JRJi Yeon Ryu

Ji Yeon Ryu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ji Yeon Ryu has a total of 227 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Volatile Heteroleptic Molybdenum Complexes: Synthesis, Structure, and Thermal Properties

    by Sung Kwang Lee, Ji Yeon Ryu, Bo Keun Park, Seung Uk Son, Taek-Mo Chung

    Molybdenum (Mo)-based thin films are widely applied in microelectronics and catalysis due to their electrical and thermal advantages. The development of suitable precursors for deposition of high-quality thin film is important. To resolve the problems of Mo(CO)6, we tried to dissociate carbonyl groups and introduce multidentate organic ligands. Mo(η3-allyl)(CO)2(MeCN)2Cl was used as a starting material to dissociate 4 CO groups from Mo(CO)6. We introduced tridentate-NNO ligands to dissociate a chloride and 2 MeCN. Finally, we synthesized new molybdenum complexes that can be expected to overcome the disadvantages owing to the carbonyl groups in Mo(CO)6. New heteroleptic molybdenum complexes, Mo(allyl)(CO)2(demamp) (1), Mo(allyl)(CO)2(demap) (2), Mo(allyl)(CO)2(demab) (3), Mo(crotyl)(CO)2(demamp) (4), Mo(allyl)(CO)2(demavp) (5), Mo(allyl)(CO)2(demaep) (6), and Mo(methallyl)(CO)2(demamp) (7), were synthesized by reactions of Mo(allyl)(CO)2(MeCN)2Cl with sodium salt of tridentate-NNO ligands in THF. Synthesized complexes were characterized by Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), and single crystal X-ray diffraction. Thermal properties were investigated by thermogravimetric analysis (TGA). Especially, vapor pressure analysis was conducted to determine the vapor pressure of complex 4. We are sure that complex 4 is a potential candidate to apply as vapor-phase deposition precursor for molybdenum-containing thin films.

  • Molecular Insights into Oxime-Containing Group 4 Transition Metal Precursors for Atomic Layer Deposition

    by Seungjin Song, Ji Woon Choi, Sung Kwang Lee, Bo Keun Park, Ji Yeon Ryu, Junseong Lee, Taek-Mo Chung

    In this article, we synthesized six organometallic precursors possessing oxime ligands, tert-butyl methyl ketone oxime (tmoxH), as potential precursors for atomic layer deposition (ALD). Homoleptic complexes, Ti(tmox)4 (1), [Zr(tmox)4]2 (2), and [Hf(tmox)4]2 (3), and cyclopentadienyl (Cp)-functionalized heteroleptic complexes, CpTi(tmox)3 (4), CpZr(tmox)3 (5), and CpHf(tmox)3 (6) were characterized through nuclear magnetic resonance (NMR), Fourier-transform IR spectroscopy (FT-IR), and single-crystal X-ray diffraction (SC-XRD). Thermogravimetric analysis was conducted to evaluate the thermostability of the newly synthesized complexes for ALD applications as metal precursors. Furthermore, ALD studies revealed that CpZr(tmox)3 is a potential precursor that can modulate defect density and phase structure of thin films by controlling the deposition temperature. We also compared the ALD behaviors between amidoxime complexes and oxime complexes and observed the functional group effects on surface adsorption.

  • InGaP Alloyed Quantum Dots Enabled by Rational Indium Precursor Design for Light-Emitting Diodes

    by Calem Duah, Ji-Seoung Jeong, Sun-Gi Choi, Hwanhui Yun, Taesu Kim, Bo Keun Park, Su Yeon Lee, Ji Yeon Ryu, Seon Joo Lee

  • Controlling the Hole Injection Dynamics of Hole-Transporting Polymers for Efficient Quantum Dot Light-Emitting Diodes

    by San Seomun, Sun-Gi Choi, Ji Yeon Ryu, In Kim, Hyuna Kim, Han-Hee Cho, Youngmin Choi, Sungmook Jung, Tae Yeon Kim, Nuri Oh, et al.

