Yuqiang Zeng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yuqiang Zeng has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Amy Marconnet
School of Materials Engineering, Purdue University, West Lafayette, USA
3 shared publications - Ravi Prasher
Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
3 shared publications - Bilu Liu
Institute of Materials Research, Tsinghua Shenzhen International Graduate School
2 shared publications - Divya Chalise
Energy Storage and Distributed Resources Division, Lawrence Berkeley National Laboratory, Berkeley, USA
2 shared publications Hailong Wang
School of Chemical Engineering, Sichuan University, Chengdu, China
2 shared publications- Jie Li
Department of Energy, Politecnico di Milano, Via Lambruschini, 4, Milan 20156, Italy
2 shared publications
Latest Publications
- 2 September 2024
- Published by Springer Nature in Nature Nanotechnology
- Vol. 19 (12) , 1821-1830
Revealing the degradation pathways of layered Li-rich oxide cathodes
Layered lithium-rich transition metal oxides are promising cathode candidates for high-energy-density lithium batteries due to the redox contributions from transition metal cations and oxygen anions. However, their practical application is hindered by gradual capacity fading and voltage decay. Although oxygen loss and phase transformation are recognized as primary factors, the structural deterioration, chemical rearrangement, kinetic and thermodynamic effects remain unclear. Here we integrate analysis of morphological, structural and oxidation state evolution from individual atoms to secondary particles. By performing nanoscale to microscale characterizations, distinct structural change pathways associated with intraparticle heterogeneous reactions are identified. The high level of oxygen defects formed throughout the particle by slow electrochemical activation triggers progressive phase transformation and the formation of nanovoids. Ultrafast lithium (de)intercalation leads to oxygen-distortion-dominated lattice displacement, transition metal ion dissolution and lithium site variation. These inhomogeneous and irreversible structural changes are responsible for the low initial Coulombic efficiency, and ongoing particle cracking and expansion in the subsequent cycles.
- 2 September 2024
- Published by Springer Nature in Nature Nanotechnology
- Vol. 19 (12) , 1821-1830
Revealing the degradation pathways of layered Li-rich oxide cathodes
Layered lithium-rich transition metal oxides are promising cathode candidates for high-energy-density lithium batteries due to the redox contributions from transition metal cations and oxygen anions. However, their practical application is hindered by gradual capacity fading and voltage decay. Although oxygen loss and phase transformation are recognized as primary factors, the structural deterioration, chemical rearrangement, kinetic and thermodynamic effects remain unclear. Here we integrate analysis of morphological, structural and oxidation state evolution from individual atoms to secondary particles. By performing nanoscale to microscale characterizations, distinct structural change pathways associated with intraparticle heterogeneous reactions are identified. The high level of oxygen defects formed throughout the particle by slow electrochemical activation triggers progressive phase transformation and the formation of nanovoids. Ultrafast lithium (de)intercalation leads to oxygen-distortion-dominated lattice displacement, transition metal ion dissolution and lithium site variation. These inhomogeneous and irreversible structural changes are responsible for the low initial Coulombic efficiency, and ongoing particle cracking and expansion in the subsequent cycles.
- Open Access
- 11 December 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-9
Nonintrusive thermal-wave sensor for operando quantification of degradation in commercial batteries
Monitoring real-world battery degradation is crucial for the widespread application of batteries in different scenarios. However, acquiring quantitative degradation information in operating commercial cells is challenging due to the complex, embedded, and/or qualitative nature of most existing sensing techniques. This process is essentially limited by the type of signals used for detection. Here, we report the use of effective battery thermal conductivity (keff) as a quantitative indicator of battery degradation by leveraging the strong dependence of keff on battery-structure changes. A measurement scheme based on attachable thermal-wave sensors is developed for non-embedded detection and quantitative assessment. A proof-of-concept study of battery degradation during fast charging demonstrates that the amount of lithium plating and electrolyte consumption associated with the side reactions on the graphite anode and deposited lithium can be quantitatively distinguished using our method. Therefore, this work opens the door to the quantitative evaluation of battery degradation using simple non-embedded thermal-wave sensors.
