Xiaomiao Feng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaomiao Feng has a total of 143 co-authors. Here are the top co-authors by number of shared publications:
- Yanwen Ma
State Key Laboratory of Flexible Electronics (LoFE) & Institute of Advanced Materials (IAM) Nanjing University of Posts & Telecommunications Nanjing China
23 shared publications Ningna Chen
State Key Laboratory of Organic Electronics and Information Displays & Institute of Advanced Materials (IAM) Jiangsu National Synergetic Innovation Center For Advanced Materials (SICAM) Nanjing University of Posts & Telecommunications Nanjing China
14 shared publicationsLianhui Wang
Nanjing University of Posts & Telecommunications
13 shared publicationsRuiqing Liu
12 shared publicationsYu Zhang
State Key Laboratory of Flexible Electronics (LoFE), Institute of Advanced Materials (IAM), School of Materials Science and Engineering, Nanjing University of Posts & Telecommunications, 9 Wenyuan Road, Nanjing, 210023, China
10 shared publicationsZhendong Huang
Key Laboratory for Organic Electronics and Information Displays & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts & Telecommunications, Nanjing 210023, China
9 shared publications
Latest Publications
- 9 November 2026
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 28 (43) , 6046-6055
Layer-by-layer assembly of Ni-MOF@GO-CNTs film for flexible supercapacitor electrodes
Ni-MOF was successfully grown on GO/CNTs films via a layer-by-layer assembly method. Electrochemical test results demonstrate that the film electrode exhibits excellent electrochemical performance and mechanical stability.
- 9 November 2026
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 28 (43) , 6046-6055
Layer-by-layer assembly of Ni-MOF@GO-CNTs film for flexible supercapacitor electrodes
Ni-MOF was successfully grown on GO/CNTs films via a layer-by-layer assembly method. Electrochemical test results demonstrate that the film electrode exhibits excellent electrochemical performance and mechanical stability.
- Open Access
- 4 August 2026
- Published by Elsevier in SSRN Electronic Journal
In Situ NUS-8 Interfacial Layer Enabling Synergistic Adsorption and Size-Sieving Effects for Shuttle-Free Zn-I2 Batteries
The rapid growth of renewable energy, grid storage, and electric vehicles has increased the demand for large-scale energy storage, positioning zinc-iodine (Zn-I2) batteries as promising candidates, though their practical use is hindered by polyiodide shuttle-induced active material loss, electrode corrosion, and poor cycling stability. Current strategies predominantly rely on either chemical adsorption or electrostatic regulation alone, often overlooking the intrinsic size disparity between Zn2+ and polyiodide species. Herein, we propose introducing NUS-8 nanosheets as electrolyte additives to in situ construct a functional interfacial layer on the eletrode. This layer synergistically enables chemisorption and size-sieving of polyiodides while maintaining efficient Zn2+ transport, thereby improving reaction kinetics and cycling stability. Consequently, the Zn||Zn symmetric cell exhibits an extended lifespan of 1171 h at 5 mA cm-2/1 mAh cm-2, far exceeding that of the pristine system. Moreover, the Zn-I2 cell maintains a high capacity retention of 83.6% after 700 cycles at 2 C and sustains stable operation over 10,000 cycles at 10 C. This work provides a viable strategy for developing long-life and shuttle-free Zn-I2 batteries.
- 4 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessIn Situ NUS-8 Interfacial Layer Enabling Synergistic Adsorption and Size-Sieving Effects for Shuttle-Free Zn-I2 Batteries
The rapid growth of renewable energy, grid storage, and electric vehicles has increased the demand for large-scale energy storage, positioning zinc-iodine (Zn-I2) batteries as promising candidates, though their practical use is hindered by polyiodide shuttle-induced active material loss, electrode corrosion, and poor cycling stability. Current strategies predominantly rely on either chemical adsorption or electrostatic regulation alone, often overlooking the intrinsic size disparity between Zn2+ and polyiodide species. Herein, we propose introducing NUS-8 nanosheets as electrolyte additives to in situ construct a functional interfacial layer on the eletrode. This layer synergistically enables chemisorption and size-sieving of polyiodides while maintaining efficient Zn2+ transport, thereby improving reaction kinetics and cycling stability. Consequently, the Zn||Zn symmetric cell exhibits an extended lifespan of 1171 h at 5 mA cm-2/1 mAh cm-2, far exceeding that of the pristine system. Moreover, the Zn-I2 cell maintains a high capacity retention of 83.6% after 700 cycles at 2 C and sustains stable operation over 10,000 cycles at 10 C. This work provides a viable strategy for developing long-life and shuttle-free Zn-I2 batteries.
