Jonas Fredriksson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jonas Fredriksson has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- John Dahl
Electrical Engineering, Chalmers University of Technology, Gothenburg, Sweden
5 shared publications - Maliheh Sadeghi Kati
Vehicle Motion and Thermal Management, Volvo Group Trucks Technology, Gothenburg, Sweden
5 shared publications - Nikolce Murgovski
Chalmers University of Technology
5 shared publications - Gabriel Rodrigues de Campos
Zenseact
4 shared publications - Leo Laine
Department of Mechanics and Maritime Sciences, Chalmers University of Technology, Gothenburg, Sweden
4 shared publications - Stefan Kojchev
Volvo Autonomous Solutions, Gothenburg, Sweden
4 shared publications
Latest Publications
- 18 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 26 (1) , 558-568
A Computation Decomposition Strategy for Optimization-Based Coordination of Automated Vehicles in Confined Sites
Coordinating the motion profiles of fully automated vehicles in confined sites presents a challenge, particularly in avoiding conflicts in MUTually EXclusive (MUTEX) zones like intersections, merge-splits, and narrow roads. Prior methods have utilized optimization-based formulations, where the scheduling (order) of vehicles in MUTEX zones is found using a heuristic, followed by solving a nonlinear program (NLP) to determine the optimal state and control trajectories of each vehicle given the schedule. This paper presents a method that reduces the computational demand in the second step by decomposing the NLP into multiple smaller, parallelly solvable, NLPs. The method uses the confined area’s road network geometry and the vehicle positions to identify non-significant MUTEX relations and leverage results from graph theory to use this information to identify independent subproblems. We demonstrate that the solution obtained using this approach is equivalent to that obtained by solving the original NLP. Furthermore, by utilizing the dual variables connected to the MUTEX enforcing constraints, the method is capable of a further, sub-optimality-inducing, subdivision of the problem, enabling a trade-off between optimality and computation. We show how the method can be utilized, both when the plan needs to be initially computed and when there is a need for updating an existing motion plan. Simulation examples demonstrate the computational improvement with respect to the non-decomposed problem.
- 18 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 26 (1) , 558-568
A Computation Decomposition Strategy for Optimization-Based Coordination of Automated Vehicles in Confined Sites
Coordinating the motion profiles of fully automated vehicles in confined sites presents a challenge, particularly in avoiding conflicts in MUTually EXclusive (MUTEX) zones like intersections, merge-splits, and narrow roads. Prior methods have utilized optimization-based formulations, where the scheduling (order) of vehicles in MUTEX zones is found using a heuristic, followed by solving a nonlinear program (NLP) to determine the optimal state and control trajectories of each vehicle given the schedule. This paper presents a method that reduces the computational demand in the second step by decomposing the NLP into multiple smaller, parallelly solvable, NLPs. The method uses the confined area’s road network geometry and the vehicle positions to identify non-significant MUTEX relations and leverage results from graph theory to use this information to identify independent subproblems. We demonstrate that the solution obtained using this approach is equivalent to that obtained by solving the original NLP. Furthermore, by utilizing the dual variables connected to the MUTEX enforcing constraints, the method is capable of a further, sub-optimality-inducing, subdivision of the problem, enabling a trade-off between optimality and computation. We show how the method can be utilized, both when the plan needs to be initially computed and when there is a need for updating an existing motion plan. Simulation examples demonstrate the computational improvement with respect to the non-decomposed problem.
- Open Access
- 4 October 2024
- Published by Springer Nature
- p. 29-35
Effects of External Tire Heating on Rolling Resistance Energy Consumption
It is known that the rolling resistance decreases with increasing tire temperature. If the tires could be heated to a high temperature, the rolling resistance’s energy loss could be reduced. The question arises whether the reduced rolling resistance energy consumption overcomes the energy required to heat the tire.This paper investigates the effects of external heating and improved tire insulation theoretically. The results indicate that external tire heating can be beneficial only if the heat used is waste heat, generated from a heat pump or similar with a coefficient of performance greater than one or taken from the grid.
- 4 October 2024
- Published by Springer Nature
- p. 29-35
Open AccessEffects of External Tire Heating on Rolling Resistance Energy Consumption
It is known that the rolling resistance decreases with increasing tire temperature. If the tires could be heated to a high temperature, the rolling resistance’s energy loss could be reduced. The question arises whether the reduced rolling resistance energy consumption overcomes the energy required to heat the tire.This paper investigates the effects of external heating and improved tire insulation theoretically. The results indicate that external tire heating can be beneficial only if the heat used is waste heat, generated from a heat pump or similar with a coefficient of performance greater than one or taken from the grid.
