HLHong-Seok Lee

Hong-Seok Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hong-Seok Lee has a total of 117 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Achromatic beam deflector with electrodynamic phased arrays

    by Jungkwuen An, Young Kim, Yunhee Kim, Hoon Song, Chunghwan Jung, Kanghee Won, Junsuk Rho, Hong-Seok Lee

    Since flat optics has the feature to implement a compact system, they are widely used in various applications to replace bulky refractive optics. However, they suffer from chromatic aberrations due to dispersion, limiting their effectiveness to a narrow wavelength range. Consequently, diffractive optics has been applied for dynamic beam steering within a specific wavelength region or for static steering across multiple wavelengths. This limitation has made it challenging to implement dynamic beam steering in full-color display applications. To address this issue, we developed a multi-wavelength-based optical architecture that mitigates chromatic aberrations. This system incorporates color-selective retarders, half-wave plates, polarization plates, and beam deflectors. We experimentally demonstrated an achromatic beam deflector using a dynamic phase array in transmission mode, achieving continuous tunable beam steering over multiple wavelengths at 460, 520, and 638 nm.


  • Top Cited Papers

    Voltage-Tunable Multifunctional Zoom Imaging Metalenses

    by Melissa Bosch, Maxim Shcherbakov, Kanghee Won, Hong-Seok Lee, Young Kim, Gennady Shvets


  • Open Access

    Direct amplitude-only hologram realized by broken symmetry

    by Daeho Yang, Hong-Seok Lee

    Holographic displays have been a long-standing ambition for decades to realize true-to-life reconstruction. However, their practical adoption is hindered by their subpar image quality compared to two-dimensional displays, which is fundamentally limited by restricted spatial frequency bandwidth and artifacts. We address the limitation by using a symmetry-broken amplitude-only spatial light modulator, demonstrating image quality comparable to that of two-dimensional displays. The broken conjugate symmetry induced by phase noise of modulators eliminates conjugate image that causes issues in amplitude-only holograms and allows direct reconstruction without additional optical elements. The proposed method provides enhanced robustness against artifacts caused by sub-pixel structures of modulators, enabling experimental reconstruction of high-quality holograms. The full bandwidth and the robustness result in a 5-decibel improvement in peak signal-to-noise ratio compared to state-of-the-art holograms. Furthermore, the hologram has 24 times higher optical efficiency and a smaller volume than the traditional amplitude-only holograms while real-time synthesis is enabled by using a neural network.


  • Open Access

    Single‐Panel Complex Holographic Display with Three‐Phase Covalent Macropixel

    by Yunhee Kim, Jonghyun Lee, Sehwan Na, Hoon Song, Soobin Kim, Hyeonseung Yu, Jungkwon Ahn, Chilseong Choi, Hongsuk Kim, Hong‐Seok Lee, et al.

    A single‐panel complex holographic display with a three‐phase covalent macropixel featuring ultralow noise and high‐efficiency 3D image generation is proposed. The essential feature of the proposed three‐phase covalent macropixel is the point‐symmetric covalent concatenation of sub‐pixels and an adaptive computer‐generated hologram encoding algorithm. The proposed single‐panel holographic display exhibits three times signal efficiency enhancement, 1/38 reduction of DC noise, and 1/50 reduction of conjugate noise compared to conventional holographic displays in the generation of full‐color computer‐generated hologram images. This noise reduction leads to three times the optical efficiency enhancement of holographic displays.


  • Open Access

    Deep learning-based incoherent holographic camera enabling acquisition of real-world holograms for holographic streaming system

    by Hyeonseung Yu, Youngrok Kim, Daeho Yang, Wontaek Seo, Yunhee Kim, Jong-Young Hong, Hoon Song, Geeyoung Sung, Younghun Sung, Sung-Wook Min, et al.

    While recent research has shown that holographic displays can represent photorealistic 3D holograms in real time, the difficulty in acquiring high-quality real-world holograms has limited the realization of holographic streaming systems. Incoherent holographic cameras, which record holograms under daylight conditions, are suitable candidates for real-world acquisition, as they prevent the safety issues associated with the use of lasers; however, these cameras are hindered by severe noise due to the optical imperfections of such systems. In this work, we develop a deep learning-based incoherent holographic camera system that can deliver visually enhanced holograms in real time. A neural network filters the noise in the captured holograms, maintaining a complex-valued hologram format throughout the whole process. Enabled by the computational efficiency of the proposed filtering strategy, we demonstrate a holographic streaming system integrating a holographic camera and holographic display, with the aim of developing the ultimate holographic ecosystem of the future.


