Doris Brockmann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Doris Brockmann has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Eberhard Morgenroth
Eawag: Swiss Federal Institute of Aquatic Science and Technology, 8600 Dübendorf, Switzerland
7 shared publications - Jean-Philippe Steyer
INRAE, Univ Montpellier, LBE, Narbonne, France
5 shared publications Arnaud Hélias
INRA, Laboratoire de Biotechnologie de l'Environnement Narbonne France
2 shared publicationsEberhard Morgenroth
ETH Zürich, Institute of Environmental Engineering, Zürich 8093, Switzerland and EAWAG, Swiss Federal Institute of Aquatic Science and Technology, Dübendorf 8600, Switzerland
2 shared publications- Eduardo Ayesa
CEIT and Tecnun (University of Navarra), Manuel de Lardizábal 15, 20018 San Sebastián, Spain
2 shared publications Glen T. Daigger
Dept. of Civil and Environmental Engineering, University of Michigan, 1351 Beal Ave., Ann Arbor, MI 48109, USA
2 shared publications
Latest Publications
- 16 January 2018
- Published by IWA Publishing in Water Science & Technology
- Vol. 77 (5) , 1149-1164
A framework for good biofilm reactor modeling practice (GBRMP)
A researcher or practitioner can employ a biofilm model to gain insight into what controls the performance of a biofilm process and for optimizing its performance. While a wide range of biofilm-modeling platforms is available, a good strategy is to choose the simplest model that includes sufficient components and processes to address the modeling goal. In most cases, a one-dimensional biofilm model provides the best balance, and good choices can range from hand-calculation analytical solutions, simple spreadsheets, and numerical-method platforms. What is missing today is clear guidance on how to apply a biofilm model to obtain accurate and meaningful results. Here, we present a five-step framework for good biofilm reactor modeling practice (GBRMP). The first four steps are (1) obtain information on the biofilm reactor system, (2) characterize the influent, (3) choose the plant and biofilm model, and (4) define the conversion processes. Each step demands that the model user understands the important components and processes in the system, one of the main benefits of doing biofilm modeling. The fifth step is to calibrate and validate the model: System-specific model parameters are adjusted within reasonable ranges so that model outputs match actual system performance. Calibration is not a simple ‘by the numbers’ process, and it requires that the modeler follows a logical hierarchy of steps. Calibration requires that the adjusted parameters remain within realistic ranges and that the calibration process be carried out in an iterative manner. Once each of steps 1 through 5 is completed satisfactorily, the calibrated model can be used for its intended purpose, such as optimizing performance, trouble-shooting poor performance, or gaining deeper understanding of what controls process performance.
- 16 January 2018
- Published by IWA Publishing in Water Science & Technology
- Vol. 77 (5) , 1149-1164
A framework for good biofilm reactor modeling practice (GBRMP)
A researcher or practitioner can employ a biofilm model to gain insight into what controls the performance of a biofilm process and for optimizing its performance. While a wide range of biofilm-modeling platforms is available, a good strategy is to choose the simplest model that includes sufficient components and processes to address the modeling goal. In most cases, a one-dimensional biofilm model provides the best balance, and good choices can range from hand-calculation analytical solutions, simple spreadsheets, and numerical-method platforms. What is missing today is clear guidance on how to apply a biofilm model to obtain accurate and meaningful results. Here, we present a five-step framework for good biofilm reactor modeling practice (GBRMP). The first four steps are (1) obtain information on the biofilm reactor system, (2) characterize the influent, (3) choose the plant and biofilm model, and (4) define the conversion processes. Each step demands that the model user understands the important components and processes in the system, one of the main benefits of doing biofilm modeling. The fifth step is to calibrate and validate the model: System-specific model parameters are adjusted within reasonable ranges so that model outputs match actual system performance. Calibration is not a simple ‘by the numbers’ process, and it requires that the modeler follows a logical hierarchy of steps. Calibration requires that the adjusted parameters remain within realistic ranges and that the calibration process be carried out in an iterative manner. Once each of steps 1 through 5 is completed satisfactorily, the calibrated model can be used for its intended purpose, such as optimizing performance, trouble-shooting poor performance, or gaining deeper understanding of what controls process performance.