- 22 December 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (5) , e03289
An Artificial Interphase of Ionic Liquid (EMIMTFSI) for High Performance Aqueous Zn‐I 2 Batteries
Aqueous Zn‐I 2 batteries suffer from short cycle life due to zinc (Zn) dendrite growth and polyiodide shuttle‐induced corrosion. To address these key challenges, a multifunctional protective film of 1‐ethyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (EMIMTFSI) ionic liquid, denoted as IL@Zn, was constructed on the Zn anode surface via a tape‐casting method to improve the cycle life of Zn‐I 2 batteries. EMIM + cations preferentially adsorb on Zn, creating a water‐lean inner Helmholtz plane (IHP) and providing steric hindrance for uniform Zn nucleation, while hydrophobic TFSI − anions enrich at the surface to build a water‐repellent interface that excludes H 2 O and suppresses parasitic reactions. Moreover, EMIM + hinders iodine dissolution and forms an EMIM + ‐I 3 − dominant phase, mitigating the polyiodide shuttle and the associated Zn corrosion. Consequently, IL@Zn symmetric cells deliver over 350 h of stable cycling at 5.0 mA cm −2 . Zn‐I 2 full cells with IL@Zn anodes retain 82% capacity after 2000 cycles at 2 A g −1 and exhibit higher Coulombic efficiency (CE) after self‐discharge than cells with unprotected Zn anodes. This work demonstrates a facile strategy for aqueous Zn‐I 2 batteries that effectively addresses the challenges of dendrite formation and the shuttle effect.
- 22 December 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (5) , e03289
An Artificial Interphase of Ionic Liquid (EMIMTFSI) for High Performance Aqueous Zn‐I 2 Batteries
Aqueous Zn‐I 2 batteries suffer from short cycle life due to zinc (Zn) dendrite growth and polyiodide shuttle‐induced corrosion. To address these key challenges, a multifunctional protective film of 1‐ethyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (EMIMTFSI) ionic liquid, denoted as IL@Zn, was constructed on the Zn anode surface via a tape‐casting method to improve the cycle life of Zn‐I 2 batteries. EMIM + cations preferentially adsorb on Zn, creating a water‐lean inner Helmholtz plane (IHP) and providing steric hindrance for uniform Zn nucleation, while hydrophobic TFSI − anions enrich at the surface to build a water‐repellent interface that excludes H 2 O and suppresses parasitic reactions. Moreover, EMIM + hinders iodine dissolution and forms an EMIM + ‐I 3 − dominant phase, mitigating the polyiodide shuttle and the associated Zn corrosion. Consequently, IL@Zn symmetric cells deliver over 350 h of stable cycling at 5.0 mA cm −2 . Zn‐I 2 full cells with IL@Zn anodes retain 82% capacity after 2000 cycles at 2 A g −1 and exhibit higher Coulombic efficiency (CE) after self‐discharge than cells with unprotected Zn anodes. This work demonstrates a facile strategy for aqueous Zn‐I 2 batteries that effectively addresses the challenges of dendrite formation and the shuttle effect.
- Open Access
- 1 November 2025
- Published by Science China Press., Co. Ltd. in Chinese Science Bulletin
- Vol. 71 (24) , 5863-5876
Preparation of NiCoP/polydopamine/carbon cloth by electrodeposition and its application in supercapacitors
本文采用一步电化学沉积技术,在碳布(CC)基底上成功构建了镍钴磷化物/聚多巴胺(NiCoP/PDA)复合材料。所制备的NiCoP/PDA/CC复合材料在CC基底上表现出卓越的导电性和机械柔性,进一步探究了不同沉积时间对材料形貌、结构及其性能的影响。结果表明,合成的NiCoP/PDA/CC-20电极在4.0 mA·cm-2的电流密度下,具有1141.6 mF·cm-2的高面积比电容,对应的质量比电容为713.5 F·g-1,同时具有良好的循环稳定性。将制备的NiCoP/PDA/CC-20作为正极,AC/CC作为负极,并采用PVA/LiCl凝胶作为电解质,组装了NiCoP/PDA/CC-20||AC/CC柔性非对称超级电容器。该器件可弯折180°,并在90°的弯折角度下弯折200次,表现出优异的柔性。4.0 mA·cm-2的电流密度下经过8000次循环后,电容保持率为84.2%,库仑效率高达99.5%,具有优异的循环稳定性。此外,NiCoP/PDA/CC-20||AC/CC器件在999.3 W·kg-1的功率密度下,表现出84.7 Wh·kg-1的能量密度。
- 1 November 2025
- Published by Science China Press., Co. Ltd. in Chinese Science Bulletin
- Vol. 71 (24) , 5863-5876
Open AccessPreparation of NiCoP/polydopamine/carbon cloth by electrodeposition and its application in supercapacitors
本文采用一步电化学沉积技术,在碳布(CC)基底上成功构建了镍钴磷化物/聚多巴胺(NiCoP/PDA)复合材料。所制备的NiCoP/PDA/CC复合材料在CC基底上表现出卓越的导电性和机械柔性,进一步探究了不同沉积时间对材料形貌、结构及其性能的影响。结果表明,合成的NiCoP/PDA/CC-20电极在4.0 mA·cm-2的电流密度下,具有1141.6 mF·cm-2的高面积比电容,对应的质量比电容为713.5 F·g-1,同时具有良好的循环稳定性。将制备的NiCoP/PDA/CC-20作为正极,AC/CC作为负极,并采用PVA/LiCl凝胶作为电解质,组装了NiCoP/PDA/CC-20||AC/CC柔性非对称超级电容器。该器件可弯折180°,并在90°的弯折角度下弯折200次,表现出优异的柔性。4.0 mA·cm-2的电流密度下经过8000次循环后,电容保持率为84.2%,库仑效率高达99.5%,具有优异的循环稳定性。此外,NiCoP/PDA/CC-20||AC/CC器件在999.3 W·kg-1的功率密度下,表现出84.7 Wh·kg-1的能量密度。