  • Open Access

    The knight of holographic displays

    by YongKeun Park, Jae-Hyeung Park, Hwi Kim, Hong-Seok Lee, Yoshio Hayasaki, Ting-Chung Poon


  • Top Cited Papers
    Open Access

    Diffraction-engineered holography: Beyond the depth representation limit of holographic displays

    by Daeho Yang, Wontaek Seo, Hyeonseung Yu, Sun Il Kim, Bongsu Shin, Chang-Kun Lee, Seokil Moon, Jungkwuen An, Jong-Young Hong, Geeyoung Sung, et al.

    Holography is one of the most prominent approaches to realize true-to-life reconstructions of objects. However, owing to the limited resolution of spatial light modulators compared to static holograms, reconstructed objects exhibit various coherent properties, such as content-dependent defocus blur and interference-induced noise. The coherent properties severely distort depth perception, the core of holographic displays to realize 3D scenes beyond 2D displays. Here, we propose a hologram that imitates defocus blur of incoherent light by engineering diffracted pattern of coherent light with adopting multi-plane holography, thereby offering real world-like defocus blur and photorealistic reconstruction. The proposed hologram is synthesized by optimizing a wave field to reconstruct numerous varifocal images after propagating the corresponding focal distances where the varifocal images are rendered using a physically-based renderer. Moreover, to reduce the computational costs associated with rendering and optimizing, we also demonstrate a network-based synthetic method that requires only an RGB-D image.


  • Open Access

    Actuating compact wearable augmented reality devices by multifunctional artificial muscle

    by Dongjin Kim, Baekgyeom Kim, Bongsu Shin, Dongwook Shin, Chang-Kun Lee, Jae-Seung Chung, Juwon Seo, Yun-Tae Kim, Geeyoung Sung, Wontaek Seo, et al.

    An artificial muscle actuator resolves practical engineering problems in compact wearable devices, which are limited to conventional actuators such as electromagnetic actuators. Abstracting the fundamental advantages of an artificial muscle actuator provides a small-scale, high-power actuating system with a sensing capability for developing varifocal augmented reality glasses and naturally fit haptic gloves. Here, we design a shape memory alloy-based lightweight and high-power artificial muscle actuator, the so-called compliant amplified shape memory alloy actuator. Despite its light weight (0.22 g), the actuator has a high power density of 1.7 kW/kg, an actuation strain of 300% under 80 g of external payload. We show how the actuator enables image depth control and an immersive tactile response in the form of augmented reality glasses and two-way communication haptic gloves whose thin form factor and high power density can hardly be achieved by conventional actuators.


  • Open Access

    Towards holographic streaming systems: From real-time acquisition of the real world to holographic display

    by Hyeonseung Yu, Youngrok Kim, Daeho Yang, Wontaek Seo, Yunhee Kim, Jong-Young Hong, Hoon Song, Geeyoung Sung, Younghun Sung, Sung-Wook Min, et al.

    While recent progress in holographic displays has shown that they are capable of displaying photorealistic 3D holograms in real time, the acquisition of high-quality real-world holograms has remained a missing piece regarding the realization of holographic streaming systems. Incoherent holographic cameras, which record holograms under daylight conditions, are suitable candidates for real-world acquisition, as they avoid the safety issue involved in the use of laser lights; however, they are hindered by severe noise due to the optical imperfections of such systems. In this work, we develop a deep learning-based incoherent holographic camera system that can deliver visually enhanced holograms in real time. A neural network filters the noise in the captured holograms, maintaining a complex-valued hologram format throughout the whole process. Enabled by the computational efficiency of the proposed filtering strategy, we demonstrate the first holographic streaming system integrating a holographic camera and a holographic display, with the aim of developing the ultimate holographic ecosystem of the future.

  • Open Access

    Optimization of Optical Phase Profile in Beam Deflector with Advanced Simulation Method for High Diffraction Efficiency

    by Andrey Manko, Young Kim, Aleksander Morozov, Serguei Palto, Kanghee Won, Hong-Seok Lee

    Controlling the phase of light with a high efficiency and precision is essential for applications in imaging, tunable devices, and optical systems. Spatial light modulators (SLMs) based on liquid crystals (LCs) have been regarded as one of the best choices for the generation of phase profiles for the steering of light. The upper glass substrate has an unpatterned electrode for a common electrode, while the lower glass substrate has one-dimensional micro-patterned electrodes for controlling the single pixel level by the applied voltages. By applying different voltages to each electrode to create a sawtooth-shaped phase profile, the collimated input beam is deflected to the desired angle. To maximize the diffraction efficiency (DE) values, an advanced simulation method has been developed to find the optimized phase profile through the analysis of LC director distributions. The resulting diffraction patterns are investigated both computationally and experimentally, with a good agreement between the results obtained. Finally, the beam deflector (BD) system with an advanced driving algorithm has a high 1st order DE, about 60%, 37%, and 7.5% at 1°, 2.5°, and a maximum steering angle of 7.5°, respectively. The LC director distributions in relation to various diffraction angles are simulated and an experimental success in realizing enhanced DE for the beam steering device is presented.