- 17 March 2017
- Published by IWA Publishing in Water Science & Technology
- Vol. 75 (12) , 2818-2828
Biofilm carrier migration model describes reactor performance
The accuracy of a biofilm reactor model depends on the extent to which physical system conditions (particularly bulk-liquid hydrodynamics and their influence on biofilm dynamics) deviate from the ideal conditions upon which the model is based. It follows that an improved capacity to model a biofilm reactor does not necessarily rely on an improved biofilm model, but does rely on an improved mathematical description of the biofilm reactor and its components. Existing biofilm reactor models typically include a one-dimensional biofilm model, a process (biokinetic and stoichiometric) model, and a continuous flow stirred tank reactor (CFSTR) mass balance that [when organizing CFSTRs in series] creates a pseudo two-dimensional (2-D) model of bulk-liquid hydrodynamics approaching plug flow. In such a biofilm reactor model, the user-defined biofilm area is specified for each CFSTR; thereby, Xcarrier does not exit the boundaries of the CFSTR to which they are assigned or exchange boundaries with other CFSTRs in the series. The error introduced by this pseudo 2-D biofilm reactor modeling approach may adversely affect model results and limit model-user capacity to accurately calibrate a model. This paper presents a new sub-model that describes the migration of Xcarrier and associated biofilms, and evaluates the impact that Xcarrier migration and axial dispersion has on simulated system performance. Relevance of the new biofilm reactor model to engineering situations is discussed by applying it to known biofilm reactor types and operational conditions.
- 17 March 2017
- Published by IWA Publishing in Water Science & Technology
- Vol. 75 (12) , 2818-2828
Biofilm carrier migration model describes reactor performance
The accuracy of a biofilm reactor model depends on the extent to which physical system conditions (particularly bulk-liquid hydrodynamics and their influence on biofilm dynamics) deviate from the ideal conditions upon which the model is based. It follows that an improved capacity to model a biofilm reactor does not necessarily rely on an improved biofilm model, but does rely on an improved mathematical description of the biofilm reactor and its components. Existing biofilm reactor models typically include a one-dimensional biofilm model, a process (biokinetic and stoichiometric) model, and a continuous flow stirred tank reactor (CFSTR) mass balance that [when organizing CFSTRs in series] creates a pseudo two-dimensional (2-D) model of bulk-liquid hydrodynamics approaching plug flow. In such a biofilm reactor model, the user-defined biofilm area is specified for each CFSTR; thereby, Xcarrier does not exit the boundaries of the CFSTR to which they are assigned or exchange boundaries with other CFSTRs in the series. The error introduced by this pseudo 2-D biofilm reactor modeling approach may adversely affect model results and limit model-user capacity to accurately calibrate a model. This paper presents a new sub-model that describes the migration of Xcarrier and associated biofilms, and evaluates the impact that Xcarrier migration and axial dispersion has on simulated system performance. Relevance of the new biofilm reactor model to engineering situations is discussed by applying it to known biofilm reactor types and operational conditions.
- 1 September 2015
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 9 (6) , 696-708
Environmental assessment of bioethanol from onshore grown green seaweed
Algae are an attractive, alternative renewable source for biofuel production compared to biomass from food crops or cellulosic materials. Marine algae do not need fresh water or arable land and, thus, production of marine algae does not compete with food production. In contrast to biofuel production from microalgae, the use of macroalgal biomass as feedstock for biofuel production is still in its infancy. This study presents an environmental assessment of bioethanol from onshore grown green seaweed using the life cycle assessment (LCA) methodology. The environmental assessment is based on data from literature and initial laboratory scale experiments, as industrial scale facilities for bioethanol production from macroalgae do not exist. Alternative systems are compared to the reference system and the limits of the LCA are discussed with respect to the co‐product management (allocation vs. substitution) in the LCA model. Impact assessment results showed that nutrients for seaweed growth and electricity consumption by the culture system were the main contributors to the environmental burdens of the reference system. Bioethanol from onshore cultivated green seaweed turned out to be an environmentally efficient biofuel compared to fossil fuel and bioethanol from sugarcane. The type of co‐product management selected in LCA largely affected the impact assessment results. © 2015 Society of Chemical Industry and John Wiley & Sons, Ltd
- 1 September 2015
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 9 (6) , 696-708
Environmental assessment of bioethanol from onshore grown green seaweed