- 11 December 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-9
Open AccessNonintrusive thermal-wave sensor for operando quantification of degradation in commercial batteries
Monitoring real-world battery degradation is crucial for the widespread application of batteries in different scenarios. However, acquiring quantitative degradation information in operating commercial cells is challenging due to the complex, embedded, and/or qualitative nature of most existing sensing techniques. This process is essentially limited by the type of signals used for detection. Here, we report the use of effective battery thermal conductivity (keff) as a quantitative indicator of battery degradation by leveraging the strong dependence of keff on battery-structure changes. A measurement scheme based on attachable thermal-wave sensors is developed for non-embedded detection and quantitative assessment. A proof-of-concept study of battery degradation during fast charging demonstrates that the amount of lithium plating and electrolyte consumption associated with the side reactions on the graphite anode and deposited lithium can be quantitatively distinguished using our method. Therefore, this work opens the door to the quantitative evaluation of battery degradation using simple non-embedded thermal-wave sensors.
- Open Access
- 2 August 2023
- Published by Springer Nature in Research Square
Revealing the degradation pathways of layered Li-rich oxide cathodes
Layered Li-rich transition metal oxides (LRTMO) are one of the most promising cathode candidates for high energy density lithium batteries due to the redox contributions from transition metal (TM) cations and oxygen (O) anion. However, their practical application is hindered by gradual capacity fading and voltage decay. Although oxygen loss and phase transformation have been widely recognized as primary factors for these drawbacks, the structural deterioration and chemical rearrangement of LRTMO during battery operations, and the kinetic and thermodynamic evolution, remain unclear. Herein, we comprehensively investigate the morphological, structural, and oxidation state evolutions from the individual atoms to secondary particles. By means of nano- to micro-scale characterizations, distinct structural changing pathways associated with different intra-particle heterogeneous reactions are identified. Substantial O-defects are formed through the particle by slow electrochemical activation, accompanied with oxygen release triggering progressive phase transformation on surface and formation of nano-voids in bulk. The ultra-fast heterogeneous Li- (de)intercalation often leads to O-distortion dominated lattice displacement, TM-ions dissolution, and Li-sites variation. These inhomogeneous and irreversible structural changes are responsible for first-cycle Coulombic inefficiency, and ongoing particle cracking and expansion in the following cycles.
- 2 August 2023
- Published by Springer Nature in Research Square
Open AccessRevealing the degradation pathways of layered Li-rich oxide cathodes
Layered Li-rich transition metal oxides (LRTMO) are one of the most promising cathode candidates for high energy density lithium batteries due to the redox contributions from transition metal (TM) cations and oxygen (O) anion. However, their practical application is hindered by gradual capacity fading and voltage decay. Although oxygen loss and phase transformation have been widely recognized as primary factors for these drawbacks, the structural deterioration and chemical rearrangement of LRTMO during battery operations, and the kinetic and thermodynamic evolution, remain unclear. Herein, we comprehensively investigate the morphological, structural, and oxidation state evolutions from the individual atoms to secondary particles. By means of nano- to micro-scale characterizations, distinct structural changing pathways associated with different intra-particle heterogeneous reactions are identified. Substantial O-defects are formed through the particle by slow electrochemical activation, accompanied with oxygen release triggering progressive phase transformation on surface and formation of nano-voids in bulk. The ultra-fast heterogeneous Li- (de)intercalation often leads to O-distortion dominated lattice displacement, TM-ions dissolution, and Li-sites variation. These inhomogeneous and irreversible structural changes are responsible for first-cycle Coulombic inefficiency, and ongoing particle cracking and expansion in the following cycles.
- Open Access
- 23 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (13) , 17344-17352
Using Thermal Interface Resistance for Noninvasive Operando Mapping of Buried Interfacial Lithium Morphology in Solid-State Batteries
The lithium metal-solid-state electrolyte interface plays a critical role in the performance of solid-state batteries. However, operando characterization of the buried interface morphology in solid-state cells is particularly difficult because of the lack of direct optical access. Destructive techniques that require isolating the interface inadvertently modify the interface and cannot be used for operando monitoring. In this work, we introduce the concept of thermal wave sensing using modified 3ω sensors that are attached to the outside of the lithium metal-solid-state cells to noninvasively probe the morphology of the lithium metal-electrolyte interface. We show that the thermal interface resistance measured by the 3ω sensors relates directly to the physical morphology of the interface and demonstrates that 3ω thermal wave sensing can be used for noninvasive operando monitoring the morphology evolution of the lithium metal-solid-state electrolyte interface.