    State-of-the-art quantum dot light-emitting diodes (QD-LEDs) have largely relied on poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,4'-(N-(4-sec-butylphenyl))diphenylamine)] (TFB) as the hole transport layer (HTL). However, the relatively high highest occupied molecular orbital (HOMO) energy level of the TFB hinders hole transfer into emitting layers (EMLs). In this study, we introduce fluorine (F) as a weak electron-withdrawing group (EWG) and the cyano group (CN) as a strong EWG into triphenylamine units of TFB to reduce the energy offset between HTLs and EMLs. Fluorination selectively downshifts HOMO energy levels and slightly improves the hole mobility of the TFB derivatives, leading to a significant enhancement of the external quantum efficiencies (EQEs) in red-emissive CdSe and blue-emissive ZnSe QD-LEDs. Specifically, using difluorinated TFB (2F-TFB) as HTLs in the red and blue QD-LED devices improves EQE to 17.4% and 10.6%, compared to the conventional TFB-based devices with EQEs of 13.3% and 5.0%, respectively. However, the devices with the TFB derivative incorporating CN (CN-TFB) show poor EQEs of 8.1% and 0.5% for the red and blue devices, respectively, due to the reduced hole mobility of CN-TFB and, in the blue devices, to enhanced electron leakage from the EMLs into the HTLs. The results show that beyond deepening the HTL HOMO to lower the hole injection barrier at the HTL/EML interface, effective HTL design must also balance hole mobility and electron blocking in order to maintain charge balance in QD-LEDs.


  • Size-Dependent Formation and Photophysical Properties of Ru(II) Supramolecules with Pyridyl Indolocarbazole

    by Ga Hee Noh, Hagyeong Bae, Neetu Singh, Sain Singh, Ji Yeon Ryu, Yeji Cha, Soumalya Roy, Jaehong Jung, Min Hyung Lee, Junseong Lee

    Extensive efforts in supramolecular chemistry have focused on employing ligands with fluorescence properties. In this study, a new dipyridyl indolocarbazole scaffold (ICzPy) was synthesized and, for the first time, employed in coordination-driven self-assembly with diruthenium (Ru) linkers (Ruox, Rubq, Runq, and Ruaq). Notably, selective formation of [1 + 1] or [2 + 2] assemblies was achieved depending on the type of di-Ru(II) linker: Rubq, Runq, and Ruaq yielded [1 + 1] assemblies, whereas Ruox (oxalate-linked di-Ru(II)) produced a [2 + 2] assembly. The geometric relationship between the dipyridyl indolocarbazole and di-Ru(II) units in the resulting assemblies was further investigated. The solid-state structures of the obtained supramolecules were confirmed using X-ray crystallography, revealing that long Ru linkers formed planar "□"-shape supramolecules, whereas short Ru linkers produced three-dimensional "["-shape supramolecules. The photophysical properties of both ICzPy and the Ru(II) assemblies were also examined. Notably, while ICzPy exhibited a moderately high photoluminescence quantum yield (PLQY), the PLQYs of the arene Ru(II) assemblies decreased sharply to below 2%, likely due to intramolecular photoinduced electron transfer from the ICzPy donor to the Ru acceptor unit.

  • Monomeric Sr Complexes Combined with Tetradentate Enaminolate Ligands for Containing Sr Thin-Film Deposition

    by Yongmin Go, Sangmi Gu, Sunyoung Shin, Seung Uk Son, Taek-Mo Chung, Ji Yeon Ryu, Bo Keun Park

    New strontium complexes, Sr(ONO1)2 (strontium-1-(bis(2-methoxyethyl)amino)-3,3-dimethylbut-1-en-2-olate) (1), Sr(ONO2)2 (strontium-1-(bis(2-ethoxyethyl)amino)-3,3-dimethylbut-1-en-2-olate) (2), and Sr(ONO3)2 (strontium-2-(bis(2-methoxyethyl)amino)-1-(dimethylamino)ethen-1-olate) (3), were successfully synthesized and characterized using tetradentate ligands. The molecular structures of 1-3 were elucidated by nuclear magnetic resonance (NMR) spectroscopy, thermogravimetric analysis (TGA), elemental analysis (EA), and single-crystal X-ray crystallography (XRC). All three complexes exhibited mononuclear structures, featuring nearly identical bicapped trigonal prismatic geometries. TGA revealed that 1, 2, and 3 retained residues of approximately 9.9, 11.9, and 34.5% at 450 °C, respectively. Notably, 1 showed volatility at 70 °C under 0.75 Torr and exhibited a vapor pressure of 0.1 Torr at 150 °C. The enthalpy of evaporation (ΔHvap) for 1 was calculated to be 50.3 kJ/mol. Among the synthesized complexes, 1 demonstrated the highest thermal stability and is considered a promising precursor for atomic layer deposition (ALD) of strontium-containing oxide thin films.