- 21 July 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (32) , 13817-13829
Electrochemical deposition of porous CoMnS–PDA onto ITO/PET for high-performance all-solid-state flexible transparent supercapacitors
CoMnS–PDA electrodes were electrochemically co-deposited on ITO/PET, yielding a flexible, transparent (50%) all-solid-state supercapacitor with a wide voltage window and excellent performance.
- 21 July 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (32) , 13817-13829
Electrochemical deposition of porous CoMnS–PDA onto ITO/PET for high-performance all-solid-state flexible transparent supercapacitors
CoMnS–PDA electrodes were electrochemically co-deposited on ITO/PET, yielding a flexible, transparent (50%) all-solid-state supercapacitor with a wide voltage window and excellent performance.
- 4 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (24) , 35477-35488
A Binder-Free Metal–Organic Framework Ion Osmosis Membrane for Stabilizing a Zn Anode
Aqueous zinc-ion batteries (AZIBs) have attracted considerable attention due to their low cost and high safety. However, their development is hindered by dendrite formation and complex anodic side reactions. In this study, a binder-free zirconium-based metal-organic framework (MOF) membrane, NUS-8, is proposed as an artificial solid electrolyte interphase (ASEI) for the Zn anode, with the aim to regulate Zn2+ desolvation and deposition processes, inhibit dendrite growth, and mitigate anodic side reactions. The microporous structure and abundant functional groups (-COOH, -OH) in the NUS-8 membrane enable ion flux control through an ion-confinement effect, reducing ion transfer resistance and providing stable pathways for Zn2+ migration. These characteristics enhance the hydrophilicity of the Zn anode surface, accelerate the desolvation process, and lower the activation energy barrier for Zn2+ migration from 28.73 to 26.10 kJ mol-1. As a result, symmetric cells with NUS-8@Zn anodes exhibited a prolonged lifespan exceeding 1180 h at 1 mA cm-2 and 1 mAh cm-2, significantly outperforming bare Zn anodes (90 h). Additionally, the NUS-8@Zn||MnO2 full cell demonstrated excellent cycling stability, with a capacity retention of 72.3% over 3000 cycles at 5 A g-1. This work presents a promising strategy to enhance Zn anode performance and introduces a design approach for advancing AZIBs.
- 4 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (24) , 35477-35488
A Binder-Free Metal–Organic Framework Ion Osmosis Membrane for Stabilizing a Zn Anode
Aqueous zinc-ion batteries (AZIBs) have attracted considerable attention due to their low cost and high safety. However, their development is hindered by dendrite formation and complex anodic side reactions. In this study, a binder-free zirconium-based metal-organic framework (MOF) membrane, NUS-8, is proposed as an artificial solid electrolyte interphase (ASEI) for the Zn anode, with the aim to regulate Zn2+ desolvation and deposition processes, inhibit dendrite growth, and mitigate anodic side reactions. The microporous structure and abundant functional groups (-COOH, -OH) in the NUS-8 membrane enable ion flux control through an ion-confinement effect, reducing ion transfer resistance and providing stable pathways for Zn2+ migration. These characteristics enhance the hydrophilicity of the Zn anode surface, accelerate the desolvation process, and lower the activation energy barrier for Zn2+ migration from 28.73 to 26.10 kJ mol-1. As a result, symmetric cells with NUS-8@Zn anodes exhibited a prolonged lifespan exceeding 1180 h at 1 mA cm-2 and 1 mAh cm-2, significantly outperforming bare Zn anodes (90 h). Additionally, the NUS-8@Zn||MnO2 full cell demonstrated excellent cycling stability, with a capacity retention of 72.3% over 3000 cycles at 5 A g-1. This work presents a promising strategy to enhance Zn anode performance and introduces a design approach for advancing AZIBs.