- 23 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (13) , 17344-17352
Open AccessUsing Thermal Interface Resistance for Noninvasive Operando Mapping of Buried Interfacial Lithium Morphology in Solid-State Batteries
The lithium metal-solid-state electrolyte interface plays a critical role in the performance of solid-state batteries. However, operando characterization of the buried interface morphology in solid-state cells is particularly difficult because of the lack of direct optical access. Destructive techniques that require isolating the interface inadvertently modify the interface and cannot be used for operando monitoring. In this work, we introduce the concept of thermal wave sensing using modified 3ω sensors that are attached to the outside of the lithium metal-solid-state cells to noninvasively probe the morphology of the lithium metal-electrolyte interface. We show that the thermal interface resistance measured by the 3ω sensors relates directly to the physical morphology of the interface and demonstrates that 3ω thermal wave sensing can be used for noninvasive operando monitoring the morphology evolution of the lithium metal-solid-state electrolyte interface.
- Open Access
- 24 June 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-7
High thermoelectric figure of merit of porous Si nanowires from 300 to 700 K
Thermoelectrics operating at high temperature can cost-effectively convert waste heat and compete with other zero-carbon technologies. Among different high-temperature thermoelectrics materials, silicon nanowires possess the combined attributes of cost effectiveness and mature manufacturing infrastructures. Despite significant breakthroughs in silicon nanowires based thermoelectrics for waste heat conversion, the figure of merit (ZT) or operating temperature has remained low. Here, we report the synthesis of large-area, wafer-scale arrays of porous silicon nanowires with ultra-thin Si crystallite size of ~4 nm. Concurrent measurements of thermal conductivity (κ), electrical conductivity (σ), and Seebeck coefficient (S) on the same nanowire show a ZT of 0.71 at 700 K, which is more than ~18 times higher than bulk Si. This ZT value is more than two times higher than any nanostructured Si-based thermoelectrics reported in the literature at 700 K. Experimental data and theoretical modeling demonstrate that this work has the potential to achieve a ZT of ~1 at 1000 K.
- 24 June 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-7
Open AccessHigh thermoelectric figure of merit of porous Si nanowires from 300 to 700 K
Thermoelectrics operating at high temperature can cost-effectively convert waste heat and compete with other zero-carbon technologies. Among different high-temperature thermoelectrics materials, silicon nanowires possess the combined attributes of cost effectiveness and mature manufacturing infrastructures. Despite significant breakthroughs in silicon nanowires based thermoelectrics for waste heat conversion, the figure of merit (ZT) or operating temperature has remained low. Here, we report the synthesis of large-area, wafer-scale arrays of porous silicon nanowires with ultra-thin Si crystallite size of ~4 nm. Concurrent measurements of thermal conductivity (κ), electrical conductivity (σ), and Seebeck coefficient (S) on the same nanowire show a ZT of 0.71 at 700 K, which is more than ~18 times higher than bulk Si. This ZT value is more than two times higher than any nanostructured Si-based thermoelectrics reported in the literature at 700 K. Experimental data and theoretical modeling demonstrate that this work has the potential to achieve a ZT of ~1 at 1000 K.
- 14 May 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (27)
Thermally Conductive Reduced Graphene Oxide Thin Films for Extreme Temperature Sensors
Reduced graphene oxide (RGO) films are promising in applications ranging from electronics to flexible sensors. Though high electrical and thermal conductivities have been reported for RGO films, existing thermal conductivity data for RGO films show large variations from 30 to 2600 W m−1 K−1. Further, there is a lack of data at low temperatures (−1 K−1 with increasing annealing temperature from 1000 to 3000 K with a corresponding increase in the electrical conductivity from 5.2 to 1481.0 S cm−1. In addition, films reduced at 3000 K are promising for sensing extreme temperatures as demonstrated through the measured electrical resistivity from 10 to 3000 K. Sensors based on RGO films are advantageous over conventional temperature sensors due to the wide temperature range and flexibility. Thus, this material is useful in many applications including flexible electronics and thermal management systems.
