Riillo, Renaud Allamano-Kessler, Nader Asnafi, Vladislav V. Fomin, Geerten van de Kaa

    Standards may be arrived at through various coordination mechanisms, including cooperation, coopetition, or competition. This article explores how technological uncertainty affects the coordination mechanism for standardization. The article is based on the Community Innovation Survey, a sizeable firm-level survey representative of the Luxembourgish economy. The econometric analysis finds evidence that firms facing technological uncertainty will choose for standardization through competition and coopetition.


  • Open Access

    Metal Additive Manufacturing—State of the Art 2020

    by Nader Asnafi

    Additive manufacturing (AM), more popularly known as 3D printing, comprises a group of technologies used to produce objects through the addition (rather than the removal) of material


  • Open Access

    Tool and Die Making, Surface Treatment, and Repair by Laser-based Additive Processes

    by Nader Asnafi

    This paper explores the possibilities to use laser-based additive processes to make, surface treat and repair/remanufacture tools, dies and molds for cold working, hot working, and injection molding. The failures encountered in these applications are described. The materials used conventionally and in the laser additive processes are accounted for. The properties of the tools, dies and molds made by Laser-based Powder Bed Fusion (L-PBF) are as good as and in some cases better than the properties of those made in wrought materials. Shorter cycle time, reduced friction, smaller abrasive wear, and longer life cycle are some of the benefits of L‑PBF and Directed Energy Deposition with powder (DED-p) (or Laser Metal Deposition with powder, LMD‑p, or Laser Cladding, LC). L‑PBF leads to higher toolmaking costs and shorter toolmaking lead time. Based on a review of conducted investigations, this paper shows that it is possible to design and make tools, dies and molds for and by L‑PBF, surface functionalize them by DED-p (LMD‑p, LC), and repair/remanufacture them by DED-p (LMD‑p, LC). With efficient operational performance as the target for the whole tool life cycle, this combination of L‑PBF and DED-p (LMD‑p, LC) has the greatest potential for hot working and injection molding tools and the smallest for cold working tools (due to the current high L‑PBF and DED-p (LMD‑p, LC) costs).


  • Open Access

    Application of Laser-Based Powder Bed Fusion for Direct Metal Tooling

    by Nader Asnafi

    The journey of production tools in cold working, hot working, and injection molding from rapid tooling to additive manufacturing (AM) by laser-based powder bed fusion (L-PBF) is described. The current machines and their configurations, tool steel powder materials and their properties, and the L-PBF process parameters for these materials are specified. Examples of production tools designed for and made by L-PBF are described. Efficient design, i.e., high tooling efficiency and performance in operation, should be the primary target in tool design. Topology and lattice structure optimization provide additional benefits. Using efficient design, L-PBF exhibits the greatest potential for tooling in hot working and injection molding. L-PBF yields high tooling costs, but competitive total costs in hot working and injection molding. Larger object sizes that can be made by L-PBF, a larger number of powder metals that are designed for different tooling applications, lower feedstock and L-PBF processing costs, further L-PBF productivity improvement, improved surface roughness through L-PBF, and secured quality are some of the targets for the research and development in the future. A system view, e.g., plants with a high degree of automation and eventually with cyber-physically controlled smart L-PBF inclusive manufacturing systems, is also of great significance.


  • Open Access

    Production Tools Made by Additive Manufacturing Through Laser-based Powder Bed Fusion

    by Nader Asnafi, Jukka Rajalampi, David Aspenberg, Anton Alveflo

    This paper deals with the design and production of stamping tools and dies for sheet metal components and injection molds for plastic components. Laser-based Powder Bed Fusion (LPBF) is the additive manufacturing method used in this investigation. Solid and topology optimized stamping tools and dies 3D-printed in DIN 1.2709 (maraging steel) by LPBF are approved/certified for stamping of up to 2‑mm thick hot-dip galvanized DP600 (dual-phase steel sheet). The punch in a working station in a progressive die used for stamping of 1‑mm thick hot-dip galvanized DP600 is 3D-printed in DIN 1.2709, both with a honeycomb inner structure and after topology optimization, with successful results. 3D printing results in a significant lead time reduction and improved tool material efficiency. The cost of 3D-printed stamping tools and dies is higher than the cost of those made conventionally. The core (inserts) of an injection mold is 3D-printed in DIN 1.2709, conformal cooling optimized and 3D-printed in Uddeholm AM Corrax, and compared with the same core made conventionally. The cooling and cycle time can be improved, if the injection molding core (inserts) is optimized and 3D-printed in Uddeholm AM Corrax. This paper accounts for the results obtained in the above-mentioned investigations.


  • Open Access

    Design and Validation of 3D-Printed Tools for Stamping of DP600

    by Nader Asnafi, Jukka Rajalampi, David Aspenberg

    This paper is focused on automotive stamping tools & dies and the impact of 3D metal printing on design and production of such tools & dies. Forming (U-bend) and trimming/cutting/blanking tools & dies designed both conventionally and by topology optimization were 3D-printed, using Laser-based Powder Bed Fusion (LPBF), in the maraging steel DIN 1.2709. These 3D-printed tools were then used to form (U-bend) and trim/cut/blank 2-mm thick hot-dip galvanized DP600. An approval of the forming tool required that 50,000 U-bends were formed in 2-mm thick DP600 without any surface scratches on the sheet metal part. An approval of the trimming/cutting/blanking tool required 100,000 trimming strokes with this tool, where the maximum (sheet metal) burr height was lower than 0.2 mm (lower than 10% of the sheet thickness (2 mm in this study)). The 3D-printed forming and trimming/cutting/blanking tools & dies - both the conventionally designed and the topology optimized versions – managed the criteria mentioned above and were therefore approved. The approval means that these concepts can now be used to make production stamping tools and dies. This paper describes the topology optimization, the forming & trimming/cutting/blanking testing, the results yielding an approval of the 3D-printed tool concepts, and the 3D-printed production tools for stamping of DP600.


  • Open Access

    Preface

    by Nader Asnafi

    Nader Asnafi Editor, Proceedings of the International Conference on Mechanical, Electric and Industrial Engineering and Conference Chair Örebro University, Sweden E-mail: Nader.Asnafi@oru.se The second International Conference on Mechanical, Electric and Industrial Engineering (MEIE 2019) was held successfully in Hangzhou, China, May 25-27, 2019. This conference is an annual forum for researchers and application developers, promotes valuable contacts within and between academia and industry, and addresses both basic research and the societal/industrial technological needs within mechanical, electric and industrial engineering. The proceedings of this conference comprises 152 accepted contributions selected from 343 submissions. We would like to express our gratitude to the reviewers of these manuscripts, who provided constructive criticism and stimulating comments and suggestions to the authors. Many thanks to the authors for their valuable contributions and to the attendees for their active participation. We are grateful to the conference chair and all members of the technical programme committee for their valuable time and advices. We are also grateful to the internationally renowned scientists who acted as keynote speakers at the conference. We would like to thank the organizers who made this conference to yet another unforgettable experience. Finally, our sincere gratitude goes also to the IOP Publishing editors and managers for their helpful cooperation during the preparation of the conference proceedings. On behalf of the Organizing Committee of MEIE 2019 Nader Asnafi The MEIE2019-photos from the conference is available in this pdf.