Keiichi Fujimori
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Keiichi Fujimori has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Takayo Moriuchi-Kawakami
Department of Applied Chemistry, Faculty of Engineering, Osaka Institute of Technology, 5-16-1 Omiya, Asahi, Osaka 535-8585, Japan
4 shared publications - Masanari Hirahara
Department of Applied Chemistry, Faculty of Engineering Osaka Institute of Technology 5‐16‐1 Omiya, Asahi Ward Osaka 535‐8585 Japan
3 shared publications - Toshiyuki Moriuchi
Department of Chemistry, Graduate School of Science, Osaka Metropolitan University, Osaka, Japan
2 shared publications - Akihisa Higashikado
Department of Applied Chemistry, Faculty of Engineering, Osaka Institute of Technology, 5-16-1 Omiya, Asahi, Osaka 535-8585, Japan
1 shared publication Akira Hasegawa
Division of Applied Chemistry Graduate School of Engineering The University of Osaka Osaka Japan
1 shared publicationAkira Izutani
Department of Applied Chemistry, Faculty of Engineering, Osaka Institute of Technology, Asahi, Japan
1 shared publication
Latest Publications
- 1 June 2026
- Published by Bentham Science Publishers Ltd. in Current Analytical Chemistry
- Vol. 22 (5) , 882-890
Development of an Adhesive Solution for a Modified ISFET with a Traditional Ion-selective PVC Membrane
Background: Ion-sensitive field-effect transistors (ISFETs) can measure the concentration of specific ions in solutions, by attaching ion-sensing membranes proposed for ion-selective electrodes (ISEs) to their gate surfaces. Numerous organic ion-sensing membranes for ISEs have been developed. However, the adhesion between the ion-sensing membranes and the gate surfaces is poor, therefore, adversely affecting the potential responses of ISFETs. Methods: New adhesive solutions to attach the ion-sensing polyvinyl chloride (PVC) membranes to the gate surfaces of ISFETs have been developed. The proposed adhesive solutions were made in tetrahydrofuran (THF) from polymer blends containing PVC and paraloid B-72 in different ratios. Results: It was found that the adhesive solution with a composition ratio of PVC: Paraloid B-72 = 10:90 provided particularly good adhesion and the best slope of the potential response to Na+-activity change. The best ion selectivity for the Na+ ion was exhibited by ISFET with the adhesive solution having a composition ratio of PVC: Paraloid B-72 = 20:80. Discussion:: The results of the tensile test indicated that the PVC components in the adhesive solutions may not be directly involved in adhesion to the gate surface of the ISEFTs. The adhesive solution consisting of only PVC content provided the worst slope of the potential response to Na+-activity change. Conclusion: The ion-sensing PVC membranes were stably attached using the proposed adhesive solutions on the gate surfaces of the ISFETs. By using the proposed adhesive solution, the ISFETs with the ion-sensing PVC membranes showed good potential responses.
- 1 June 2026
- Published by Bentham Science Publishers Ltd. in Current Analytical Chemistry
- Vol. 22 (5) , 882-890
Development of an Adhesive Solution for a Modified ISFET with a Traditional Ion-selective PVC Membrane
Background: Ion-sensitive field-effect transistors (ISFETs) can measure the concentration of specific ions in solutions, by attaching ion-sensing membranes proposed for ion-selective electrodes (ISEs) to their gate surfaces. Numerous organic ion-sensing membranes for ISEs have been developed. However, the adhesion between the ion-sensing membranes and the gate surfaces is poor, therefore, adversely affecting the potential responses of ISFETs. Methods: New adhesive solutions to attach the ion-sensing polyvinyl chloride (PVC) membranes to the gate surfaces of ISFETs have been developed. The proposed adhesive solutions were made in tetrahydrofuran (THF) from polymer blends containing PVC and paraloid B-72 in different ratios. Results: It was found that the adhesive solution with a composition ratio of PVC: Paraloid B-72 = 10:90 provided particularly good adhesion and the best slope of the potential response to Na+-activity change. The best ion selectivity for the Na+ ion was exhibited by ISFET with the adhesive solution having a composition ratio of PVC: Paraloid B-72 = 20:80. Discussion:: The results of the tensile test indicated that the PVC components in the adhesive solutions may not be directly involved in adhesion to the gate surface of the ISEFTs. The adhesive solution consisting of only PVC content provided the worst slope of the potential response to Na+-activity change. Conclusion: The ion-sensing PVC membranes were stably attached using the proposed adhesive solutions on the gate surfaces of the ISFETs. By using the proposed adhesive solution, the ISFETs with the ion-sensing PVC membranes showed good potential responses.