- 14 May 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (27)
Thermally Conductive Reduced Graphene Oxide Thin Films for Extreme Temperature Sensors
Reduced graphene oxide (RGO) films are promising in applications ranging from electronics to flexible sensors. Though high electrical and thermal conductivities have been reported for RGO films, existing thermal conductivity data for RGO films show large variations from 30 to 2600 W m−1 K−1. Further, there is a lack of data at low temperatures (−1 K−1 with increasing annealing temperature from 1000 to 3000 K with a corresponding increase in the electrical conductivity from 5.2 to 1481.0 S cm−1. In addition, films reduced at 3000 K are promising for sensing extreme temperatures as demonstrated through the measured electrical resistivity from 10 to 3000 K. Sensors based on RGO films are advantageous over conventional temperature sensors due to the wide temperature range and flexibility. Thus, this material is useful in many applications including flexible electronics and thermal management systems.
- 16 January 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (3) , 034301
Reevaluating the suppression function for phonon transport in nanostructures by Monte Carlo techniques
Thermal conductivity integral models including a suppression function to account for boundary scattering have had considerable success in explaining and predicting the thermal conductivity of nanostructures. However, the suppression function is analytically defined only for some simple structures, e.g., thin films and nanowires. For arbitrary nanostructures, Monte Carlo (MC)-based methods have been developed to calculate the suppression function. Here, we focus on two main types of MC-based methods: path sampling methods and ray tracing simulations. For the path sampling method, a more computationally efficient sampling algorithm is proposed based on the analytical solution of the average distance phonons can travel before a collision. The physical meaning of the path sampling method is rigorously given for the first time by comparing to the analytical solution of the Boltzmann Transport Equation for symmetric structures. Several limitations of the path sampling method are discussed based on assumptions in the derivation. Ray tracing simulations are well defined when a converged boundary mean free path (MFP) can be found. However, convergence is not guaranteed for arbitrary structures. More generally, we propose a modified formula to approximate the full-range suppression function with a characteristic length, which is determined by fitting to the calculated suppression function at selected MFPs. Ultimately, the accuracy of each calculated suppression function is evaluated by comparing the calculated thermal conductivity accumulation function for nanostructures including thin films, nanowires, and anisotropic modulated nanostructures. Our results provide guidance for selecting the appropriate techniques for calculating the suppression function and predicting the thermal conductivity of nanostructures.
- 16 January 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (3) , 034301
Reevaluating the suppression function for phonon transport in nanostructures by Monte Carlo techniques
Thermal conductivity integral models including a suppression function to account for boundary scattering have had considerable success in explaining and predicting the thermal conductivity of nanostructures. However, the suppression function is analytically defined only for some simple structures, e.g., thin films and nanowires. For arbitrary nanostructures, Monte Carlo (MC)-based methods have been developed to calculate the suppression function. Here, we focus on two main types of MC-based methods: path sampling methods and ray tracing simulations. For the path sampling method, a more computationally efficient sampling algorithm is proposed based on the analytical solution of the average distance phonons can travel before a collision. The physical meaning of the path sampling method is rigorously given for the first time by comparing to the analytical solution of the Boltzmann Transport Equation for symmetric structures. Several limitations of the path sampling method are discussed based on assumptions in the derivation. Ray tracing simulations are well defined when a converged boundary mean free path (MFP) can be found. However, convergence is not guaranteed for arbitrary structures. More generally, we propose a modified formula to approximate the full-range suppression function with a characteristic length, which is determined by fitting to the calculated suppression function at selected MFPs. Ultimately, the accuracy of each calculated suppression function is evaluated by comparing the calculated thermal conductivity accumulation function for nanostructures including thin films, nanowires, and anisotropic modulated nanostructures. Our results provide guidance for selecting the appropriate techniques for calculating the suppression function and predicting the thermal conductivity of nanostructures.
- 1 July 2012
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 55 (15-16) , 4469-4475
Integrated study of lead iodide crystal growth and doping processes
- 1 July 2012
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 55 (15-16) , 4469-4475
Integrated study of lead iodide crystal growth and doping processes