XHXin-Ming Hu

Xin-Ming Hu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xin-Ming Hu has a total of 178 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Direct electrochemical conversion of bicarbonate solution to formate over a Bi 2 O 3 -derived catalyst under flue gas conditions

    by Lan-Hui Feng, Chun-Qing Yin, Hongzhi Wang, Licheng Liu, Yan Li, Xin-Ming Hu

    We report an efficient system that converts aqueous bicarbonate solution into formate using a Bi 2 O 3 -derived catalyst under flue gas conditions, laying the foundation for integrating CO 2 capture with electrochemical conversion to produce formate.

  • Open Access

    Amine-mediated, oxygen-tolerant concerted capture and electrochemical conversion of CO2 from flue gas

    by Chun-Qing Yin, Ye-Bin Zou, Zhi-Hui Lv, Lin Du, Yan Li, Xin-Ming Hu

    Integrated capture and electrochemical conversion of CO2 from flue gas can mitigate the energy penalties of conventional decoupled processes, offering a promising pathway to reduce CO2 emissions and valorize carbon resources. However, this strategy has not yet been fully realized because of the mismatch between the rates of CO2 capture and electrolysis. Herein, we report a concerted system integrating CO2 capture and electrochemical conversion from flue gas using monoethanolamine (MEA) as the mediator. MEA captures CO2 from flue gas and delivers it in liquid form to an electrolyzer, where the captured CO2 is electrochemically converted into CO with concurrent MEA regeneration. The regenerated MEA is recycled to the absorber for another round of CO2 capture, establishing a sustainable closed loop for simultaneous CO2 capture and electrolysis. Owing to the low solubility of O2 in the MEA solution, the system exhibits strong oxygen tolerance, avoiding efficiency loss caused by the competing oxygen reduction reaction. By examining key parameters such as current density, electrode hydrophobicity, and CO2 concentration, the concerted system achieves a high CO2 capture efficiency of 63% for flue gas containing 15% CO2 and produces a syngas with an H2/CO = 3.2 over 24 h of operation. This work demonstrates the first MEA-based system for concerted capture and conversion of CO2 from flue gas, offering an effective strategy for sustainable carbon recycling and syngas production.


  • Open Access

    Revealing transport kinetics for efficient electrochemical conversion of captured CO 2 in amine solutions

    by Zhihui Lv, Kang Liu, Chun-Qing Yin, Lin Du, Min Liu, Xin-Ming Hu

    This work identifies bicarbonate as the reactant for electrochemical conversion of captured CO 2 in divergent amine solutions, and establishes mass transport manipulation via amine design as a key strategy for achieving high conversion efficiency.


  • Open Access

    Key factors influencing direct CO 2 capture from air

    by Ao-Chuan Zheng, Hao-Sheng Xu, Lin Du, Yan Li, Xin-Ming Hu

    The air contactor, capture agent, and method for CO 2 release and capture agent regeneration are three key factors that influence the efficiency and development of direct air capture technologies.


  • Open Access

    Insights Into CO 2 Loss, pH Effects, and Tafel Kinetics in Ni Single Atom‐Driven Bicarbonate Electroreduction

    by Lin Li, Yi‐Jie Kong, Ting Zhang, Xu Han, Kristine Aalestrup, Steen Uttrup Pedersen, Xin‐Ming Hu, Kim Daasbjerg

    Electrochemical reduction of bicarbonate offers an attractive pathway for converting captured CO 2 into valuable chemicals under mild conditions, thereby bypassing prior CO 2 release. Herein, we examine the catalytic performance and mechanism of a Ni single‐atom catalyst in bicarbonate electrolysis to CO and H 2 , emphasizing the impact of CO 2 (carbon species) escaping from the electrolyte, a critical and often‐overlooked factor in the literature that affects selectivity and efficiency. We investigate three cell configurations: (1) closed cell with no CO 2 escape, preserving reactive carbon species; (2) open cell with moderate escape, causing gradual depletion; and (3) Ar‐purged cell with significant escape, accelerating degassing and losses. In an H‐cell, however, CO selectivity declines over time in both open and Ar‐purged setups due to changes in the electrolyte. Infrared spectroscopy, pH monitoring, and quantitative carbonate‐speciation analysis indicate that loss of CO selectivity stems from the depletion of reactive carbon species (dissolved CO 2 from bicarbonate dissociation) and buffer shifts, rather than catalyst deactivation. Selectivity is restored by pH adjustment. Kinetic analyses, including Tafel slopes (∼118 mV dec −1 ) and electrochemical impedance spectroscopy, reveal a rate‐determining step in which a pre‐equilibrium chemical reaction is coupled to electron transfer to adsorbed CO 2 intermediates.