- Open Access
- 30 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 10 (3) , 1820-1840
A Stochastic Theory of Longitudinal Dynamics and Energy Consumption of Road Vehicles
Detailed longitudinal dynamics simulations may be used to predict the energy performance of road vehicles. However, including uncertainty in the operating conditions often implies high computational costs. Model-based formulations, in conjunction with statistical methods, may obviate this limitation by directly accounting for stochasticity, thus eliminating the need for simulating large populations of driving and operating cycles. To this end, leveraging directly the methods of stochastic calculus, this work presents a novel theory of longitudinal vehicle dynamics and energy consumption, where the vehicle's speed varies stochastically depending on the characteristics of the operating environment. In particular, the proposed formulation, consisting of stochastic differential equations (SDEs) governing the longitudinal motion of road vehicles, inherently accounts for the statistical variation connected with uncertainties in the driver's behavior and road properties, including, e.g., topography and legal speed. A Fokker-Planck partial differential equation (PDE) that describes the time evolution of the joint probability density function (PDF) of the vehicle's speed, position, and road parameters is also derived from the SDEs established in the paper. The SDE and Fokker-Planck-based approaches enable statistical estimation of important quantities like speed fluctuations, instantaneous power requests, and energy consumption. The developed models may be used to assess the energy performance of road vehicles for different combinations of road transport missions. This is applicable at the early stages of the development, virtual testing, and certification processes, without the need to perform computationally expensive simulations, as corroborated by the virtual experiments conducted in the paper.
- 30 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 10 (3) , 1820-1840
Open AccessA Stochastic Theory of Longitudinal Dynamics and Energy Consumption of Road Vehicles
Detailed longitudinal dynamics simulations may be used to predict the energy performance of road vehicles. However, including uncertainty in the operating conditions often implies high computational costs. Model-based formulations, in conjunction with statistical methods, may obviate this limitation by directly accounting for stochasticity, thus eliminating the need for simulating large populations of driving and operating cycles. To this end, leveraging directly the methods of stochastic calculus, this work presents a novel theory of longitudinal vehicle dynamics and energy consumption, where the vehicle's speed varies stochastically depending on the characteristics of the operating environment. In particular, the proposed formulation, consisting of stochastic differential equations (SDEs) governing the longitudinal motion of road vehicles, inherently accounts for the statistical variation connected with uncertainties in the driver's behavior and road properties, including, e.g., topography and legal speed. A Fokker-Planck partial differential equation (PDE) that describes the time evolution of the joint probability density function (PDF) of the vehicle's speed, position, and road parameters is also derived from the SDEs established in the paper. The SDE and Fokker-Planck-based approaches enable statistical estimation of important quantities like speed fluctuations, instantaneous power requests, and energy consumption. The developed models may be used to assess the energy performance of road vehicles for different combinations of road transport missions. This is applicable at the early stages of the development, virtual testing, and certification processes, without the need to perform computationally expensive simulations, as corroborated by the virtual experiments conducted in the paper.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 33 (4) , 1221-1234
Optimization-Based Coordination of Automated and Human-Driven Vehicles in Confined Sites
This article presents a two-stage optimization-based methodology to control the motion of automated vehicles (AVs) in confined sites where human-driven vehicles (HDVs) are also present. A centralized high-level controller computes the state and input trajectories of the AVs based on the estimated driving behavior of the HDVs such that occupancy conflicts are avoided in cross-intersections, narrow roads, and merge crossings. The high-level controller consists of a component tasked with computing the occupancy order of these zones and a subsequent component that utilizes the calculated order for obtaining the optimal state and input trajectories of the AVs. Through closed-loop simulations, we demonstrate the capability of the proposed approach to consider and partially control the HDVs and the benefit of the method to an alternative approach in terms of energy consumption.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 33 (4) , 1221-1234
Optimization-Based Coordination of Automated and Human-Driven Vehicles in Confined Sites
This article presents a two-stage optimization-based methodology to control the motion of automated vehicles (AVs) in confined sites where human-driven vehicles (HDVs) are also present. A centralized high-level controller computes the state and input trajectories of the AVs based on the estimated driving behavior of the HDVs such that occupancy conflicts are avoided in cross-intersections, narrow roads, and merge crossings. The high-level controller consists of a component tasked with computing the occupancy order of these zones and a subsequent component that utilizes the calculated order for obtaining the optimal state and input trajectories of the AVs. Through closed-loop simulations, we demonstrate the capability of the proposed approach to consider and partially control the HDVs and the benefit of the method to an alternative approach in terms of energy consumption.