  • Open Access

    Design of Aminophosphine Precursor for Robust Synthesis of InP Quantum Dots with Near‐unity Quantum Yield

    by Doheon Yoo, Euk Hyun Kim, Ji‐Seoung Jeong, Ji Yeon Ryu, Sang Man Koo, Min‐Jae Choi

    Aminophosphines have emerged as promising phosphorus candidates for the synthesis of InP quantum dots (QDs), offering an alternative to traditional tris(trimethylsilyl) phosphine. However, the relatively low reactivity of conventional aminophosphines has led to broader size distribution, resulting in higher full‐width at half‐maximum (FHWM) with lower photoluminescence quantum yield (PLQY). Here, we introduce a new aminosphosphine, bis(bis(trimethylsilyl)amino) phosphine (P[N(SiMe 3 ) 2 ] 2 H), to address this issue. Using nuclear magnetic resonance (NMR) spectroscopy, we demonstrate the direct nucleophilic activation of the P[N(SiMe 3 ) 2 ] 2 H with InCl 3 , leading to the rapid nucleation of InP QDs at a relatively lower synthesis temperature. This enabled to achieve InP/ZnSeS/ZnS QDs with near‐unity PLQY and a FWHM of 48 nm. These findings suggest a new chemistry for the synthesis of InP QDs, and could be extended to other III‐V QDs for advanced optoelectronic applications.


  • Open Access

    Design of Aminophosphine Precursor for Robust Synthesis of InP Quantum Dots with Near‐unity Quantum Yield

    by Doheon Yoo, Euk Hyun Kim, Ji‐Seoung Jeong, Ji Yeon Ryu, Sang Man Koo, Min‐Jae Choi

    Aminophosphines have emerged as promising phosphorus candidates for the synthesis of InP quantum dots (QDs), offering an alternative to traditional tris(trimethylsilyl) phosphine. However, the relatively low reactivity of conventional aminophosphines has led to broader size distribution, resulting in higher full‐width at half‐maximum (FHWM) with lower photoluminescence quantum yield (PLQY). Here, we introduce a new aminosphosphine, bis(bis(trimethylsilyl)amino) phosphine (P[N(SiMe 3 ) 2 ] 2 H), to address this issue. Using nuclear magnetic resonance (NMR) spectroscopy, we demonstrate the direct nucleophilic activation of the P[N(SiMe 3 ) 2 ] 2 H with InCl 3 , leading to the rapid nucleation of InP QDs at a relatively lower synthesis temperature. This enabled to achieve InP/ZnSeS/ZnS QDs with near‐unity PLQY and a FWHM of 48 nm. These findings suggest a new chemistry for the synthesis of InP QDs, and could be extended to other III‐V QDs for advanced optoelectronic applications.


  • Open Access

    The Preparation and Properties of Volatile Tris(N-Alkoxycarboxamidato)chromium(III) Complexes as Potential Single-Source Precursors for the MOCVD of Crystalline Chromium Oxide Thin Films

    by Ji Hun Kim, Da Som Song, Sunyoung Shin, Ji Yeon Ryu, Duk-Young Jung, Jongsun Lim, Chang Gyoun Kim

    The synthesis, characterization, and vapor-phase growth of volatile Cr­(III) complexes as single-source precursors for Cr2O3 thin films are reported. A series of Cr complexesCr­(mdpa)3 (mdpa = N-methoxy-2,2-dimethylpropanamide) (1), Cr­(edpa)3 (edpa = N-ethoxy-2,2-dimethylpropanamide) (2), Cr­(empa)3 (empa = N-ethoxy-2-methylpropanamide) (3), and Cr­(mpa)3 (mpa = N-methoxypropanamide) (4)were synthesized via salt elimination reactions between CrCl3·3THF and N-alkoxy carboxamidate salts. These complexes were characterized by Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis (TGA), single-crystal X-ray diffraction (SC-XRD), Hirshfeld surface analysis, powder X-ray diffraction (PXRD), and vapor pressure measurement. The crystal structure of complex 1 revealed a distorted octahedral geometry with a κ2 (O,O) binding mode. TGA demonstrated that complex 1 underwent weight loss at 132 °C and no residue remained at 500 °C. The enthalpy of vaporization of 1 was estimated to be 25.58 kJ/mol, making it an optimal precursor for Cr2O3 thin films. The XRD patterns of Cr2O3 films deposited on SiO2/Si substrates confirmed their crystalline nature, showing prominent peaks at 2θ = 33.5° and 41.5°. In addition, X-ray photoelectron spectroscopy validated the target Cr/O ratio, supporting the successful formation of Cr2O3 films.


  • Synthesis and characterization of a novel zinc precursor for atomic layer deposition of ZnO thin films

    by Ji Min Seo, Heesun Kim, Yongmin Go, Seung Uk Son, Ji Yeon Ryu, Taek-Mo Chung, Bo Keun Park