Algae are an attractive, alternative renewable source for biofuel production compared to biomass from food crops or cellulosic materials. Marine algae do not need fresh water or arable land and, thus, production of marine algae does not compete with food production. In contrast to biofuel production from microalgae, the use of macroalgal biomass as feedstock for biofuel production is still in its infancy. This study presents an environmental assessment of bioethanol from onshore grown green seaweed using the life cycle assessment (LCA) methodology. The environmental assessment is based on data from literature and initial laboratory scale experiments, as industrial scale facilities for bioethanol production from macroalgae do not exist. Alternative systems are compared to the reference system and the limits of the LCA are discussed with respect to the co‐product management (allocation vs. substitution) in the LCA model. Impact assessment results showed that nutrients for seaweed growth and electricity consumption by the culture system were the main contributors to the environmental burdens of the reference system. Bioethanol from onshore cultivated green seaweed turned out to be an environmentally efficient biofuel compared to fossil fuel and bioethanol from sugarcane. The type of co‐product management selected in LCA largely affected the impact assessment results. © 2015 Society of Chemical Industry and John Wiley & Sons, Ltd
- Open Access
- 1 July 2015
- Published by Elsevier in Algal Research
- Vol. 10, 55-63
Microalgae production in wastewater treatment systems, anaerobic digestion and modelling using ADM1
- 1 July 2015
- Published by Elsevier in Algal Research
- Vol. 10, 55-63
Open AccessMicroalgae production in wastewater treatment systems, anaerobic digestion and modelling using ADM1
- 1 July 2014
- Published by Elsevier in Bioresource Technology
- Vol. 163, 270-279
Environmental assessment of nutrient recycling from biological pig slurry treatment – Impact of fertilizer substitution and field emissions
- 1 July 2014
- Published by Elsevier in Bioresource Technology
- Vol. 163, 270-279
Environmental assessment of nutrient recycling from biological pig slurry treatment – Impact of fertilizer substitution and field emissions
- 1 July 2013
- Published by IWA Publishing in Water Science & Technology
- Vol. 68 (2) , 296-302
Add Control: plant virtualization for control solutions in WWTP
This paper summarizes part of the research work carried out in the Add Control project, which proposes an extension of the wastewater treatment plant (WWTP) models and modelling architectures used in traditional WWTP simulation tools, addressing, in addition to the classical mass transformations (transport, physico-chemical phenomena, biological reactions), all the instrumentation, actuation and automation & control components (sensors, actuators, controllers), considering their real behaviour (signal delays, noise, failures and power consumption of actuators). Its ultimate objective is to allow a rapid transition from the simulation of the control strategy to its implementation at full-scale plants. Thus, this paper presents the application of the Add Control simulation platform for the design and implementation of new control strategies at the WWTP of Mekolalde.
- 1 July 2013
- Published by IWA Publishing in Water Science & Technology
- Vol. 68 (2) , 296-302
Add Control: plant virtualization for control solutions in WWTP
This paper summarizes part of the research work carried out in the Add Control project, which proposes an extension of the wastewater treatment plant (WWTP) models and modelling architectures used in traditional WWTP simulation tools, addressing, in addition to the classical mass transformations (transport, physico-chemical phenomena, biological reactions), all the instrumentation, actuation and automation & control components (sensors, actuators, controllers), considering their real behaviour (signal delays, noise, failures and power consumption of actuators). Its ultimate objective is to allow a rapid transition from the simulation of the control strategy to its implementation at full-scale plants. Thus, this paper presents the application of the Add Control simulation platform for the design and implementation of new control strategies at the WWTP of Mekolalde.
- 27 December 2012
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 110 (5) , 1323-1332
Biofilm model calibration and microbial diversity study using Monte Carlo simulations
Mathematical models are useful tools for studying and exploring biological conversion processes as well as microbial competition in biological treatment processes. A single‐species biofilm model was used to describe biofilm reactor operation at three different hydraulic retention times (HRT). The single‐species biofilm model was calibrated with sparse experimental data using the Monte Carlo filtering method. This calibrated single‐species biofilm model was then extended to a multi‐species model considering 10 different heterotrophic bacteria. The aim was to study microbial diversity in bulk phase biomass and biofilm, as well as the competition between suspended and attached biomass. At steady state and independently of the HRT, Monte Carlo simulations resulted only in one unique dominating bacterial species for suspended and attached biomass. The dominating bacterial species was determined by the highest specific substrate affinity (ratio of µ/KS). At a short HRT of 20 min, the structure of the microbial community in the bulk liquid was determined by biomass detached from the biofilm. At a long HRT of 8 h, both biofilm detachment and microbial growth in the bulk liquid influenced the microbial community distribution. Biotechnol. Bioeng. 2013; 110: 1323–1332.
