DLDomaniç Lavery

Domaniç Lavery

*This is an algorithmically generated author record based on publicly available information.

Domaniç Lavery has a total of 175 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Optimizing Optical Engine Features for Subsea Cable Systems

    by Siddharth Varughese, Geoff Bennett, Domaniç Lavery, Han Sun, Pierre Mertz

    We introduce a taxonomy for subsea optical fiber cables as used for intercontinental telecommunications systems. With reference to this new classification, we describe how the design of optical engines has both influenced, and been influenced by, the development of subsea cables. We outline the pivotal role coherent transceivers have played in the development of high-capacity subsea cables, specifically with reference to advances in digital signal processing and coded modulation, and we highlight the opportunities and challenges of upgrading legacy systems with state-of-the-art coherent transceivers. In this work, we also look to future cable designs and ask how the availability of fundamentally new fiber types (specifically multicore and hollow core fibers) will have an influence on subsea cables and, once again, change transceiver requirements.


  • Scenarios for DSP Evolution in Long Haul Optical Communication Systems

    by Domaniç Lavery, Siddharth Varughese, Pierre Mertz, Han Sun

    We discuss how changing market requirements and the availability of coherent pluggable modules present challenges for DSP development. Possible development paths for DSP in coherent, long-haul transmission systems are discussed.

  • Promising DSP Techniques to Increase Long Haul Transmission Capacity

    by Domaniç Lavery, Siddharth Varughese, Carlo Condo, Mohamed Osman, Mehdi Torbatian, Sandy Thomson, Yuejian Wu, Robert Maher, Han Sun

    The state-of-the-art in realtime DSP for long haul coherent optical communication systems is described. We discuss how emerging applications for coherent transceivers may in-fluence DSP design choices.


  • High-Cardinality Geometrical Constellation Shaping for the Nonlinear Fibre Channel

    by Eric Sillekens, Gabriele Liga, Domaniç Lavery, Polina Bayvel, Robert. I. Killey

    This paper presents design methods for highly efficient optimisation of geometrically shaped constellations to maximise data throughput in optical communications. It describes methods to analytically calculate the information-theoretical loss and the gradient of this loss as a function of the input constellation shape. The gradients of the mutual information (MI) and generalised mutual information (GMI) are critical to the optimisation of geometrically-shaped constellations. The analytically derived gradients of the achievable information rate metrics with respect to the input constellation are presented. The proposed method allows for improved design of higher cardinality and higher-dimensional constellations for optimising both linear and nonlinear fibre transmission throughput. Near-capacity achieving constellations with up to 8192 points for both 2 and 4 dimensions are presented. In the best case, a GMI value within 0.06 b/2Dsymbol of the additive white Gaussian noise channel (AWGN) capacity was achieved. Additionally, a design algorithm reducing the design computation time from days to minutes is introduced, allowing for the design of optimised constellations for both linear AWGN and nonlinear fibre channels over a wide range of signal-to-noise ratio values.


  • Open Access

    Performance Oriented DSP for Flexible Long Haul Coherent Transmission

    by Mehdi Torbatian, Domanic Lavery, Mohammad Osman, Demin Yao, David Millar, Yuliang Gao, Aditya Kakkar, Ziad El-Sahn, Clayton Doggart, Ahmed E. Morra, et al.

    In long haul optical fiber communication networks, which can span thousands of kilometers, bandwidth is at a premium due to the relatively low availability of optical fibers when compared with network traffic demands. Therefore, these networks require the highest performance in the physical layer, with transceivers that are capable of extracting all the available capacity from each optical fiber. Digital coherent transmitters and receivers, which enhance optical transmission systems by using digital signal processing, are essential for achieving this goal. This tutorial discusses the digital signal processing techniques that are used in the design of high performance coherent modems to compensate for adverse channel effects suc


  • The Partially-Coherent AWGN Channel: Transceiver Strategies for Low-Complexity Fibre Links

    by Hubert Dzieciol, Eric Sillekens, Gabriele Liga, Polina Bayvel, Robert Killey, Domaniç Lavery

    Carrier phase estimation (CPE) is one of the key requirements to perform intradyne coherent detection in optical communication systems. Residual errors in the phase estimation at the receiver, also known as residual phase noise (RPN), follow the so-called Tikhonov distribution. In the digital domain, a channel where the phase has already been estimated by the CPE is generally known as a partially-coherent additive white Gaussian noise (PCAWGN) channel. Herein, we present a joint strategy to modulate and demodulate a 2-dimensional (2D) signal in a PCAWGN channel. Using a low-complexity demapper, we geometrically shape (GS) 8- to 64-arymodulation formats for a PCAWGN channel. Through numerical simulations, we then assess the bit-wise achievable information rates (AIRs) and post forward error correction (FEC) bit error rates (BER) of the presented constellations with the: theoretical optimum model, Euclidean model and the low-complexity PCAWGN model. The resulting constellations are shown to be tolerant to a significant amount of RPN and are therefore applicable to coherent optical communication systems using high linewidth lasers (e.g., > 500 kHz) and/or lower symbol rates. Moreover, we demonstrate that shaped PCAWGN constellations combined with a low-complexity demapper can either significantly relax laser linewidth (LW) or carrier phase estimation (CPE) requirements. Assuming a rate-9/10 LDPC scheme, we demonstrate post-FEC BER shaping gains of up to 2.59 dB and 2.19 dB versus uniform 64QAM and 64-aryconstellations shaped for the purely AWGN channel, respectively.