  • Simultaneous CO 2 Capture and Conversion From Flue Gas Using Bicarbonate Electrolysis Over a Nickel Single‐Atom Catalyst

    by Ye‐Bin Zou, Ao‐Chuan Zheng, Chun‐Qing Yin, Lin Du, Kim Daasbjerg, Xin‐Ming Hu

    Capturing CO 2 from flue gas and converting it electrochemically into valuable chemicals represents an appealing approach to mitigate CO 2 emissions and realize carbon recycling. Currently, these two processes are usually performed sequentially, which is energy‐intensive and involves multiple operational steps. Here, a simultaneous route is reported for capturing and electrochemically converting CO 2 from flue gas without interruption, mediated by bicarbonate electrolysis. The electrochemical conversion of bicarbonate solution, catalyzed by a Ni single‐atom catalyst, is unaffected by O 2 and residual NO and SO 2 impurities, commonly found in flue gas. This enables the simultaneous capture and conversion of CO 2 from flue gas into CO without the need to remove these gas components. Mechanistic studies reveal that CO 2 from flue gas is first captured by basified electrolyte and then electrochemically converted. The simultaneous system operates stably for at least 120 h, achieving a CO 2 capture and utilization efficiency of 60%, producing >20000 mL of syngas with a H 2 /CO ratio of ≈3, and reducing energy consumption by 25% compared to the sequential route. This simultaneous route exhibits significant advantages, including simplified operation, enhanced stability, and reduced energy consumption, thereby opening a promising avenue for direct valorization of diluted CO 2 in flue gas.


  • Integrated capture and electrochemical conversion of CO 2 from flue gas mediated by carbonate/bicarbonate cycle

    by Ye-Bin Zou, Ao-Chuan Zheng, Lan-Hui Feng, Lin Du, Kim Daasbjerg, Xin-Ming Hu

    This study reports a sustainable and energy-efficient strategy to integrate the capture and electrochemical conversion of CO 2 from flue gas by exploiting K 2 CO 3 ⇌ KHCO 3 interconversion, opening a promising avenue for carbon capture and utilization.


  • Dissecting Key Factors Influencing Electrochemical Conversion of Carbon Solutions over Nickel Single Atoms

    by Lan‐Hui Feng, Ningru Wang, Ye‐Bin Zou, Yanwei Li, Xin‐Ming Hu

    The direct electrochemical conversion of bicarbonate solutions (i.e., captured CO 2 ) has emerged as a sustainable approach for integrating CO 2 capture and utilization compared to the traditional independent and sequential route. However, the process of bicarbonate conversion is poorly understood, impeding the development of this new technology. Here, the study explores the critical factors influencing bicarbonate solution conversion over Ni single‐atom catalysts, including catalyst structure, carbon source, electrolysis temperature, and electrolyzer type. The catalyst with better exposure of Ni sites and smaller charge transfer resistance exhibits higher activity for the conversion of both gaseous CO 2 and bicarbonate solutions. In situ Raman spectroscopy and DFT calculations reveal that bicarbonate conversion follows a two‐step pathway, that is, bicarbonate dissociation to generate CO 2 followed by CO 2 reduction to form CO over Ni sites. Increasing the electrolysis temperature promotes the dissociation of HCO 3 − and boosts the CO production. More interestingly, switching the Ar/CO 2 atmosphere affects the efficiency of CO production in H‐cell but has no influence in membrane electrode assembly cell. Such a phenomenon is attributed to different CO 2 sources. This work sheds light on the electrochemical conversion of various carbon solutions and establishes the connection between the conversion of gaseous CO 2 and captured CO 2 .


  • Efficient Direct Air Capture in Industrial Cooling Towers Mediated by Electrochemical CO2 Release

    by Ao‐Chuan Zheng, Ye‐Bin Zou, Lin Du, Qiang Zhang, Kim Daasbjerg, Xin‐Ming Hu

    Direct air capture (DAC) is a promising technology for mitigating global climate change but suffers from low efficiency, small scale, and high cost due to the dilute atmospheric CO2, limited size of air contactors, and heat‐driven CO2 release. Here, we propose combining DAC with widely used industrial cooling towers to extract CO2 from the air and using electrolysis to release the captured CO2 at room temperature. We first prepare a buffered absorbent solution consisting of sodium glycinate, glycine, and sodium chloride for effective CO2 capture from the air, solving the incompatibility problem of the cooling towers with conventional absorbents. Next, we employ a three‐chamber electrolyzer for efficient release (≥95 %) of the captured CO2 with high purity (≥98 %) by constant current electrolysis at room temperature, bypassing the conventional energy‐intensive heating process. The entire DAC system can operate stably for multiple cycles, and the mechanism for consecutive CO2 capture and release is uncovered. This work reveals the great potential of running DAC in industrial cooling towers coupled with electrochemically‐driven CO2 release, opening up new avenues for curbing the increasingly severe climate change.