- Open Access
- 7 January 2024
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 62 (10) , 2567-2589
Validation of high-fidelity simulation-based safe operating envelopes for articulated heavy vehicles using real test data
- 7 January 2024
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 62 (10) , 2567-2589
Open AccessValidation of high-fidelity simulation-based safe operating envelopes for articulated heavy vehicles using real test data
- Open Access
- 16 November 2023
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 62 (8) , 2138-2161
Safe operating envelope based on a single-track model for yaw instability avoidance of articulated heavy vehicles
- 16 November 2023
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 62 (8) , 2138-2161
Open AccessSafe operating envelope based on a single-track model for yaw instability avoidance of articulated heavy vehicles
- 13 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (2) , 2061-2075
A Two-Stage MIQP-Based Optimization Approach for Coordinating Automated Electric Vehicles in Confined Sites
In this paper, we present a high-level optimization-based control strategy for the coordination of electric automated vehicles (AVs) in confined sites. A centralized controller optimizes the state and input trajectories of all vehicles in the site such that collisions are avoided in cross-intersections, narrow roads, merge crossings, and charging stations, while also considering the charging process. Specifically, the controller consists of two optimization-based components. The first component is tasked with solving the combinatorial part of the problem, which corresponds to the order in which the vehicles pass the crossings, by solving a Mixed Integer Quadratic Problem (MIQP). The found combinatorial solution is then utilized for calculating the optimal state and input trajectories that are obtained by solving a Nonlinear Program (NLP). The control algorithm is compared with respect to alternative optimization-based approaches in simulation scenarios. For the presented scenario, our method achieves improved energy efficiency by up to 7.6% while slightly improving the average mission end time, and furthermore, it is capable of avoiding deadlocks.
- 13 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (2) , 2061-2075
A Two-Stage MIQP-Based Optimization Approach for Coordinating Automated Electric Vehicles in Confined Sites
In this paper, we present a high-level optimization-based control strategy for the coordination of electric automated vehicles (AVs) in confined sites. A centralized controller optimizes the state and input trajectories of all vehicles in the site such that collisions are avoided in cross-intersections, narrow roads, merge crossings, and charging stations, while also considering the charging process. Specifically, the controller consists of two optimization-based components. The first component is tasked with solving the combinatorial part of the problem, which corresponds to the order in which the vehicles pass the crossings, by solving a Mixed Integer Quadratic Problem (MIQP). The found combinatorial solution is then utilized for calculating the optimal state and input trajectories that are obtained by solving a Nonlinear Program (NLP). The control algorithm is compared with respect to alternative optimization-based approaches in simulation scenarios. For the presented scenario, our method achieves improved energy efficiency by up to 7.6% while slightly improving the average mission end time, and furthermore, it is capable of avoiding deadlocks.
- 16 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-14
Charge Planning and Thermal Management of Battery Electric Vehicles
This paper studies optimal thermal management and charging of a battery electric vehicle driving over long-distance trips. The focus is on the potential benefits of including a heat pump in the thermal management system for waste heat recovery, and charging point planning, in a way to achieve optimality in time, energy, or their trade-off. An optimal control problem is formulated, in which the objective function includes the energy delivered by the charger(s), and the total charging time including the actual charging time and the detour time to and from the charging stop. To reduce the computational complexity, the formulated problem is then transformed into a hybrid dynamical system, where charging dynamics are modeled in the domain of normalized charging time. Driving dynamics can be modeled in either trip time or travel distance domains, as the vehicle speed is assumed to be known a priori, and the vehicle is only stopping at charging locations. Within the hybrid dynamical system, a binary variable is introduced for each charging location, in order to decide whether to use or skip a charger. This problem is solved numerically, and simulations are performed to evaluate the performance in terms of energy efficiency and time. The simulation results indicate that the time required for charging and total energy consumption are reduced up to $30.6\%$ and $19.4\%$ , respectively, by applying the proposed algorithm.
- 16 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-14
Charge Planning and Thermal Management of Battery Electric Vehicles
This paper studies optimal thermal management and charging of a battery electric vehicle driving over long-distance trips. The focus is on the potential benefits of including a heat pump in the thermal management system for waste heat recovery, and charging point planning, in a way to achieve optimality in time, energy, or their trade-off. An optimal control problem is formulated, in which the objective function includes the energy delivered by the charger(s), and the total charging time including the actual charging time and the detour time to and from the charging stop. To reduce the computational complexity, the formulated problem is then transformed into a hybrid dynamical system, where charging dynamics are modeled in the domain of normalized charging time. Driving dynamics can be modeled in either trip time or travel distance domains, as the vehicle speed is assumed to be known a priori, and the vehicle is only stopping at charging locations. Within the hybrid dynamical system, a binary variable is introduced for each charging location, in order to decide whether to use or skip a charger. This problem is solved numerically, and simulations are performed to evaluate the performance in terms of energy efficiency and time. The simulation results indicate that the time required for charging and total energy consumption are reduced up to $30.6\%$ and $19.4\%$ , respectively, by applying the proposed algorithm.
