Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Slawomir Kocon has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Multinotch FIR Filter Based on a Stable IIR Filter Prototype with Improved Dynamic Performance via Iterative Determination of Nonzero Initial Conditions Using Vector Projection

    by Sławomir Kocoń, Jacek Piskorowski

    In many cases, the removal of individual frequency components from a signal spectrum is achieved using notch and multinotch filters. One of the main disadvantages of such filters is the occurrence of transient states, which depend, among other factors, on the filter order and selectivity, i.e., the bandwidth of the stopband. In this paper, the authors present a method for synthesizing a finite impulse response (FIR) multinotch filter based on a prototype infinite impulse response (IIR) notch filter. The proposed approach is characterized by a significant reduction in the influence of transient effects on the filter response, achieved through the iterative determination of nonzero initial conditions. This allows the dynamic performance of the filter to be improved without compromising its frequency response. Furthermore, the proposed filter structure is characterized by having a lower filter order than conventional filtering structures while maintaining satisfactory filtration quality. To demonstrate the properties of the proposed structure, computer simulations were performed and filtration quality metrics were evaluated. The obtained results indicate that the proposed structure outperforms classical filtering methods by ensuring faster stabilization of the response during the transient state. Moreover, it was demonstrated that the proposed method of reducing the FIR filter order has only a minor effect on filtration quality.

  • Open Access

    Determination of Non-Zero Initial Conditions for IIR Notch Filters Using the Vector Projection Method with Minimum Delay

    by Sławomir Kocoń, Jacek Piskorowski

    In this paper, two approaches to determining the non-zero initial conditions for the difference equation of notch filters are proposed and analyzed. The vector of non-zero initial conditions is determined to reduce the transient of the considered IIR notch filters. Both presented approaches are based on the vector projection method. The first method is based on the iterative determination of the vectors of initial conditions using samples available at a given moment. The main goal of the second approach is to reduce the computational cost compared to the first method with a slight deterioration in the quality of filtration. In order to demonstrate the suitability of the proposed methods, they have been used in simulation studies of power line interference filtering from disturbed ECG signals. The use of the proposed methods allowed for a significant reduction of the transient in the filter response with a shorter delay than in the classical vector projection method.


  • Power Line Interference Removal From Short-Latency Evoked Potentials Using Digital Time-Efficient Selective Elliptic Notch Filter

    by Slawomir Kocon, Jacek Piskorowski

    In the paper, a concept of digital time-efficient IIR elliptic notch filters with a reduced transient response is presented. The proposed notch filter is designed to effectively suppress power line interferences from short-latency evoked potentials. Desired time-domain properties of the considered filter have been achieved through a time-varying stop-band width and non-zero initial values of the filter. The designed filter has been verified with the use of the brainstem auditory evoked potential (BAEP) corrupted by the power line noise. The results of simulations and performance indices prove that the proposed parameter-varying elliptic notch filter with non-zero initial values is definitely more effective in removing the power line interference than commonly used time-invariant filters with zero initial values.


  • Short Transient IIR Multinotch Filter With Time-Varying Parameters and Nonzero Initial Conditions

    by Slawomir Kocon, Jacek Piskorowski

    In this article, an analytical concept and hardware verification of the time-varying infinite impulse response narrow multiband-stop filter with nonzero initial conditions are presented. The time variability of the filter parameters and nonzero initial conditions are introduced to the filter structure in order to reduce its transient response. Such a filter can be very useful in various measurement systems. In particular, short transient filters are very desirable for processing signals whose initial part is of great importance. In this article, the algorithm for finding the length of the initial conditions vector is presented. As an example, the proposed IIR multinotch filter is used for removing power-line interferences from the ECG signal. Computer simulations, hardware verification, and performance indices demonstrate that the proposed time-varying IIR multinotch filter with nonzero initial conditions possesses much better properties than the traditional time-invariant filter with zero initial conditions.


  • Open Access

    Time-Varying IIR Notch Filter with Reduced Transient Response Based on the Bézier Curve Pole Radius Variability

    by Sławomir Kocoń, Jacek Piskorowski

    In this paper a concept of the second order digital infinite impulse response narrow band-reject filter with reduced transient response is proposed. In order to suppress the transient response of the considered infinite impulse response (IIR) notch filter its pole radius is temporarily varied in time using the Bézier parametric curve. Computer simulations verifying the effectiveness of the proposed pole-radius-varying notch filter are presented and compared to the performance of the traditional time-invariant filter using ECG signals distorted by unwanted powerline interference.


  • Linear Time-Varying Multi-Notch FIR Filter for Fast EMG Measurements

    by Piotr Okoniewski, Slawomir Kocon, Jacek Piskorowski

    This paper presents a concept of implementing time-varying FIR narrow multi-band-stop filter for fast EMG measurements. The proposed system consists of a notch type filter with predefined time-varying coefficients and an IMU-based trigger to start the measurement of the muscle movement. The coefficients of the proposed filter are calculated according to the defined function in the selected time span. The use of an external trigger, which signals the moment of the muscle movement, allows to use the time-varying filter not only in the beginning of the measurement but also further during the test. The paper is an extension of the previous research in the field of time-varying filtering structures.

  • Allpass Based Multi-Notch IIR Filter with Equalized Group Delay

    by Piotr Okoniewski, Slawomir Kocon, Jacek Piskorowski

    This paper presents a concept of time-varying IIR multi-band-stop filter with equalized group delay characteristic in the steady state. The ECG signal is used to test the proposed structure. As the group delay equalizer we used the constrained Newton-type algorithm provided by Matlab. To confirm the robustness of the proposed solutions we also present the experimental results with the aid of noise frequency estimator.


  • Design of stable LTV multi-notch IIR filter with Lookup Tables

    by Piotr Okoniewski, Slawomir Kocon, Jacek Piskorowski

    The paper presents a concept of designing a stable time-varying IIR narrow multi-band-stop filter. The proposed structure is based on an all-pass prototype. The stability analysis of the time-varying design is presented. In order to reduce the transient time, the varying rejection bandwidth in time is introduced. The paper also presents the idea of the LUT's (Lookup Table) to control the memory usage of the time-varying filtering structure. The results of the methodology are presented and compared with the stationary counterpart. The proposed stable time-varying filtering structure is applied to the noised test signal in the simulation environment.

  • Experimental results of stable time-varying multi-notch filter

    by Slawomir Kocon, Piotr Okoniewski, Jacek Piskorowski

    This paper presents experimental results of a stable time-varying IIR narrow multi-band-stop filter. The design and stability check procedures have been shown. The experimental hardware used to conduct the measurement of the ECG was presented. The concept of the time-varying coefficients was used in order to reduce the transient time of the filtering structure. The advantages of the proposed methodology were confirmed with three test cases focused on denoising the input signal.


  • Implementation of non-zero initial conditions for multi-notch FIR filter using raspberry Pi

    by Slawomir Kocon, Jacek Piskorowski

    In this paper a concept of finite impulse response narrow multi-band-stop filter with non-zero initial conditions based on linear Kalman prototype filter is proposed. The FIR multi-notch filter is used for removing power-line interferences from biomedical sources such as ECG. In order to reduce the duration of the transient state of the proposed FIR multi-notch filter, optimal initial conditions for the filter have been determined. The algorithm for finding the length of the initial conditions vector is presented. The proposed filter is tested using sinusoidal and ECG signals. Computer simulations, hardware implementation, and performance indices demonstrate that the proposed FIR multi-notch filter with non-zero initial conditions based on the Kalman prototype filter possesses better properties than the traditional FIR multi-notch filter.