- 27 December 2012
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 110 (5) , 1323-1332
Biofilm model calibration and microbial diversity study using Monte Carlo simulations
Mathematical models are useful tools for studying and exploring biological conversion processes as well as microbial competition in biological treatment processes. A single‐species biofilm model was used to describe biofilm reactor operation at three different hydraulic retention times (HRT). The single‐species biofilm model was calibrated with sparse experimental data using the Monte Carlo filtering method. This calibrated single‐species biofilm model was then extended to a multi‐species model considering 10 different heterotrophic bacteria. The aim was to study microbial diversity in bulk phase biomass and biofilm, as well as the competition between suspended and attached biomass. At steady state and independently of the HRT, Monte Carlo simulations resulted only in one unique dominating bacterial species for suspended and attached biomass. The dominating bacterial species was determined by the highest specific substrate affinity (ratio of µ/KS). At a short HRT of 20 min, the structure of the microbial community in the bulk liquid was determined by biomass detached from the biofilm. At a long HRT of 8 h, both biofilm detachment and microbial growth in the bulk liquid influenced the microbial community distribution. Biotechnol. Bioeng. 2013; 110: 1323–1332.
- Top Cited Papers
- 1 May 2012
- Published by Elsevier in Bioresource Technology
- Vol. 111, 55-61
Total solids content drives high solid anaerobic digestion via mass transfer limitation
- 1 May 2012
- Published by Elsevier in Bioresource Technology
- Vol. 111, 55-61
Top Cited PapersTotal solids content drives high solid anaerobic digestion via mass transfer limitation
- 1 August 2011
- Published by IWA Publishing in Water Science & Technology
- Vol. 64 (4) , 930-944
Systematic evaluation of biofilm models for engineering practice: components and critical assumptions
Biofilm models are valuable tools for the design and evaluation of biofilm-based processes despite several uncertainties including the dynamics and rate of biofilm detachment, concentration gradients external to the biofilm surface, and undefined biofilm reactor model calibration protocol. The present investigation serves to (1) systematically evaluate critical biofilm model assumptions and components and (2) conduct a sensitivity analysis with the aim of identifying parameter subsets for biofilm reactor model calibration. AQUASIM was used to describe submerged-completely mixed combined carbon oxidation and nitrification IFAS and MBBR systems, and tertiary nitrification and denitrification MBBRs. The influence of uncertainties in model parameters on relevant model outputs was determined for simulated scenarios by means of a local sensitivity analysis. To obtain reasonable simulation results for partially penetrated biofilms that accumulated a substantial thickness in the modelled biofilm reactor (e.g. 1,000 μm), an appropriate biofilm discretization was applied to properly model soluble substrate concentration gradients and, consistent with the assumed mechanism for describing biofilm biomass distribution, biofilm biomass spatial variability. The MTBL thickness had a significant impact on model results for each of the modelled reactor configurations. Further research is needed to develop a mathematical description (empirical or otherwise) of the MTBL thickness that is relevant to modern biofilm reactors. No simple recommendations for a generally applicable calibration protocol are provided, but sensitivity analysis has been proven to be a powerful tool for the identification of highly sensitive parameter subsets for biofilm (reactor) model calibration.
- 1 August 2011
- Published by IWA Publishing in Water Science & Technology
- Vol. 64 (4) , 930-944
Systematic evaluation of biofilm models for engineering practice: components and critical assumptions
Biofilm models are valuable tools for the design and evaluation of biofilm-based processes despite several uncertainties including the dynamics and rate of biofilm detachment, concentration gradients external to the biofilm surface, and undefined biofilm reactor model calibration protocol. The present investigation serves to (1) systematically evaluate critical biofilm model assumptions and components and (2) conduct a sensitivity analysis with the aim of identifying parameter subsets for biofilm reactor model calibration. AQUASIM was used to describe submerged-completely mixed combined carbon oxidation and nitrification IFAS and MBBR systems, and tertiary nitrification and denitrification MBBRs. The influence of uncertainties in model parameters on relevant model outputs was determined for simulated scenarios by means of a local sensitivity analysis. To obtain reasonable simulation results for partially penetrated biofilms that accumulated a substantial thickness in the modelled biofilm reactor (e.g. 1,000 μm), an appropriate biofilm discretization was applied to properly model soluble substrate concentration gradients and, consistent with the assumed mechanism for describing biofilm biomass distribution, biofilm biomass spatial variability. The MTBL thickness had a significant impact on model results for each of the modelled reactor configurations. Further research is needed to develop a mathematical description (empirical or otherwise) of the MTBL thickness that is relevant to modern biofilm reactors. No simple recommendations for a generally applicable calibration protocol are provided, but sensitivity analysis has been proven to be a powerful tool for the identification of highly sensitive parameter subsets for biofilm (reactor) model calibration.