MKMinsu Kim

Minsu Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Minsu Kim has a total of 78 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dual Catalytic and Self‐Assembled Growth of Two‐Dimensional Transition Metal Dichalcogenides Through Simultaneous Predeposition Process

    by Minsu Kim, Minkyun Son, Dong‐Bum Seo, Jin Kim, Moonjeong Jang, Dong In Kim, Seunghun Lee, Soonmin Yim, Wooseok Song, Sung Myung, et al.

    The recent introduction of alkali metal halide catalysts for chemical vapor deposition (CVD) of transition metal dichalcogenides (TMDs) has enabled remarkable two‐dimensional (2D) growth. However, the process development and growth mechanism require further exploration to enhance the effects of salts and understand the principles. Herein, simultaneous predeposition of a metal source (MoO3) and salt (NaCl) by thermal evaporation is adopted. As a result, remarkable growth behaviors such as promoted 2D growth, easy patterning, and potential diversity of target materials can be achieved. Step‐by‐step spectroscopy combined with morphological analyses reveals a reaction path for MoS2 growth in which NaCl reacts separately with S and MoO3 to form Na2SO4 and Na2Mo2O7 intermediates, respectively. These intermediates provide a favorable environment for 2D growth, including an enhanced source supply and liquid medium. Consequently, large grains of monolayer MoS2 are formed by self‐assembly, indicating the merging of small equilateral triangular grains on the liquid intermediates. This study is expected to serve as an ideal reference for understanding the principles of salt catalysis and evolution of CVD in the preparation of 2D TMDs.


  • Atomic Layer Deposited RuO2 Diffusion Barrier for Next Generation Ru‐Interconnects

    by Youn‐Hye Kim, Minsu Kim, Yohei Kotsugi, Taehoon Cheon, Debananda Mohapatra, Yujin Jang, Jong‐Seong Bae, Tae Eun Hong, Rahul Ramesh, Ki‐Seok An, et al.

    Atomic layer deposition (ALD) is a suitable technology for conformally depositing thin films on nanometer‐scale 3D structures. RuO2 is a promising diffusion barrier for Ru interconnects owing to its compatibility with Ru ALD and its remarkable diffusion barrier properties. Herein, a RuO2 diffusion barrier using an ALD process is developed. The highly reactive Ru precursor [tricarbonyl(trimethylenemethane)ruthenium] and improved O2 supply enable RuO2 deposition. The optimal process conditions [pulsing time ratio (tO2/tRu): 10, process pressure: 1 Torr, temperature: 180 °C] are established for the RuO2 growth. Growth parameters, such as the growth rate (0.56 Å cycle–1), nucleation delay (incubation period: 6 cycles), and conformality (step coverage: 100%), are also confirmed on the SiO2 substrate. The structural and electrical properties of the Ru/RuO2/Si multilayer are investigated to explore the diffusion barrier performance of the ALD‐RuO2 film. The formation of Ru silicide does not occur without the conductivity degradation of the Ru/RuO2/Si multilayer with an increase in the annealing temperature up to 850 °C, thus demonstrating that interdiffusion of Ru and Si is completely suppressed by a thin (5 nm) ALD‐RuO2 film. Consequently, the practical growth behavior and diffusion barrier performance of RuO2 can serve as a potential diffusion barrier for Ru interconnects.


  • Atomic Layer Deposition of Iridium Using a Tricarbonyl Cyclopropenyl Precursor and Oxygen

    by Na-Yeon Park, Minsu Kim, Youn-Hye Kim, Rahul Ramesh, Dip K. Nandi, Tomohiro Tsugawa, Toshiyuki Shigetomi, Kazuharu Suzuki, Ryosuke Harada, Miso Kim, et al.


  • Open Access

    Terminal Sinter-Bonding Using Silver Paste for Aluminum Nitride Heater

    by Yun-Chan Kim, Dong-Yurl Yu, Junhyuk Son, Ji-Sung Kim, Min-Su Kim, Chang-Woo Lee, Jai-Won Byeon, Junghwan Bang