- 29 April 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (22) , 9157-9165
Sandwich-structured PEO-based composite solid-state electrolytes for lithium–sulfur batteries
Sandwich-structured PEO–TiO2 solid-state electrolytes with high ionic conductivity and high stability have been fabricated for high energy density Li–S batteries, promoting the ionic conductivity and inhibiting the growth of lithium dendrites.
- 29 April 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (22) , 9157-9165
Sandwich-structured PEO-based composite solid-state electrolytes for lithium–sulfur batteries
Sandwich-structured PEO–TiO2 solid-state electrolytes with high ionic conductivity and high stability have been fabricated for high energy density Li–S batteries, promoting the ionic conductivity and inhibiting the growth of lithium dendrites.
- 17 December 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 21 (4) , 604-612
Synthesis of 2D NiCo–MOF/GO/CNTs flexible films for high-performance supercapacitors
NiCo–MOF/GO/CNTs thin films were prepared for high-performance flexible supercapacitors. The assembled asymmetric supercapacitor has a discharge time of 114.3 s and a specific capacitance of 11.6 F g −1 at a current density of 0.15 A g −1 .
- 17 December 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 21 (4) , 604-612
Synthesis of 2D NiCo–MOF/GO/CNTs flexible films for high-performance supercapacitors
NiCo–MOF/GO/CNTs thin films were prepared for high-performance flexible supercapacitors. The assembled asymmetric supercapacitor has a discharge time of 114.3 s and a specific capacitance of 11.6 F g −1 at a current density of 0.15 A g −1 .
- 27 November 2024
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (1) , 263-272
Electrodeposition of ultrathin NiBDC lamellar arrays as a novel binder-free electrode for flexible all-solid-state supercapacitors
The Ni-based metal–organic framework (Ni-MOF) shows significant potential for energy storage due to its high specific capacity and active sites for electrochemical reactions. This study investigates the microstructural control of NiBDC on indium tin oxide/polyethylene terephthalate (ITO/PET) by varying the electrodeposition time (NiBDC/ITO/PET). The resulting microstructure exhibits a well-ordered and uniform porous array, with NiBDC nanosheets growing into ultra-thin layers of 50 nm thickness. As an electrode material for flexible, binder-free all-solid-state supercapacitors, the NiBDC/ITO/PET electrode demonstrates optimal electrochemical performance at an electrodeposition time of 30 minutes. In a three-electrode configuration, the NiBDC/ITO/PET electrode material achieves an areal capacitance of 72.2 mF cm−2 at a discharge current density of 50 μA cm−2. Even after 2000 cycles, it retains over 90% of its initial capacity at a current density of 500 μA cm−2. The resultant symmetric supercapacitor device exhibits remarkable mechanical flexibility and robust cycling stability, maintaining over 87.8% of its initial specific capacitance after 5000 cycles. Moreover, three such devices connected in series can power a light-emitting diode (LED), demonstrating practical energy storage applications.
- 27 November 2024
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (1) , 263-272
Electrodeposition of ultrathin NiBDC lamellar arrays as a novel binder-free electrode for flexible all-solid-state supercapacitors
The Ni-based metal–organic framework (Ni-MOF) shows significant potential for energy storage due to its high specific capacity and active sites for electrochemical reactions. This study investigates the microstructural control of NiBDC on indium tin oxide/polyethylene terephthalate (ITO/PET) by varying the electrodeposition time (NiBDC/ITO/PET). The resulting microstructure exhibits a well-ordered and uniform porous array, with NiBDC nanosheets growing into ultra-thin layers of 50 nm thickness. As an electrode material for flexible, binder-free all-solid-state supercapacitors, the NiBDC/ITO/PET electrode demonstrates optimal electrochemical performance at an electrodeposition time of 30 minutes. In a three-electrode configuration, the NiBDC/ITO/PET electrode material achieves an areal capacitance of 72.2 mF cm−2 at a discharge current density of 50 μA cm−2. Even after 2000 cycles, it retains over 90% of its initial capacity at a current density of 500 μA cm−2. The resultant symmetric supercapacitor device exhibits remarkable mechanical flexibility and robust cycling stability, maintaining over 87.8% of its initial specific capacitance after 5000 cycles. Moreover, three such devices connected in series can power a light-emitting diode (LED), demonstrating practical energy storage applications.