- 5 March 2026
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 29 (11)
A Ruthenium Complex With an Asymmetric Bidentate Proton‐Acceptor Ligand: Chlorido vs Aqua Ligands Influence Solvatochromism and Reversible Photoisomerization
A series of ruthenium complexes showing unique solvatochromism in the chlorido‐ligated form and reversible photoisomerization in the aqua‐ligated form has been developed. The complexes bear a tridentate ligand and a bidentate ligand containing naphthyridine and diethylamino moieties. In the chlorido complex, steric repulsion between the chlorido ligand and the diethylamino group promotes ligand‐substitution with solvent molecules in coordinating and protic solvents. The absorption maxima in the visible region shifted by approximately 120 nm depending on the solvent. The aqua complex exhibited intramolecular hydrogen bonding between the aqua and diethylamino moieties according to X‐ray crystallography. The photoisomerization behavior of the aqua complex was evaluated by 1 H nuclear magnetic resonance measurements. The quantum yield of photoisomerization was 2 × 10 −4 , which is much smaller than that of the complex without the diethylamino moiety, indicating that the hydrogen bonding hinders the photodissociation of the aqua ligand.
- 5 March 2026
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 29 (11)
A Ruthenium Complex With an Asymmetric Bidentate Proton‐Acceptor Ligand: Chlorido vs Aqua Ligands Influence Solvatochromism and Reversible Photoisomerization
A series of ruthenium complexes showing unique solvatochromism in the chlorido‐ligated form and reversible photoisomerization in the aqua‐ligated form has been developed. The complexes bear a tridentate ligand and a bidentate ligand containing naphthyridine and diethylamino moieties. In the chlorido complex, steric repulsion between the chlorido ligand and the diethylamino group promotes ligand‐substitution with solvent molecules in coordinating and protic solvents. The absorption maxima in the visible region shifted by approximately 120 nm depending on the solvent. The aqua complex exhibited intramolecular hydrogen bonding between the aqua and diethylamino moieties according to X‐ray crystallography. The photoisomerization behavior of the aqua complex was evaluated by 1 H nuclear magnetic resonance measurements. The quantum yield of photoisomerization was 2 × 10 −4 , which is much smaller than that of the complex without the diethylamino moiety, indicating that the hydrogen bonding hinders the photodissociation of the aqua ligand.
- 23 March 2023
- Published by Springer Nature in Analytical Sciences
- Vol. 39 (7) , 1143-1149
Deep-sea in situ determination of sulfide using a sensitized chemiluminescent terbium complex
A new chemiluminescence (CL) method based on the chemiluminescent reaction between sulfide and an acidic permanganate solution was used to quantify sulfide in seawater. A terbium–pipemidic acid complex was used as CL enhancer. The method was used to determine sulfide in the concentration range of 1–30 μmol/L in artificial seawater samples. The limit of detection of the method was 21 nmol/L sulfide. The sensitivity of the CL method was eight times higher than that of the CL method reported previously. Br− ions, which are conservative ions, interfered with sulfide. We investigated the effects of salinity, water temperature, and interfering chemicals,such asheavy-metal ions and organic matter, on the performance of the CL method. In addition, sulfite-spiked natural seawater samples were analyzed. The results demonstrate that the CL method can be used to develop a deep-sea sulfide analyzer. Graphical abstract
- 23 March 2023
- Published by Springer Nature in Analytical Sciences
- Vol. 39 (7) , 1143-1149
Deep-sea in situ determination of sulfide using a sensitized chemiluminescent terbium complex
A new chemiluminescence (CL) method based on the chemiluminescent reaction between sulfide and an acidic permanganate solution was used to quantify sulfide in seawater. A terbium–pipemidic acid complex was used as CL enhancer. The method was used to determine sulfide in the concentration range of 1–30 μmol/L in artificial seawater samples. The limit of detection of the method was 21 nmol/L sulfide. The sensitivity of the CL method was eight times higher than that of the CL method reported previously. Br− ions, which are conservative ions, interfered with sulfide. We investigated the effects of salinity, water temperature, and interfering chemicals,such asheavy-metal ions and organic matter, on the performance of the CL method. In addition, sulfite-spiked natural seawater samples were analyzed. The results demonstrate that the CL method can be used to develop a deep-sea sulfide analyzer. Graphical abstract