    In this study, a Ag sintered joint was applied to replace the high-Pb solder to bonding materials between Aluminum Nitride (AlN) substrates and terminals used in wafer bake processes. The Ag sintered joint was fabricated using an optimized temperature profile. The high-Pb solder specimens were fabricated using a conventional reflow process. An X-ray analysis and mechanical properties evaluation of the specimens were performed. Subsequently, a high temperature storage test was performed for a high temperature reliability evaluation. The initial void analysis result showed that the Ag sintered joint and high-Pb solder joint had approximately 1%, and 20% voids, respectively. After being stored at a high temperature of 280 ℃ for 1000 h, the shear strength of the high-Pb solder joint decreased by approximately 27% owing to the Pb degradation. However, the shear strength of the Ag sintered joint was maintained. After 1000 h of a high temperature storage test, growth of Ni3Sn4 intermetallic compound and Kirkendall voids were observed at the high-Pb solder interface. Furthermore, a Ag-Au layer was observed at the sintered Ag interface. In addition, the sintered Ag joints densificated after the high temperature storage test.


  • Effect of the Bilayer Period of Atomic Layer Deposition on the Growth Behavior and Electrical Properties of the Amorphous In–Zn–O Film

    by Sangbong Lee, Yun-Ho Kang, Min-Sik Kim, Hyerin Lee, Yeong-Ho Cho, Minsu Kim, Tae-Sik Yoon, Hyun-Mi Kim, Ki-Bum Kim

    This study reports on the effect of a bilayer period on the growth behavior, microstructure evolution, and electrical properties of ALD deposited In-Zn-O (IZO) films, fixing the ALD cycle ratio of In-O: Zn-O as 9:1. Here, the bilayer period is defined as the total number of ALD cycles in one supercycle of In-O and Zn-O by alternately stacking Zn-O and In-O layers at a temperature of 220 °C. IZO films with a bilayer period from 10 to 40 cycles, namely, IZO [In-O: Zn-O = 9:1] to IZO[36:4], result to form an amorphous phase with a resistivity of 4.94 × 10-4 Ω∙cm. However, by increasing the bilayer period above 100 cycles, the IZO films begin to form a mixed amorphous-nanocrystalline microstructure, resulting from the limited intermixing at the interfaces. Concomitantly, the overall film resistivity is considerably increased with a simultaneous decrease in both the carrier mobility and the concentration. These results reveal not only the importance of the bilayer period in designing the ALD stacking sequence in the ALD-IZO but also provide the possibility to form various multi-layered materials with different electrical properties.


  • Sheet Resistance Analysis of Interface-Engineered Multilayer Graphene: Mobility Versus Sheet Carrier Concentration

    by Min-Sik Kim, Minsu Kim, Suyeon Son, Seong-Yong Cho, Sangbong Lee, Dong-Kwan Won, Jaechul Ryu, Inseob Bae, Hyun-Mi Kim, Ki-Bum Kim

    Both interlayer-undoped and interlayer-doped multilayer graphenes were prepared by the multiple transfers of graphene layers with multiple Cu etching (either dopant free or doped during etching) and transfer, and the effect of interface properties on the electrical properties of multilayer graphene was investigated by varying the number of layers from 1 to 12. In both of the cases, the sheet resistance decreased with increasing number of layers; from 700 to 104 Ω/sq for the interlayer-undoped graphene and from 280 to 25 Ω/sq for the interlayer-doped graphene. Further, Hall measurements revealed that the origins of the sheet resistance reduction in the two cases are different. In the interlayer-undoped graphene, the sheet resistance decreased due to the increase in mobility with the addition of inner layers, which has a low carrier density and high carrier mobility. On the other hand, it decreased due to the increase in sheet carrier density in the interlayer-doped multilayer graphene. The mobility and carrier density variations in both of the cases were confirmed by fitting with the model of Hall effect in the heterojunction. In addition, we found that surface property modification by the doping of the top layer and the formation of double-layer graphene with different partial coverages allow the separate control of carrier density and mobility. Our study provides an effective approach for controlling the properties of multilayer graphene for electronic applications.


  • Selective Atomic Layer Deposition of Metals on Graphene for Transparent Conducting Electrode Application

    by Minsu Kim, Shunichi Nabeya, Seung-Min Han, Min-Sik Kim, Sangbong Lee, Hyun-Mi Kim, Seong-Yong Cho, Do-Joong Lee, Soo-Hyun Kim, Ki-Bum Kim