- 7 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 8 (4) , 2914-2925
Prediction-Uncertainty-Aware Threat Detection for ADAS: A Case Study on Lane-Keeping Assistance
Advanced driver assistance systems typically support the driver in cases where the driver is likely to fail the driving task. The challenge, from a system perspective, is to accurately detect those cases. Recently, machine learning-based prediction models that are able to estimate the prediction uncertainty in real-time have successfully been introduced for this purpose. However, very little effort has been made on using the prediction uncertainty in the decision-making logic to improve the system's robustness, especially in cases where the input data is affected by noise or anomalies that are not presented in the training data. In this work, four threat-detection methods using uncertainty estimates are proposed and evaluated using a real-world data set. The methods use different strategies for leveraging uncertainty information, where the goal is to ensure that the intervention decision is based on trustworthy predictions. The threat-detection methods' performances are evaluated, using five different learning-based prediction models, in the context of a lane-keeping assistance application.
- 7 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 8 (4) , 2914-2925
Prediction-Uncertainty-Aware Threat Detection for ADAS: A Case Study on Lane-Keeping Assistance
Advanced driver assistance systems typically support the driver in cases where the driver is likely to fail the driving task. The challenge, from a system perspective, is to accurately detect those cases. Recently, machine learning-based prediction models that are able to estimate the prediction uncertainty in real-time have successfully been introduced for this purpose. However, very little effort has been made on using the prediction uncertainty in the decision-making logic to improve the system's robustness, especially in cases where the input data is affected by noise or anomalies that are not presented in the training data. In this work, four threat-detection methods using uncertainty estimates are proposed and evaluated using a real-world data set. The methods use different strategies for leveraging uncertainty information, where the goal is to ensure that the intervention decision is based on trustworthy predictions. The threat-detection methods' performances are evaluated, using five different learning-based prediction models, in the context of a lane-keeping assistance application.
- 27 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (6) , 7265-7278
Optimal Thermal Management, Charging, and Eco-Driving of Battery Electric Vehicles
This paper addresses optimal battery thermal management, charging, and eco-driving of a battery electric vehicle (BEV) with the goal of improving its grid-to-meter energy efficiency. Thus, an optimization problem is formulated, aiming at finding the optimal trade-off between trip time and charging cost. The formulated problem is then transformed into a hybrid dynamical system, where the dynamics in driving and charging modes are modeled with different functions and with different state and control vectors. Moreover, to improve computational efficiency, we propose modeling the driving dynamics in a spatial domain, where decisions are made along the traveled distance. Charging dynamics are modeled in a temporal domain, where decisions are made along a normalized charging time. The actual charging time is modeled as a scalar variable that is optimized simultaneously with the optimal state and control trajectories, for both charging and driving modes. The performance of the proposed algorithm is assessed over a road with a hilly terrain, where two charging possibilities are considered along the driving route and the battery is soaked to the ambient before departure. According to the results, trip time including driving and charging times, is reduced by 44%, compared to a case without active heating/cooling of the battery.
- 27 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (6) , 7265-7278
Optimal Thermal Management, Charging, and Eco-Driving of Battery Electric Vehicles
This paper addresses optimal battery thermal management, charging, and eco-driving of a battery electric vehicle (BEV) with the goal of improving its grid-to-meter energy efficiency. Thus, an optimization problem is formulated, aiming at finding the optimal trade-off between trip time and charging cost. The formulated problem is then transformed into a hybrid dynamical system, where the dynamics in driving and charging modes are modeled with different functions and with different state and control vectors. Moreover, to improve computational efficiency, we propose modeling the driving dynamics in a spatial domain, where decisions are made along the traveled distance. Charging dynamics are modeled in a temporal domain, where decisions are made along a normalized charging time. The actual charging time is modeled as a scalar variable that is optimized simultaneously with the optimal state and control trajectories, for both charging and driving modes. The performance of the proposed algorithm is assessed over a road with a hilly terrain, where two charging possibilities are considered along the driving route and the battery is soaked to the ambient before departure. According to the results, trip time including driving and charging times, is reduced by 44%, compared to a case without active heating/cooling of the battery.