- Open Access
Bis(1-pyrenylmethyl)-2-benzyl-2-methyl-malonate as a Cu2+ Ion-Selective Fluoroionophore
A new malonate possessing two pyrene moieties was synthesized as a fluoroionophore, and its structure and fluorescence spectroscopic properties were investigated. When excited at 344 nm in acetonitrile/chloroform (9:1, v/v), the synthesized bispyrenyl malonate has the fluorescence of intramolecular excimer (λem = 467 nm) emissions and not a pyrene monomer emission (λem = 394 nm). A large absolute fluorescence quantum yield was obtained in the solid state (ΦPL = 0.65) rather than in solution (ΦPL = 0.13). X-ray crystallography analysis clarified the molecular structure and alignment of the bispyrenyl malonate in the crystal phase, elucidating its fluorescence spectroscopic properties. Such analysis also suggests there are intramolecular C–H···π interactions and intermolecular π···π interactions between the pyrenyl rings. Interestingly, the synthesized bispyrenyl malonate exhibits excellent fluorescence sensing for the Cu2+ ion. Remarkable fluorescence intensity enhancement was only observed with the addition of the Cu2+ ion.
Open AccessBis(1-pyrenylmethyl)-2-benzyl-2-methyl-malonate as a Cu2+ Ion-Selective Fluoroionophore
A new malonate possessing two pyrene moieties was synthesized as a fluoroionophore, and its structure and fluorescence spectroscopic properties were investigated. When excited at 344 nm in acetonitrile/chloroform (9:1, v/v), the synthesized bispyrenyl malonate has the fluorescence of intramolecular excimer (λem = 467 nm) emissions and not a pyrene monomer emission (λem = 394 nm). A large absolute fluorescence quantum yield was obtained in the solid state (ΦPL = 0.65) rather than in solution (ΦPL = 0.13). X-ray crystallography analysis clarified the molecular structure and alignment of the bispyrenyl malonate in the crystal phase, elucidating its fluorescence spectroscopic properties. Such analysis also suggests there are intramolecular C–H···π interactions and intermolecular π···π interactions between the pyrenyl rings. Interestingly, the synthesized bispyrenyl malonate exhibits excellent fluorescence sensing for the Cu2+ ion. Remarkable fluorescence intensity enhancement was only observed with the addition of the Cu2+ ion.
- 19 April 2017
- Published by Wiley in Luminescence
- Vol. 32 (7) , 1240-1245
Enhanced chemiluminescence for trazodone trace analysis based on acidic permanganate oxidation in concurrent presence of rhodamine 6G
A new sensitized chemiluminescence method by acidic permanganate oxidation was developed for the sensitive determination of trazodone. A fluorescent dye as used rhodamine 6G to increase a chemiluminescence intensity. Under optimum conditions, the liner range of the calibration curve was obtained for 1–5000 nmol/L. The limit of detection was calculated from 3σ of a blank was 0.23 nmol/L. The coexistent ions and substances had no interference with the chemiluminescence measurement. The chemiluminescence spectra were measured to elucidate a possible mechanism for the system. The present method was satisfactorily used in the determination of the drugs in pharmaceutical samples and animal serums.
- 19 April 2017
- Published by Wiley in Luminescence
- Vol. 32 (7) , 1240-1245
Enhanced chemiluminescence for trazodone trace analysis based on acidic permanganate oxidation in concurrent presence of rhodamine 6G
A new sensitized chemiluminescence method by acidic permanganate oxidation was developed for the sensitive determination of trazodone. A fluorescent dye as used rhodamine 6G to increase a chemiluminescence intensity. Under optimum conditions, the liner range of the calibration curve was obtained for 1–5000 nmol/L. The limit of detection was calculated from 3σ of a blank was 0.23 nmol/L. The coexistent ions and substances had no interference with the chemiluminescence measurement. The chemiluminescence spectra were measured to elucidate a possible mechanism for the system. The present method was satisfactorily used in the determination of the drugs in pharmaceutical samples and animal serums.