    Although graphene has considerable potential as a next-generation transparent conducting electrode (TCE) material owing to its excellent optical transparency and flexibility, its electrical properties require further improvement for an industrial application. This study reports a pathway of doping graphene by selective atomic layer deposition (ALD) of metals to elevate electrical conductivity of graphene. The introduction of a novel Pt precursor [Dimethyl(N,N-dimethyl-3-butene-1-amine-N)platinum(II); C8H19NPt; DDAP] facilitates a low-temperature (165 °C) process. The sheet resistance (Rs) of graphene is reduced significantly from 471 Ωsq-1 to 86.8 Ωsq-1 after 200 cycles of Pt ALD, while the optical transmittance at 550 nm (T) is maintained above 90% up to 200 cycles due to the selective growth of Pt on the defects of graphene. Furthermore, comprehensive analysis, including metal (Ru, Pt, and Ni) ALD on graphene, metal (Ru, Pt, Ni, Au, and Co) evaporation on graphene, and change in the ALD chemicals, demonstrates that ALD allows efficient graphene doping and the oxygen affinity of metal is one of the key properties for efficient graphene doping. Finally, Pt ALD is applied to a multi-layer graphene to further reduce Rs down to 75.8 Ωsq-1, yet to be highly transparent (T: 87.3%) after 200 cycles. In summary, the selective ALD of metals opens a way of improving the electrical properties of graphene to a level required for the industrial TCE application and has a potential to promote a development of other types of functional metal-graphene composites.


  • Open Access

    Electrical properties of graphene/In2O3 bilayer with remarkable uniformity as transparent conducting electrode

    by Sangbong Lee, Minsu Kim, Seong-Yong Cho, Do-Joong Lee, Hyun-Mi Kim, Ki-Bum Kim

    A graphene/In2O3 bilayer (termed as GI-bilayer) is proposed as a transparent conducting electrode with remarkably improved areal-uniformity. To fabricate this new structure, an In2O3 layer with a thickness of less than 50 nm was grown by atomic layer deposition and then a graphene layer was grown by chemical vapor deposition and subsequently transferred onto the as-grown In2O3 layer. Electrical and optical properties of the GI-bilayer were systematically studied to verify effects of the underlying In2O3 layer. Hall measurements and following analysis showed a conductance enhancement of the GI-bilayer owing to p-type doping of graphene. Specifically, Raman analysis and ultraviolet photoelectron spectroscopy were performed to prove p-type doping of the graphene in the GI-bilayer. In addition, the GI-bilayer exhibited the significantly improved uniformity of the sheet resistance compared to that of a conventional monolayer of graphene. There was a duality on the role of the In2O3 underlayer in the GI-bilayer. It acted as a dopant layer to the graphene and lowered the sheet resistance from 863 to 510 Ω/sq as well as compensated microscale defects on graphene. More importantly, the In2O3 underlayer resulted in the extremely reduced standard deviation of sheet resistance from 150 to 7.5 Ω/sq over the area of 49 cm2.


  • Effect of ethanolamine passivation of ZnO nanoparticles in quantum dot light emitting diode structure

    by Kyeongchan Noh, Minsu Kim, Sang-Hyun Lee, Hwang-Sik Yun, Tae-Hyeon Lim, Yeongho Choi, Ki-Ju Kim, Yiran Jiang, Keonwon Beom, Minju Kim, et al.


  • Open Access

    Atomic Layer Deposition of Nickel Using a Heteroleptic Ni Precursor with NH3 and Selective Deposition on Defects of Graphene

    by Minsu Kim, Shunichi Nabeya, Dip K. Nandi, Kazuharu Suzuki, Hyun-Mi Kim, Seong-Yong Cho, Ki-Bum Kim, Soo-Hyun Kim

    Atomic layer deposition (ALD) of Ni was demonstrated by introducing a novel oxygen-free heteroleptic Ni precursor, (η3-cyclohexenyl)(η5-cyclopentadienyl)nickel(II) [Ni(Chex)(Cp)]. For this process, non-oxygen-containing reactants (NH3 and H2 molecules) were used within a deposition temperature range of 320–340 °C. Typical ALD growth behavior was confirmed at 340 °C with a self-limiting growth rate of 1.1 Å/cycle. Furthermore, a postannealing process was carried out in a H2 ambient environment to improve the quality of the as-deposited Ni film. As a result, a high-quality Ni film with a substantially low resistivity (44.9 μΩcm) was obtained, owing to the high purity and excellent crystallinity. Finally, this Ni ALD process was also performed on a graphene surface. Selective deposition of Ni on defects of graphene was confirmed by transmission electron microscopy and atomic force microscopy analyses with a low growth rate (∼0.27 Å/cycle). This unique method can be further used to fabricate two-dimensional functional materials for several potential applications.