  • Open Access

    2048-QAM transmission at 15 GBd over 100 km using geometric constellation shaping

    by Yuta Wakayama, Thomas Gerard, Eric Sillekens, Lídia Galdino, Domaniç Lavery, Robert I. Killey, Polina Bayvel

    We experimentally investigated a pilot-aided digital signal processing (DSP) chain in combination with high-order geometric constellation shaping to increase the achievable information rates (AIRs) in standard intradyne coherent transmission systems. We show that the AIR of our system at 15 GBd was maximised using geometrically-shaped (GS) 2048 quadrature amplitude modulation (QAM), reaching 18.0 b/4D-symbol in back-to-back transmission and 16.9 b/4D-symbol after transmission through 100 km of a single-mode fibre after subtracting the pilot overhead (OH). This represents the highest-order GS format demonstrated to date, supporting the highest AIR of any standard intradyne system using conventional optics and 8-bit electronics. Detailed characterisation of the DSP, transceiver performance, and transmission modelling has also been carried out to provide insight into sources of impairments and directions for further improvement.


  • Open Access

    AI-optimised tuneable sources for bandwidth-scalable, sub-nanosecond wavelength switching

    by Thomas Gerard, Christopher Parsonson, Zacharaya Shabka, Benn Thomsen, Polina Bayvel, Domaniç Lavery, Georgios Zervas

    Wavelength routed optical switching promises low power and latency networking for data centres, but requires a wideband wavelength tuneable source (WTS) capable of sub-nanosecond switching at every node. We propose a hybrid WTS that uses time-interleaved tuneable lasers, each gated by a semiconductor optical amplifier, where the performance of each device is optimised using artificial intelligence. Through simulation and experiment we demonstrate record wavelength switch times below 900 ps across 6.05 THz (122×50 GHz) of continuously tuneable optical bandwidth. A method for further bandwidth scaling is evaluated and compared to alternative designs.


  • Geometric Shaping of 2-D Constellations in the Presence of Laser Phase Noise

    by Hubert Dzieciol, Gabriele Liga, Eric Sillekens, Polina Bayvel, Domaniç Lavery

    In this article, we propose a geometric shaping (GS) strategy to design 8, 16, 32, and 64-ary modulation formats for the optical fibre channel impaired by both additive white Gaussian (AWGN) and phase noise. The constellations were optimised to maximise generalised mutual information (GMI) using a mismatched channel model. The presented formats demonstrate an enhanced signal-to-noise ratio (SNR) tolerance in high phase noise regimes when compared with their quadrature amplitude modulation (QAM) or AWGN-optimised counterparts. By putting the optimisation results in the context of the 400ZR implementation agreement, we show that GS alone can either relax the laser linewidth (LW) or carrier phase estimation (CPE) requirements of 400 Gbit/s transmission links and beyond. Following the GMI validation, the performance of the presented formats was examined in terms of post forward error correction (FEC) bit-error-rate (BER) for a soft decision (SD) extended Hamming code (128, 120), implemented as per the 400ZR implementation agreement. We demonstrate gains of up to 1.2 dB when compared to the 64-ary AWGN shaped formats.


  • Optical Fibre Capacity Optimisation via Continuous Bandwidth Amplification and Geometric Shaping

    by Lidia Galdino, Adrian Edwards, Wenting Yi, Eric Sillekens, Yuta Wakayama, Thomas Gerard, Wayne Sheldon Pelouch, Stuart Barnes, Takehiro Tsuritani, Robert I. Killey, et al.

    The maximum data throughput in a single mode optical fibre is a function of both the signal bandwidth and the wavelength-dependent signal-to-noise ratio (SNR). In this paper, we investigate the use of hybrid discrete Raman & rare-earth doped fibre amplifiers to enable wide-band signal gain, without spectral gaps between amplification bands. We describe the widest continuous coherent transmission bandwidth experimentally demonstrated to date of 16.83 THz, achieved by simultaneously using the S-, C-and L-bands. The variation of fibre parameters over this bandwidth, together with the hybrid amplification method result in a significant SNR wavelength-dependence. To cope with this, the signal was optimised for each SNR, wavelength and transmission band. By using a system-tailored set of geometrically shaped constellations, we demonstrate the transmission of 660×25 GBd channels over 40 km, resulting in a record single mode fibre net throughput of 178.08 Tbit/s.